847 models
To assemble it you'll need 1 m3 by 20mm and 4 m3 by 30mm socket head screws, 1 self locking m3 nut and 2 normal or thin m3 nuts and 4 m4 by 6 set screws To adjust X axis turn the screw on the rear post To adjust Z axis position the yellow…
I recommend printing the knobs an the crosshair inlays in a different color than the body. You need 4 pcs. of M3x10mm socket head scews.
Attention Nerf enthusiasts! Are you looking to take your Nerf blaster game to the next level? Boost your accuracy and aim with the 3D Printable Sight/Optic for Nerf Blasters . This sleek and functional accessory is designed to help you…
Update 04.01.2024: I noticed a few mistakes, most importantly the screw size for the front tunnel, which is M3x12mm and not M3x10. I did some changes to the model because I noticed I was measuring the height at the wrong place. While I…
I printed the red dot sight that @ThompsonStudios made, but I felt like there were somethings that could be improved. My list of things that weren't quite the way I wanted is: The battery slot was not very good, and I wanted a slide in…
Simple, fast to print Lightweight front sight for Reximex RP (MITO). (original shroud removed to save weight). Customizable height with changeable inserts. Meant to be fastened by small headless screw M3 x 4. (probably any long enough M3…
This is a 3D printable trip odometer reset knob for Honda Insight
A sight mount with picatinny rail, that fits to the Novritsch ssp18 airsoft pistol. Material: PLA Nozzle (what I used, works well with others):0,6mm You don't need any other parts than the screw, that holds the stock sight in place. I put…
A puller tool used to remove the oil sight glass from the 42º or 90º gearbox on a Bell 205, UH-1, or 212 helicopter. The puller has two different size spacers (one thin, one thick) which may or may not need to be used depending on the…
!!!This is not a real gun!!! Hello, Today I have for you Airsoft AK 47, AK 74 front sight. It fits perfectly in its place. The appearance is authentic. Requires M3 bolt. Modeled after the Cyma AK 041 template and photos from the internet.…
Created a simple sight cover for Vector Optics magnifier. It should easily snap into a magnifier and protect your lens. I used pla with 0,2mm layer height.
I wanted an inexpensive optic for my Nerf Rival Kronos. The Daisy Electronic Red Dot Point Sight (https://www.amazon.com/gp/product/B000N8KHQG/) fits the bill, but the bracket doesn't fit on the Nerf Rival Kronos' rail. The model is…
A simple mount for the Daisy Electronic Point Sight. It does not feature the ability to zero the dot, but let's be honest, with a toy grade sight like this you're here for the emotional response of a reflex sight, not to actually use it…
This simple learning device is designed to help toddlers understand how parts fit together through hands-on exploration. By using different shapes and connections, children learn basic building concepts, spatial awareness, and…
The "Voronoi Beyond Sight" sculpture is an excellent piece for 3D printing enthusiasts looking to explore the intersection of art and technology. The model is designed with a Voronoi pattern, a natural pattern that resembles the random,…
This is a Sighting-in rifle rest that I made for my Savage Model 64 22LR caliber. The fore-stock sits in the yoke very nicely. The drawing PDF file has the assembly details. The feet I used in the pictures were re-used from an old clothes…
Holographic Sight-Like Nerf Scope, print in a standing direction
Peep sight rotation can be very annoying and time consuming to fix. One solution is to twist the bow string to perfectly align peep but it requires to have a bow press. One other, fast and easy solution is to use this little tool, that…
---------------------------------------------------------------------------------------- Description ---------------------------------------------------------------------------------------- A pair of nice and simple picatinny attached…
Stuck in quarantine, figured I would do something. Print instructions I recommend printing front down, with supports.
This is an electronic red dot sight for nerf and rival guns. it requires a small LED, a CR1632 battery, and a clear piece of plastic. I tried to keep a similar aesthetic to the original sight. I will post an assembly video soon. please…
I use a 20 mm M3 bolt to hold the rear sight in place. Mount on the picatinny with M4 30mm.
Remarkable geniuses have made our world what it is today. I would like to honour these people with aesthetic sculptures and remember them for their genius and contribution to humanity. With this first model you can have the brain of…
I made these sights for my airsoft replica of the G18C (but it should fit any picatinny rail) because I did not find any that I liked. It's easy to slide on the rail and it doesn't move after it's been installed. I'm using Planetler's…
The Eye of Insight Pendant is a bold statement piece that blends symbolism with modern design. Featuring a striking, all-seeing eye set within a sleek triangular frame, this pendant represents wisdom, awareness, and protection. Its deep…
Zeros to about 50m but Elev. and Windage is adjustable. Requires: 1x M2x~10mm 1x M3x~23mm + nut 2x M5x~25mm Not all picattiny is manufactured within the same tolerances thus sanding may be necessary.
