Search results: shaker

Sort order

796 models

P
PrintablesHerrHonigmann

DF64 Grinder Blind Shaker / Cup Holder - 74 mm (MHW-3BOMBER Dosing Funnel)

Holder compatible with a blind shaker up to 74 mm or the original DF64 Metal Coffee Cup. Diameter: Up to 74 mm Attachment: Uses the original screw from the portafilter fork Features: Slot for a 10 x 1 mm magnet at the base Blind Shaker:…

Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant

Downloads
154
Likes
9
Rating
0
P
PrintablesPeter Farell

Salt and Pepper Shaker Ray Gun.

Salt and Pepper Shaker Ray Gun. I would use TPU (Ninja Flex) for the end butt. so its like a rubber stopper. My feeling is that would stick better.

Print approx. €8.09–€9.89 excl. taxPreliminary estimate for one variant

Downloads
83
Likes
38
Rating
0
P
Printablesnyknyc

Shaker Bottle Dryer - Model Fir

Simple shaker bottle dryer that looks like a fir. Easy to clean and to take with you when you're traveling or commuting, because it consists of two flat pieces.

Print approx. €1.39–€1.69 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
4
Rating
5
P
Printablessiljelb

Egg salt shaker

Egg shaped salt shaker with screw in bottom lid. Print in PLA with 0.10 mm layer height, supports on build plate only, random seam position, and scarf joints. The photo is printed based on a lower quality mesh, and isn't as smooth as…

Print approx. €3.94–€4.82 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
4
Rating
0
P
PrintablesAtomicVirology

Microcentrifuge Tube Thermo Shaker lid

This is a lid for Grant PMHT PSC24N thermo-shaker microcentrifuge (Eppendorf) tube incubator. It's handy for keeping tubes nicely heated and/or minimising environmental contamination if you're using open tubes. Two models are attached, a…

Print approx. €4.04–€4.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
5
Rating
0
P
PrintablesKongolasse

Paint shaker holder for Vallejo 17ml

Paint shaker for Vallejo 17ml bottles. If you have a Proxxon jigsaw (28092), you can also use it as a paint shaker. Maybe also works with other models, the arm of the saw must have a thickness of 9.7mm then the holder will fit. Update V3…

Print approx. €1.60–€1.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
6
Rating
0
P
PrintablesPolarts

LEGO-Compatible Salt Shaker

LEGO-Compatible Salt Shaker This model was designed to be fully compatible with the official LEGO Salt and Pepper set . I made it because I wanted to make the same design available in more than just black and white. Please don't use it as…

Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant

Downloads
20
Likes
7
Rating
0
P
Printablesbollibe

salt shaker lid with 4 positions slide - couvercle à glissière à 4 positions pour une salière

salt shaker lid with 4 positions slide - couvercle à glissière à 4 positions pour une salière

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
4
Rating
0
P
PrintablesCardinalSong

633a Saltshaker Mic Clip to On Stage Quick Connect Female

I bought a saltshaker mic last week and needed a way to connect to the quick connect system (On Stage QK2) that all of my stands are on….so here we are. If you have a 633a, it should work. There were multiple manufacturers (Altec, Western…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
2
Rating
0
P
PrintablesHLFR ENGR

Salt Shaker Holder

Designed for Hanno Fluted Wooden Salt Mill from Create & Barrel but will work for any 2.25" shakers

Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
2
Rating
0
P
PrintablesDrJones

Shaker siphon for garden hose

If you want to empty a barrel etc using a siphon but find it uneasy to start the siphon - this is an easy way to do so. This shaker siphon is a actually just a valve. By shaking it down into the water (or other liquid), that water can…

Downloads
20,979
Likes
9,236
Rating
4.91
P
PrintablesArgiCZ

Mechanical Salt and Pepper Shaker

Pair of salt and pepper shakers designed to mesh together and turn as gears upon their stand. The bottom is threaded to fill the shakers. Enjoy and happy printing! :-)

