Search results: sights

Sort order

177 models

P
PrintablesSzeez

Picatinny folding iron sights

To assemble it you'll need 1 m3 by 20mm and 4 m3 by 30mm socket head screws, 1 self locking m3 nut and 2 normal or thin m3 nuts and 4 m4 by 6 set screws To adjust X axis turn the screw on the rear post To adjust Z axis position the yellow…

Downloads
1,525
Likes
290
Rating
4.7
P
PrintablesSillybutts

Printable Worker Seagull Iron Sights - Picatinny Iron Sights

---------------------------------------------------------------------------------------- Description ---------------------------------------------------------------------------------------- A pair of nice and simple picatinny attached…

Downloads
1,406
Likes
266
Rating
4.88
P
PrintablesMarvin Bauer

Insights into a Genius: Albert Einstein

Remarkable geniuses have made our world what it is today. I would like to honour these people with aesthetic sculptures and remember them for their genius and contribution to humanity. With this first model you can have the brain of…

Downloads
916
Likes
469
Rating
4.91
P
PrintablesMars1307

Picatinny fixed sights

I made these sights for my airsoft replica of the G18C (but it should fit any picatinny rail) because I did not find any that I liked. It's easy to slide on the rail and it doesn't move after it's been installed. I'm using Planetler's…

Downloads
862
Likes
97
Rating
4.33
P
PrintablesLeedle Dynamics

Low Hardware Flipup Iron Sights

Hardware: Kitchen rubber band, most will work, mine have a diameter of 35mm when laid out flat M4*25 bolt and nut, one per sight This is a set of iron sights that uses a tiny rubber band to work, the sights will snap into the lowered…

Downloads
786
Likes
202
Rating
4.67
P
PrintablesSpurdo Spärde

Toothpick Gun / Pistol with sights

Remix of the toothpick gun.

Downloads
774
Likes
31
Rating
2.5
P
PrintablesLeedle Dynamics

Picatinny rail riser (with peep sights)

needs 3x m4*25 nuts and bolts to mount

Downloads
676
Likes
125
Rating
5
P
Printables79th Jedi

Fibre optic (filament) Picatinny Iron Sights

remix of https://www.thingiverse.com/thing:4906938 made the holes bigger to accomodate 1.75mm filament, just slot it in, trim, and you're good to go! Hardware needed: M5*30bolt and nut, 1.75mm filament

Downloads
631
Likes
98
Rating
5
P
PrintablesDirtyDovaDesign

Orthopedic Insights: Total Hip Replacement Model

As a mechanical engineer working in the biomedical field, I designed this simple Total Hip Replacement Model to educate and inspire those curious about the mechanics of orthopedic implants. This 3D-printable system showcases the…

Downloads
548
Likes
20
Rating
5
P
PrintablespDrugos

Airsoft Glock Optic fiber sights

Simple sights for use in a airsoft GBB glock (Used a R17 Army Armament as reference). Use 1.5mm fiber, glue is optional.

Downloads
455
Likes
61
Rating
0
P
PrintablesJurotom

Picatinny rail with sights cutout for Ruger 10/22

Remix of Ruger Picatinny rail by RustyNail The cutout allows to use stock iron sights without detaching the rail I also made it about 0.8mm higher There seem to be no good orientaion for printing this on FDM printer. Best ones seem to be:…

Downloads
447
Likes
58
Rating
0
P
Printablesfryeguy

Glock RMR LEGO "Fiber Optic" sights

Remixed XDr4g0nX thing to fit an RMR cutout

Downloads
441
Likes
65
Rating
0
P

Ducky Iron Sights

Introducing the Ducky Sights! Fully adjustable iron sights, with low hardware requirements. Perfect for high FPS foam dart blasters and maybe even airsoft. Compatible with both Picatinny and NATO Rails. Required Hardware 3x M4x30 DIN912…

