730 models
Changes It's markedly longer + Helps the guide establish a firmer footing + Helps so your hand is less likely to catch on the cardboard; cardboard cuts are no fun It's also taller (more space between the cardboard guide and the grip top)…
A scalp massager is a perfect quick print to show of your 3D printer. The core can be printed in less than 60 minutes, and during that time you can prepare the 16 individual wires from a 3D printing filament. Printing instructions…
UPDATE V2 - 20241015: Geometrie modifiziert sodass der Griff im eingefahrenen Zustand nicht nach unten durchrutscht / Geometry modified so that the handle does not slip downwards when retracted…
Backscratcher inspired by the facehuggers from the Alien movies. I printed it using soluble supports since it's relatively thin.
This is a lotto scratcher that you can put on your keychain for easy access. Print instructions recommended settings Included in the G-Code is the recommended setting (Ultra-Fine 0.05mm) to get the sharp edge to scratch the lottery…
Remix of Brian Chu's Back Scratcher. Taken into Windows 3D Builder and edited with more prongs. Now it kinda reminds me of a rake. The original was created to fit perfectly on a prusa MK3S bed, so this one may need rotation and scaling to…
Tiny Back Scratcher Hand – Extra Long Finger Extension Product Description: Introducing the Tiny Back Scratcher Hand, a clever and practical tool designed to help you reach those hard-to-scratch spots with ease. This tiny hand slips onto…
A simpler classic back-scratcher tip for Scratch Attach! made by @design8studio . Sand down/trim seams to taste.
Fits onto a 3/4" dowel. Prints vertically with no supports.
I created my Velociraptor Claws Scratcher for everyone, who like Dinosaurs and need stylish Scratcher :-) I tried to design my new model like funny and useful tool, to can scratch on too far places, like back. I took a one original model…
Unleash your inner undead with this terrifying yet practical Zombie Hand Backscratcher! This detailed 3D model features a grotesque, decaying zombie hand, complete with gnarled fingers and eerie, realistic textures. Perfect for those who…
This is a remix of jimerb's legendary 4-function back scratcher. Please go to their page and like the model! This is a simple union of the base and handle into one long part. The length is scaled to 88% of original. It's 330mm long to fit…
The scratcher on this model tilts in all directions to keep the surface in contact during use. Design Features: Print-in-place (no assembly required for the head). No supports required. The handle is a 3/8” wooden dowel (nominal dowel…
New Version out now! -fixed bed adhesion -Bigger an more comfortable handle This screencover is only for the MK4. The cover does not scratch the screen because it does not lay dircetly on the screen. This version can be screwed together.…
This is a top that goes on a 9cm diamter scratch post pipe and is secured by a M8 bolt. The holes for putting in toys are at three different angles and are in 6mm and 10mm. If you put in a pair of F8-16M thrust bearings, it even turns.…
Size: 176mm x 752mm x 36mm Filaments: PLA Jet Black, PLA Blend Viva La Bronze and PLA Lipstick Red Note: All parts need to be glued.
What could possibly be better than a scratcher with a pivoting head ?…a scratcher with 3 pivoting heads, of course! This model is similar to my previous pivoting head design, but 3 times more satisfying. Design Features: Print-in-place…
Pets or annoying loved ones need scratching so often it makes your hands tired? Do it the Ninja way, and put a set of claws on your hands instead. Saves those tired forearm muscles! Have a little Ninja-in-training who keeps tearing up…
Hotu Matua is a central figure in the oral traditions of Easter Island (Rapa Nui). He is often described as the island's original settler and the first king of the Rapa Nui people. According to the legends, Hotu Matua arrived on Easter…
The idea of making a telescopic Back Scratcher is not bad at all. Unfortunately, the final design is bad, as usual... Let's fix it! Print instructions: Material: PLA Used Filament: Fillamentum PLA Extrafill - Traffic Red (RAL 3020,…
I'm a mechanic by trade. I don't have a back scratcher at work. Usually I find I'm reaching for a screwdriver or pry bar to get the job done. Most tools designed for dorsal itch relief look like toys, they have whimsical shapes like doll…
Used PLA on MK3S+. Print in place. if you print the parts separately, you won't be able to assemble it! . Inner ring at the main base is separated part in case you want multicolor print. Some support removal to make the hinge rotate.
Vyučující si prostřednictvím Scratch stavebnice připraví prostředí pro procvičování programování ve Scratch bez použití počítače.
