Search results: siding

Sort order

125 models

P
PrintablesJason

Arlo wired video doorbell vinyl siding mount bracket

I was looking for a commercial made vinyl siding bracket to mount an Arlo wired video doorbell but could not find one. So I made one. I’m including a step file for anyone that wants to mod this, should make it easier. I used 4 perimeters…

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
82
Likes
10
Rating
0
P
PrintablesAdam L

Vinyl Siding Mounting Blocks : Put stuff on your house!

Update on 2/10/2023: I added a different “Rastered” set that has only one registration ledge to accommodate people who may have situations where they cannot use the bottom ledge in the original design. These 3 new designs are the same…

Downloads
686
Likes
66
Rating
5
P
PrintablesSunoo

Ring Doorbell Siding Mount

Adapter for the original Ring Video Doorbell and 2020 rerelease to allow it to mount nicely against 4" siding. I couldn't find anything that fit my needs, so I made these. They should print with no supports if you print it with the bottom…

Downloads
565
Likes
46
Rating
5
P
Printablessdbarker

Ubiquiti Unifi G4 Doorbell Pro Siding Flush Mount

Siding flush mount for the Ubiquiti Unifi G4 Doorbell Pro. V1 is the original model that works/worked with the G4 Doorbell Pro when it was first released. V2 is for the later changes to mounting pattern / holes that works with the newer…

Downloads
472
Likes
34
Rating
3
P
Printableskermur

Vinyl Siding Tool

I came home last night to find a few sections of my vinyl siding had separated from their neighboring runs of siding. I hopped up an a ladder and quickly realized that I would need some type of tool to pull open the plastic lip on one…

Downloads
417
Likes
27
Rating
5
P
Printablesbuck lake

Siding Nailer Adapter

Turns your Metabo coil roofing nailer into a siding nailer.

Downloads
416
Likes
15
Rating
5
P
Printablestpellegrini

Vinyl Siding Mounting Block

My new Ubiquiti G4 Doorbell Pro was significantly larger than the older model it replaced so a new mounting plate was required. I wanted a simple mounting plate that allowed me to locate the doorbell optimally. My house has vinyl siding…

Downloads
364
Likes
26
Rating
0
P
PrintablesSpeakinTelnet

Reolink doorbell 4" siding adapter

Due to the included adapter being only flat I've created a siding adaptor made for standard 4" vinyl siding. It keeps the sideway angle of that included spacer. There are two models included depending if you want to install the doorbell…

Downloads
354
Likes
21
Rating
5
P
PrintablesHumanshield

Starlink Internet Cable Clips for Vinyl Siding

This is a Cable clip designed to hold the Starlink Dishy Mcflatface cable to vinyl siding, no tools or drilling required. These simply slide up and snap into place just like the vinyl pieces attach to each other. They could of course be…

Downloads
328
Likes
28
Rating
5
P
PrintablesCapitaine Bob

HO scale Wood siding truck bed

Compatible with almost HO scale truck. Use a .2 mm nozzle

Downloads
303
Likes
45
Rating
0
P
PrintablesLCSteve

Vinyl siding Mount

I made this to be able to mount some lighting and a camera on the front of my house. I have vinyl siding and needed a 'filler' to make it look flush. I designed this but have not found the time to print it and test it out. I still wanted…

Downloads
301
Likes
36
Rating
4.5
P
PrintablesSteveJohnsen

Lincoln Logs Roof Supports - 84 Variations! - Different Siding, Sizes and Roof Styles - Design Improvements

UPDATE 2023-12-06: There was a slight measurement error in the base notch spacing of many of the originally uploaded models. I replaced them all with corrected files. If you downloaded and printed the old designs, they will still work,…

Downloads
294
Likes
72
Rating
0
P
Printablestmx1911

Blink Camera Dutch Lap Siding mount

Blink camera mount for Dutch lap siding (Menards)