Downloads
439
Likes
119
Rating
5
P
PrintablesKN16

Killer Sights

Non-Printed Parts: - 4x M5x30 SHCS's - 4x M5 Nuts - 1x M3x40 SHCS - 1x M3x20 SHCS - 2x M3 Nuts - 1x AR-15 Buffer Detent Spring Front Sight Assembly: 1 - Install Front Sight Frame on rail with 2x M5 nuts and bolts 2 - Insert AR-15 buffer…

Downloads
412
Likes
78
Rating
0
P
PrintablesSomeDingus

Picatinny Iron Sights Remix

Found that the original didn't fit on the Picatinny rail that I had. Remixed tolerances for rail and filament. You will need to scale the pin. I found 95% (not length) to still be tight Print Settings Rafts: No Supports: No Resolution:…

Downloads
383
Likes
36
Rating
5
P
PrintablesMmg1design

Wii Remote Light Gun With Pistol Sights And Trigger Spring

This Wiimote lighgun version includes gun sights and a modified trigger to add a pen spring for improved trigger action. With the gun sights, you can turn off those pesky onscreen crosshairs; for games that support that feature. Cheers!…

Downloads
383
Likes
81
Rating
3
P
PrintablesMarvin Bauer

Insights into a Genius: Nikola Tesla

Remarkable geniuses have made our world what it is today. I would like to honour these people with aesthetic sculptures and remember them for their genius and contribution to humanity. With this second model of the series you can have the…

Downloads
383
Likes
261
Rating
5
P
PrintablesStig

Middlefinger Ironsights

I remixed this from https://www.thingiverse.com/thing:3370145 because the printed threads wouldn't work for me. So instead of the printed locking mechanism, its now using 35mm M4 screw and an M4 nut.

Downloads
363
Likes
19
Rating
5
P
Printablesblasterface

GF Trion Carry Handle with Sights

This is a carry handle for the Game Face Trion. It clamps to the top rail and gives you... a carry handle. It also has iron sights integrated into it ands more rail for adding an optic if you want. It acts as a nice riser for an optic…

Downloads
357
Likes
64
Rating
3
P
Printableslavendork

Sci-fi Faux Scope Iron Sights for Nerf/Airsoft

These are cool looking iron sights made to match your scifi-styled blasters! To attach these to your blaster, you will need 3x M4 Nut 3x M4x30mm Bolt Files are included in print orientation. Supports are needed for Rear Sight A under the…

Downloads
357
Likes
124
Rating
5
P
PrintablesMeuon

Ghost ring / peep iron sights for air rifle or 22

Minimally usable “iron sights” to keep on a picatinny rail when the normal optics / sights are removed. The ghost ring and post is accurate enough for some plinking with a .22 or air rifle and stays in place with just friction. Light…

Downloads
331
Likes
30
Rating
5
P
PrintablesSimsesLab

3D Printable Fixed Iron Sights

— MIGRATED FROM MY OLD THINGIVERSE ACCOUNT — So I really needed a pair of Iron sights for my gun, but the previous sights I made ( the folding sights at http://www.thingiverse.com/thing:603954 ) are really a pain in the ass to get to…

Downloads
328
Likes
15
Rating
0
P
PrintablesNixqy

Glock Sight Pusher - Suppressor Height Sights

I beefed up the frame by using 5 perimeter walls and adding a second spot to hold the slide on both sides. The pusher was redesigned to fit suppressor height sights. I added a hole in the wrench so it stays captured to the tool and a…

Downloads
309
Likes
58
Rating
4.5

Adjustable "fibre optic" style filament picatinny iron sights

I really liked the aesthetic of Logan398's sight and the simple functionality of Szeez's adjustability. I thought Logan398's idea of inserting pieces of 3D filament into the sight as “fibre optics” was a fun idea. Unfortunately I did drop…

Downloads
296
Likes
48
Rating
5

Wojak Sights

wojak pointing gun sights

Downloads
283
Likes
64
Rating
5
P
PrintablesPoseidonDesign

Airsoft PDW Sights

Print flat on their rear ( as pictured ) and support the openings. Use 5 vertical shells ( assuming 0.4 nozzle ) to ensure that the rail interface is solid and slightly flexible. PLA+ is recommended for general durability. Front sight…

