594 models
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- E3D V6 hotend section to show how a hotend…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
5-6 color print of the Earth with stand and x-section cut away Based off this Thing - Multi-Color World with Stand Space in the base to glue in this style magnet Print instructions Based off this Thing - Multi-Color World with Stand…
Print approx. €14.97–€18.29 excl. taxPreliminary estimate for one variant
Industrial Wargames Wall - Section 1 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Print approx. €8.41–€10.27 excl. taxPreliminary estimate for one variant
This is the Star Trek Section 31 Stealth Ship seen in Star Trek Discovery show. The model was designed by me in a way that the single parts can easily be printed and that you don't need to paint the model. Some of the parts can also be…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Wargame Walls Fan Room Version 2 Section 15 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Print approx. €7.11–€8.68 excl. taxPreliminary estimate for one variant
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Print approx. €16.29–€19.91 excl. taxPreliminary estimate for one variant
Wargame Walls Barricades Section 12 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Print approx. €4.51–€5.52 excl. taxPreliminary estimate for one variant
I was missing some of the Garage slats , so i reconstructed them. Please note, they are not compatible with the original ones, So you must allways use the original OR mine, you cannot mix them. Print as many as you wish. You need to print…
Print approx. €6.88–€8.41 excl. taxPreliminary estimate for one variant
Inside and Outside Corners Wargames Wall Sections - Section 3 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your…
Print approx. €7.64–€9.34 excl. taxPreliminary estimate for one variant
Wargame Walls Fan Room Section 14 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Print approx. €6.71–€8.20 excl. taxPreliminary estimate for one variant
Wargame Walls Wrecked Barrels Section 18 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Wargame Walls Pump Section 11 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the fight!…
Print approx. €6.48–€7.92 excl. taxPreliminary estimate for one variant
Pass Through V2 Wargames Wall - Section 8 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Print approx. €9.24–€11.30 excl. taxPreliminary estimate for one variant
Wargames Wall Coolant Tank - Section 9 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Print approx. €6.53–€7.98 excl. taxPreliminary estimate for one variant
Armoured Room Wargames Wall - Section 7 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
Wargames Wall Damaged-1 - Section 10 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Print approx. €8.09–€9.89 excl. taxPreliminary estimate for one variant
Wargame Walls Collapsed Pipes Section 17 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Print approx. €7.63–€9.32 excl. taxPreliminary estimate for one variant
Wargame Walls Thick Section 18 Because the fight goes on in the deep, dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part, citizen! Print these out today! Show your worth! Get back in the fight!…
Print approx. €3.90–€4.76 excl. taxPreliminary estimate for one variant
Pass Through Armoured Wargames Wall - Section 6 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get…
Print approx. €7.11–€8.69 excl. taxPreliminary estimate for one variant
Wargame Walls Collapsed Fan Section 16 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Print approx. €7.77–€9.50 excl. taxPreliminary estimate for one variant
Armoured Wargame Walls Sections - Section 4 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Print approx. €5.14–€6.28 excl. taxPreliminary estimate for one variant
Wargames Wall Blank - Section 5 Build your own wall or use them blank! Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today!…
Print approx. €4.53–€5.53 excl. taxPreliminary estimate for one variant
Initially the box was designed to sort out resistors, but I decided to make it parametric, so you can modify it easily to store any kinds of little things. The default size has 10 sections, each section can store 20 resistors. 3 boxes are…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
I've done it, everyone! I've reinvented the wheel! But seriously, this is just a simple model with a straight-forward design that seems to work well for my purposes, even if it's something I could have downloaded from dozens of…
Print approx. €6.56–€8.02 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement pull handle that fits onto a steel wire cable for a La-Z-Boy sectional recliner. The steel wire needs to have a ball end that the handle will slide onto. Included is a plug that then slots into the handle to retain…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Based on old model which we have at school. And my class teacher asked me to print a smaller ones for everyone in the class. No supports needed.