Hardware: Kitchen rubber band, most will work, mine have a diameter of 35mm when laid out flat M4*25 bolt and nut, one per sight This is a set of iron sights that uses a tiny rubber band to work, the sights will snap into the lowered…
Remix of the toothpick gun.
Upload of my project from thingiverse since thingiverse has become trash! Preface Optic Fibre sight designed to friction fit onto a picatinny rail as I think it looks better without bolt holes to bolt it on. Should fit on most picatinny…
Signal Launcher Leaf Sight V2 by Qwerm A leaf sight designed for use with 37mm signal launchers. The sight can be either mounted on side or top picatinny rails. Due to various signaling rounds having different ranges, the sight is marked…
needs 3x m4*25 nuts and bolts to mount
This is a sight pusher for Glock Slides. This device will hold the slide in place and allow pushing the sights off a Glock Upper Slide. You will need the following hardware: 4x 5/16 Nuts 1x 5/16 3.75-4" Bolt 1x 5/16 1.25-1.5" Bolt…
remix of https://www.thingiverse.com/thing:4906938 made the holes bigger to accomodate 1.75mm filament, just slot it in, trim, and you're good to go! Hardware needed: M5*30bolt and nut, 1.75mm filament
This model is compatible with the lego system.
Picatinny rail sight riser 2 kinds of picatinny rail riser: holes riser and slots riser lenght: 45mm width:20,7mm height:43mm 2XM3 screws and nuts
As a mechanical engineer working in the biomedical field, I designed this simple Total Hip Replacement Model to educate and inspire those curious about the mechanics of orthopedic implants. This 3D-printable system showcases the…
Parametric Sports Sight for Hot Shoe Includes OpenSCAD source code Three different sight variants FreeCAD source file for one variant of the sight Print instructions Parametric Sports Sight for Hot Shoe Includes OpenSCAD source code Three…
Hello there! My fellow air rifle enthusiasts liked the idea of 3d printing sight risers and asked me to make models for Anschütz rifles too - and here they are! I didn't go all the way and created different heights - maybe I'll do that…
Sight to add some realism to yours or your children's nerf guns This does not include the use of a laser, only crosshairs I recommend that you file down the locking peg for the rail lightly until the sight can be added and removed easily.…
These are some remixed versions of the magnificent scope designed by Ernpao and inspired by the legendary Nerf Vortex scope. The main modification was the addition of a Picatinny mount, but when i used it for a while i had the strong urge…
Give them some attitude along with their seasoning.
The original project by Max Braun available here used the casing from an Apple iSight webcam, removing the internal parts and replacing them with Raspberry Pi hardware. The software used is no longer operable with the latest Raspberry Pi…
Simple sights for use in a airsoft GBB glock (Used a R17 Army Armament as reference). Use 1.5mm fiber, glue is optional.
Remix of Ruger Picatinny rail by RustyNail The cutout allows to use stock iron sights without detaching the rail I also made it about 0.8mm higher There seem to be no good orientaion for printing this on FDM printer. Best ones seem to be:…
Remixed XDr4g0nX thing to fit an RMR cutout
Introducing the Ducky Sights! Fully adjustable iron sights, with low hardware requirements. Perfect for high FPS foam dart blasters and maybe even airsoft. Compatible with both Picatinny and NATO Rails. Required Hardware 3x M4x30 DIN912…
This fills in the rear sight dovetail on Gen 5 MOS Glocks. I run full-size RDO on my full-size Glocks and I do not utilize a cowitness for competition shooting. I find the stock rear sight white box to be distracting in this…
Hey there! It's time to add another air rifle brand to my collection of sight risers! This time, it's all about Feinwerkbau air rifles. As with any of my sight risers, you will need M3 hex nuts as well as two M3x20 and one M3x16 socket…
Non-Printed Parts: - 4x M5x30 SHCS's - 4x M5 Nuts - 1x M3x40 SHCS - 1x M3x20 SHCS - 2x M3 Nuts - 1x AR-15 Buffer Detent Spring Front Sight Assembly: 1 - Install Front Sight Frame on rail with 2x M5 nuts and bolts 2 - Insert AR-15 buffer…
This is a tool to make vertical adjustments to a A2 style front iron sight. This is specifically designed for Springfield Armory flip up sights as shown in the original picture. This can be printed off of the base of the tool with zero…
A sight for the LabRadar to aid in aiming the unit at the target. Improves the ability to quickly aim the unit at the target. Requires a longer bolt to mount to the sight on the LabRadar.