Downloads
3,540
Likes
778
Rating
4.95
P
PrintablesPointNemo

Outdoor Salt and Pepper Shaker

Shaker Sizes (Diameter x Height): 42 x 35 mm 42 x 50 mm 42 x 65 mm Grids: small, medium, large, open closed, small, medium, open closed, medium, large, open Lids: plain “S” for salt “P” for pepper “C” for chili, curry “O” for oregano…

Downloads
2,032
Likes
410
Rating
4.94

Salt and Pepper Shaker, Salzstreuer

Salt shaker in a kind of spiral design. I printed the salt shaker in PLA with a leyer hight of 1,5mm. The cap for the pepper shaker has only five holes (Model also attached). Important: If the screw cap is difficult to turn at first,…

Downloads
2,022
Likes
220
Rating
4.93
P
Printablesmodsmthng

blind shaker : donut 58mm 57mm 54mm 51mm 49mm Flair Pro 2 (45.5mm) Flair Classic (Donut espresso shaker / donut espresso shakr)

The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…

Downloads
1,824
Likes
208
Rating
4.91
P
PrintablesJoe

Shaker siphon for garden hose

I've added one version with a inbuilt nut and another with knurling. The internal valve should be printed with 100% infill. The included .gcode files are configured to print the valve at 100% infill, while the outer body is set to 4 walls…

Downloads
1,817
Likes
153
Rating
5
P

LEGO Brick Sorter / Sorting Shaker (Mini Version)

Edit: We've update the original to now include a revised mini version including: * Better stacking so the lid fits when both stacked and collapsed * Less printing time * Rounded Edges Get the new version here >>…

Downloads
1,477
Likes
250
Rating
4.88
P
PrintablesA2S_dESIGN

Paint shaker

When you have to shake paint cans, this is the best tool. Hold the shaker onto any battery-powered screwdriver, open the lid, insert the jar upside down, close the lid, and press the button on the screwdriver. The paint will be agitated…

Downloads
1,393
Likes
468
Rating
4.74
P

LEGO Brick Sorter / Sorting Shaker (Read Comments)

STOP - BEFORE YOU PRINT THIS MODEL - CHECK OUT OUR NEW AND IMPROVED DESIGN HERE: https://www.printables.com/model/327900-stackable-lego-brick-sorter-sorting-box We store a lot of our LEGO bricks in two types of Ikea Containers, the Sanla…

Downloads
1,199
Likes
194
Rating
4.83
P
PrintablesPatrun

Travel salt shaker

PLA material chip 0.4mm printed without backs layer height 0.15 mm two sieve sizes 2mm and 5mm

Downloads
1,095
Likes
187
Rating
5
P
PrintablesPyrex

Kitchen Salt Shaker

Get tired of refilling shakers every other week? Here's a larger capacity shaker that should go longer. A shaker for anything you want to put into it. The cap holes should be correct for most mid grain salt consistencies, but that will…

Downloads
1,020
Likes
112
Rating
5
P
PrintablesTibu

Paint shaker

This is a mixer for model paint like Vallejo you still need a type 608 ball bearing Notes: for more stability in the drill chuck i have printed part2 with 100% infill

Downloads
903
Likes
223
Rating
4.94
P
PrintablesAdafruit

Crickit Lab Shaker

Full tutorial: https://learn.adafruit.com/crickit-lab-shaker/ Build a lab shaker to agitate parts with PVA supports! This DIY shaker uses an Adafruit Crickit, Circuit Playground Express and DC motor. The speed is adjustable with a…

Downloads
854
Likes
114
Rating
5
P
PrintablesNaitsabes

Travel salt shaker / Solniczka na podróż

travel salt shaker / salt and pepper for travel Solniczka i pieprzniczka :) zamykane pojemnik - szczelnie zakręcane, które na pewno nie otworzą się w plecaku czy torbie, bo są szczelnie zakręcane. / Salt and pepper shakers :) — secure…