Downloads
277
Likes
48
Rating
5
P
PrintablesMidwest Designs

Picatinny Sights + Gopro Mount

Each mount takes a body and a clamp. Print with the teardrop holes pointing tail up. Update V4: added a crease in the middle to align parts to center and prevent bowing

Downloads
276
Likes
27
Rating
0
P
Printables404

'Adirondack' Blaster Fixed Iron Sights

Introducing the Adriondack fixed iron sights! These sights are not intended to be precise pointing devices, but can still provide a decent picture on foam dart blasters. This kit prints without supports. This kit includes a front sight…

Downloads
253
Likes
50
Rating
4.86
P
PrintablesInsomnia

Nerf Large Open Ring Sights for Picatinny

A big open ring, don't need super accuracy on a foam blaster. I used TronskiFPV's Picatinny attachment part. It's very tight, might need filed or sanded down, but fits nice and snug from friction and you don't need to screw around with a…

Downloads
247
Likes
41
Rating
4.5
P
Printablesradicalreel

Iron sights Nerf Elite 2.0 Trio

Print, slide on, aim, shoot

Downloads
243
Likes
23
Rating
5
P
PrintablesThomas j Frosch

Nerf Blaster Iron Sights

Here is a set of iron sights I designed for use on nerf blasters. The sights are staggered so the front sight is shorter causing shots to arc. fully adjustable rear sight for windage and elevation. top of rail to center of peep hole is…

Downloads
230
Likes
69
Rating
5

WE G17 "Fiber Optic" Sights

After looking around my old LEGO bricks I found a broken antenna that when held up to the light looked a lot like fiber optics. This gave me the idea to use some LEGO antenna bricks as makeshift fiber optics for the sights on my WE G17…

Downloads
227
Likes
37
Rating
0
P
PrintablesDryfiredude

Doodoo Dope Adjustable sights

So @Ex-Pigeons posted a really nice set of sights that look a lot like a pair that are commercially available, but they weren't adjustable. I had used the AWCY? Driplyft from EWW and Tdkin3d and knew that I could merge the two ideas to…

Downloads
226
Likes
21
Rating
5
P
Printablesdogs_on_mars

Simple Sights [No hardware!]

I've seen a lot of simple iron sights posted but none really fit the look that I wanted so I made these. Parts are oriented correctly for printing without supports, and require no hardware to install! I recommend printing with 3 walls for…

Downloads
218
Likes
27
Rating
5
P
PrintablesKptnAutismus

Iron sights for nerf blasters with picatinny rails

These are available in 1, 1.5 and 2 degree pitch options. i recommend trying 2 degrees for 70-100fps, 1.5 degrees for 100-150, 1 degree for anything above that. a 30mm raiser is included for blasters with a very flat top like the nexus…

Downloads
212
Likes
33
Rating
5
P
PrintablesCrabLeg

Picatinny rail flip-up iron sights

Hardware required: M4x25 screw and nut (for each part of the iron sights) Rubber band 1mm thick wire (for attaching the bubberband to the iron sights and the iron sights to the "base", see images) The images should show clearly how to…

Downloads
203
Likes
29
Rating
1
P
PrintablesCorvus

Iron Sights -- ONTOS Blaster -- Hardware Free -- Picatinny Rail

Iron Sights -- ONTOS hardware free for the Picatinny rail Adapted my one piece iron sights so that the shape fits better to the ONTOS (original) optic rail. The files are already pre-oriented. It needs approx. 20g of filament. My print…

Downloads
197
Likes
30
Rating
5
P
PrintablesIShootFoam

MW2 M4a1 picatinny sights

you can friction fit these Iron sights on any picatinny rail. THESE DO NOY WORK WITH NERF OR WEAVER RAILS** no hard wear required. Print Settings Rafts: Yes Supports: Yes Resolution: 200 Infill: 25 Filament: PolyMaker PLA any Category:…