A simple back scratcher, ready in one print. No supports. Tested, durable. I printed with PLA. The best effect with fuzzy skin turned on. (the option is turned on -> print settings, at the very bottom) filling density 15 - 30%
Inserts for furniture bottoms to prevent scratching of surfaces.
This rolling scratcher helps to relieve itches on any part of the body or provides a gentle wake-up massage, similar to dry brushing. It can be used directly on the skin or over clothing. There are two versions: one with a less smooth,…
This is a simple hook replacement for a back scratcher. It is meant to hang on a 3M hook.
Parameterized model for brackets to mount cardboard cat scratchers. Model provided is based on a scratcher from Vibrant Life (18"x5"x1.5"). Also includes shims for a perfect fit. Model show was printed using Spectra Blue Easy PLA from…
Lacrosse balls typically last only 2-3 weeks with daily use. They get dirty, grimy, or “greasy” with regular play and are often discarded. The Ball Scratcher (v3) was born from my son's request to extend the life and usability of his…
The Ultimate Backscratcher Let's face it, you're itchy! You're skin is crawlin! Help has arrived. Features FOUR MODES: Normal - A good ol' scratch Aggressive - For when you just got done rolling around in fiberglass insulation Pinpoint -…
Heads-up: There is now a beefier version 2, in case you have grandkids who tend to break stuff while playing with it. :-) https://www.printables.com/model/1499800-scratch-attach-printed-telescopic-back-scratcher-v This short (90 sec.)…
Simon's cat figure, scratch version and stretch version. Can be use as fridge magnet by glueing a magnet to the back. I'm a big fan of the Simon's Cat Cartoon. If you don't know what it is, check it out: https://simonscat.com/ Thank you…
Back scratcher in the shape of a crowbar . The parts can be printed in different colors and glued together. I recommend tree supports ---------------------------------- Rückenkratzer in Form einer Brechstange. Die Teile können in…
This scratching post for your cats can be installed in any corner of your house. My cats love to scratch on it. To install it on the corner of the sofa, you can stick it with some Velcro strips. It can also be installed in a wall corner…
aggressive back scratcher. no supports
Mosquitos…. They always bite in the wrong places. Here is my answer on how to scratch the back of your body when those tiny bloodsuckers find a way to get to you. Replaceable Heads This was printed with Fusion the threaded hole has the…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Do you have an itch you cannot reach? I have the solution…
I created it for my dad and thought it might be useful for others. There's a long finger one and a short finger one. Print instructions Change infill→fill angle from 45° (default) to 83° #edited 20231020
Please keep in mind that there is a license linked to this file. I have seen people selling my design on Etsy which is not allowed. I am working on a small startup company to sell these and donate some of the revenue to cat shelters.…
PLA 4 Walls 0.2 mm Layer Hand: 100 % Infill Rod: 60 % Infill, support only on the plate
A 100% 3D-printed 7.23L custom one-off Mini ITX case sporting dual 4mm tempered glass side panels, a custom watercooling loop with a 45mm thick 3x80mm radiator, and a hand-built custom pico-psu. Project log on SFF Network:…
The Ergonomic Cat Cardboard Scratcher Tool is designed for cutting cardboard strips approximately 33mm in width, perfect for creating custom cat scratchers that can be flipped and used a second time once worn down. The tool securely holds…
I made myself a back-scratcher and wanted to share the models so others could too printed on .25mm with no supports in PLA
Updated with 2 longer arm models. Now with better reach to scratch the back! I designed this compact, foldable back scratcher to place in car. Printed in PETG at 50% infill.
a friend wanted a cardboard strip cutter to make cat scratchers, I found one here but it needed supports to be printed so I decided to modify (or rather redesign) it so it can be printed with no supports. This one requires a threaded…
GIGGA SCRATCHA™: the Rolls-Royce of back scratchers. After trying plenty of back scratchers that were too short, too flimsy, too sharp, or just generally disappointing, I decided to make the one I actually wanted. The result is the Gigga…
This device is designed to print without supports and be used to cut cardboard strips to make a device for cats to claw at and scratch. This devices requires a standard utility blade and works well with an M3*10, M3*12, or M3*14 screw. An…
I needed a keycap puller that won't scratch my keycaps so I 3D modelled one that resembles the popular one with metal wires. You need to print two pullers and insert them into the holder. They have holes so you can stick a piece of…
I designed this Colt 1911 replica that is roughly the correct size if you like this please give it a like! EDIT_1: VERSION 22 is much better! it has thicker scales, and other small improvements. This prints well with if you turn it so it…
Tired of scratches in the print bed, this solves the problem, this works very well to remove the print from the print bed. It is made of PETG so if you want to use the G code you are welcome. Have used this on many prints and it works…
A design for a whimsical hand-shaped back scratcher. Cats love it. Designed to fit atop a 3-eighths-inch dowel (0.375 inches, 9.525 mm). Printed with minimal support on the backside of the hand at 0.2 mm. So far no layer adhesion issues…
Compatible with a 13mm wide ruler. Block is best printed laying on the reference surface. Bolt standing on its head. 0.4mm nozzle, 0.2mm layer Info: Old model I used to upload to Thingiverse in 2019.