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
this model will test stringing, accuracy and acceleration control. i put my mk4 at a big disadvantage by using wet filament and pushing the speed limits
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Holder designed for the preparation of a conductive sample for SEM observation. Used in the preparation of a conductive matrix by pressure means.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
I tried to make the “sliding section fidget cube thingy” that had a few versions pop up lately… but i wanted it to be parametric. attached is a FUSION 360 file for you to mess around with and get custom sizes! NOW IN KEYCHAIN SIZE! (note…
Simple little bin that's great for storing long, skinny, things, like precision screwdrivers, xacto knives, pens, tweezers, paint brushes, etc. Overall dimensions: 120 x 77.6mm Each section is 28(w) x 46(d) x 74.6(h)mm Uses the 4mm…
This design is a streamlined, slanted 5 segmented container(4 back and 1 large front), tailored for the Ikea Skadis board. The dimensions are 230mm in length by 115mm in width, with a height of 120mm sloping down to 50mm at the front. the…
Remixed from m*bergman's excellent Stryker lineup, which is in real life a remix of the GDLS LAV 3. The LAV 6 ISC is the latest in-service version of the mowag piranha lineup, which entered service in 1974. (…
EccentricToast's model is amazing, but it didn't have enough sections, so I simply added a divider down the middle. I also included the original .3mf's for convenience, and both a .3mf and a .stl for the bottom. Blank top with no logo…
A little less boxy style pen/pencil holder to attach to your IKEA Skadis pegboard. Comes in 3 version with 2 and 3 dividers. Requires glue or 3DGloop to attach the ‘peg hooks’ to the back. Print without any supports or brim.
This deep bin has the top edge on one side cut so it can be placed in the middle section of the packout cases. The big middle bin can now be replaced with two of these. Or use three small bins on one side, and a large open half - like the…
Adapted from: https://www.thingiverse.com/thing:583489 I wanted the print to be in different colors and larger than my printbed so I printed it in parts and then painted it. Ends up I am no good with painting and even though I clamped the…
light leakage cover for the autodarts led ring. its a remix and fixing a small gap in the original model by COY5.
Quick remix of Paul's cool Under Desk Drawers with a hidden keeper so it doesn't pull out too far and a no-holes drawer option . All parts fit in a MK4/3 single print. Twisting keeper allows for less fumbles during assembly while still…
ompact travel bomb-shaped pills holder with 2 compartments , modeled using Fusion360. You can put it on your desk or bring it on the plane with you ✈ (i'm joking! eheh)
🇮🇹 Architectural Wonder This model was created by Logan MDR The original MiniWorld3D Florence Cathedral model has been one of the most popular ones for many years – here is a fresh new approach, sure to catch the attention of both…
A model showcasing the differences between healthy bone and bone that has lost some of its density through osteoporosis or time in space without enough exercise as a cross-section. The models are slightly zoomed-in compared to the actual…
The LAV III Kodiak is a GDLS development of the Mowag Piranha initially introduced in 1974. This lav 3 is a remix of the excellent m bergman's Stryker vehicle lineup, which is itself in real life a remix of the GDLS LAV 3 lineup! I've…
One day pill box with 3 sections including morning, afternoon and evening Printed on Ender 3 v2 neo 20% Infill and No Supports
Have removed the central section of jamundsen's model ( https://www.thingiverse.com/thing:459709 ) to make it more screen accurate. Supports are not needed for this model, I'd suggest printing slow towards the top. Use a 10mm brim for…
Gridfinity Divided Bin 2x3x3 2 Large 4 Small Sections.
This is an overlay tile replacement for the board game Gloomhaven. Three versions available: normal and distressed versions with and without rubble on top. Tile Count: 6 Print instructions Supports: No Resolution: 0.100mm Infill: 20%…
Due to the heigh permittable in the K2 Plus, I've made a chamber section that is double the height. From the original you will still need to get 7 of the cmag mesh files, so please support thrutheframe by visiting the original page to…
Electric Grid Wargames Wall Sections - Section 2 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get…
4 way intersection for Brio and Ikea LILLABO wooden train. Print-in-Place to make the intersection rotatable. Print settings: 0.2mm layer height slow down bridges and turn on fan (100%) PLA/PETG All credits go to LocoRico for that great…
This quick remix of nimel's great Clamp-It Clips adds: 3-way intersection for 3/4 inch boards 4-way intersection for 3/4 inch boards Slightly rounded facing corners to make it easier and cleaner to fit the clamps in place view-holes so…
Over a meter tall model of Nelson's flagship. Easily printable model with few organic supports with layers of 0.1 and 0.15 To make the rigging I used 1.5mm modeling rope and a thinner one for the linkage. To create the upper meshes of the…
This model is compatible with the lego system.
