Stopfen für Shishakopf
Der Stopfen verhindert, dass Tabak in das Phunnelloch fällt, und so die Möbel beschmutzt werden.
- Downloads
- 48
- Likes
- 5
- Rating
- 0
124 models
Der Stopfen verhindert, dass Tabak in das Phunnelloch fällt, und so die Möbel beschmutzt werden.
I designed a base to build a hookah out of a Jack Daniels 0.7l bottle. I've tried and smoked with it and it works just fine. So if you are not able to bring a whole hookah or want a little one for yourself this is the right thing for you.…
clip on is 21mm, but also you can use a cable tie for a more secure fit. (cable tie is 2 x 140mm) hose holder hole is 20mm - If you enjoy my 3D models and want to support my work, feel free to donate via PayPal . Every contribution helps…
Throw away hygiene mouthpiece for shisha hoses.
Print as it is. I have printed it in 0.1 and worked just fine. After printing put this little pin inside and glue it up. There will be a lot of strings but you can handle it. update v2 higher spikes
This rack fits 8 bowls, whether phunnel or other types of bowls. Printed on a 30x30 cm print bed.
Do you need new shisha moutpeace and like anime Overlord then this is something for you.
boquilla para cachimba / shisha de puntada
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Just print out both parts. Due to the modeled thread you can connect the two parts. If needed use a little rubber to get everything sealed. Put on a hose, and a tobacco bowl with coconut coal on top of it and start smoking. Be aware to…
Nozzle hammer The images are of a different version, currently it is wider and shorter
A normal Hokkah mouthpiece. Already printed and Tested it. Be aware to print with a suitable filament. If you are printing it with PLA be aware that it can dent in hot summer days under the sun. Have fun :)
Hier ist ein kleines "Regal" um 4 Köpfe aufzuhängen und auszustellen.
GoT Drogon head shisha mouth tip Print Settings Supports: Yes Resolution: 0.15mm Infill: 15% Post-Printing ============= You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in…
This will make your hookah more quiet. Story: https://www.tiktok.com/@thomaskekeisen/video/6831482091813784838
hookah shisha coal box for 26mm coal cubes. handle is a 18/8 mount to hold the head during preparation.
All you need is a PET bottle, a bowl and a hose.
The project is not yet complete, but feedback is welcome. THE STL IS ONLY PREVIEW, PLEASE USE THE STEP FILES To assemble the hookah, refer to the product image. Everything needs to be printed once - Some parts come in different sizes…
i glued the pieces together. The ball needs to be loose between the upper and under piece.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Boquilla para cachimba con forma del Pokemon "Koffing". Koffing expulsa humo por sus orificios. El .stl tiene incluido un anillo para colgarte la boquilla en un lanyard. Altura de capa: 0.2 Relleno: 15% Número contornos: 3
Hookah house holder pipe holder
Wallmount for 4x Shisha Hose with 16mm diameter. Printed in PLA.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Maße Tischplatte: 18,35mm Shischa schlauch: 14,40mm dick Gewinde Metrisches ISO: M10x1.5 H6 /R
Dieser Sishadichtring hat folgende Maße: Höhe: ca. 2,5 cm Innendurchmesser unten: ca. 1,9 cm Außendurchmesser unten: ca. 2,8 cm Innendurchmesser oben: ca. 1,4 cm Außendurchmesser oben: ca. 1,8 cm am besten mit TPU drucken. (Fülldichte ca.…
engish verion below Ich habe einen Diffusor für meine Amy-Shisha gesucht (Durchmesser des Tauchrohres: 20mm) aber nur Silikonüberzüge gefunden und aus diesem Grund selbst einen designt. Das Design möchte ich mit euch teilen. Ich habe es…
- Quality: 0.2 - Infill: 20% - Support - Speed: 60
A simple shisha/hookah phunnel plug, designed for an Oblako L , but can be used for any phunnel. Version 1: Normal → Single plug version. Version 2: Plug with integrated "tobacco needle" for shredding and refining. The models in the…
Smoke in rhythm Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example,…
Yoda head as shisha mouth tip Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in fact it's just a piece of the classic hookah hose, so…
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Jar Jar Binks shisha mouth tip Print Settings Supports: Yes Post-Printing You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in fact it's just a piece of the classic hookah hose,…
Drak nasaditelný místo ventilu. Po profouknutí chrlí kouř. Použil jsem to konkrétně pro Sahara smoke - Nemesis, kde jsem musel dokoupit druhý adaptér s kuličkou do srdce dýmky. Jinak by to nefungovalo jak má. Dragon can be used instead of…
Dimensions Inner diameter: 20mm Outer diameter: 25mm Hole diameter: 3.5mm Print Settings Printer: Creation Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.1 - 0.2 Infill: 10 - 20% Post-Printing coming soon. Category: Replacement…
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
quality: 0.2 Infill:5% Not support speed: 60
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Good luck printing it :) Category: Gadgets
Shisha mouth tip nahcek Category: Sport & Outdoors
While Cleaining the Water pipe of my Shisha Broke and it still had a thread inside the base and i could not get it out so i designed one on my Own
Easy to use holder for your hose. Just slide it onto your table, fit in your hookah hose and enjoy smoking your hookah while having both hands free. This model was made for my desk and your desk may have different width and/or your hose…
Joker shisha mouth tip Print Settings Supports: Yes Resolution: 0.15mm Infill: 15% Post-Printing intended use intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for…
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Here I have created a shisha mouthpiece stand in which you can place up to four mouthpieces.
Professor Farnsworth shisha mouthtip
Verhindert das hineinfallen vom Tabak beim Kopfbau
Smoke the wisdom. Print Settings Rafts: Doesn't Matter Supports: Yes Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example,…
This plate holds upt to 9 funnels. 5funnels will be pin Supported. I recommend a 0.6nozzle and 0.3 lh
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Ersatz bzw. Adapter für den Anschluss zur Shisha. Passt bei Little Dragon Shisha. Am besten bei 101,5% Größe Drucken.