Downloads
193
Likes
28
Rating
0

Reverse Ladder Picatinny Sights

These sights are designed to be used with large projectile firing blasters like Nerf Mega or Mega XL, for example i mainly use them with my Wildstyle. The name derives from the holes on the front sight that make the ladder unlike normal…

Downloads
186
Likes
32
Rating
4.25
P
PrintablesDąbal

Picatnny Iron Sights Open Sites

0.15 layer infil 30-50% 4 x m5 x30 mm 4x m5 nuts 1x m3 40 mm and nuts 1x m3 12-16 mm If you like my project you can buy me a coffee. Thanks https://buycoffee.to/dabal

Downloads
186
Likes
29
Rating
0
P
PrintablesHajo Piltz

Cooler WiiMote Gun rear sights

This is a 7mm wide ring that you can slide over the back of the gun with installed WiiMote. It's a tight fit but it works with rigid material such as PLA or PETG. I made it because my WiiMote would lift very slightly when pulling the…

Downloads
186
Likes
10
Rating
5
P
PrintablesCorvus

Iron Sights ** X-Shot Excel Ejector Shell Blaster ** Hardware Free ** Picatinny Rail

Iron Sights -- X-Shot Excel Ejector Shell Blaster Hardware free. Picatinny rail mounted. I adapted my one piece iron sights bar so that the shape and length fits the rail of the X-Shot Ejector. Other X-Shot Ejector Shell Blaster stuff:…

Downloads
174
Likes
33
Rating
5
P
PrintablesLeedle Dynamics

Yeethammer Sights

Pretty much a cosmetic piece, considering the yeethammer is a shotgun, but it does serve as iron sights if you have sniper shells.

Downloads
152
Likes
55
Rating
5

SLAB fixed ironsights

Intruduction These ironsights are remixed from the ones included with the files of the SLAB so the sight picture should be identical, if you don't count that the front sight is much further away than it would be on the rail. These were…

Downloads
148
Likes
32
Rating
5
P
PrintablesTarz

Holsters for Glock 19 G3 and G4 with or without TLR-6 and Suppressor Height Sights

NOTE: 09/21/2025 G3 and G4 holsters for suppressor height front sights up to 10mm added. This is a pair of open bottoms TPU holsters for the Gen 3 and Gen 4 Glock 19. It will fit pistols both with and without a TLR6 tactical light. It…

Downloads
146
Likes
11
Rating
0
P
PrintablesManta Design

Xshot AEB Motorized Piston Pump MPP Improved Sights

Update 7/31/25: Added hybrid variation of the rear sight Update 7/30/25: Added V2 and V3 of the rear sight. Front sight is slightly lowered to account for dart drop and longer range of pro blasters. Models are print oriented. Cut 6mm…

Downloads
144
Likes
48
Rating
5
P
PrintablesStagebox

M3 Adapted Ducky Iron Sights Variant

I liked the height, the design and the adjustability and just didn't have the right screws at hand. So I adjusted the model for the M3s that I had. Because those didn't fixate the sights in the notches of the rail due to the smaller…

Downloads
144
Likes
47
Rating
5
P
Printables43D PRINT

Iron sights for Airsoft Grenade Launcher

Iron sights for Airsoft Grenade Launcher ironsights for my grenade launcher mount without screws (just put it on rail) inside holes put filament Print settings 0,2mm layer 4walls no supports

Downloads
143
Likes
31
Rating
0
P
PrintablesSillyFluff-Arf

Hardware Free Fibre Optic Sights

I needed to use a small hammer to “gently guide” the pin into the hole after I printed it, but I think that's just my kinda bad printer tolerances. Just comment if it's a problem for you guys and I (might) fix it. You know, if anybody…

Downloads
142
Likes
27
Rating
5
P
Printableslucas32

Picatinny Iron Sights

Print with original settings Put 1.75mm filament in the holes to look like fiber optic

Downloads
131
Likes
25
Rating
5
P
Printablesformblasted

GF Trion Carry Handle - Remix for M3 Screws without sights

Just a simple remix from the great Carry Handle that @blasterface_841953 made. I removed the integrated sights and changed the screws into M3x10mm and M3x6mm Heat Inserts.