Tool for a sratch lottery. Easy to print. No support needed. Print instructions Easy to print, on infill dostn't matter. With more infill will be model more durable. Feel free to share.
I printed with PETG, 0.2mm layer height, and 20% infill. In the end, the precise settings don't matter much with this model. No supports needed.
Low Poly Cat - Sculpture Take a look to my models, there you can find a lot of other low poly models. Would be happy to see your makes!
Install this to a wall corner with 3 #10 construction or sheetmetal screws (into the metal reinforced corner on most walls) This will be a 3.5mm construction screw or sometimes colloquially called “spax” in Europe. The main outer shell of…
Visit my latest design and give it LIKE! https://www.printables.com/model/1038191-low-poly-snorlax-passthrough The Ultimate Scratch Master is designed to provide the ultimate scratching experience. Whether you need to scratch your back,…
I loved the look of The Back Scratcher but found that those tiny points didn't offer as much scratching satisfaction as I wanted. So I replaced the focused tips with wide blades for maximum scratchage. And then, while I was at it, I threw…
This is a telescopic back scratcher. It's pretty easy to use. Just extend to scratch, collapse to store. When screwing the scratcher attachment on to the handle, DO NOT force it. If it is tight, lubricate the threads. Overtightening will…
To be honest, I've never owned, wanted to have or even thought about a scratcher until I saw the printables scratchers flash contest. Wanting to give myself a challange I decided to give it my best shot. I came up with the Curved…
Aquarium rake, 25cm long Rake for adjusting the substrate in the aquarium 50% infill
By popular demand we have turned an April's fool joke into an actual printable model. Guess the joke was on us! :) This was a little fun project before our actual next project/Kickstarter: Prismatic Potions Customize it with different…
This is a simple two piece back scratcher with a snap together handle. It's nothing too special. I’d recommend using a gyroid or hex infill and running the handle piece at a higher infill
Notes: Fit two parts together to assemble, then scratch away Optional loop on the end to tie a string to hang the scratcher I printed with 10% gyroid, 3 vertical shell walls for strength, supports enabled, and PLA Print them all in the…
Its a cat scratcher... print it, grab it, play with your cat with it.
Big Back Scratcher gets that itch as good as shag bark hickory! Be careful. This is not a toy. Don’t let young children play with it. Seriously. This model has a few parts. The 3 finger, 2 thumb hand; “stick” for the arm; and end cap for…
This Cat Scratch Board was designed for the 2023 Cat Toy contest [here] . I designed it in Tinkercad and printed it on my Dremel Dream Builder 3D20. This is printed in segments, so you can make yours as long or as short as you wish ^^…
v2.0 is made to be BEEFIER - it's the "I have grandkids" edition! v1.0 has 1mm thick sidewalls on the telescopic handle, while v2.0 has 2mm thick sidewalls on the telescopic handle. I kept the same outer diameter on the final by (a)…
I designed this from scratch, but inspired by another model that didn't quite satisfy my itch... pun intended! ;) I added actual teeth to dig into an itch. Now you can take this anywhere and vanquish your itches to hades! I also added…
Need a scratch your back? No problem! Print in place model with lock mechanism. No supports! From fast print with layer 0.35mm to 0.2mm work pretty well. I recommend use PETG. Easy to transport due to fold-ability! Folded version is 140…
Just a scratcher in the shape of a cat's paw! Caution! Sharpened nails!
This a U shaped tool to scratch your dog's butt. It can be used to scratch other areas but it's mainly for the butt.
It's a simple massager for heads that can help itch and relax.