Rex - Rollback Rear Section - 1:8 scale 6x6 Read Carefully! - Rex is a modular truck system - This post is for the rollback section. More option to come - All the STL files you need to build the rollback truck is here free on…
This is a ball and socket LED lamp than can be positioned in any direction. The part that holds the LEDs accommodates strips whose sections measure 10mm x 50mm (5050). Two sections are used for this lamp so it is a strip that measures…
THE THREE-SECTION CONNECTOR ALLOWS THREE TUBES TO BE CONNECTED INTO A STRONG CONSTRUCTION
Remix of the following designs: https://www.printables.com/model/255855-brio-compatible-standard-h-cross-track by @PrintATrain https://www.printables.com/model/329413-brio-wooden-train-tunnel by @Daniel_5163…
Simple, capacious (12 x 12 x 12 cm), 4 sections organizer for cotton buds and pads. To fight the mess in your bathroom :) I also attached some optional covers. Print instructions Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
this a lego train track intersection [for legos only not duplo] I hope it helps you will need to break off the little tabs at the end of each rail print setting supports:no infill:15% filament:pla printer:prusa mk4
Opened up the full hexagons so can be use for connector inserts for CANBUS, fans, ERCF, PG7, & filament sensors. For inserts use these: https://www.printables.com/model/790873-voron-24-skirt-connector-insert-for-canbus-fans-er
Credit to https://www.printables.com/@nleinad and https://www.printables.com/@QuentinL_4378541 for the originals. Here I have added some sectional threaded baffles. The idea was to have a separate printable section so you could add as…
I had a hard time printing the filtered base in PETG, as it didnt like the tiny holes. I opted to redesign that part to have slots instead. it now resembles more of a floor drain design and should be easier to print in PETG.
This is a replacement or addition section for Glow Tracks. If you want to add some more sections to your existing Track, or to replace some missing parts, this is the way to go! I made a model with custom supports to provide a perfect fit…
Rail section off of https://www.thingiverse.com/thing:5332248 Category: 3D Printer Accessories
Sta Trek Discovery Badge for Section 31. Print it at 150% for hand badge (Section 31 really never use the badge in the uniform) Print it standing in two colors, then join the parts.
I wanted to make a food dish for my crabs that had different sections so I can see what they like. They really love popcorn so I made the center section as a kind of treat section and then the other main sections for hardier foods. I…
pencil cup (v2!!) my sister needed a pencil cup so I decided to make a variation of my gridfinity tray into one. like that, this has an outer, gridfinity-compatible base, and three removable inner cups. the two smaller internal cups are…
Train Track Intersection IKEA/BRIO TrainTrackIntersection_v2 is a better fit. Category: Other
This model is compatible with the lego system.
You should print 6 of the disks, 3 of the tubes, and 4 of the plugs. Then assemble them onto an EEW 6.x bobbin. The plugs get inserted to hold these from spinning on the bobbin. Then you can spin small amounts of different singles onto a…
My mod for “ Under Desk Drawer by Paul ” the same mounting holes.
Gridfinity Divided Bin 2x4x3 Off Center 2 Sections.
Print with supports to achieve best fit of the interface between sections. The photo shows the similarity between the part 3d printed in white PLA, and the original that was used for inspiration in grey.