Downloads
129
Likes
17
Rating
5
P
PrintablesCorvus

Iron Sights Color Inserts __ Easy Aim __ X-Shot MPP __ Xshot Motorized Piston Pump

Iron Sights Color Inserts __ Easy To Aim + Clearly Visible __ X-Shot MPP The line of sight is parallel to the barrel. Rectangular rear and front sights at same height for easy and quick aiming like classic open sights. It is best to print…

Downloads
127
Likes
38
Rating
0

Nerf Ultra two sights

This is a remix from: https://www.thingiverse.com/thing:2018780 That sight was way too long for my Nerf Ultra 2. It is shortened so that it fits between the iron sight and the rail. All features in the rail are removed, it is stuck on…

Downloads
126
Likes
19
Rating
5
P
PrintablesFidde_

Sights for finger gun

Wanted to make something goofy for a competition and remembered that both me and my girlfriend needed sights for our finger guns. Really fast and simple to print, the ring part is 16mm ID and has an open slot so it can stretch a bit to…

Downloads
121
Likes
25
Rating
5
P
Printablesgnatcage

Iron Sights for Sillybutts Excalibur

Designed for a Sillybutts' Excalibur built using Out of Darts hardware kit (12" barrel, K31 spring). Each sight uses a single M3x25 socket head cap screw, to be driven directly into plastic (no tap or heat-set insert required, but be…

Downloads
116
Likes
38
Rating
4.75
P
PrintablesAlpha

IROM Sights (I Ran Out of Money Sights)

Print them out at whatever percent infill you deem necessary, I don't use much, then insert piece of filament into holes. may have to be drilled or sanded out. And boom, you are done. Tolerances may vary, and I am not responsible for any…

Downloads
114
Likes
15
Rating
5

Nerf Flip-Up Picatinny Sights

Basic flip-up sights for Picatinny rail, meant for Nerf. Down- open sights. Up- aperture. Uses a piece of filament as a hinge pin and 4-40 screws for mounting to the rail. The sight pieces should be a very very tight press fit. Press them…

Downloads
113
Likes
33
Rating
4.5
P
PrintablesRibwich

Hadley Telescope Tritium Sights

These modified front and rear sights have a cavity to hold a 6mm x 2mm tritium vial which can be sourced online in a variety of colors. It acts as a glowing pointer, and I think it looks pretty awesome. I recommend a drop of cyanoacrylate…

Downloads
112
Likes
23
Rating
5
P
PrintablesDavid B

Spider Sights with Picatinny

Front and rear Anti Aircraft style Spider sights with Picatinny mounts for use on any standard rail section. The Picatinny attachments were designed on the low end of tolerance, so they might require a small amount of filing and fitting.…

Downloads
111
Likes
13
Rating
0
P
PrintablesMscottie

Unconscious Mind insights boards overlays and client/dream card organizers

UPDATE Feb 10, 2025 I have added an overlay for the cracked insight dial. Both insight dials (normal and cracked) plus their corresponding overlays still fit in my remix of js500's player trays. (Barely!) I printed these using BambuLab…

Downloads
105
Likes
13
Rating
0
P
PrintablesEccentriclulz

Adjustable Picatinny Nerf Sights

Requires only 3 (EA) M3 nuts and bolts. Also optionally requires a small amount of super glue. Print in orientation as imported into slicer, with supports touching build plate enabled. Adjustable rear sight is assembled in the same…

Downloads
100
Likes
29
Rating
0
P
PrintablesTritschi

Front Sights for Feinwerkbau FWB AW93 .22lr Pistol

Files contain several front sights for your experience. After you found your best fit, you can buy original metal front sights. Designed in TinkerCad. Printed wth MK3S+ (PLA). Mind: The indication of 0.5mm or 1.5mm was done with a laser…

Downloads
99
Likes
2
Rating
0
P
PrintablesCorvus

Front Sight --- Pinpoint Nerf N1 Blaster --- Iron Sights

Front Sight for the Nerf N1 Pinpoint So that you can at least hit something somewhat if you decide to aim throug the “scope”. After some trial and error, I think I've found a good height and shape so that you can aim through the fake…

Downloads
96
Likes
16
Rating
5
P
Printablesjjeeffff

No-hardware Picatinny Ironsights

This is a simple pair of ironsights, stylized to match my Shellfish blaster. Print 3 of the pins. Prints are oriented for optimal printing. Consider using spare filament to fill the slots with an eye-catching color.

