Search results: scx24

Sort order

290 models

P
PrintablesForker45

SCX24 Wide Beadlock Wheels

Background This print file is an extensively modified remix of Arkon Lincoln SCX24 Beadlock Wide Rims on Thingiverse by CheapAZHobbies I used PrusaSlicer to scale, remove material, & correct the geometry so it could be used on my SCX24…

Print approx. €4.12–€5.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
477
Likes
71
Rating
5
P
PrintablesSoarpix

SCX24 JEEP Wrangler body

SCX24 JEEP Wrangler body Category: R/C Vehicles

Downloads
1,562
Likes
151
Rating
5
P
PrintablesN0_Lan

Scx24 Lcg chassis

-Check out my new design here - This is a work in progress scx24 chassis. It has a slight angled skid and fully customizable skid plate angle to allow better break over angle. There is a version for all wheelbases ( I have not tested the…

Downloads
1,197
Likes
170
Rating
5
P
Printablesprintable

Axial SCX24 AX24 Driveshaft (updated)

Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…

Downloads
1,108
Likes
103
Rating
5
P
PrintablesDepep1

Tremor Chassis V2 for Scx24

This is V2 of my Tremor chassis for the SCX24 that I designed. It is a low CG-style chassis / Comp chassis. *If you are interested in selling 3D prints of this model please contact me* There are 2 versions to this chassis. A flat skid…

Downloads
1,048
Likes
176
Rating
4.75
P
Printables1_24Buddy

SCX24 Buggy

This is a work in progress scx24 chassis I have been working on for myself but have decided to list for free. It may not work with all stock or aftermarket parts, but you may be able to make alternative parts work. This was designed to…

Downloads
819
Likes
165
Rating
4.67
P
PrintablesJames Spadaro

SCX24 Trailer

This is a little utility trailer for an SCX24. I sized it to be wide enough to fit an scx24 between the fenders even with the mill stone wheel wideners. All the parts can be printed without support, except the inner axles. I have them put…

Downloads
811
Likes
172
Rating
5
P
PrintablesLiviu3D

SCX24 Stand

Update: i flipped the top pins so the axles sit right.

Downloads
794
Likes
107
Rating
5
P
PrintablesReese

scx24 flex plates

this model will lower your scx24 lower to the ground and improve the center of gravity causing less rollovers when crawling and climbing steep obstacles. i suggest you make them a little bit thicker in your slicer for better performance,…

Downloads
764
Likes
90
Rating
5
P
PrintablesJosh

SCX24 Flex Link Mod

This is the best mod for your SCX24 for only a few cents of filament! Gives your rig around 65% more flex! This is probably my most favorite mod I have ever made. To install you will want to remove your shocks from the towers and put them…

Downloads
640
Likes
58
Rating
5
P
PrintablesN3EIL

SCX24 Gladiator Rock Sliders

Mirror Object to fit both sides of your SCX24 Gladiator.

Downloads
622
Likes
62
Rating
5
P
PrintablesBrad S

scx24 wall mount

Update: Verified that the v1 remote fits. This is my take on a wall mount for the scx24. I wanted something that I could use to get my scx24 off the table and out of the way. I also wanted something that would hold the controller. I…

Downloads
573
Likes
82
Rating
5
P
PrintablesDepep1

RBX24 (SCX24 Rock Bouncer)

Here's V2 of the RBX24, Rock Bouncer 24th scale Chassis for the SCX24. Based on 2 versions of the IRL Revolution 2.0 chassis. https://www.wideopendesign.com/revolution-2-0-rock-crawler-chassis…

Downloads
557
Likes
87
Rating
0
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Basecamp/C10/JLU/Bronco

Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…

Downloads
521
Likes
69
Rating
4
P
PrintablesDerakCZ

lcg scx24 chassis

i made this chassis by myself to lower the center of gravity on my scx24 jeep gladiator , its lengt is universal so it will fit every scx24 everything is included in the pack , including rock sliders battery and esc mount are merged into…

Downloads
517
Likes
71
Rating
5
P
PrintablesChris

SCX24 - Axle Skid Plate

To help protect your SCX24 Axle housings while out Crawling around your backyard or your neighborhood. The mount will fit Stock SCX24 Axle diff covers, and will also fit Injora diff covers on Stock Axles. Mounting holes on both ends of…

