362 models
Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Store up to 6 pairs of scissors with this knife-block inspired organizer. The channels measure 15.8mm x 22.8mm, make sure your scissors will fit before printing! I recommend adjusting the infill and set to your desired weight. The block…
Print approx. €17.21–€21.03 excl. taxPreliminary estimate for one variant
Gridfinity Holder tailored for Tonic Studios Tim Holtz Non-Stick Micro Serrated Mini Snips. This holder provides a snug home for your essential crafting tool. Contains magnet holes on the bottom and can be stacked.
Print approx. €12.33–€15.08 excl. taxPreliminary estimate for one variant
Simple solution for large scissors storage on a Ikea Skadis pegboard Shameless Money Grab: ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
Gridfinity 5x1 bin to hold two pairs of common household scissors. Can be printed without supports.
Click in a scissors holder to your Multiboard wall. Easily pull the holder out to move it to a different location. Works with lots of different sizes or scissors! Requires a Multiboard Snap to click into:…
My wife is always misplacing her small thread cutting scissors. I made this simple easy-to-print model so that she can store her scissors in a sheath on her sewing machine right were she needs them. The sheath can be mounted to the side,…
english: A Storage Unit for Gridfinity ( a System designed by Zack Freedman) which hold up to 6 scissors. Printed with Petg and 0.3 mm layer hight Deutsch: Eine Aufbewahrungseinheit für Gridfinity (ein von Zack Freedman entworfenes…
The PetG is recommended 0.2 layer height 10% infill You can insert a 3 X 10 mm nut/bolt in the joint in case you use PLA
Simple but very cute scissors-shaped earrings. Degli orecchini a forma di forbici, semplici ma molto carini.
Overview A parametric re-imaging of Horacio 's excellent HSW Cutter Holder which allows you to fully customize the inner dimensions (height/width/depth) of the holder, choose the variant style and the number of slots, and pick the…
UPDATE 2024/29/05: Added holder for stone 51,2x19,6 mm. Name is KSJ-06-06. UPDATE 2024/31/03: Added revolving grinding stone holders. KSJ-06-04 is for attaching three stones at once and KSJ-06-05 is for attaching four stones. That means…
Latest files are available on MakerWorld. Get the full Plate Print Profile: https://makerworld.com/en/models/189397 ===== A simple HSW holder for pliers or scissors. My particular style of scissors are able to snap-in upside down ===…
V2: I added a 1X6 container that holds 2 larger sets of scissors as well. This is a 1X4 Gridfinity container which holds 3 sets of scissors
A Simple remix to hold 2 pairs of scissors or pliers to your Skadis wall system. This holder works well for pliers with dipped handles. Some moulded handles may not fit as they tend to be wider. For Best results print with the flat part…
Needed to print some scissors for gifts but couldn't find any solid models, I quickly designed this one, Anyone is free to use or change. I also included the obj file if you want to change it at all. Print Settings Printer Brand:…
This is a remix of 3dball's scissor holder that can hold three scissors. How I Designed This Tinkercad source https://www.tinkercad.com/things/8gqOHpHkfzw-scissors-holder-for-ikea-skadis-x3 Category: 3D Printing
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like cables, scissors, precision pliers and probably many more. It is part of my honycomb skadis collection. It has a hex shaped pin to…
I made this holder cause I had many holders for my ikea skadis which are great but aren't made for scissors. So I made this thing that on that scissors fit perfectly. I would strongly recommend using supports. And now enjoy!
This is my "Leading Edge" Sharpening System. NOTE - The LATEST (Major upgraded) version of my system will soon be available as a ready-to-assemble kit from https://www.gritomatic.com . I will not be updating this version on Thingiverse…
After using the “Leading Edge” system for a bit, I identified several improvements and features that I thought would improve ease of use and overall outcome; the platform felt too flimsy for me, and the old style threaded inserts were too…
Quick printing holder for scissors, mounts to 1" pegboard.
The handle is optimized to stick to the flat build plate. If you are left handed just mirror it to make it more comfortable because the inner perimeter filet is not symmetric.