Downloads
241
Likes
32
Rating
0
P
PrintablesTadTadd

Ubiquiti G4 Doorbell Pro Wedge Mount for Siding

This mounting bracket is designed to be a form fit for both the aluminum siding as well as the black metal back plate of the G4 doorbell. It is a right-hand mount, but is designed to be mirrorable in PrusaSlicer to get a left-hand mount.…

Downloads
233
Likes
30
Rating
5
P
Printablesscorf

Reolink RLC-811A Camera Mount for 5" Dutchlap Vinyl Siding

This model is a Reolink RLC-811A Camera Mount for 5" Dutchlap Vinyl Siding. It will print with no supports. I needed a sturdy mount for outdoor use so I printed with 4 perimeters and 4 top and bottom layers out of ASA. Mounting hardware:…

Downloads
213
Likes
28
Rating
0
P
Printablesmenerso

Wyze Doorbell Pro Vinyl Siding Mount

There is a “wedge” version which has a 5% downward angle of the mount so that you can see packages closer to the wall. The non-wedge version does not include the 5% downward angle. You can download the model or edit the model directly in…

Downloads
207
Likes
13
Rating
0
P
Printableswagenfratz

Blink Mount - Vinyl Siding

Mount for a Blink security camera for vinyl siding. Modeled after the clips I use for Christmas lights so I don't have to nail or screw things into the house. They are removable so you can change the location of cameras easily. I ordered…

Downloads
204
Likes
22
Rating
4.67
P
PrintablesAquaMorph

Ubiquiti UniFi G4 Doorbell Pro Vinyl Siding Mount

The is designed to work with the Ubiquiti UniFi G4 Doorbell Pro and use the mount included in the box. The vinyl siding of my house will make it so the doorbell is at and angle so this corrects that. I included the FreeCAD model in case…

Downloads
198
Likes
13
Rating
0
P
PrintablesPrintfessor

Outdoor Light Support Mount for Corrugated Metal Siding

This model forms a solid base that will allow you to mount lights on a specific pattern of corrugated metal siding. See the pictures in order to understand how this is used to hold the light and the pattern of metal siding that it will…

Downloads
192
Likes
12
Rating
0
P
PrintablesTrobaparati

Unifi G4 Doorbell Pro Dutchlap Siding Adapter Plate

Dutchlap Siding Adapter Plate for the Unifi G4 Doorbell Pro

Downloads
189
Likes
17
Rating
0
P
PrintablesRavi

Vinyl Siding Clip with Keyhole

Clip that can be used to hang lights, frames, etc. on Vinyl Siding without screws. Just push the clip through the joint between two sidings. Removal is easy, and just requires to pull the clip towards you, and as long as there is downward…

Downloads
182
Likes
19
Rating
5
P
PrintablesDave Bain

Customizable Exterior Mounting Plate for Vinyl Siding

Customizable mounting plate for vinyl siding. Refer to DimKey image. First two values PeakToPeak and Section depth refer to siding. Remaining values are used to create the plate. The cutout can either be round or rectangular and is…

Downloads
168
Likes
13
Rating
0
P
PrintablesMatty774

TP-Link Tapo D225 Doorbell Mount for 4.5" Vinyl Siding

I designed this to mount the doorbell to the front of my house which has 4.5" vinyl siding. I didn't need any extra screws; just used the hardware that came with the kit! Printed on an MK4S in PETG: Printed on its side with organic…

Downloads
165
Likes
8
Rating
0
P
PrintablesHerculez3D

Vinyl Siding Hook for extension cords

No more damaged Extension cords! No more "good Neighbours" damaging your expensive extension cords with snow blowers! Prolong the line of your cords from damage of the elements! Just pop under a seam on your siding and friction does the…

Downloads
164
Likes
29
Rating
0
P
PrintablesAnthersV

UPDATED: Unifi G4 Doorbell Pro POE Parametric Edge Mount (angled + siding slant)

Parametric model for mounting the Unifi G4 Doorbell Pro POE at odd angles, on either the left or right side of the door. Intended to be used with the metal backplate that comes included with the doorbell. The POE version comes with angled…

Downloads
162
Likes
14
Rating
0
P
Printablestater

4.5 inch dutch lap siding

i haven't found a 4.5 inch dutch lap siding yet and spent awhile designing this one actually kind of very proud of it just find where u need a hole for attachment purposes aka light ,dryer vent, camera and cut out as necessary i printed…

Downloads
160
Likes
5
Rating
0
P
PrintablesJanet

Google Nest Doorbell 2nd Gen Wired Doorbell Mount for Siding

I need an angled spacer so that this would fit on my house's siding.

