Brother skitch PP1 sock embroidery frame
Basic primitive hoop edited for embroidering socks on the brother skitch pp1 embroidery machine Hardware: 8x 10x2mm round magnets
- Downloads
- 1,004
- Likes
- 42
- Rating
- 5
89 models
Basic primitive hoop edited for embroidering socks on the brother skitch pp1 embroidery machine Hardware: 8x 10x2mm round magnets
Purpose This sock frame (or sock hoop) is an add-on for the 10x10cm frame for the Brother Skitch PP1, a cheap free arm embroidery machine, for printing on socks and similar items. It replaces the standard the magnetic cover and you will…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This is a basic primitive hoop intended for making custom hoops for the brother skitch pp1 embroidery machine Hardware: 8x 10x2mm round magnets
In a Facebook group a Teacher asked for a single skittle candy dispenser. This is gravity based and will allow one candy out a time by pushing and pulling the slide. If you like this model and want to see more, consider donating to my…
1:18 scale model of a suskityrannus, a small tyrannosaurid. The model features detailed scale and feather texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer height…
Crimper Die/jaws Case Proskit to compleat a case you will need 2 x M3 24-25mm nut.
A cute lizard I created in Blender while listening to a talk at my local LUG. I used the skin modifier and a coulpe of vertices to sketch out the shape, and then used sculpt mode with dynamic topology to create the high res model. Started…
None of the existing mounts fitted my Handskit 927 soldering iron, so I did what any self respecting maker would do and designed my own!
A remix of Dragonfirefly's excellent skittermander, posed with some props to make him look more combat-oriented. Print instructions Category: Animals
Before I built the game I was not sure whether the skittles would have enough weight. However, printing the skittles at 80% infill, putting a 10mm diameter mild steel disc on the bottom of the skittles and having a 4mm diameter magnets…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Surskirt, Tabletop DnD miniature with or without 25mm medium base which can be used for DnD and…
This is a remix of Vector3d's VLMP soldering iron holder. I found the basic holder kept pushing the soldering iron out of the holder when I applied downward pressure. This adds adjustable screws to increase the tension. You will need the…
I was getting frustrated with how easily the Pro'sKit SS-969 heat gun would fall out when moving the whole thing. This replacement part holds the heat gun more securely. (You can still easily take it out when you actually want.) Print…
Ready for comments) I am ready to study with you)
Holds the FPV antenna on the QAV-Skitzo. It slides onto the standoffs and has holes to pass a zip tie so it holds firmly against the top plate. ** (28.07.2017) added v2 which has a slicker design Plan to: Add a way to secure also the RX…
This is an education model that represents the typical perovskite crystal structure of materials such as metal halide perovskites (e.g. CsPbBr3), used as a next generation material for photovoltaics (solar cells or LED lighting). I…
There already is a similar case, I just needed a smaller one. I found the other one non-remixable (poor geometry), so I took inspiration and designed a new one for my set of dies. It's print in place, you need nothing else to complete it.…
Entlüftungskit für Shimano Scheibenbremsen
Printed at .2mm layer height with Aurarum Petg. When slicing add an M600 at 17mm, then you can add 10x 3mmx3mmDiameter magnets commonly found on ebay. maybe if not a tight fix add a drop of CA glue. On my second print I had a row get…
This is a mechanical critter from Candlekeep Mysteries like a mechanical scorpion with good parenting instincts. They can be quite dangerous! This is an AI model but like my of my AI models I did a fair amount of adjustments to the mesh…
This is a replacement for a pin/clip that is used to secure Dynafit-style ski crampons to your bindings - in case you lost those little pieces of plastic, or want to carry an extra set on you long backcountry tours :) A small eye for 2 mm…
5 skittles, one of each color. red, orange, yellow, green, purple. (seperate before print)
A gift that went better than expected so decided to upload it. On my prusa mini i had to cut it. So the printfiles have you covered with all that. And also a filament switch for the "namebadge". And also, Acrylic glas 106x186x4.5 Added…
Choose Gridfinity 2x3 bin or separate holder.