Downloads
845
Likes
364
Rating
5
P
PrintablesMearcat

Paint can shaker/mixer for hand drill

This is a simple shaker/mixer that attaches to your hand drill (corded/cordless) to drastically speed up the time it takes to mixing of a can of spray paint. No longer do you have to shake the can manually for a minute or more. I've…

Downloads
844
Likes
177
Rating
4.86
P
PrintablesMarvin Deppe

Eccentric paint spray can shaker/mixer for your drill

This is a convenient paint shaker for spray cans. It consists of a hollow cylinder with an elongated hole at the bottom. There are two sizes availabe: 55mm (works for smaller cans like those from Edding) and 68mm (works for most other…

Downloads
808
Likes
155
Rating
4.86
P
Printablesearlmckay

Salt shaker / pepper shaker

Feel free to support my work and leave a tip.

Downloads
786
Likes
70
Rating
4.75
P
PrintablesAntonio

Vallejo bottle shaker adapter

This is an adapter to use with the massage gun so popular right now. I'm not sure if the massage-bits are universal among the several gun-models, but the support diameter is about 18/19mm. In any case, the rubber gasket need to be applied…

Downloads
753
Likes
126
Rating
4.83
P
Printablesfirstgizmo

Keychain Salt and Pepper shaker

Fill one side up with pepper and the other one with salt. By twisting the plugs, you can open and close the slit on the shakers side, to dispense some flavour on to your meal It is best be printed in its given orientation but due to its…

Downloads
714
Likes
265
Rating
4.86
P
Printableslzlesak

Cap for shaker

Replacement for lost cap for standard 300ml shaker. I recommend printing with PETG material using "ironing".

Downloads
697
Likes
30
Rating
4.57
P
PrintablesAJ Quick

Spray Paint Can Shaker for Reciprocating Saw

Allows you to strap in a can of spray paint and attach to a reciprocating saw blade and install in a reciprocating saw such as a "Sawzall". You will need a hook and loop strap as well as #10 or 4mm bolts and a spare blade. Print Settings…

Downloads
671
Likes
83
Rating
4.75
P
Printablesjagerman

Road salt/ice melter shaker

Two things happened to me recently: I moved out of apartment into a house where I have to shovel and salt my own driveway and walkway; and I bought a 3d printer and learned OpenSCAD. This was my first OpenSCAD model partly to teach myself…

Downloads
581
Likes
108
Rating
4.86
P
PrintablesSINGH DESIGN

Shaker Siphon for Garden Hose V2

Garden Hose Shaker Siphon with Quick Release version 2 This practical Shaker siphon has an integrated valve that allows you to empty any container containing liquids. It is designed to be compatible with garden hoses of different sizes…

Downloads
559
Likes
137
Rating
4.86
P
Printablesbvbreukelen

Blind Shaker for Coffee

This is a blind shaker used to de-clump coffee grinds. As shown in the video by Lance Hedrick. The method seems to be working even better than WDT. It's my first version of this Blind Shaker - Printed in PLA however PETG will also work. -…

Downloads
535
Likes
46
Rating
5
P
Printables3DPrintBunny

Egg percussion shaker rattle

Egg percussion shaker rattle It prints in one piece with the beads sealed inside the egg. Once printed just drop the egg onto a hard surface a couple of times to free up the beads and start shaking :) See it in action here:…

Downloads
518
Likes
84
Rating
5
P
PrintablesCatja

Studio Shaker, Threaded

Designed this mostly for fun and because I couldn't find anything else like it. A simple but versatile percussion instrument with a hexagonal pattern grip surface. Depending on what you fill it with, you change the nature of the sound it…

Downloads
515
Likes
161
Rating
5
P
PrintablesUnavail429

Blind Shaker - Espresso

Overview Inspired by the Weber Workshops blind shaker , I have created a 3D-printable version for those of us who want to experiment with a different distribution method! This tool is intended to help homogenize grounds via agitation.…

Downloads
482
Likes
75
Rating
4.75
P
Printablespachek

🝰 Salt & Pepper Shakers 🝰

Salt & Pepper Shakers

Downloads
481
Likes
70
Rating
5
P
PrintablesMorisu

Magic Wand Salt Shaker

A fun salt shaker to embellish your kitchen. Also usable for pepper. Happy printing!