Shisha Schlauch Zu macher. Damit kein Staub mehr in die Schläuche gelangen kann.
A hookah adapter, that you can use to make your Hookah quickbowl compatible. you Just have look if your hookah has the same screw mechanism, and buy 2 rubber seals.
Adapter Molassefänger M16x1.25 zu 3° Konus (Schliff 18,8) Adapter Mollasses catcher M16x1.25 to 3° taper (18.8 cut)
GoT Night king shisha mouth tip Post-Printing intended use intended use You can use it like this but with printed mouth tip is more elegant (you need one more part, for example, this in fact it's just a piece of the classic hookah hose,…
Replacement for a Shisha Waterpipe works fine with the Shisha Base i Designed/ print at 95% Scale
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
BASE SUPPORT FOR HOOKAH, WITH A HOLE TO INSERT LEDS LIGHT AND ILLUMINATE THE BASE OF THE HOOKAH
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
quality: 2.0 speed:60 No rafth with supports
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
A stand that mounts easily and seamlessly onto your hookah. It is designed to hold 4 of your hookah tools. It comes in 2 pieces, the actual hanger, and a ring. Both pieces have places inside for 8 magnets each to be inserted. this way…
Eine einfache Halterung um den Shisha-Schlauch an seinem Platz zu halten. Öffnungen für 2 Mündstücke (20mm und 30mm). Einfach den Kohleteller abschrauben, den Halter darunter und wieder daraufschrauben. Fertig :) Print Settings Printer…
- Quality: 0.2 - Infill: 20% - Support - Speed: 60
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Transportables und kleines Mundstück zum Shisharauchen. Optimal um es mit in die Shisha-Bar zu nehmen. Am besten aus PETG drucken.
Sorgt für festen Sitz und Stabilität während der Fahrt. Die Emotion Roam wird mit einem XKAH Pro genutzt. Die Halterung fixiert nur die Shisha selbst. Für den sicheren und festen halt des Hitzemanagement, auf der Shisha, muss gesorgt…
Custom replacement for resin part on Mr Shisha Rocket 2.0
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
Es handelt sich bei diesem Modell um ein Ersatzteil für die Base einer Amy Deluxe Shisha. Das Teil ist bei mir aufgrund von Abreibungen nicht mehr optimal nutzbar gewesen, weshalb ich einen Ersatz gedruckt habe. This model is a…
Verlängerung bzw. Adapter für Shisha-Schläuche Zwei Schläuche können einfach verlängert werden.
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
This composite spring from 1,75 mm filament is great for preventing your shisha pipe from bending near the attachment. In the photos I cut the filament pieces to 13 cm and used a drop of superglue to attach it into the printed parts. I…
Boquilla para ser usada en una Shisha. Con modelo para la goma: imprimir en TPU o flexible.
The original duct is meant to connect to Noctua, but I wanted to connect it to my fan. I designed two clips. And made sure the duct didn't cover the switch. I aimed for a model that was 25mm thick. Printing the duct takes time, so I…
Hier können so ziemlich alle Dinge gelagert werden
Hier ein Shisha Diffuser für ein Rohrdurchmesser von 16mm. Gedruckt mit PLAHier ein Shisha Diffuser für ein Rohrdurchmesser von 16mm. Gedruckt mit PLA
A simple hookah hose holder designed to keep your hose secure and off the ground. The requires no tools and attaches directly to the stem. Compact, stable, and easy to print. Main hole: 16mm, mouthpiece hole: 13mm
Kleine Hilfe zum Phunel Kopfbau damit kein Tabak in den Phunel fällt
Naústek na vodní dýmku s motivem One Piece- Shisha mouthpiece
A holder suitable for e.g. Seat Cupra drink holder for two e-shishas
Das ist eine Halterung Für eure Shisha Köpfe die ihr dann zum Beispiel an die Wand hängen könnt!
Einfach die Aufnahme (Wird 6x benötigt) in den Ständer drücken, Köpfe drauf und fertig.
Kein Support erforderlich. Viel Spaß beim Drucken. :)
Here I have created a shisha mouthpiece stand in which you can place up to eight mouthpieces.
Riser for the shishabucks cloud micro, so that you can put a cover or grill over the hose port and around your bowl. Print from PETG or better ASA. There is a rim on the top, so that the cover/grill can not fall off. The rim should fit…
Ich habe es mit meinem Alten Creality Ender 3 v1 gedruckt. Es braucht keine Supports und sollte mit einer Geringen Füllung gedruckt werden.
Put Magnets in while printing.. No need to Stop the print. This Box is suitable for these forks (~1€ a piece): Aliexpress Shisha Forks The Magnets i used (5 x 1mm) : [Amazon Neodym 100 pieces Ø5mm] (…
Shisha Gewinde-Adapter M12x1 auf M16x1 Ein praktischer Adapter, um ältere Shishas mit M12x1 Gewinde bei den Schlauchanschlüssen auf den neueren M16x1 Standard umzurüsten. Damit können auch moderne Schläuche und Adapter an einer älteren…
Just a simple base to drop the vape pen and keep it vertical. Scaled to 102% on X and Y could be used as cap with enough friction to not get loose in transport. Brand El Shisha, product line Diamond.
Mit diesem speziell entwickelten Shisha Siebhalter kannst du deine Shisha Siebe ordentlich und sicher aufbewahren. Kein lästiges Suchen oder unordentliches Stapeln mehr – dieser Halter sorgt dafür, dass deine Siebe stets griffbereit und…
This hookah hose holder is designed for 4 hoses including connectors.