A genetic advancement of the original 'Skitter Bug', the Narn has a tentacled mouth that secrets a numbing toxin. Print as many segments as you like for length Print instructions Category: Creatures
The Skitter-Walker is a compact combat machine fielded by the Ashmaw Clans , built from salvaged industrial components and armored with crude scrap plating. Low to the ground and supported by four rugged mechanical legs, it carries the…
This is a flexible shaft of pro'skit variable speed rotary tool kit. I designed this model to modify my Creality CP-01 printer, so i can made more accurate PCB's traces since original motor and head have unacceptable precision. You can…
Used under Paizo's Community Use Policy ( paizo.com/communityuse ), and using a model by Dragonfly, this little guy is ready to rumble with whatever the Pact Worlds want to throw at them. I've tried FDM printing a few times, but the…
The spring of my filament cutter (ProsKit PM-396F) broke down and I made a new spring. I will be glad if anyone could use it. Printed with GD Filament PA-12 on epoxy bed.
Tested PLA 0.2mm, random seam. Filament need cca pin 17m (50g), ball 20-25m (50-60g). For ball completation use glue for hard plastic (UHU Tamyia…) if You need. You can use tennis or cricket ball too I think. Storage box included (size…
This machine organizes skittles by color into neat little containers. mounts on skådis for maximum practicality. Reference the STEP assemblies for assembling. Part list: -M8x500mm threaded rods. 3x -Arduino mega -Nema 17 x3 -Nema 17…
I made a door handle for the moskito door for my mother, the company didnt want or could not sell a door handle. So i made one. Im still improving it. The handle just clicks in the rail. From the picture to the .3mf file i offer, are some…
Skitzo Nova Lumenier AXii VTX & RX Antenna Holder Mount for Racing Quad Halter für das SMA pigtail (2x3m Schrauben) und RX Antenne mit 90 ° Winkel und XT60 Kabel das Pigtail wurde etwas im winkel nach unten vesetzt sodass die Antenne…
On a ski tour, I ripped off the holder of my skins. Therefore, I designed this solution. First, the holder is threaded through. Then the skin is clamped in between so that it can be sewn together with the holes
This tool to help with bearing removal
The metal tray for my soldering station stand was very rusted and looks awful. So I designed a replacement one in Fusion 360. Printed in ABS and it fits perfect. Print Settings Printer Brand: Anycubic Printer: i3 Mega Rafts: No Supports:…
I made it to fit every crimp die model i have - unfortunately most of models available on the internet were too small for my dies, so i had to make it from the scratch. My dies are from pro's kit, but it should fit compatible dies by…
This is a 2x3-grid holder for Pro'skit 7402 hex nut driver set . This holder is compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have…
This Object lets you mount the TBS Unify antenna (and your RX antennas) on your Lumenier QAV-Skitzo Dark Matter. Printed in TPU (NinjaFlex) for maximum durability and also to protect the antenna on impact due to the flexibility. Other…
This Object lets you cover the arms of the QAV-Skitzo for additional protection. If there is the interest, I could also add a motor shroud to protect the motors also if required. The v3 is doubling as a arm bumper and motor soft mount.…
BNC_50AD Nose cone (Used on the Fliskits Stingray)
so basically just my maker coin, nothing special ender 3 neo prusa slicer 0.4mm nozzle quality 0.2mm speed 40mm/s nozzle 205c bed 60c used white for base and black for letters PLA
Created since I was missing one CAP to my hammock.
I design a copy of the Proskit Sd-9814 Screwdriver Cap at the request of a friend who lost his. I hope it helps whoever. The original: My design to replace it:
Gridfinity Holder for Proskit PM-919
Magnethalterung zur Befestigung eines Moskitonetzes an der Wand oder Decke. Zusätzlich werden pro Halter zwei Neodym-Magnete 12mm Durchmesser und 8mm Höhe sowie 3 Schrauben 3mm benötigt. (Magnetic holder for attaching a mosquito net to…
i got the jetski image from this website https://superstencil.com/en/transport-stencils/jet-ski-stencils and then i used inkscape and fusion360 to make a stencil because someone asked me if i would make one... so here it is... you can…
This is my first upload to Printables, and one of my first successful models from inital problem to solution. These Pro'sKit organizers only come with 12 dividers and have 21 slots. Originally purchased @ Micro Center. Here's the link to…
This Object lets you mount a FrSky XSR and a buzzer on the Lumenier QAV-Skitzo Dark Matter. Printed in TPU (NinjaFlex) for maximum durability and also to be able to fixate the buzzer (press fitting). Other things for the Lumenier…
Eachine ET526 mount for QAV-Skitzo frame. Print Settings Printer: Tevo Tarantula Rafts: No Supports: No Resolution: 200 Infill: 20% Category: R/C Vehicles
Customized version of http://www.thingiverse.com/thing:739573 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: ruler_unit = 10 font_narrow_widen = 0…
Gridfinity bin for Proskit CP-751 series crimping tools
This Object lets you mount a GoPro Session 5 (and probably 4) on the Lumenier QAV-Skitzo Dark Matter with an angle of 20°, 25° and 30° degrees. Printed in TPU (NinjaFlex) for maximum durability and also reducing vibrations in the recorded…
Clamp that fits around a 70mm window skirting board that clams a anti flying critters mesh
Gridfinity bin for Proskit CP-462G Ferrule Crimpers
My camera has been broken so, this is what I got for now.