Downloads
478
Likes
65
Rating
4.5
P
PrintablesTheAbidingOne

Salt Shaker

Small salt shaker. nice dosing of salt. Original file has a high of about 60 if assembled. Print instructions Hmm no speciffic instructions.

Downloads
475
Likes
38
Rating
5
P
PrintablesE3De

Tiny Cocktail Shaker

Tiny Shaker in 1/6 Scale for doll cocktail party. Printing from PLA, without supports, layer height 0.2 mm. + Ice Bucket with Lid, Tongs, Cutting Board, Cocktail Tray and Sticks I used mini glass beads for the drinks, and 3mm cube-shaped…

Downloads
466
Likes
183
Rating
0
P
PrintablesDaniel Tacken

Massage Gun Miniature Paint Shaker attachment

This paint shaker attachment fits into massage guns with an approx. 19.5mm “hole”. This model was specifically designed for a an Aeros Recovery massage gun. Two grommets of appropriate size are needed to help secure the attachment in the…

Downloads
465
Likes
40
Rating
0
P
PrintablesREDZC

Salt Shaker Pepper Shaker Salt Jar Salt Box Salt and Pepper Jar Pepper Box Kitchen Peprenka Slanka easy printable without suport

Holes in cup 2mm(H) 2,5mm(I) and 3mm(J). Jars diameter cca 40mm, volume cca 80-90ml. Walls thickness 2mm. For salt recomended J2 cup, for pepper H2. Filament need for shaker (jar with cup) cca 12m. Tested PLA 0,2mm, random seam. Spice…

Downloads
441
Likes
69
Rating
5
P
PrintablesTomKnox

Lunker City Shaker - Mold & Replica

Print the mold in a harder material. PLA or ABS is fine alternatives. Print the bait seperately in a flex material. TPU is not the best option for lures but it works well enough. You can support my work and buy me a coffee here: Buy me a…

Downloads
441
Likes
85
Rating
5
P
PrintablesLooseLunch

Vallejo Paint Shaker for Drill

A redesign of Marcel Metzen's Paint Shaker for a jigsaw that I adapted to fit into a drill chuck. The paint bottles should fit snug in the shaker. Supports: Yes Perimeters: 4 (for strength in the drill chuck) Infill: 30% (haven't tested…

Downloads
428
Likes
45
Rating
3.33
P
PrintablesMellow

Massage Gun Meets Paint: The Auto-Shaker!

Massage Gun Meets Paint: The Auto-Shaker!

Downloads
415
Likes
90
Rating
0
P
PrintablesZimlorog

Reciprocating Saw Paint Shakers

Tired of shaking paint bottles by hand? Don't want to fork over $30 for a nail polish shaker? Rather fork over $50+ for a saw? Already have a reciprocating saw? Then these are the attachments for you! Have a paint bottle you want an…

Downloads
412
Likes
35
Rating
5
P
Printables3d Print Hub

Salt Shaker

How did I designed this model ? : watch the tutorial A salt shaker is a common kitchen tool used to dispense salt onto food during cooking or at the dining table. Typically made of glass, plastic, or metal, salt shakers feature a…

Downloads
390
Likes
36
Rating
5
P
PrintablesWillie Designs

Universal Paint Shaker

Description: This is a universal hobby paint shaker I designed to solve a simple problem. Shaking hobby paint. It is designed to be used with a reciprocating saw. It may also work with a jigsaw though I have not tested this and may…

Downloads
376
Likes
99
Rating
5

Custom Shakers - Salt Pepper Herbs

I made some good examples but encourage you to set your own!