Downloads
469
Likes
99
Rating
5
P
PrintablesChris

SCX24 - AX24 - Steering Link with Included Drag Link

Axial SCX24 and AX24 compatible stock width Steering Link with included Drag Link I was wanting a color matched Steering and Drag link for my Orange AX24, a few moments later I had these printing for my enjoyment, in the color of my…

Downloads
417
Likes
59
Rating
4
P
Printableshumming

SCX24 Front and Rear Axle Limiting Strap Mounts

Simple limiting strap mounts for the front and rear axles on the SCX24. Front axle is for axles upgraded to an ES08MA II steering servo with one of the typical kits. I printed in PETG for the toughness. ABS would also be an excellent…

Downloads
397
Likes
36
Rating
5
P
PrintablesYetiEngineering

TruckNut Kit for Axial SCX24

TruckNut kit for Axial SCX24. The kit is designed for the Axial SCX24 C10 but should work with other body styles, let me know in the comments. It is designed to be a fun joke to install. The trucknut holder piece should be glued into the…

Downloads
393
Likes
49
Rating
0
P
PrintablesDepep1

RBX24 (Scx24 Rock Bouncer Chassis)

Fixed a small issue with one of the roofs. Here's V2 of the RBX24, Rock Bouncer 24th scale Chassis for the SCX24. Based on 2 versions of the IRL Revolution 2.0 chassis. https://www.wideopendesign.com/revolution-2-0-rock-crawler-chassis…

Downloads
393
Likes
108
Rating
5
P
PrintablesDecentFarts

TRX4M Modular Track Part 11: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Downloads
389
Likes
74
Rating
5
P
Printablesxxqpxx

scx24 skid / trans mount

My transmission was binding on the original model. I did a quick boolean in Blender to make it work. Category: R/C Vehicles

Downloads
388
Likes
29
Rating
0
P
PrintablesDepep1

RBX24 (Rock Bouncer SCX24 Model) V1

DEPRECIATED Here is version 2: https://www.printables.com/model/279013-rbx24-scx24-rock-bouncer Here is version 1 of my RBX24, Rock Bouncer chassis for the scx24. It's based on the IRL Revolution 2.0 chassis.…

Downloads
376
Likes
56
Rating
0
P
PrintablesDepep1

Tremor Chassis Scx24

DEPRECIATED UPDATED MODEL: https://www.printables.com/model/484851-tremor-chassis-v2-for-scx24 This is a chassis for the SCX24 that I designed and 3D printed. It is a low CG-style chassis / Comp chassis. I designed this with a brushed…

Downloads
362
Likes
82
Rating
5
P
PrintablesYetiEngineering

SCX24 Low CG Battery Tray V1

Low center of gravity (CG) battery tray designed for the Axial SCX24 R/C rock crawler. The battery tray is designed to fit the Chevrolet C10 body style but should fit other bodies. Please tell me in the comments what bodies it fits. Holes…

Downloads
348
Likes
59
Rating
5
P
PrintablesLarry Kalis

Scx24 servo mount Injora 4-link

This is a custom servo mount remixed to fit a Injora 4-link high clearance links. Print with infill 100% or 99 bottom layers. Also orientate so the part so printing is upside down for clean fit with diff. link to servo i used…

Downloads
344
Likes
29
Rating
0
P
PrintablesChris

SCX24 - Crawler Course Gate Set And Stackable Cones

Here is a set of Crawler Course Gates that can be used in your scale RC crawler course builds. The gates included in this set number Gate 1, through Gate 15. Each of the numbered course gates, are a pair. Meaning each pair includes the…

Downloads
341
Likes
66
Rating
0
P
PrintablesDennis Howse

SCX24 Comanche

fixed the thickness on the hood and roof for resin printing. Category: R/C Vehicles

Downloads
330
Likes
47
Rating
5
P
PrintablesRandyLahey

Durable SCX24 Velcro Body Mount Upgrade

This is upgrade part to replace the pins on SCX24 trucks with a flat plate that velcro or magnets can be attached to. This was inspired by the mounts the newer bronco model. There are multiple adjustment points to allow more flexibility…

Downloads
325
Likes
26
Rating
5
P
PrintablesDecentFarts

TRX4m Modular Track Part 11.A SCX24

Took the amazing design from Ed which was then remixed by Dieter Spillmann and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people…

Downloads
323
Likes
68
Rating
5
P
PrintablesRunfrcover

SCX24 Chassis Stand

Chassis stand for the Axial SCX24 crawlers. One piece with tabs to grip the skid. Built for my SWB Deadbolt but should work with all models. STD version is symmetrical for all SCX24 models. Deadbolt version has the back edge extended to…