A basic 1x1 holder for a pair of Amazon Basics scissors and 2x Sharpie pens stored cap down. This is a double height Gridfinity box so may require magnets to stabilise (I don't use them but the holes are there).
Sheath with belt/pocket clip for the Klein Electrician Scissors 2100-7 and 21010-6-SEN. Might fit other models but is designed for those 2. The clip is 1.5" long to clip around most belts. Opening at the bottom to prevent dirt/liquid…
Disclaimer: This model is part of the Creator Program, When you purchase the hardware kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase.…
Holder to mount scissors or pliers to Honeycomb Storage Wall. Designed to fit with the original inserts and covers for a nice look. Based on the original “box” design from HSW. I made 2 versions so you can use either M4 or empty inserts.…
You have 50/50 chance to win! (or to defeat:]) You have a 33% chance of getting scissors or paper or stone:) You probably all know the rules:)
3 tool holders in one. Hold 3x Tweezers, 5x files, and a pair of scissors on your Honeycomb Storage Wall.
Settings: Made with PETG, Print-in-Place, Support as you like, I printed it without support. 0.20 mm Layer, Structural Time: about 45min (each alone) Other reliefs maybe in the future.
– EN -- Mini Sewing Scissors Clipper (snips) case. Can be used with one hand, push the small ergo with your thumb to uncap. Can be printed in PLA, I've had mine for a few months. – FR -- Mini couvercle pour ciseau de couture coupe fil. Il…
Taking inspiration from the iconic Fiskars scissors with orange handles, I did a Fusion360 cad model as I broke the handles by accidentally dropping my scissors on the floor. It is not like the original, but brings the scissors back into…
A kinetic artwork consisting of a deployable grid of scissors. Joint work with Kyle VanDeventer. As well as the print, you will need the following metric nuts and bolts: M3 8mm long x 23 M3 10mm long x 3 M3 12mm long x 16 M3 locknut x 42…
I got a free scissors from Harbor Freight Tools, I wanted a hook that would allow it to hang straight up/down. Simple, fast print, needs tree supports.
Parts are not oriented for printing. They are coming of my CAD file where they were “assembled”. Note: On my glove the left index and middle were still a bit tight. Scale up if you need.
Cosplay accessory from the Netflix series "Scissor Seven". Print the logo first (0.2mm height) and then the bolts in a different color on top.
Introducing universal holder for office scissors, designed specifically for IKEA's SKADIS pegboards. This versatile holder attaches to SKADIS pegboards, providing a convenient storage solution for your office scissors. Keep your workspace…
This a desing from 2016 of small scissors printed in ABS. Just print and clip the bolt. *The main body must be printed twice. Category: Household Supplies
A practical yarn bowl designed to keep your yarn from rolling away while knitting or crocheting. The smooth spiral slot feeds yarn effortlessly , and side holes hold knitting needles or scissors to keep your workspace organized. The model…
A small charm with added loop for mounting. Print with MSLA with minimal supports. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. A great companion to the Hair Dryer Charm!…
Needed to store my favorite plier, scissors and adjustable wrench, so I made this holder with hex divider walls. Provided design has these rooms. Left room 30 mm Middle room 16 mm Right room 26 mm The rooms can be customized in the Fusion…
This is a simple holder for rulers and/or scissors. It is similar to a lot of other ruler holders, but I needed a wider slot to accommodate a pair of scissors. I printed 2 blocks and spaced them a bit apart and they hold everything in…
https://www.oxo.com/kitchen-and-herb-scissors-361.html
Pliers and scissors holder for ikea skadis. Attached are designs without hooks for you to add as you see fit. The link to the hooks is as follows: https://www.printables.com/es/model/190617-wall-hooks-for-holes-of-at-least-45mm/files…
When I got my 3D printer, my wife askt me if I could print som protection holder for her small scissors. This scissors has very sharp tip which makes damege inside her handbag when we travel. I made this design, and she is very happy with…
Mount for my scissors on Skadis using the Skadis T-Nut system.