Downloads
362
Likes
134
Rating
4.75
P
Printablesschleprocker

Vortex Mixer Paint Shaker for Drill - Vallejo/Army Painter/etc Bottles

Took inspiration from this Vortex Mixer and modified its parts to fit my hand held drill instead to mix my miniature paints, vallejo/citadel/army painter/etc. https://www.thingiverse.com/thing:534894 This requires two hands. One to hold…

Downloads
354
Likes
60
Rating
4.6
P
Printablesfutureconstruct

Testors Paint Vortex Mixer Spinner Shaker Drill Attachment

Stirs up the paint in a few seconds (ok, depends how old your paint is lol) Intended to be “pulsed” a few times so that acceleration and deceleration mixes the paint, along with the bottle being square. Printed in 31 minutes with my 0.6mm…

Downloads
344
Likes
64
Rating
4.33
P
Printablesc4tkybnm

BETTER 8020 simrig bass shaker mount

V3 UPDATE 11/12/24: Added reinforcement across the whole lip. ------------------------------------------------------------------------------------------- V2 UPDATE 25/10/24: Due to excessive clatter on the 8020 profile, I've added a…

Downloads
338
Likes
33
Rating
0
P
PrintablesMartin Majewski

Fanatec CSL Load Cell Brake Adapter for the Simagic P-HPR Haptic Shaker

Description Sim racing is cool, but gear is expensive. That's why I try to get the most out of the most affordable stuff and build up my rig this way. Simagic has a relatively open ecosystem and provides the P-HPR force-feedback…

Downloads
333
Likes
23
Rating
5
P
PrintablesMarko

Rub/Spice Shaker

I wanted a decent bottle for my BBQ rubs. The grate style top, breaks up any clumps. Works really well Category: Kitchen & Dining

Downloads
328
Likes
62
Rating
4.75
P
PrintablesMax Mustermann

DF64 Grinder Blind Shaker / Cup Holder

Blind shaker / cup holder for the df64 coffee grinder. Simply attach with the original screw. If you like, you can glue a 10x1 mm round magnet at the bottom. The maximum diameter for the blind shaker is approx. 70 mm.

Downloads
327
Likes
15
Rating
0
P
PrintablesCraig D

Moai Salt Shaker

This is a salt shaker made by remixing the Thingiverse "Moai - High Quality Mesh" (https://www.thingiverse.com/thing:3179781). Two versions, just cosmetically different: "carved", a rougher carved or chiseled look and "smooth". Carved is…

Downloads
324
Likes
46
Rating
5
P
PrintablesMakersHelpCare

Princess Salt Shaker

This is a fun little salt shaker in the shape of a wand a fairy or princess would use. Spice up your dinner for your kids or friends with this magic little salt shaker. It prints flat and looks even cooler with a textured plate. I used a…

Downloads
320
Likes
75
Rating
5
P
PrintablesWonderballz

DF64 Stronger Blind Shaker Stand for MHW-3Bomber Blind Shaker

My MHW-3Bomber Blind Shaker had a little larger of an outer radius, so I just remixed this to fit my blind shaker. Bonus is that when it's grinding, the vibration on my machine causes the blind shaker to spin, so the grinds end up nicely…

Downloads
306
Likes
17
Rating
5
P
PrintablesSchichtschmiede

Just Spices shaker insert

Just Spices shaker insert! This is my version of a Just-Spices insert with different hole sizes. The first one has 2mm and 3mm holes and the other one has 5mm and 8mm holes. My recommended settings: Filament: PLA Layer height: 0.2 Walls:…

Downloads
297
Likes
47
Rating
5
P
PrintablesSimo

df54 blind shaker mount 58mm + 54mm (MHW-3Bomber)

printed in pla-cf Orca slicer about 1hr print time 0.2 layer hight 2 walls 4 top & bottom shells 20% infill gyroid

Downloads
292
Likes
15
Rating
5
P
PrintablesAdam L

Scoop, Shake, and Store: A Versatile 3D Printed Ice Melt Shaker

Whether you need to melt ice on your driveway, feed your plants, or print an impromptu storage-thing-with-handle, this 3D printed salt shaker can do it all! This design consists of three parts: a scoop, a shaker body, and a cap. The body…