Downloads
306
Likes
21
Rating
5
P
PrintablesDecentFarts

TRX4M Modular Track Part 12: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Downloads
306
Likes
61
Rating
5
P
PrintablesRubber Duck

Finger Turn For Traxxas or SCX24 Remote

I have a Traxxas TRX4m, I drove it so much that I got tired of using two hands. So I went into Fusion 360 and fixed my problem. I would recommend TPU but PLA or something like that will work. I recommend printing the nob at 100% infill…

Downloads
304
Likes
47
Rating
4.5
P
PrintablesChris

SCX24 - Snow Plow Mount for Emax Servos with 3mm LED Mounts

SCX24 - Snow Plow Mount with 3mm LED Mounts Here is snow plow mount that will fit an EMax ES08MAII or similar servo. There are two versions of the snow plow mount in this pack. One version with 3mm LED mounts on the bumper. The second…

Downloads
296
Likes
64
Rating
5

SCX24 Jeep Wrangler Gladiator Scorpion Bumper For EcoPower_E-Max Upgraded Servo

SCX24 Jeep Wrangler Gladiator Scorpion Bumper For EcoPower_E-Max Upgraded Servo

Downloads
293
Likes
31
Rating
5
P
PrintablesDerakCZ

Scx24 competitiom body

this body is made to fit on the custom lcg chassis by N0_Lan ( the betty version) in the files is inlcuded fuel tank for mounting a magnet also there are fender that i made but they are not included in the picture ! happy printing , in…

Downloads
292
Likes
44
Rating
0
P

1:24 1980s Safari Porsche RC Body SCX24

something messed up when exporting every time and that there are some lines, I just filled them with super glue and sanded them smooth. This file fits the wheelbase of the axial scx24 C10

Downloads
285
Likes
36
Rating
0
P
PrintablesForker45

SCX24 Bronco Tow Hitch & Receiver

I designed this receiver hitch to be super glued onto the bottom of the SCX24 Bronco rear bumper. The drop hitch is removable for clearance when you aren't towing. The receiver profile matches the bumper as much as possible to reduce…

Downloads
284
Likes
43
Rating
5

SCX24 RC BODY DEUCE IN A HALF MILITARY TRUCK

Online 3D Printing Instant Quote - JLC3DP great place to have your RC body to be printed for cheap and they use resin with the printing so everything will show it detail. THIS IS A OPTION IF YOU DON'T HAVE A 3D PRINTER

Downloads
283
Likes
32
Rating
0
P
PrintablesBen

Axial SCX24 Lexus GX470 / Deadbolt 4 Link Conversion + High Clearance Links

High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…

Downloads
283
Likes
25
Rating
0
P
PrintablesRemy

Axial SCX24 Micro Crawler Stand

Chassis stand for the Axial SCX24 micro crawlers Designed fairly generic so it should fit most crawlers.

Downloads
275
Likes
39
Rating
5
P
PrintablesChris

SCX24 - Crawler Course Gate - Start/Finish Gates

Start/Finish gates intended to be used with the SCX24 - Cone To finish off the Crawler Course you will surely need Start/Finish Line gates. Multi-Color Gates can be achieved by a simple filament swap to achieve the Black-White checked…

Downloads
265
Likes
60
Rating
5
P
PrintablesNicholas Oakman

SCX24 truck body's

bodys made for scx24

Downloads
263
Likes
30
Rating
0
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Gladiator/Power Wagon

Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…

Downloads
262
Likes
29
Rating
5
P
PrintablesDepep1

SCX24 Suspension Link Pivotball With Flat End

I had an issue where my links kept falling off the pivot ball so I took some inspiration from my injora shocks and added a flat side that keeps the links from falling off. Category: R/C Vehicles

Downloads
260
Likes
47
Rating
5
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Deadbolt / Betty

I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…

Downloads
259
Likes
36
Rating
0
P
Printableshumming

SCX24 Tremor V2 Remix: Badger

I wanted to build a version of the tremor that had more clearance for shocks to be vertical without binding, and @Depep1 was kind enough to include the fusion files in his original. 2/29/2024 update - Added Step file as well as solidworks…

Downloads
248
Likes
53
Rating
5
P
PrintablesDecentFarts

TRX4M Modular Track Part 1: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Downloads
248
Likes
75
Rating
5
P
PrintablesChris

SCX24 or AX24 Shock Preload Spacers

A simple set of preload spacers that will fit the stock Shocks on your SCX24 and AX24 rock crawlers. These can be used to adjust the amount preload on your shocks, therefore adjusting ride height of your crawler itself. When used in the…

Downloads
245
Likes
41
Rating
5
P
PrintablesJan Vávra

SCX24 body Humvee

Narazil jsem při stavbě scx24 z tištěných dílů na krásnou kastli. Je jednoduchá na tisk a zajimavá. Byla by škoda jí zde nepřidat.