I wanted a sighted RMR plate for my first P80 build so I remixed the first blank RMR that fit my Glock 19 V4 is the final and recommended version
Sight riser for any generic diopter. Works for air and small bore rifle.
This is a assortment of hicapa rear sights. The fibre optic is just a piece of 1,75 mm Prusament PETG ;) Feel free to comment, remix and especially to print. If you want to have the full fusion file I maybe upload it later. Happy Printing
This Wiimote lighgun version includes gun sights and a modified trigger to add a pen spring for improved trigger action. With the gun sights, you can turn off those pesky onscreen crosshairs; for games that support that feature. Cheers!…
Remarkable geniuses have made our world what it is today. I would like to honour these people with aesthetic sculptures and remember them for their genius and contribution to humanity. With this second model of the series you can have the…
Found that the original didn't fit on the Picatinny rail that I had. Remixed tolerances for rail and filament. You will need to scale the pin. I found 95% (not length) to still be tight Print Settings Rafts: No Supports: No Resolution:…
Update 250711: Made picatinny attachment area 0,1mm wider per side. 160mm length 50mm rising height attached with 2x M3x30mm cylindrical screws and nuts let me know if there are any issues.
I created this to use when I teach rifle and pistol classes. It's a nice way to help visualize correct sight picture and sight alignment when doing trainings. Easy to print. I use .24 layer height and 25% infill but you can adjust as you…
I remixed this from https://www.thingiverse.com/thing:3370145 because the printed threads wouldn't work for me. So instead of the printed locking mechanism, its now using 35mm M4 screw and an M4 nut.
This is a carry handle for the Game Face Trion. It clamps to the top rail and gives you... a carry handle. It also has iron sights integrated into it ands more rail for adding an optic if you want. It acts as a nice riser for an optic…
These are cool looking iron sights made to match your scifi-styled blasters! To attach these to your blaster, you will need 3x M4 Nut 3x M4x30mm Bolt Files are included in print orientation. Supports are needed for Rear Sight A under the…
Post a make if you print! I would love to see it. Picatinny sight mount dimensioned specifically for the Zinc 2.0 foam dart blaster by 118 Design, as all existing mount models were too small. Still easy to prime the blaster. Requires 1 or…
Replacement Piece For the True Innovations DPS 3D Insight Gaming Chair, This Connects The Rotating Lumbar Piece Under The Head Rest. You Will Need Hardware From The Existing Chair Since This Only Replaces The Rubber Arm. Installation…
After printing out another sight pusher I decided I wanted to make a version that was smaller and quicker to print with a captured pusher. I also wanted to use more common hardware and I wanted it to accommodate supressor height sights up…
Here is the file for my Elixir or Foresight, a Mystical Brew which may grant the drinker visions of what is to come. but just because you can see what is coming does not guarantee the ability to change it. would you still want to see? you…
Minimally usable “iron sights” to keep on a picatinny rail when the normal optics / sights are removed. The ghost ring and post is accurate enough for some plinking with a .22 or air rifle and stays in place with just friction. Light…
Notes I only have a WE MP5, so my dimentions may be slightly off for other brands but this should work on pretty much any MP5 including MP5SDs. I have had one make now confirming fitment on a MKE AP5 (Turkish MP5 clone). Hardware If you…
— MIGRATED FROM MY OLD THINGIVERSE ACCOUNT — So I really needed a pair of Iron sights for my gun, but the previous sights I made ( the folding sights at http://www.thingiverse.com/thing:603954 ) are really a pain in the ass to get to…
Summary UPDATE1-Rival Mounts DESCRIPTION New Optional mounting parts added to suit the Nerf Rival rail, parts simply replace the picatinny rail versions. Thanks to ehdrien for the suggestion, he also has shared rail adapters to mount…
Dart Zone Max Solo Picatinny Dart Holder and Sight
This is an upgraded front sight piece to accept a 1.75mm filament piece. If used with a bright clear/transparent colored 1.75mm filament, it works as a fiber optic front sight. Even a plain white filament is much higher contrast than the…
I beefed up the frame by using 5 perimeter walls and adding a second spot to hold the slide on both sides. The pusher was redesigned to fit suppressor height sights. I added a hole in the wrench so it stays captured to the tool and a…
I really liked the aesthetic of Logan398's sight and the simple functionality of Szeez's adjustability. I thought Logan398's idea of inserting pieces of 3D filament into the sight as “fibre optics” was a fun idea. Unfortunately I did drop…
2/8/2021: Update, I've added a fletching model for the arrows. This is a remix of the western style crossbow, with improved limbs, laser sight, bandolier, and bolt tips. A brace for the handle has also been added. You can find the source…
Want to try new front sight height? Choose one, print with highest quality (from ASA/ABS or similar heat resistant filament) and install on Your CZ. Before install use fine sandpaper to smooth out top of the post. I've tested it and it…
wojak pointing gun sights
for the supports I suggest raft and touching build plate for the support settings and standard quality -0.2mm and layer Hight 0.2.