Downloads
291
Likes
48
Rating
0
P
PrintablesGoto Dengo

Mini spice shaker, small salt shaker

Instead of the lower screw cap, a funnel can be screwed on for easier filling. Print with PET-G. Best to have clear filament for the container and an identifying color for the top cap: White for salt, red for chili, black for pepper, etc.…

Downloads
282
Likes
38
Rating
4.8
P
PrintablesWilliam

Vallejo Paint Shaker

The paint-Shaker can be attached to a multi-tool or a jigsaw. it fits Vallejo 17ml bottles, Parts are held together by two M3x10. Just put the multi-tool blade between the two parts and tighten it together using M3 bolts and nuts. There…

Downloads
281
Likes
69
Rating
3.8
P
PrintablesMKS

LEGO Salt & Pepper Shakers

Printing this should take approximately 4 hours, and it's strongly recommended to use supports. The shakers are designed with a convenient TOOL part that allows you to refill them easily by opening the bottom hatch. I've ensured that salt…

Downloads
281
Likes
59
Rating
5
P
PrintablesC B

Moai Salt & Pepper Shaker+Tray

This is a Salt & Pepper Shaker in the form of a “ MOAI ” with a Tray You can print without support !!! Printer : Flsun V400 Walls 3 ; top 4 ; bottom 4 layer height : 0,1 line width : 0,6 – Shaker layer height : 0,07 line width : 0,4 –…

Downloads
278
Likes
56
Rating
5
P
Printablesomnifarious905

Soul Shaker Miniature

Journeys Through the Radiant Citadel model 2/10 This was probably the easiest one of the lot. I already have a base mesh which I used for humanoid creatures in not only this set of miniatures, but ones I've previously done. So ripping off…

Downloads
277
Likes
23
Rating
5
P
PrintablesFunbie Studios

Paint Bottle Shaker Attachment

This is a hobby paint bottle holder which can be attached to a David 400 linear sander to allow it to be used as a paint shaker/mixer. Probably would also benefit from having some ball bearings in the hobby paint dropper bottle as an…

Downloads
277
Likes
49
Rating
4
P
PrintablesRobertCowanDIY

Automatic Spray Paint Shaker

These models are for converting a drill-powered spray paint shaker (link below) into an automated solution. Just add a motor, delay relay module and some wire and you have your own paint shaker that can be fully automatic and hands-off.…

Downloads
277
Likes
108
Rating
5
P
Printablesmnitschke

DF64 - Blind Shaker Mount

Mount for holding the weber workshop's blind shaker on the DF64 Category: Kitchen & Dining

Downloads
276
Likes
28
Rating
5
P
PrintablesAndyG68

Paint Shaker 19,1mm Massage Gun > Citadel...

The original is only for vallejo vials and a massage gun with a small receptacle. My gun has a 19.1 mm receptacle. I have adapted the holder and created the upper part for 4 different paint pots. Now Citadel small and large, AK and…

Downloads
276
Likes
23
Rating
5
P
PrintablesPigna94

Cocktail Shaker

Print with Petg The only part printed with supports is the shaker cap, the rest without supports Print Settings Rafts No Supports No Resolution 0.20mm Infill 30% Filament PETG

Downloads
272
Likes
23
Rating
2
P
PrintablesAkshay

Open Source Laboratory Rocker / Mixer / Shaker (Lab Rocker)

Here is my take on the laboratory rocker, which is a laboratory tool/device used in laboratories for mild to moderately aggressive biological and molecular mixing applications. Please, note that no model herein should be used for…

Downloads
270
Likes
151
Rating
5
P
Printablessui77

Tiny Salt Shaker

btw. this is my new filament first print test object :)

Downloads
268
Likes
26
Rating
4.83
P
PrintablesTanyaAkinora

Salt and pepper shaker

Use the necessary things in your kitchen or make an original gift. I recommend printing PLA plastic. I made my model with a color change during printing. But you can use for example white and black for salt and pepper, respectively.