Downloads
95
Likes
19
Rating
0
P
PrintablesTheCase

Nerf Rivals Apollo Hard Sights

The priming hook is not exactly the best indicator for aiming purposes, so I designed a snap-on front/read sight kit for your blaster! Print instructions I used a dab of fluorescent orange paint to highlight the front pin. Sloppy, I know.…

Downloads
94
Likes
18
Rating
5
P
PrintablesKN16

General Direction Sights.

What started as a quick 30-minute CAD doodle—a set of super-simple picatinny iron sights—has somehow turned into a fan favorite. These little wonders cost just 64 cents worth of filament (and weigh 64 grams, because I like symmetry), take…

Downloads
92
Likes
23
Rating
0
P
PrintablesManta Design

Picatinny Iron Sights

The Manta-IS (iron sights) were designed to provide a clear sight picture and an easy printing experience. Only requires two M4x30mm screws to attach. After printing, trim three 6mm sections of filament. Use pliers to squeeze the filament…

Downloads
91
Likes
34
Rating
0
P
Printablesba-doesstuff

MOSPAS Back-up Iron Sights

MOSPAS, short for Modular Open Source Picatinny Attachment System, is a free to use modular series of 3D models, meant for creating custom 3D printed attachments for a rail integration system (RAS) such as Picatinny or NATO rails.…

Downloads
90
Likes
43
Rating
0
P
PrintablesCorvus

Iron Sights Bar -- Low Profile -- Hardware Free -- Picatinny Rail -- Foam Dart Blaster

Low Profile Iron Sights Bar -- rear and front sight combined in one piece -- hardware free Clearly visible and low profile iron sights for foam dart blasters with picatinny rail. If it sits to loose, put a small piece of 2mm crafting foam…

Downloads
88
Likes
22
Rating
5
P
PrintablesAcorn Armaments

No Hardware Mini Iron Sights

No Hardware Mini Iron sights Picatinny Compatible Designed for small blasters such as the OFD Hana ~10g of filament All parts are pre-oriented for no supports (if your printer can do a single 10mm bridge) Print two of the body you prefer,…

Downloads
86
Likes
26
Rating
5
P
Printablesjg

Ruger MKIV Sights

These rudimentary sights were made for a Ruger MKIV Barrel that is only 2" long and needed some sights. It uses the rail mounting screws that come with a Ruger MKIV. Print horizontal with the sights facing up and use some supports/raft on…

Downloads
81
Likes
13
Rating
5
P
PrintablesSiris Rui

Quick Point Sights (Folding)

(1 piece) machine screw with hollow round head m3 x 32mm (1 piece) machine screw with hollow cap head m3 x 10mm (2 pieces) machine screw with hollow cap head m3 x 25mm (2 pieces) machine screw with hollow cap head m3 x 16mm (1 piece)…

Downloads
80
Likes
16
Rating
4
P
Printablesippe

Recurve Bow Sights

I have Avalon Basic sights on several recurve bows but they keep breaking on one weak spot when people handle them roughly. Replacement part is not available and new sight package is 15€. So I modelled the part and fixed the weak spot and…

Downloads
79
Likes
19
Rating
0
P
PrintablesAlbino_Orange

Tiny Low-Profile Picatinny Iron Sights

Super small iron sights I designed to be glued on picatinny rails without interfering with other accessories. I mounted them on my Nerf blasters and they work great! They are easy to align when you want to use them and small enough to be…