This is a custom universal body/back scratcher designed for "Prusa Flash Contest". Infino Scratch is a multi purpose back and body scratcher (with easy click and release). innovative click and release design for easy extendability to any…
I hate using normal scrapers because they scratch the 3D printer bed, and plastic scrapers are not strong enough, so I made this scraper so the tip of the blade never touches the bed, but it gets very close to be effective removing the…
I cleanup the original OpenSCAD file: Removed unnecessary shapes "difference" on the finish finger instead of "by part", to ensure clean interior Added small clearance to help OpenSCAD with "difference" Otherwise, it's just the same as…
This spiral cat toy is a print-in-place design, made to securely attach to a scratching post using zip strips. It includes 7.5 mm wide strips but can accommodate strips up to 9.5 mm wide for a snug fit. The spiral shape encourages playful…
It's about 6 inches collapsed and a foot expanded. The layers can fuse at the z seam, so you'll need to minimize stringing. Enabling coasting in Cura helps. I've included a separator in case you have any trouble.
articulating cat keychain for cat lovers
No additional information is needed. Fast and easy to print.
Scratcher with 15 adjustable arms. The spider can be printed with different filament types to match your flexible/hard needs for a good head scratch. I've uploaded three versions of the arms for you: radius 70 mm // diameter 140 mm //…
Rückenkratzer für jedes Druckbett mit 250x250mm oder größer. Gesamtlänge von 31cm Universal back scratcher for print beds 250mm x 250 mm or larger. 31cm total length
No back is safe from the dreaded itch in just the wrong spot, so here we are. I'd recommend starting with the Skelly Hand kit w/ 30cm handle . Pros may go right for 40cm and the Eagle Talons . Heads with description and levels: Skelly…
It's a longer back scratcher
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is Mike, the Back Scratcher. I've been validating this design for going on six years now, and let me tell you it's a winner. Rigorous testing. There isn't much to Mike - I 3D printed a little scratchy bit in either light pink or…
Ideal gift for anyone who asks: "What do you need a 3D printer for?" Print instructions works fine if you print in PLA. no supports etc required.
A human-sized scratcher for corner mounting. Similar to the one for cats to rub against, this provides a nice surface for bear-scratching your back against for those hard to reach spots. Edit: I've also included a massage corner with just…
Made this as a back scratcher. Printed in PLA, it has a nice flex to it. Supports are not required. I used a wood dowel as a handle. The hole is threaded to squeeze the handle. Print Settings Printer Brand: Creality Printer: Ender 3…
This is a scratch post for your cat to enjoy. It is another extension for my cat playing platform. And the first non food oriented. Print out a base that suites your needs. Print 1 scratch base and as many scratch extensions as you need…
Someone recently injured themselves and has to wear a cast. I made this simple tool for them to scratch down inside the cast. It's probably not advised to do but an itch you scratch will drive you crazy and I'd rather them use something…
Update 2/5/2024 I made a large version, for farther reach. Update 12/3/2023 The 3mf and gcode files are made to be printed at 0,3 mm layer height and it is reinforced to 80% infill in the weakest places. I hope you like it, happy printing!
A (for me) well needed back scratcher when I cant reach the spots on my back, so print a couple of these and place on nightstand and coffeetable.
Additionally, it requires 5x3mm neodymium magnets and sandpaper glued on top. Inspired by Chinese Similar Wood Boxes. Illustrative photo, I'll add mine when I print it.
These brackets allow you to mount those cardboard cat scratchers to a wall. I made these because my cat (Lily) doesn't like them when they are on the ground, but she sure loves them on a wall. The things we do for our pets <3 Printing…
About this model: Many people market their print removal tools as: “Scrapers” which implies that it could cause damage to the bed, and… Scrape it. I decided to make a scratch-free scraper, with two easy to use “scraping sides”. Print…
A simple, small back scratcher. This prints quickly, without supports. The brush is intentionally blunt, because thinner bristles broke off too easily. But it could be maybe sharpened a bit, if you need something that digs in a little…
I printed it with 0,2 layer thickness and with no bottom and top layer, 3 walls. infill honeycomb 10%. There is also a second model: a water tank lid with sliding doors, which eliminates rattling and removes the need to take off the lid…
![Colt 1911 Replica prop [IMPROVED AND UPDATED] (Designed from scratch)](https://media.printables.com/media/prints/682107/images/5359823_dcc53a32-e6f6-4a88-a468-582fdfd198ad_3ca5a631-9251-4d12-81fc-f5624b52233e/large_display_8123d645-d300-4929-945e-c84d2d032276.webp)