Downloads
150
Likes
7
Rating
0
P
PrintablesEscarjoe

Nest Hello Doorbell Mount for 4" Dutch Lap Siding

Version 1 (red print in photos) I created based on a similar design I found, but I made mine based on the type of siding I have, dutch lap. I printed it with a 4mm nozzle and 20% infill out of PLA. The plate is 3/8" thick. The triangle…

Downloads
144
Likes
8
Rating
0
P
Printablesrjtwin

Ring Camera Doorbell Mobile Home Trailer Siding Mounting Kit

This is an easy to print mounting kit for a Ring Doorbell. Works with Ring Doorbell models 1 and 2. I designed the mount myself to custom fit my siding on my mobile home. The angled mounts and rain cover are altered versions (original…

Downloads
133
Likes
17
Rating
4.5
P
Printablesgrahampheath

Wyze Cam Pan V3 Vinyl Siding Mount Remixed

This inserts in between vinyl siding connections to mount your Wyze Pan Cam v3. Assumes you still have the original right angle mount. Let me know if you attach it to a print, I'd love to know about it! If you would like a 90deg rotation,…

Downloads
131
Likes
16
Rating
0
P
PrintablesMike

Angled Spacer for Siding Mount to be used with Basic Wired Ring Doorbell

These are two angled spacers to be used to mount a basic 2021 wired Ring doorbell to cedar or vinyl siding. One of the spacers will have the doorbell facing straight out from the face of the siding and the other is angled 15 degrees to…

Downloads
124
Likes
10
Rating
5
P
PrintablesRoo

Ring 2 Doorbell Angled Vinyl Siding Mount

Bought a Ring 2 Doorbell recently but none of the mounts worked well for me. I have both vinyl siding and I wanted to hardwire to the existing doorbell wiring so I designed this up. My siding is of the 4" slat variety, very common here.…

Downloads
117
Likes
8
Rating
0
P
PrintablesLCSteve

Vinyl Siding Light Fixture Adapter

My home needed a more robust method of mounting my front door light fixtures to it's vinyl siding. Previous owners would change lights and drill new holes to the point where things were pretty bad and I could no longer get a snug…

Downloads
114
Likes
20
Rating
0
P
Printablesbuchhla

Vinyl siding christmas/holiday light clip

clips to hang holiday lights on vinyl siding. Print Settings Printer Brand: Creality Printer: K1 Rafts: No Supports: No Resolution: .2 Infill: 100 Filament: Inland Tough PLA White Category: Outdoor & Garden

Downloads
109
Likes
15
Rating
0
P
Printablesmenerso

Wyze Doorbell Vinyl Siding Mount

Update: Added a wall plate with NO channel for wires. My house I and the doorbell wired come out below where I wanted. The updated one just has the hole in the middle of the plate. Update: Added a V2 for the plug. I thickened up the…

Downloads
103
Likes
20
Rating
0
P
Printablesoriddlero

Vinyl Siding Hanger Clip / Mount for Outdoor Decorations & WallArt

I finally got around to putting new vinyl siding on my garage and could not bring myself to make holes in it with screws so I whipped these up so i could re-hang my garage decorations. They have a surprisingly good grip & are super-simple…

Downloads
99
Likes
10
Rating
0
P
PrintablesBCameron

Reolink Doorbell Battery/POE/Wifi 4.5" Dutch Lap Siding Mounts

Reolink Doorbell 4.5" Dutch Lap Siding Mounts These mounts fit on 4 ½" Dutch Lap vinyl siding and provide a mounting surface for Reolink's video doorbells. Two versions: POE/Wifi and Battery. You can mount the angle mounting bracket onto…