Downloads
266
Likes
42
Rating
5
P
PrintablesPatrik

Salz und Pfeffer streuer Salt and pepper shaker

0.15 layer height no supports prusa mini

Downloads
265
Likes
23
Rating
5
P
PrintablesNemLukacs

Salt Shaker Queen

Salt Shaker Also use for storing pepper, sugar or any kind of spice Rotatable dispenser with 3 different feed amount Detachable screw lid for convinient refill Easy to print (3 components) For better appearance use the aligned seam…

Downloads
265
Likes
62
Rating
4.25
P
PrintablesDanBnk

Vallejo Dropper Bottle Shaker

Vallejo Dropper Bottle Shaker. Adaptor for use with Orthomechanik Massage Gun. Clip fits for Vallejo Dropper Bottles and should fit other brands too. You will need supports for printing.

Downloads
265
Likes
31
Rating
5
P
Printableswhoppingpochard

Low-cost plate shaker

We needed an inexpensive and compact plate shaker for our anaerobic chamber. The Crickit Lab Shaker, remixed by DotScott1, was the perfect inspiration! I modified the original Crickit project to use the same inexpensive electronics as…

Downloads
257
Likes
93
Rating
4.67
P
PrintablesMZ4250

Soul Shaker

My take on the Soul Shaker is unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.

Downloads
250
Likes
37
Rating
0
P
Printableskaraths

Salt shaker

portable salt shaker

Downloads
250
Likes
30
Rating
4
P
PrintablesBradley Hammond

Blind Shaker Mount For DF64

This is a mount designed to hold a Weber Workshops blind shaker for the DF64 Gen 1 and 2 coffee grinder. It has a slot for a small magnet in the base that centers the shaker directly below the grounds chute. In the photos of mine, I made…

Downloads
246
Likes
14
Rating
0
P
PrintablesBencham95

Original Shaker Siphon Pump (Drop in glass marble while printing)

I wanted a siphon pump whilst out adventure riding, i made this one that works with a glass marble dropped in whilst printing. Get some vinyl tubing put it on and it should work for you! Can take a second to get the technique. Made from…

Downloads
245
Likes
37
Rating
0
P
Printablesgabe

Salt and Pepper Shaker

I was looking for relatively large holes allowing the salt to flow easily. I also wanted a salt shaker that could be filled from the top. Then I added a pepper shaker to match. I printed them on PLA with 0.15 mm height. They print without…

Downloads
243
Likes
32
Rating
5
P
PrintablesGreg Sparrow

Spray Paint Can Shaker / Mixer for Reciprocating Saw

Allows the spray paint can to be magnetically attached to the sabre saw blade. This is a remix - changed mounting to 3mm screws, can clamp and bottom lock.

Downloads
242
Likes
35
Rating
5
P
PrintablesSzojka

Twist Lock Mason Jar Spice Shaker Lid

Presenting the Twist Lock Mason Jar Lid, specially designed for the Alternative Jar Lids Contest . This innovative lid embodies a unique twist-to-lock mechanism and, when unlocked, uncovers an array of holes, transforming your mason jar…

Downloads
239
Likes
55
Rating
4.8
P
PrintablesLeithian9

True Fruits Spice Shaker

Convert your True Fuits Bottles into spice shakers! Fits 250ml and Ingwer Shot bottles by TrueFruits. Print with 5 top/bottom layers and 3 walls for 100% infill equivalent (with 0,4mm nozzle) This design is based on…

Downloads
238
Likes
36
Rating
4.83
P
PrintablesProelio

DF64 (Gen 2) Blind Shaker Mount (MHW-3Bomber)

Shaker mount for MHW-3Bomber Blind Shaker, fitting the DF64 (Gen 2). Fits the lid as well just under it.