Downloads
245
Likes
46
Rating
5
P
PrintablesChris

SCX24 - Front Bumper - Remix

SCX24 Front Bumper - Remix A remix of a great model! The mount has been reworked and lowered to keep with the original height of the stock bumper and make it a bit easier to print. There are 3mm holes for bumper marker lights, to bring…

Downloads
241
Likes
45
Rating
5
P
PrintablesBrad S

SCX24 Brushless motor mount

This is a brushless motor mount for the scx24. It was designed for the Furitek Micro Komodo motor. The micro komodo motor utilizes a 9mm spacing between the mounting holes. It potentially could work for any brushless motor that utilizes…

Downloads
236
Likes
21
Rating
0
P
PrintablesNetrecov

scx24 low cg batt tray with esc shelf

scx24 low cg batt tray with esc shelf for use with furitek motor

Downloads
231
Likes
34
Rating
0
P
PrintablesNicksk3

SCX24 magnetic body mount

SCX24 magnetic body mount. designed for the bronco, might work on other body's V2 is installed on the photo's added 2 spacers on the side for alignment. V1 can be mounted lower if u move your esc/rx magnets are 10mm

Downloads
223
Likes
60
Rating
0
P
Printablesdeft0nes79

Scx24 Jtframe chassis rails

Custom chassis rails designed for scx24 . all mounting holes are slotted to allow fully customizable set up and tuning

Downloads
219
Likes
40
Rating
0
P
PrintablesNotDFace

SCX24 Mini Monster Truck Chassis

Wanted a Mini Monster based on the SCX24. The chassis is designed to use the same screw set as the SCX24 for mounting to the motor base plate, and I used M3 screws for everything else. I used an extended suspension arm kit to make it all…

Downloads
213
Likes
66
Rating
0
P
PrintablesIvan Stepanenko

Axial SCX24 Bronco ROCKSLIDER

Details need to be mirrored.

Downloads
208
Likes
44
Rating
5
P
PrintablesMuddledRemarks

SCX24 1/24 Scale RC Body - Bus Design

This is a custom bus design for my SCX24. It was made specifically for my rig, so it's not to scale and will probably not fit a stock SCX24. Enjoy! I printed mine with 2 perimeters, 3 top layers, 0 bottom layers, 0.75 line width,…

Downloads
204
Likes
49
Rating
0
P
PrintablesDecentFarts

TRX4M Modular Track Part 2: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Downloads
201
Likes
47
Rating
0
P
PrintablesAndrew

Axial RC SCX24 Base Camp Bed and Roll Bar

Axial left the bed looking lame so dress it up with this cosmetic accessory. Prints in 4 pieces but looks like one piece in the file. Separate it into parts and arrange on the plate per my screenshot - flat sides down. Use a smaller…

Downloads
196
Likes
20
Rating
0
P
PrintablesDecentFarts

TRX4M Modular Track Part 9: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Downloads
193
Likes
54
Rating
0
P
PrintablesShozoku Sagara

SCX24 Gladiator Rock Sliders

The original had the best scale look out of all that I found, but just wanted to add something a little bit more decorative.

Downloads
191
Likes
31
Rating
0
P
PrintablesChris

SCX24 - Cone with Flag Mount

SCX24 Cone with Flag Mount A simple traffic cone with a hole in the top to support a "Flag" of some type. I needed a way to put in some flags around my crawler course. I liked the idea of having a traffic style of cone that would hold the…

Downloads
189
Likes
48
Rating
5
P
PrintablesGumo Design

SCX24 Brushless Conversion for 1908 motor

I printed these with CFPA filament. Including the gears, they work pretty well so far. I am using FURITEK LIZARD PRO and “MZ1908D” motor from Ali.