Downloads
97
Likes
2
Rating
0
P
PrintablesMike Thomas

Vinyl Siding Hook For Lighting

Was having a hard time hanging outdoor lighting from the vinyl siding so I made a hook to help me and everyone else out. This hook just pushes in to the siding trim and has notches to holds it in place. Print Settings Printer: CR-10 S4…

Downloads
95
Likes
21
Rating
5
P
PrintablesMAKelly2

Vinyl Siding Mount

Use this adaptor to create a flat surface on vinyl siding.

Downloads
94
Likes
7
Rating
0

Nest Doorbell (Battery) Siding Mount

After creating my angle mount for the Nest Doorbell (Battery), I got requests to make a design for a siding mount. I don't have siding myself so this design is untested. It is designed to fit siding with a 4" face and 1" depth. Print face…

Downloads
94
Likes
4
Rating
0
P
PrintablesTriano

Christmas Lights Siding Clip

Simple clip to mount Christmas lights on siding

Downloads
91
Likes
14
Rating
0
P
PrintablesKinematic

Unifi Doorbell Lite parametric siding adapter

This is dimensionally accurate for the Doorbell Lite outline, screw holes, and ethernet pass through. Adjust parametric model to fit your siding. The model and step file shown here are for the common siding size 4" x 1/2". So if you have…

Downloads
89
Likes
6
Rating
0
P
Printableskms15

Ring Gen 2 Wired Doorbell mount for siding

This model provides a bracket for mounting a Ring Gen 2 Wired doorbell on siding with the common 1/2" step every 4" of height. The model fits between the siding and the bracket the comes with the doorbell, allowing the doorbell to remain…

Downloads
85
Likes
2
Rating
0
P
Printablesmenerso

Wyze OG Vinyl Siding Mount

Slides in between the horizontal vinyl siding connections via friction fit. Easy to move. Easy to remove. I printed at 1.0 layer height to give the posts the best chance of not breaking. I added a Support Enforcer just over the posts I…

Downloads
80
Likes
16
Rating
5
P
Printablesmgerlach310

Updated - Unifi G4 Doorbell Pro - Ubiquiti Siding Mount

Updated (April 2026): I have updated the file as I cleaned it up and made some slight modifications (thichness, wire opening). V1 and V2 are the same width and heigh but the back is slightly different to try to stay flush to my siding.…

Downloads
79
Likes
2
Rating
0
P
PrintablesFaboricus

Ubiquiti-compatible corrugated metal siding mount for U7 Outdoor and U7 Pro Outdoor Wireless Access Points (WAPs)

Allows the Ubiquiti U7 Outdoor (U7-Outdoor) and U7 Pro Outdoor (U7-Pro-Outdoor) to be mounted on corrugated metal siding, specifically with a 2-2/3" spread and a 7/8" rise (see photo). This mount is compatible with both the Ubiquiti U7…

Downloads
74
Likes
4
Rating
0
P
PrintablesAdam Milligan

4" Vinyl Siding mount for Ubiquiti Doorbell Lite

Printed with PETG for outdoor use, with 0.12 layers and no supports. Could still use some improvements, slots are a bit long but it worked for what I needed.

Downloads
74
Likes
5
Rating
0
P
PrintablesOmar Alkhadra

Google Nest 2nd Gen Battery Doorbell Vinyl Siding Adapter

Needed a vinyl siding adapter to be able to attach the google nest 2nd gen battery doorbell to the side of the house. The only one i found on here was for the wired version only. This adapter is for the battery version (Which can also be…

Downloads
71
Likes
10
Rating
0
P
PrintablesFoden

Wyze Cam v3 Siding Mount

For the Wyze v3 Remix of sjguppy and https://www.thingiverse.com/thing:4838456 The siding 'teeth' may come off if your siding is tight and or old. They may need to be beefed up - see v2/v3 Even with a siding removal tool I can't get them…

Downloads
70
Likes
2
Rating
0
P
Printablesjgentry

Arlo Video Doorbell Siding Bracket

The wires for my doorbell came out of the wall right at the bottom of one of the 7" peak-to-peak siding sheets. The Arlo Video Doorbell wants to be mounted right where the wires come out and, thus, I had a problem getting the doorbell…

Downloads
70
Likes
7
Rating
0
P
PrintablesBluegradient

Google Nest doorbell siding mount

print on bottom with no supports. no enclosure needed.