Larger scissors handle broke after I dropped them on kitchen floor. I didn't want to throw away functional scissors, fortunately I got right tool in my disposal! Damage assessment I took a photos of broken handle from different angles and…
Both handles (tail, and no-tail) are included. My scissors broke while I was giving myself a quarantine haircut. I scanned the broken part and whipped up a new one in Fusion360. To print, put in a pause so you can put in the metal when…
Simple 1x1 gridfinity for an Olfa L1 classic utility knife and utility scissors 112B. I printed mine in an ugly green ABS. Gridfinity specifications/ideas by Zack Freedman
6x1 Gridfinity holder for a pair of Oxo Good Grips Kitchen And Herb scissors Created with the help of the awesome Fusion 360 Gridfinity Generator add-on
This 3D Printable Scissors, as you might be wondering, does cut paper, as shown in one of the pictures that I have uploaded. But not close to as well as a real Scissors would. However, I made it as realistic as I could. I hope you enjoy…
Printed on Ender 3V2 / PLA Plus Perimeter of 4 and infill of 40% With supports standing upright
Simple holder for small scissors so you never lose them again when you need them. Needs 1 hollow insert for mounting
A simple but effective protect cap for the Victorinox Swiss Card scissors. These Scissors are meant to go into a SwissCard but you can buy the scissors alone (as a ‘replacement’) and they make a really effective Ultralight Backpacking…
Adding "L" shaped arms to a standard scissor linkage turns it into a kind of NOT gate. (Is it possible to make a scissors-based AND gate?) In addition to printing out the arms, you will also need 13 M3 lock nuts and 13 8mm M3 bolts to act…
Supports: Yes Infill: 15% Material: PLA
3 colour trophy. Used for a Games Party Night!! Produced via filament changes in gcode. White / Black / Gold. Printed in PETG + PLA gold. (due to filament availability) 😒 Infill 10%. PETG in the images wasn't properly dried, hence the…
Holder for some Klein scissors. Model is 2100-7. This works with the Gridfinity system.
I made this after I saw a similar version someone else made with 5 slots to hold files. this wasn't something I felt like I would use, so | made a new version to hold just tweezers and scissors. I couldn't find a spot on my wall I wanted…
I made these for my wife (who is a teacher) for decorating her classroom. She also does a Back to School tree with ornaments. These are mostly designed to hang from a tree like a Back to School tree, or they could be hung on a string for…
stampato in PETG, ma va bene qualsiasi materiale. semplice, da stampare con i supporti
6x1x6 gridfinity box that holds Scotch scissors. Includes magnet holes.
Wall support for scissors for up to 7 scissors. I printed it without supports (although they are recommended if you expect the holes to be perfect). My print settings: No supports 15% infill 0.2 layer size
This prints as oriented. Max bridge length is ~10.5mm, and the tolerances include this bridging. Sheath is just the right kind of snug! the orange one has a bit of holofoil laminate on it 😎
I wanted to 3d print a trophy for a rock paper scissors competition, but I couldn't find any ones I liked online. So I went ahead and designed my own and put it here as an option for anyone who is in a similar situation as I was. The…
Upgrade your barber station with this sleek and practical custom-designed tool rack , ideal for professional barbers, hairdressers, and stylists. Whether you’re working in a barbershop or managing your home setup, this tool organizer…
Skadis holder for two small scissors.
spare parts for middle size scissors; Gcode contains both parts; STL and STP files contain one part - possible adapt size and hole - after changes or export to slicer duplicate part in slicer and rotate 180° (upside down).
This is a model of a pair of scissors, which I designed a year ago. It hinges on one pin. Does not cut anything.
2026 Update: I tapered the Peg so that the further you push it in, the tighter it becomes. A very straight forward scissors hook for your Honeycomb Storage Wall. It's easy to print and uses very little material, and it fits into a hollow…
A really simple ikea skadis accessory to hold scissors with a pitch of ~27mm
Honeycomb wall holder for QUINN Assorted Scissors, 3-Piece
I've printed it with PLA, fine (0.1mm). Installation: heat the metal scissors and then push the handles on the metal bars.