Untersetzer mit dem LOGO der Moskito TSG 1902 Ketsch 3mf für Prusa MK3.5 mit mmu (mmu: 1 Weiß, 2 Schwarz, 5, Rot)
Hi Everybody Easy screw driver holder all PLA and you wil need M2.5 plastic screw 6 each Enjoy
Separated to parts. To make color print w/o AMS
English: ✅ Insert for the Greek board game "Skitsografies Akatallilo" ✅ Separated main drawing cards and starter/score cards ✅ Markers and clip boxes can stay in the game box, as they can easily be removed ✅ Two-compartment word card box…
Box divier for Pro's Kit organizer. Suits 103-132D (903-132D) model. There are 3 versions: "standard" - just divider, “lite” - trimmed down version for faster print (~25% faster), “with note” - with place for paper label (hole is 30x15mm).
A Skittles dispenser where you put Skittles of your choice in the top and then pull a part and out come skittles
Knob Spring for ProsKit MA-016 Headband Magnifier replacing original foam spacer.
100x160mm sign, with art of a spider and text "Skitter Critter" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you…
The grindfinity holder for the ProSkit desoldering pump fits perfectly and can be easily removed. There is a cutout on the back for easy removal.
Replacement for a broken part of base block clamp. I used PETG with high infill. Highly recommend adding a washer, I wonder why it wasn't there in the original part.
It's a vintage wooden game I played many, many years ago and it popped into mind as a idea for another miniature printable thingy. So here you are, it's not complex to build or play, after a search around I found that these two were the…
I'm still working out what is the best filament to survive the freeze drying process without warping or poisoning me to death. I have JSCAD code to generate these for any tray size and printer bed size, but can't upload it here. The…
Ten skittles and a ball for table-top or hallway bowling: set the pins up in a triangle and roll. The pins have a proper skittle shape with a wide base so they stand well but still topple satisfyingly, and the ball prints as two halves…
Blokada ( zatrzask) moskitiery okiennej zwijanej z leroy. Na zdjęciach czarny wydrukowany, biały oryginał ( który często się łamie). Lock (latch) for a roll-up window mosquito net made of Leroy. The photos show a black print, the original…
Lost yours too?
Replacement collar for the soldering iron stand of the Proskit SS-203B / ZD-99 soldering station. The original black plastic collar on my stand broke, so I measured it and modelled a replacement. It slides onto the slotted metal sleeve…
This is a candy dispenser for halloween when you arent at home and still want the kids to get some sweets and have a little fun. It is designed for skittles but I guess it will work whith other similar sized sweets. Assembily Instuctions…
This is an education model that represents the typical perovskite crystal structure of materials such as metal halide perovskites (e.g. CsPbBr3), used as a next generation material for photovoltaics (solar cells or LED lighting). I…
Used under Paizo's Community Use Policy ( paizo.com/communityuse ), and using a model by Dragonfly, this little guy is ready to rumble with whatever the Pact Worlds want to throw at them. I've tried FDM printing a few times, but the…
100x160mm sign, with art of a spider and text "Skitter Critter" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you…
A Skittles dispenser where you put Skittles of your choice in the top and then pull a part and out come skittles
The grindfinity holder for the ProSkit desoldering pump fits perfectly and can be easily removed. There is a cutout on the back for easy removal.
This is a 2x3-grid holder for Pro'skit 7402 hex nut driver set . This holder is compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have…
Tested PLA 0.2mm, random seam. Filament need cca pin 17m (50g), ball 20-25m (50-60g). For ball completation use glue for hard plastic (UHU Tamyia…) if You need. You can use tennis or cricket ball too I think. Storage box included (size…