25 models
Mit diesem Gehäuse, lässt sich unser Bewegungsmelder Modul 5V, leicht für viele Anwendungen montieren. Die versenkten Befestigungsbohrungen sind für unsere Modul-Befestigungsschrauben M3 geeignet und ermöglichen eine dezente Montage ohne…
A word of caution This project is currently unmaintained, as ESPHome keeps introducing new breaking changes with every monthly update that require continuous rework, testing and debugging. This has been an issue from the very first…
I have used the two linked code bases to add some features to it. They include the following: Wifi Icon in the top left. (Red if disconnected, green if connected) (only page 1) Time and date in the bottom right [DD/MM/YYY] (NTP enabled),…
Complete remix, no visible screws, easier to assemble, better temperature sensor placement, 2 LCD types and 2.7 E-Paper.
Modified serial carrier with pass through for relocating the AHT20+BMP280 sensor using Billy Williams relocation mount .
One shortcoming of the Sensorbox v2 is the placement of the AHT20+BMP280. When placed in it's intended location on the PCB, it measures temperatures significantly higher than ambient, also throwing of humidity measurements. This part is…
This code has been moved to GitHub where all future updates and releases will be made. Due to breaking changes in recent ESPHome versions, you'll need to use the current version of this configuration code from GitHub for ESPHome versions…
Updated serial carrier for PCB SBr1.1 that has a hole for the SCD40 sensor.
Modified serial carrier for the Sensor box v2, easily mount the PMS5003, the ZE08-CH20 and the MQ-7 sensors
Remix of a temperature+pressure+humidity sensor mount dedicated for Sensorbox v2. Mounting horizontally with sensor facing downwards should yield the best possible accuracy due to natural convection. That's also how Air Gradient has its…
Inspired by another remix, pins for SHT40 and AHT20/BMP280 are cleared from the carrier, allowing to use any other sensor (in my case BME280).
The Sensorbox v2 shell has a button on top that interacts with a microswitch on the PCB. the original design did not work in my build, likely due to my use of a touch screen. This model is a modified version of the Sensorbox v2 Shell r3.…
This is a quick remix of the original spacers used to mount the screen on the sensorbox PCB. The holes are larger in order to use M3 threaded inserts. 2024-03-24 Following a comment, I added STL files with Ø4,5 holes (instead of 4,2…
A Bracket to hold a Sensiron SPS30 particle sensor. The Bracket can be glued onto the SerialCarrier of the SensorBox (V2) . The Sensirion SPS30 is only snapped in. The Bracket respects the design rules from the Sensiron datasheets and…
Mount base for the ZE08-CH2O formaldehyde sensor and optional Buzzer module designed to be used with the 3D Printer Emission Sensor Array (SensorBox V2) . The original design attached the sensor directly to the carrier module using…
Bracket for digital CO-Sensor ZE07 from Winsen integrated in serial carrier r2.1 or as separate part, that can be stuck on an existing carrier by double sided tape. Yaml code modified to support ZE07 and display CO values. I used the UART…
Sensorbox zur Aufnahme von PH und Redox Elektroden des W-Lan Messgerät PH-803W. Hier wirdin einem Pool die Wasserhärte und Desinfektionsmittel gemessen und es kann auch über Schlauchpumpe oder Ventil die Zustellung automatisch geregelt…
Modification of @Fabian_309043's modified serial carrier, to allow clearance for the SBR 1.1 boards.
Imho the original opening pattern is a bad choice for good printability. I have reverse engineered the original casing (Shell r3) and changed the opening pattern so it is printable without supports. I reduced overhangs as much as…
The only part I basically remixed here is the LCD spacer. You will need M3 bolts and M3 threaded inserts. Threaded inserts are used for the back plane. the LCD spacer from both ends. Use the original LCD spacer if you don't want to use…
Adjusted to fit the 2.4" variant of the display. The fit is “good enough”, not perfect.
I made my Air Monitor with 3D printing in mind. Because I do use ABS and ASA monitoring, Formaldehyde seems a must. Some code is sensor-specific but easily changed With " reboot_timeout: 0s " ,( no "s ) in both the api: and wifi:…
This is simple remix of original "Shell r1" with solid screen bezel (as I like it more) to allow it for wall hanging.
A Bracket to snap into the sidewall of the SensorBox V2 that holds a light-sensor module TSP2561. I connected the sensor module via I2C, using the port for the ENS160 on the print v1.1. The sensor controls the brightness of the display.…
This design is still Work in Progress, be carefull if you want to test it... This is a new case design for the 3D Printer Emission Sensor Array (Sensorbox v2). The original case is really nice but a bit long to print. This new version is…