Downloads
76
Likes
11
Rating
0
P
PrintablesCorvus

Clip-On Iron Sights ___ Nerf N1 Agility Blaster

Clip-On Iron Sights for the Nerf N1 Agility Blaster. It just needs approx 7g of filament. To remove, press upwards with your thumb from the bottom front on one side. The files are already pre-oriented. My print settings for PLA: 0,2mm…

Downloads
72
Likes
12
Rating
0
P
Printableslucas32

Picatinny Flip Up Iron Sights

made it more similar to szeez's iron sights

Downloads
69
Likes
13
Rating
5
P
PrintablesCorvus

Corsair Boom Grip (with and without sights)

I cut my remix of the Boom Grip for the Foxbat in height so that it fits the Corsair. Just slide it onto the picatinny rails. For the upper Picatinny, I built a version of the Boom Grip that has a rear sight and front sight so that you…

Downloads
67
Likes
24
Rating
0
P
PrintablesXYPH

Single Piece SLAB-like Nerf Ironsights

This is a remix of Corvus's Ontos iron sights with the SLAB 's iron sight geometry. Though this is intended for use on the Ontos, nothing is stopping you from putting it anywhere else you want to. Like the original's, you can also use…

Downloads
67
Likes
18
Rating
5
P
PrintablesMeuon

Reversible Shotgun Ring Sights

Designed for a shotgun with a picatinny rail and no iron sights. The 24mm holes were picked to show the potential pellet spread after some experimentation with shells an cardboard at distances I've needed a shotgun (20-100 ft) using…

Downloads
66
Likes
7
Rating
5

Nerf Ultra two sights with ammo holder

This is a remix from https://www.printables.com/model/221123-nerf-ultra-two-sights I added dart holders to the sights so that you can carry a few more darts Make sure to print the outer wall slowly to ensure a good fit to the tacticool…

Downloads
64
Likes
16
Rating
4.75
P
PrintablesCorvus

Iron Sights __ X-Shot Micro 2.0 Reshell 7 Hammer-Action (by Domochevsky)

Iron Sights __ X-Shot Micro 2.0 Reshell 7 Hammer-Action Iron sights to replace the Picatinny rail of the X-Shot Micro 2.0 Reshell 7 The Iron Sights are simply inserted, just like the original Picatinny rail, and then secured with the…

Downloads
62
Likes
30
Rating
5
P
PrintablesSiris Rui

Quick Point Sights

(3 piece) machine screw with hollow cap head m3 x 16mm (1 piece) Cut out 15mm 3D printing supplies (wire diameter 1.75mm, fluorescent green or luminous green recommended Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro…

Downloads
62
Likes
18
Rating
0
P
PrintablesCorvus

Iron Sights (Low Profile) __ Nerf Rival Knockout Blaster __ XX-100 __ Rival K.O.

Low Profile (slide on) Iron Sights ---> Nerf Rival Knockout For me it fits perfectly but It's a tight fit (like the original rail cover/adapter by ehdrien) and I can imagine that by printer tolerances and depending on the filament used,…

Downloads
60
Likes
17
Rating
0
P
PrintablesMidwest Designs

Dotted Iron Sights for Zinc 2.0

It's pretty simple. Dots for your iron sights made of filament. Jam filament into the hole with some super glue and you have some nice circles to line up for your sights.

Downloads
60
Likes
8
Rating
0
P
PrintablesS&L's 3D makes

Nerf Assault Rifle Sights (1.0)

I made this because all the ones I found were too complex or just plain stupid, no offense to those who made them. srry.