Downloads
232
Likes
16
Rating
5
P
PrintablesTec

Shaker cap / Víčko shakeru

I have lost cap for my shaker. Unfortunately, it has quite unique thread that is not continuous, but separated into four parts. It has inner diameter 36 mm. I enclose also editable file for Fusion 360, if anyone will need to modify the…

Downloads
226
Likes
15
Rating
0
P
Printablesxxblyxx

Fanatec CSL Pedal Bass Shaker Dayton Audio TT25

These mounts allow the Dayton Audio TT25 transducer (bass shakers) to be mounted to the Fanatec CSL pedals. There is a separate model for the accelerator and brake pedal. The mount is secured to the TT25 via M3x15 bolts and then the…

Downloads
224
Likes
28
Rating
5
P
PrintablesWolfgangLederer

Paint Shaker for electric tooth brush

The models fit on an Oral B electric tooth brush. It can be used to shake model paints in dropper bottles. Citadel Valejo Wash If combined with an agitator ball it mixes the color quite well. It is a rather thight fit, you can either…

Downloads
223
Likes
43
Rating
0
P
PrintablesFrank G. Busch

Replacement lid for Tupperware Shaker

The original lid is broken, but the shaker is still fine? Print yourself a new lid. I recommend using TPU, I printed this lid with Bambu TPU for AMS with a shore hardness of 68D and it works fine: noozle 0.6mm 0,18 mm layer 3 wall loops…

Downloads
220
Likes
15
Rating
4.25
P
PrintablesLumamannen

Vallejo bottle shaker. Bright massage gun.

Support needed. I used 50% infill in the fitting, and 25 on the rest.

Downloads
219
Likes
41
Rating
5
P
Printablesdav88

baby groot salt & pepper shaker

this uses a screw plug to plug the shaker. Category: Kitchen & Dining

Downloads
214
Likes
25
Rating
4.5
P
Printablesbrandorf

Longer Reciprocating Saw Vallejo Paint Shaker

Like Face_Rollan, I needed a longer shaker, because the shoe isn't removable on my saw, Unlike Face_Rollan, I use Vallejo paints. Print Settings Printer Brand: Monoprice Printer: Maker Ultimate Rafts: No Supports: Yes Resolution: 0.16…

Downloads
207
Likes
23
Rating
5
P
PrintablesPrismaPrints

Simple Salt and Pepper Shaker

A very simple salt or pepper shaker. Print in whatever you want, just make the ring a different colour (ideally). Tolerances very wide, no calibration or supports needed.

Downloads
203
Likes
23
Rating
5
P
Printablesparcel75

Mechanical Salt and Pepper Shaker - Stand with Napkin Holder

Thank you so much for the 'Mechanical Salt and Pepper Shaker' from @ArgiCZ . It has been adorning our dining table for quite some time now and is almost in daily use. I’ve also added a napkin holder for small napkins, approximately 10 x…

Downloads
196
Likes
39
Rating
5
P
PrintableseCrowne

BST-1 Bass Shaker Metal Mount for Aluminum Profile / SimRacing

Head over to the discord server if you want to discuss this model, or other sim racing DIY stuff https://discord.gg/aK2JKpwT4m ================ This is a metal mount to directly bolt the Dayton BST-1 Bass shakers to 20XX (20mm, commonly…

Downloads
194
Likes
22
Rating
0
P
PrintablesBuildComics

Shaker Ball Half Spheres With Thread for juggling/music

Originally designed by Guido van Hout, slightly remodelled with coarser threads and chamfered inside/outside to reduce overhang and seam size. Prints in 0.2mm but nicer in 0.15mm. Female side needs to have a brim otherwise your chamfered…

Downloads
192
Likes
17
Rating
0
P
PrintablesGael Lafond

Salt shaker v2 (OpenSCAD)

This is a new version of my salt shaker, made with OpenSCAD. The cap is screwable on this one. For version 1, see: https://www.thingiverse.com/thing:2187749 The idea was to use the linear_extrude module with the twist parameter to create…

Downloads
190
Likes
24
Rating
5