About: Magnetic HEPA filter for the X1C which attaches to the exhaust fan in the back. This almost el i minates the PLA/PETG smell as well as making the fan significantly more quiet. This model has an index point for the proper alignment…
These are a series of walls i designed to work with and compatible with Dutchmogul's delving decor dungeon walls they connect to them but not perfect. when i made thess back in june there were not many options for cave walls so i made…
First model uploaded. I couldn't find a mail holder I liked with enough slots or that needed to not be secured to anything. So I made this on Onshape. Slicer was Creality Print. Printed on a K1C at 50% infill, high quality .25 and slow…
Picked up model from mathhappens.org and used Tinkercad to add text. Printed on white Anycubic PLA and used black acrylic color
Gridfinity Divided Bin 2x4x3 2 Large 4 Small Sections.
This model is compatible with the lego system.
This piece links up to existing Lego tracks. To secure this piece to existing track, I used 1x2 plates on either side of the railroad ties.
Thin board cut into 4 pieces with box. Requires super gluing of black black tiles onto the board. Fits on ender 3 print bed. Chess pieces in picture are the spiral chess set at 60%: https://www.thingiverse.com/thing:470700 Category: Chess
Print with supports to achieve best fit of the interface between sections. The photo shows the similarity between the part 3d printed in white PLA, and the original that was used for inspiration in grey.
Designed for 20mm x 20mm box section tube often used for the x-axis gantry beam on corexy printers. Some tubes have relatively wide dimensional tolerances due, for example titanium tube might be 20mm +/- 0.3 mm - so anywhere from 19.7 to…
Gridfinity Divided Bin 2x3x3 Off Center 2 Sections.
I used meshmixer to separate the shells and curled the long 17 section gator so it can be printed on a smaller print bed. Mine is 220x220 I changed the orientation and added supports to the bottom so it could be curled and printed on…
This model is compatible with the lego system.
3D parts for Starship S24 papermodel for the AXM Paper Models website. Parts consists of the Raptor engine floor, 3 sea level Raptors and 3 Raptor Vacuum engines. Scale is 1:100 How to print: no need for supports. The only file that needs…
(For smaller illustration models, look here: https://www.printables.com/model/675613-steel-profiles-illustration-models ) All STL files are according to standards shown below. Print info: - All stl's are 100mm in height - Print upright,…
3D model of the SuperHeavy B7 engine section with skirt and Raptors for the B7 papermodel from AXM Paper Models website. It consists of the engine skirt and Raptor covers with nozzles. B7 has 33 Raptors. How to print: the only file that…
Large picture frame printed in sections. The following sizes are available for download: 297mm x 420mm A3 portret 420mm x 297mm A3 landscape 300mm x 398mm poster size Can be printed without infill and all parts are clicked together.…
Flared radiator section for USA Trains SD70MAC. This is style found on the later units with 4,300 horsepower. No body modification needed as this will slip over the existing air intake louvers however in order for this to sit flush, you…
Ruined stone modular section Introducing the Ruined Stone Construction, a meticulously crafted and versatile miniature terrain piece designed for epic tabletop battles in games such as Mordheim, Warhammer, Dungeons and Dragons, and more.…
This model is compatible with the lego system.
This model is compatible with the lego system.
Split your packout trays into 4 sections with a divider that locks into place. Works with Milwaukee 48-22-8431 PACKOUT Low-Profile Organizer Your support is greatly appreciated as it enables me, a solo designer, to offer models for free.…
3D parts for Starship S28 papermodel for the AXM Paper Models website. This engine section is good for Starships S25, S26, S28, S29, S30 and S31. Parts consists of the Raptor engine floor, 3 sea level Raptors and 3 Raptor Vacuum engines.…
There is something mesmerizing in the sound of railroad car wheels clicking as they pass through the diamonds of railroad track crossovers. Here is a crossover section for use with the Hume track system. See…
This design is a streamlined, slanted 8 segmented container tailored for the Ikea Skadis board. The dimensions are 230mm in length by 60mm in width, with a height of 90mm sloping down to 50mm at the front. My initial prototype featured…
These are straight sections for LED “neon” strip, I was looking for something to hold the strip in straight sections in my 3D printer enclosure but couldn't find anything for LED Neon so I made these myself in Onshape - this is my first…