Downloads
59
Likes
10
Rating
0
P
PrintablesHirte

Steambow Stinger backup sights

When using a red-dot on the Steambow AR-6 Stinger 2 you loose the ironsights. If you have the right-front picatinny rail and the magazine-cover with the picatinny rail you can now use these backup sights if the red-dot battery dies. Front…

Downloads
57
Likes
3
Rating
0
P
PrintablesCorvus

Iron Sights -- NERF Rail -- Low Profile

Low Profile Iron Sights (NERF) Clearly visible and low profile iron sights for NERF tactical rails. Put a piece of 2mm crafting foam between the tactical rail and the iron sights to fix it. That works always great for me. Tested with:…

Downloads
55
Likes
12
Rating
5
P
Printableslucas32
Downloads
55
Likes
15
Rating
0
P
PrintablesFemlingDesign

Better Ontos Iron Sights

The Ontos is an amazing blaster, but doesn't come with a great solution for iron sights. Two small prints fix this and add a sci-fi M-16 look to the blaster. M3x25mm Screw and M3 Hex nut required for the rear sight. The included rear…

Downloads
53
Likes
19
Rating
5
P
Printables3dmints

longshot pro sights

these are simple sights that dont need any hardware but you can use 3mm screws if you want. everything is a very tight fit but its soposed to be. the front sight post should be pushed all the way in and the rear sight post should match…

Downloads
52
Likes
6
Rating
0

Picatinny scope mount and 20mm raiser, with options for stacking sights

A prototype of a scope mount i have been working on for airsoft or a small caliber rifle (.22/9mm) Use high infill, 4+ walls, and a tough filament for extra durability. I use PLA+ or PET-CF for this application. Hardware that is needed to…

Downloads
49
Likes
7
Rating
0
P
PrintablesTokifoyo

Gamo Dovetail Iron Sights

Front sight slides over the front of the barrel and can be held in place with glue or tape. The rear sight is made to clip onto the dovetail rail and can be further secured with super glue if necessary.

Downloads
48
Likes
5
Rating
0
P
PrintablesfA482073

Zuru XSHOT Break Barrel Upgraded Iron Sights

Update 29/08/2026: By request, I have added an additional version of the rear sight which features openings in the top of the sight block to allow for light gathering (when used with translucent filament pieces) much like the front sight.…

Downloads
48
Likes
11
Rating
5
P
PrintablesShanEngineering

Camera Hot Shoe Iron Sights

Basic hot shoe attachment that puts small iron sights on to help aim long lenses. The distance is pretty short and it is nonadjustable, but it's better than nothing. From experience a proper red dot sight is much more useful, although it…

Downloads
47
Likes
5
Rating
0
P
PrintablesJem657

Picatinny rail open sights

Open ring sights Glue the ring onto the frame after printed Drill the holes to whatever fiber size you have, or drill it to 1.75 and use some filament. Glue it in after you push it through. Use a M4 bolt to attach This should work if you…

Downloads
47
Likes
11
Rating
0
P
PrintablesMscottie

Unconscious Mind player box remix to fit insights boards overlays and client/dream card organizers

This is a remix of the player box from js500's brilliant Unconscious Mind insert to fit my insights boards overlays and client/dream card organizers . (Be sure to print the “_thin” variants of my models to be compatible with this remix.)

Downloads
46
Likes
7
Rating
0
P
PrintablesJagan

FWB p8x, p11 and Pardini kid sights key

For better grip ,print with fuzzy skin.

Downloads
45
Likes
2
Rating
0
P
Printablesheagly

VSR-10 Iron Sights

Print both sights with the flat face on the build plate. Shouldn't need supports. You can attach the front sight with tape or with a screw through it to stop rotation.

Downloads
44
Likes
6
Rating
0
P
PrintablesCorvus

Extra Low Profile Iron Sights -- Picatinny Rail -- Foam Dart Blaster

Extra Low Profile Iron Sights Extra low profile, hardware free iron sights for foam dart blasters. Simply slides on the picatinny rail. If necessary secure them, with a small piece of 2mm crafting foam at the picatinny rail, like shown in…

Downloads
44
Likes
20
Rating
5
P
PrintablesCorvus

Nightingale 2.0 Top Rail with Iron Sights -- Worker Nigthingale

I wanted to have larger and clearly visible iron sights (with a bit of SciFi style) for my Nightingale 2.0 blaster and put iron sights directly on a flat section of the toprail. It can be attached directly with the two screws of the top…

Downloads
43
Likes
20
Rating
5