Downloads
68
Likes
3
Rating
0
P
PrintableswithanHdammit

Cat6 siding clip

I'm running some Cat6 outside for a camera, but I have fiber-cement siding (commonly known as HardiPlank) and couldn't staple the network wire. I noticed the siding planks had small gaps where they overlap, and upon further inspection,…

Downloads
67
Likes
11
Rating
0
P
PrintablesGayPN

4" Vinyl Siding Corner Bracket for Ubiquiti G4/G5 Cameras (Threaded Insert)

4" Siding Mount for 2 Ubiquiti G4 Bullet or G5 Pro Cameras and others that use the same mount. Big thanks to user PHOENlX for providing mount on Thingiverse. https://www.thingiverse.com/thing:4930947 Print Settings Printer Brand: Prusa…

Downloads
66
Likes
19
Rating
0
P
Printablesmenerso

Nest Doorbell Vinyl Siding Mount

I made this mount originally for a Ring Doorbell, but I recently replaced the Ring with Nest's new doorbell to keep all my cameras consistent. That being said, I had to make a new mount for the doorbell. This is it. This mount has a…

Downloads
62
Likes
8
Rating
0
P
PrintablesDave Long

TP-Link Kasa KD110 Siding Adapter

This adapter works with the TP-Link Kasa KD110 doorbell on standard 4" double siding.

Downloads
61
Likes
5
Rating
0
P
PrintablesColen Casey

siding mount

gives you a FLAT place to mount whatever you need to mount on stepped siding

Downloads
61
Likes
5
Rating
0
P
PrintablesMaker Bit

Ring Doorbell Pro Siding Adapter – Fits 4" Vinyl (No Wedge Needed)

Tired of your Ring doorbell sitting crooked on vinyl siding? This mount is designed specifically for 4" vinyl siding to give your Ring Doorbell Pro a clean, flush, professional install —no awkward gaps, wedges, or shims. 🔧 What it solves…

Downloads
60
Likes
0
Rating
0

Ring 4 Camera Doorbell Siding Mount

I created a Ring 4 camera mount for my Ring doorbell after mounting it haphazardly to my siding. This ended up warping it slightly and just not allowing for a nice clean install. We also had issues with debris and whatever else ending up…

Downloads
60
Likes
10
Rating
0
P
Printablesjbuszkie

WYZE Doorbell V2 siding adapter

My old doorbell was mounted on my siding. The new WYZE video doorbell would have been mounted angled down without an adapter. So I whipped one up. This one has two sets of holes. One for the new doorbell plate and one to mount the adapter…

Downloads
58
Likes
3
Rating
0
P
PrintablesImmaterial

Blink Doorbell mount for 4" vinyl siding + J channel

Prints with supports. I printed in petg and so far it has been holding up well. I did not need to screw into the siding or use adhesive though that would be more secure. I used 3mm screws and tapped the holes, but there are recesses for…

Downloads
58
Likes
3
Rating
0
P
PrintablesBilliam

Amcrest AD410 doorbell angled mount for 4.5" vinyl siding

Fits unknown-brand 4.5" vinyl siding. Two parts are available: One uses two rectangular pins for alignment and requires gluing. The other is a single unit, but requires supports. Update Made pins symmetrical, so angle can be reversed

Downloads
58
Likes
6
Rating
5
P
Printablesjmynheir

Reolink Doorbell Camera 3 & 6 Degree leveling spacers for siding

3 degree and 6 degree spacers for Reolink doorbell camera, corrects the level of camera when mounted on older clapboard siding. Blender file included. Category: Household