In addition to the adapter you need x2 M3 short brass inserts to be installed underneath so that you can use the original screws of the TM Micro Red Pro Sight to secure the red dot to the adapter (needless to say you need to remove the…
Print flat on their rear ( as pictured ) and support the openings. Use 5 vertical shells ( assuming 0.4 nozzle ) to ensure that the rail interface is solid and slightly flexible. PLA+ is recommended for general durability. Front sight…
Each mount takes a body and a clamp. Print with the teardrop holes pointing tail up. Update V4: added a crease in the middle to align parts to center and prevent bowing
This model does not work and is currently not in development. I made this some time ago, because i wanted make my own cheap red dot sight. https://www.tinkercad.com/things/jTnmEr25lEZ-airsoft-reflex-sighteotech-512-prot TLDR: bad idea If…
Magpul AR front sight tool, tested to fit Magpul sights, does not fit fixed A2 front sights
i used a m3 heat insert into the fake adjustment wheel to tighten the rear sight. source https://cults3d.com/en/3d-model/tool/ar15-m4-m16-a1-detachable-handle
This model is compatible with the lego system.
Introducing the Adriondack fixed iron sights! These sights are not intended to be precise pointing devices, but can still provide a decent picture on foam dart blasters. This kit prints without supports. This kit includes a front sight…
A big open ring, don't need super accuracy on a foam blaster. I used TronskiFPV's Picatinny attachment part. It's very tight, might need filed or sanded down, but fits nice and snug from friction and you don't need to screw around with a…
Replacement front sight for the Little Badger .22LR
Print, slide on, aim, shoot
Low Poly Beyond Sight - Sculpture Very nice piece of art in low poly style. Place it to your living space or in your office as eye catcher. You need to print it with supports ;-) Take a look to my models, there you can find two similar…
English This is my first prototype of a protection for generic holographic sights to use in airsoft. I have designed this to reduce the amount of polycarbonate needed to cover the scope glass to be as inconspicuous as possible without…
Replacement Front sight for AR-7 pack rifle. This may need sanding to create a snug fit, it is oversized on purpose. I will be making different style sights in the future. Print Solid
Update (11/25/18): Added threads for the outer barrel to screw into. Replacement front sight for Galaxy/Tokyo Marui/CYMA MP5k Will NOT fit standard MP5 Plan on making a removable sight indicator for this part if it happens to get shot…
I loved the design of Rchatburn found here https://www.thingiverse.com/thing:3578752 but I also love how some of the stock rear sight have those ball dot sights that match the front sight. I decided to do a remix and ad my own take on the…
Here is a set of iron sights I designed for use on nerf blasters. The sights are staggered so the front sight is shorter causing shots to arc. fully adjustable rear sight for windage and elevation. top of rail to center of peep hole is…
Original author's part with a sight adjustment hole added to the motor part. Please reference the original part for all build instructions and related fastener hardware required.
I’m now on Patreon! If you'd like to support future projects or legally sell physical prints of my models, consider joining my Patreon. https://www.patreon.com/cw/MILITECH This is a dummy model, approximately the size of a €1 coin. It is…
I created this model for Conquest: The Last Argument of Kings but it would work on any wargame that requires you to draw a 45 degree line from a model with a square base (Warhammer The Old World?). Makes figuring out line of sight much…
After looking around my old LEGO bricks I found a broken antenna that when held up to the light looked a lot like fiber optics. This gave me the idea to use some LEGO antenna bricks as makeshift fiber optics for the sights on my WE G17…