A practical yarn bowl designed to keep your yarn from rolling away while knitting or crocheting. The smooth spiral slot feeds yarn effortlessly , and side holes hold knitting needles or scissors to keep your workspace organized. The model…
Protective storage for fabric scissors
This is the best scissor design
I created this tool holder for scissors and other simple tools. I printed it using white Formfutura rPLA on my Ender 3. If you have quenstions or advice feel free to leave a comment.
I designed this holder primarily for scissors, but its versatile shape also allows it to accommodate pliers and other tools with similar dimensions. The holder uses the T-Clip mounting system to attach to an IKEA SKÅDIS pegboard.…
Holder for scissors or any other things which fit like pliers etc. Fits in IKEA Skadis. Print Settings Printer: Tevo Tornado Rafts: No Supports: Yes Resolution: 0,2mm Infill: 20%
Single-piece sheath for for 4.5" Gingher Knife Edge Thread Nippers. When these scissors are left loose in a bag they remain open and can get snagged on craft materials, or worse, your hand! After a few tragic mishaps (one of which…
Share your contact info with a tap! This stylish keychain is designed for seamless NFC integration and features a bold icon with a 1mm raised design for easy AMS-free (single-extruder) printing. NFC Compatibility: Fits standard 25mm NFC…
I needed something to cover the tip. Just the tip. Tip of the scissors… from poking other things in my luggage. My slicer setting: 0.6mm nozzle 0.3mm layers Print thin walls on PLA
A nipper holder for Ikea Skadis. It's inspired by Q1's design sizes, although it is done from scratch. The universal hook is required to use it. V2: white pictures. It has decreased size and time to print. It should be printed upside-down…
Description: Here is a functional pair of scissors (to an extent) I haven't done too much testing on durability, but they can cut through paper, cardboard, and masking tape. Could be better if printed with PETG. Let me know what you…
Hanger for scissors and other tools which can be placed in space for shelf plugs.
Print ya own hinged hairdresser scissors! I made this for a jewellery project, but my printer struggled with the smaller scale. Works perfectly when scaled up though, just keep an eye on the hinge details on your print preview. Mine looks…
Gridfinity that fits a Muji Ruler (https://www.muji.com/my/products/cmdty/detail/4549738728894) and a 15cm Ruler
A loop-style holder is nice for scissors, screwdrivers, and other tools on your Skadis board. We've provided a larger 28mm inner diameter sized loop and also a smaller 24mm inner diameter loop to suit varying needs. Suggest printing with…
Replacement part for broken Victorinox "SwissCard" (TM) designed with FreeCAD PrintInfo: I've used paint-on-supports to minimize supports If it fits to tight, scaling in z-direction will help. --- Ersatzteil, um Schere aus der…
Gachiakuta - Riyo's Scissors ("The Ripper") A 3D model ready for printing as a full-size cosplay prop. Designed with a +1mm tolerance on the connecting holes for a smooth and easy assembly. 3MF file for printing should be ready for…
The repaired scissors are used and washed for more than a couple of years. And they resist! I originally printed them in ABS, but I think PETG would be better. You should place the metal end of the scissors inside the plastic pieces after…
Help me create more FREE models! If you enjoy my creations, consider becoming a supporter of my Printables club or you can buy some of my products . Your support helps me cover the costs of materials, energy, and time, allowing me to keep…
Thread snips, sewing scissors, Chinese scissors… whatever you choose to call them (they're pictured below), are quite useful. However, the ends are quite sharp and can puncture anything easily so a sheath was needed. I found a cover that…
Overview A small box I made for my wife to store embroidery thread, a small pair of scissors, and needles. The needles are held in place with magnets! If you like this, please consider clicking the ❤ button. I'd love to see your makes,…
This is a replacement blade for the Paper scissors model with a larger finger hole for bigger hands (see second picture for side-by-side comparison). The basic blade shape and joint hole are unchanged, so you can mix and match with the…