Downloads
57
Likes
7
Rating
0
P
PrintablesFlyBy Tom

Arlo Doorbell Wedge for Siding

Wedge for the Arlo Doorbell to accommodate siding. Fits under that stock Arlo mount perfectly and has passthrough that matches stock for wiring and screws. The angle of the wedge is 5 degrees which is .5 degrees off level which was…

Downloads
55
Likes
4
Rating
5
P
Printablesrtarbutton

Ubiquiti Unfi G5 Bullet Camera 4 inch siding mount

The original model wasn't the right size or had the holes for the brass inserts I needed so I remade the same idea from scratch. You will need some 6mm deep M4 inserts. These will work with the provided M4 screws that come with the…

Downloads
53
Likes
11
Rating
0
P
PrintablesAurle Gagne

Camera Mount for 5" Dutchlap Vinyl Siding

Removed the opening per request of someone who needed the file w/o the opening. Thanks @scorf for sharing the step file.

Downloads
52
Likes
6
Rating
0
P
PrintablesTom_Designs

Wyze Doorbell Mount for Vinyl Siding

Print out of PETG. The ring fits over the stock mount to hide the gap. Should fit over it fairly tight. Adjust accordingly.

Downloads
50
Likes
7
Rating
0
P
Printablessharpshout

Reolink Battery Doorbell Siding mount.

This is a an adapter to allow a REOLINK 2K Battery Video Doorbell to mount to siding. In my case it's staggered Hardy Board, but it will work for any siding with a 12mm thickness and a ~7 degree angle…

Downloads
50
Likes
0
Rating
0
P
Printablesbommerts

Siding Mount - for lights etc

Use this to install a light or other fixture mounted flat on your siding. Updated to include mounting holes - to siding & for lamp. Moved electrical inlet up for my application.

Downloads
48
Likes
3
Rating
0

Vinyl Siding J Channel Mounting Bracket

This is a bracket to mount an outdoor thermometer or other small item without drilling holes. The bracket slides onto vinyl J channel and has a hole for a #5 or #6 screw. Versions for both screw sizes are included as well as the native…

Downloads
47
Likes
10
Rating
5
P
PrintablesTadTadd

Ubiquiti Smart Floodlight Backplate for Siding

The Ubiquiti Smart Floodlight comes with two backplates, one that holds the light parallel to the wall and the other that tips the light down at an angle. It is the latter angled bracket that is most useful (in my opinion) since you can…

Downloads
46
Likes
15
Rating
0
P
Printablesprintmeister

Siding Cap

The two stand-offs are meant to have adhesive applied and slide into the gaps of a specific type of siding material. Printed in PETG. Mirror if needed.

Downloads
46
Likes
5
Rating
0
P
PrintablesSurrealAqua

Filament shelf brackets for metal shelf siding

This is just a bracket that I designed that hooks onto my shelves to create shelves for the filament that I have on hand. These brackets require 3/8" dowels. The length of the dowels depend on the size of the thickness of your shelves.…

Downloads
44
Likes
10
Rating
0
P
PrintablesJrichTX

Arlo Video Doorbell Wood Siding Mount

*** This design has been imported from Thingiverse. My original design is here: https://www.thingiverse.com/thing:4640094 I created this design to mount an Arlo Video Doorbell to our home's cedar siding with a clean look. Without this,…

Downloads
42
Likes
2
Rating
0
P
PrintablesSean Todd

PVC Siding Cable Clip

This clip easily snaps into PVC siding joint allowing you to route cables horizontally when there is no other way to hide them.

Downloads
39
Likes
5
Rating
0
P
Printablesmarkwal

Ubiquiti U6-Mesh Siding Mount

This is designed to match up with the U6-Mesh's included mount and go between the mount and the 8.5 degrees sloped siding.