Downloads
189
Likes
41
Rating
0
P
Printableszzubnik

SCX24 Side Plate

Side plates for the Axial SCX24 crawlers. These are similar in size to the Injora design but designed to take the materials into account. I have used these to mount the battery and radio lower for a better COG. You will need to clone and…

Downloads
187
Likes
17
Rating
5
P
PrintablesCfrazier31

SCX24 Trailer for Mini+

I currently have the Prusa Mini+. After downloading the trailer bed, I found out that the trailer bed was too large to print on the printer. I split the trailer bed in 2 pieces and created rails to act as a frame for the bed to be 1 piece…

Downloads
186
Likes
75
Rating
0
P
PrintablesDecentFarts

TRX4M Modular Track Part 4: SCX24 Customizable

4/24/24: Added two versions of a overlapping connector for changing the track width using the original models. Original: Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the…

Downloads
186
Likes
38
Rating
0
P
Printables7Point4

SCX24 Jeep Tire Mount

Tire mounts using a 3mm machine screw. Self-tapping. I used a 3mm x 5mm machine screw

Downloads
184
Likes
29
Rating
0
P
PrintablesNotDFace

SCX24 Mini Monster Wheels and Tires

Wanted a Mini Monster based on the SCX24. Designed and printed these wheels and tires for it. I'd recommend printing the tires with TPU85 or lower so they flex, and only use 2 walls at most. Print the tires with the smaller opening facing…

Downloads
179
Likes
30
Rating
0

MRC full chassis kit for Scx24 in MILLIMETERS

hello, This chassis kit will require screws that you can get with an assortment kit from hobbypark on Amazon for Scx24. May require tapping for m1.4 screws cheap tap on ebay. File is in Millimeters for printing with JLC3DP for less than…

Downloads
176
Likes
31
Rating
0
P
PrintablesGruenbaer

SCX24 front body mount with servo winch

So the original Betty B-17 bumper had a sticker depicting a winch. Unacceptable! Therefore, I present you the lowered front body mount with the possibility to add a modified servo for real winching action (short youtube film)! Servo…

Downloads
174
Likes
28
Rating
5
P
PrintablesJames Spadaro

SCX24 C10 Rear Bumper

This is a higher-clearance bumper for the SCX24 C10. It honestly primarily looks cool, but also adds a rear hitch option to go with the 3d printed trailer I made: https://www.thingiverse.com/thing:4806919 I designed it based on similar…

Downloads
169
Likes
27
Rating
5
P
Printablescaptianinsanoo

scx24 jeep flatbed

This print will hide the cut line and weighs the same as the stock body.

Downloads
167
Likes
45
Rating
0
P
PrintablesTorey

scx24 battery tray

lowers battery for the scx24

Downloads
166
Likes
17
Rating
0
P
PrintablesDecentFarts

TRX4M Modular Track Part 7: SCX24 Customizable

4/24/24: Added two versions of a overlapping connector for changing the track width using the original models. Original: Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the…

Downloads
166
Likes
45
Rating
0
P
Printablesdst4420

SCX24 Deadbolt Y Link

Y Link for the SCX24 Deadbolt. Works great on both of mine after some trimming to round the edges. It has clearance for the driveshaft. Prints to stock size. I'm not experienced enough to figure out how to bevel/fillet all the edges to…

Downloads
165
Likes
14
Rating
0
P
PrintablesRobert Posey

SCX24 low cg battery tray

I didn't put any holes for screws, I just made them with a hot needle. also you can set the rear height depending on your shocks, because it will pivot on the front mounting. I used a Bic lighter to for it a little once it was installed,…

Downloads
165
Likes
31
Rating
0
P
PrintablesDecentFarts

TRX4M modular track SCX24

Took the amazing design from Ed which was then remixed by RJ Patawaran and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people…

Downloads
162
Likes
41
Rating
5
P
PrintablesDecentFarts

TRX4M Modular Track Part 3: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Downloads
156
Likes
36
Rating
0
P
PrintablesJosh

Hitch Mod for SCX24 Trailer

So, you want to make a cool trailer for your SCX24. Well I have just a solution to for you. First download ProfessorBoot's model ( https://www.printables.com/model/649742-diy-mini-trailer ) scale it to 120% (IMPORTANT) and then print it…

Downloads
155
Likes
33
Rating
0
P
PrintablesShozoku Sagara

SCX24 Gladiator Battery Tray

I already had a bunch of 3S batteries and saw no reason to not use those during my upgrade; only problem they didn't fit well with the stock tray. This is super simple to print and prints perfectly fine flat or standing on end. It fits in…