Downloads
39
Likes
5
Rating
0
P
Printablesplasti-squirt

Ring Video Doorbell adapter for lap siding

A simple wedge adapter to install your Ring Video doorbell at a proper angle on lap siding. Now with 3 and 5 degree versions. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: .1 Infill: 100 Filament:…

Downloads
38
Likes
6
Rating
0
P
PrintablesIronicMango

Reolink Doorbell Vinyl Siding Spacer

Spacer to fit Reolink POE Doorbell to Siding I installed a Reolink POE doorbell, but my doorbell was located on vinyl siding such that the doorbell can't fit flush to the mounting surface. Functionally, that works fine, but it looks ugly.…

Downloads
35
Likes
6
Rating
0
P
PrintablesMatamata

Nest Hello Mount for Siding

This is a quick remix of the tilted mount for the Nest Hello. This design over-corrects for the angle of the siding so there is a slight downward tilt. I was able to use the original screws. Added a 20deg version per request. I doubt the…

Downloads
35
Likes
6
Rating
0
P
Printablesnullgel

Wyze Cam Vinyl Siding Corner Clip

If you happen to have outdoor vinyl siding with inside corner trim like mine, this thing will easily clip your Wyze Cam to it. Just slide the camera base into it and then clip it onto the trim. I was able to tuck the cable under the rest…

Downloads
34
Likes
10
Rating
0
P
PrintablesMatthew Wegmann

Vinyl Siding Hook

Small hook that slides between Vinyl Siding to allow for hanging lightweight objects. PLA 0.20 Layer height 2 perimeters 15% Gyroid infill

Downloads
33
Likes
3
Rating
0
P
Printableszebulon

Aquor House Hydrant vinyl siding mount

Please print in PETG for thermal robustness. This was necessary for my home because the angle would not constitute good draining. You may need longer screws than are included with the install kit.

Downloads
32
Likes
2
Rating
0
P
Printablesgmaranda

Universal 4" Siding Camera Support – Easy-Install Bracket for Outdoor Cameras

The inside of the support has a hollow part to allow the wiring to be stored. It is a tight fit but it all gets inside which allows for a neat storing. You will have to adjust the screws you want to use depending on how you print this. I…

Downloads
29
Likes
4
Rating
0
P
Printablesrbihun

Ring Doorbell Siding Mount

Ring doorbell mount for old 2" wood siding. Print on flat face, no supports required. Not intended to replace the stock ring mount but rather add support for the original mount for 2" wood siding on older houses. Can be mounted with #8…

Downloads
28
Likes
4
Rating
0
P
Printableswindyriver

Siding

This is 3D printable and interlock-able siding. I printed this in PETG you can print with ABS or other outdoor materials that you prefer. I will upload a picture of the fully sided shed when it is finished in the spring.

Downloads
26
Likes
4
Rating
0
P

Screwless Reolink Doorbell Siding Mount

While renting a place with no doorbell wiring this worked well by using a tight fit with the vinyl and vinyl flashing.

Downloads
26
Likes
3
Rating
0
P
PrintablesJeyMco

GreenHouse storm proofing (adapter clips for rain pipe and siding)

For my lean-to greenhouse from Vente Unique, I created multiple adapters and add-ons for fitting a rain pipe. Printing notes: I printed the clips (white) in PLA and the rain pipe bits in grey PETG. PETG is more UV resistant and should…

Downloads
26
Likes
3
Rating
0
P
Printableswedgeworks

Home Siding Adapter plate for Allen & Roth Castine Bronze; Outdoor Wall Light

I learned a few things on this design. The biggest lesson what that despite how it looks, siding is not make a flat bends. From one “slat” to the next, there is a slight curve. That drove me nuts. The other is sometimes, you're just going…

Downloads
25
Likes
3
Rating
0
P
PrintablesMakerIke

6" Siding Cable Conduit

A track for Ethernet cable to run in that should clip under hardiplank siding. Will print soon. Edit: Tried printing the original version and the slight overhang of the ‘tab’ parts caused issues… and it was a bit skinny which made it hard…

Downloads
24
Likes
6
Rating
0
P
PrintablesC K

Nest Hello Gen1 Doorbell Siding Adapter

This is a remix of Escarjoe's model. The cut under the siding overhang was extended, and the overall shape trimmed to an oval to better fit the aluminum mount that comes with the doorbell.