Downloads
154
Likes
14
Rating
0
P
PrintablesDecentFarts

TRX4M Modular Track Part 8: SCX24 Customizable

4/24/24: Added two versions of a overlapping connector for changing the track width using the original models. Original: Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the…

Downloads
153
Likes
41
Rating
0
P

1:24 SCX24 Land Rover Discovery 2

Edit: Added a file for the ladder that goes on the tail door. this is a 1:24 scale rc body for a land rover discovery 2. Modeled to fit the wheel base of Axial SCX24 C10 chassis. For printing this model was split down the middle…

Downloads
152
Likes
22
Rating
0
P
PrintablesChris

SCX24 - Snowplow with Functional Snow Blade

SCX24 Snow plow with fully proportional blade allowing you to push snow to either side of your 24th scale road. Using this mount you will be able to mount this directly to the front of your SCX24. I have a FlySky FS-GT5 utilizing the…

Downloads
151
Likes
42
Rating
0
P
PrintablesSamuel Oetting
Downloads
148
Likes
18
Rating
0
P
PrintablesIan Anderl

SCX24 Radio Steering Adapter

I made this for the V2 SCX24 radio to adapt to any 7mm wheel and allow thumb-steering. You will need a longer screw Printed on a Vyper at 0.2 layer height with supports on build plate. Back side of adapter on build plate (it will import…

Downloads
145
Likes
16
Rating
0
P
PrintablesJames Spadaro

SCX24 C10 Front Bumper

This is a higher-clearance plate-style front bumper for the SCX24 C10. It does require trimming the front of the body under the grille. Front body lift post mounts will lift the front body up higher and has a spot to superglue in…

Downloads
145
Likes
20
Rating
5
P
PrintablesNicksk3

Scx24 bumper mount extention

10mm extention i needed for the cchand front bumper on my bronco

Downloads
144
Likes
16
Rating
0
P
PrintablesDepep1

Mud Wheel for SCX24

Parameterized for your pleasure.

Downloads
142
Likes
16
Rating
5
P
Printableshrafengrim

SCX10-scx24 Pro Frame conversion

downsized frame from scx10 to scx24 . skid plate included I used and battery/ESC/receiver tray I put together.

Downloads
137
Likes
32
Rating
0
P
Printablesobozeman

scx24 flat bed with roof rack

printed with 100% infill and 0.16 layer Hight.

Downloads
136
Likes
32
Rating
0
P
PrintablesDecentFarts

TRX4M Modular Track Part 10: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Downloads
135
Likes
38
Rating
0
P
PrintablesForker45

SCX24 Beadlocks for Hyrax

Background ProLine’s 1/24 Hyrax tires currently only come pre-mounted on their plastic beadlocks. The wheel width is a little narrow for my taste and results in an egg shaped tire profile. When mounted to both styles of Treal beadlocks I…

Downloads
132
Likes
22
Rating
0

scx24 gladiator snorkel

gladiator snorkel 2 versions

Downloads
131
Likes
13
Rating
0
P
PrintablesDecentFarts

TRX4M Modular Track Part 5: SCX24 Customizable

Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…

Downloads
131
Likes
34
Rating
0
P
PrintablesBoiledtea

Scx24 LGRP Comp Chassis Magnet mounts

I needed a magnet mount solution for my LGRP Comp Chassis. So I came up with this. Its meant for 12x2mm magnets, but feel free to remix it for other sizes. Just respect the license and credit my model. The mounts just go inbetween your…

Downloads
126
Likes
10
Rating
0
P
Printableshrafengrim

scx24 wire clip

a little wire clip that can be screwed onto the frame to help clean up wiring.

Downloads
125
Likes
25
Rating
0

Scx24 C10 Bumper

This is a bumper for the C10 it mounts with the holder onto the stock screws, wich hold the headlights. I made it as close as i get it to the RC4WD bumper as i could get it. The holes fit 1/10 rc lights. They just need a little sanding,…

Downloads
125
Likes
22
Rating
0

scx24 gladiator tow hitch and bumper hinge

scx24 gladiator tow hitch and bumper hinge

Downloads
124
Likes
12
Rating
0
P
PrintablesAngrysquirrel

SCX24 deeper offset rim

Printed with supports everywhere with .1 layer height, .2 initial layer.

Downloads
121
Likes
26
Rating
0