Downloads
21
Likes
3
Rating
0
P
PrintablesTomB19

J-Block vinyl siding hydrant fitting

This is a J Block for an outdoor hose bib. It's the flat surface type, not the recessed variety commonly sold in hardware stores. I use a piece of 6 inch cellulose PVC as a backer (It's 140mm wide, cut to 150mm long). This looks far…

Downloads
20
Likes
4
Rating
0
P
PrintablesB&B TECH

Makita AN611 Siding Nailer Valve Sheet

Makita AN611 Siding Nailer Valve Sheet, print in TPU like material. 0.1mm layer height, all perimeters and i bet this will last longer than the cheap rubber ones as it was designed to be a little thicker in some parts. Category: Tools

Downloads
20
Likes
0
Rating
0
P
PrintablesShabubu

Unifi G4 Doorbell Pro Siding Adapter

I designed this for a very specific problem with doorbell wiring. We have angled siding, where our doorbell is located, and the egress point for the doorbell wiring is directly underneath one of the edges of the siding. This model is…

Downloads
18
Likes
4
Rating
0
P
PrintablesEryn Bottens

Ring Wired Mount for Shingle Siding

Mount for 5" shingle siding to use with Ring Wired camera.

Downloads
18
Likes
3
Rating
0
P
Printablesshad

Blink Outdoor 4 Vinyl Siding Mount ( No Drill Required )

Blink Outdoor 4 Vinyl Siding Mount (No Drill Required) This is a simple, easy-to-install mount for the Blink Outdoor 4 camera that securely attaches to standard vinyl siding—No drilling, screws, or permanent modifications required. The…

Downloads
17
Likes
5
Rating
0
P
PrintablesJohn T

Blink Doorbell 2K+ 5" Dutch Lap Vinyl Siding Adapter – Flush Mount

Blink Doorbell 2K+ 5" Dutch Lap Vinyl Siding Adapter This is a modified version of the Blink Doorbell 5-inch Dutch Lap Vinyl Siding Adapter (Normal Flush Mount) originally designed by Jamminator on Thingiverse . The original design was…

Downloads
17
Likes
1
Rating
0
P
PrintablesXypher2000

Nest Doorbell Battery Aftermarket Mount Scalloped Siding Block

I created this because I bought a Google Nest Doorbell battery with no mounting hardware for cheap on eBay and a 3rd party mounting hardware that still needed the original mounting hardware to work. It was too long and skinny for the…

Downloads
15
Likes
1
Rating
0
P
PrintablesJack Lowry

3.15 ubiquity vinyl siding corner mount

I used the GayPN's design as a guide to create a new model that fits my 3.15" vinyl siding corner. Like GayPN's design this is cut in half (you will need two of these) and uses M4 heat inserts for both the camera mount and to hold the…

Downloads
15
Likes
2
Rating
0
P
PrintablesMichaelDot

Nest Hello Siding Mount - Georgia Pacific Shadow Ridge 5"

A mount for the Nest Hello doorbell. This is specific to the siding we have. Georgia Pacific Shadow Ridge 5" How I Designed This Fusion 360 - here is the link to the files for your improvement. https://a360.co/2TfSwco I cut a thin strip…

Downloads
15
Likes
0
Rating
0
P
PrintablesFrankB

Hardiplank siding light hook

I needed a hook for light hanging that fit the short edge of our siding. The model fits 8mm or 5/16" hardiplank. Scale it if you have something a little different (thicker or thinner). These have only been out for a few weeks, but are…

Downloads
13
Likes
4
Rating
0
P
Printablesgmaranda

Universal 4" Vinyl Siding Camera Bracket for Solar-Powered Hiseeu Cameras

The camera metal support came with the screws which I used. You will need your own screws to install the composite support to the siding. I used ABS with 5 walls and 15% infill. I hope it helps you out.

Downloads
12
Likes
1
Rating
0