Slatwall Power Strip mount
A slatwall designed power strip mount which can be slided inwards and carry a powerstrip without restricting any access.
- Downloads
- 61
- Likes
- 30
- Rating
- 0
211 models
A slatwall designed power strip mount which can be slided inwards and carry a powerstrip without restricting any access.
A collection of mounts for mounting Milwaukee M12 tools onto Slatwall. They may look thin and flimsy but you'd be surprised how strong these are even in basic PLA if you print these with a lot of perimeters. I used a 0.2mm layer height…
A collection of holder and base pairs that I use to mount my Ryobi 18V tools on Slatwall. This makes your tools easily accessible and allows you to show off your collection as well. These are very similar to the other models I used to use…
I guess Slatwall is the 8-track/Betamax of organization systems. But in case you use it, here's a remix of a box along with a shelf and add-on adapter. To use the adapter in a 3D modeler to convert a Pegboard accessory for compatibility…
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not If this saved you a bunch time, trouble,or a solution to and annoying problem feel…
An assortment of hooks for standard 3" Slatwall such as storeWall. All of these are based on the same base model that clips nicely into the Slatwall so that your hook won't pull out but can still be slid around if needed. Note that I have…
This is a slatwall storage solution for your Magpul PMag magazines for 5.56/.223 AR15 or variant. This design uses metal slatwall hooks found on Amazon for additional security.…
Similar in concept to the storeWall tripod plier storage stand but now you can print it yourself at a fraction of the price. Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with…
Updated 6/9/25 I've updated the lock so now it has a tab on the bottom to make “unlocking” the hook much easier. While looking around for more economical hooks to use with my newly purchased Proslat, I saw quite a few on both Amazon and…
VESA mount for 3" T-slot slatwall systems, such as NewAge slatwall system, or Gladiator slatwall system. Print standing upright/vertically with no supports using PETG. Attach your display to the VESA mount with 4 M4 screws, then hang the…
Hang your tools on your slatwall with this double hook
Model prints well on its side with tree supports note: pic is on proslat, which is not the same height as standard slatwall.
printed in pla. top side down on print plate. Used supports under the tool hook.
SlatWall mount for Ruger 1022 magazines. Holds up to 5 original 10 shot or 25 shot extended magazines. Ledges designed into the corners to allow 10 shot magazines to safely sit without chance of falling through. 25 round magazines slip in…
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not Category: Sport & Outdoors
I liked the original spray can holder design so I stuck a slatwall hook on the back to hang my cans on my slatwall. Minimal space taken up and they seem to be holding up okay. Surprisingly stable. Printed in PLA, but I imagine PETG might…
Collection of Slat Wall holders for containers, bins and tools. The tool holder and caliper holder used supports to print because the orientation should be considered to maximize strength. (I haven't tested but figured the layer adhesion…
Need an extra hand in your workshop or maker space? Slatwall Hand has you covered! This is a hand hook designed for slatwall. Recommend printing with snug supports, with fingers up.
A simple light duty small shelf for use with standard 3" slatwall. I suggest printing with 4 perimeters and 15-20% infill or so. I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not…
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not Category: Sport & Outdoors
Made this to hold rolls of paper towel in my garage where I use the Proslat system for storage. Printed PETG 15% infill No supports about 13H for the pair.
A collection of mounts for mounting Ryobi 40V tools onto Slatwall. I usually store my leaf blower without the battery inserted, just in case the little nub that holds it up can't handle the weight, but so far it seems plenty strong…
Works with Ruger BX-25 and Butler Creek 25/22 mags but not the factory 10 shot(fits but tight) For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if…
Print out the three holders. I use a 1" x 48" wooden dowel like this one: https://www.homedepot.com/p/1-in-x-48-in-Raw-Wood-Round-Dowel-HDDH148/203360196 one 4 foot dowel can hold over 30 lbs of filament! built specifically for 1kg…
Slatwall storage option for digital caliper
Open and closed boxes for organization of things like pliers, scissors, pens, and other etc items on Slatwall. Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that…
Utility Hook for Slatwalls, can be used for umbrellas, hanging pictures etc.
A spool holder to hang your filament spool on a slatwall. It's designed to hold a spool with a 2" hole that is 2.25" or less wide. Note: If you were one the the first eight people to download this, that file was completely the wrong size,…
Made to fit in the 1/2" metal slatwall built into a cubicle, this will hook in for a wall-mounted headphone holder. There are 2 versions - a solid and hollow one. Printing the hollow one may actually take more time and filament because of…
This is a slat wall mount to hold your Harbor Freight ICON T-Handle tools in an organized and convenient manner. Printed in PLA with no support, printed vertically (longest side vertical). Separate files for Metric hex, SAE Hex, and Torx.…
As this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print on side. See other slatwall items at https://www.printables.com/@HighDesertHacker/collections/2835948 If it…
Requires two M4 heat set threaded inserts, 4-6.0 mm long. Mounting point hole separation is 2.0". As this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print standing on…
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
This headphones hanger mounts up to steelcase slatwall.
SlatWall Shelf Voronoi Style with Price Ticket Holder - Piano per parete attrezzata con porta comunicazione - Voronoi Style Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your…
Slatwall Apparel FaceOut Type AERO - Gancio per parete attrezzata Tipo AERO Lenght-lunghezza 150mm Resize to adjust dimension All our designs are free to download and use—because sharing drives innovation. Your support fuels our…
This is a price tag holder that clips easily onto slatwall, that is sized to fit address label sized price tag stickers.
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not Category: Sport & Outdoors
As this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print on side. See related slatwall models at https://www.printables.com/@HighDesertHacker/collections/1784497 If it…
This is a heavy duty slatwall hanger. Resin and Filament can be weak and break easier than you wished it would. So i decided to make a heavy duty hanger so you can comfortably hang heavier items up with your printed hooks. Overall it…
See other slatwall items at https://www.printables.com/@HighDesertHacker/collections/2835948 If it works for you, please Like. A Make is always appreciated.
3 handy tools for hanging things on your slat wall!
A Multi-Tool blade Holder that uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. The blade holder part is more or less the…
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
Looking for something to add to your build to make it slatwall compatible. This is it……. Please insure the depth of your build and accommodate for the proper hang.
Fully parametric router bit holder. Designed for 10 bits by default (covers the maximum print dimensions of most 3d printers at 15+") and can be easily reduced by editing the “Number_Bits” parameter, automatically scaling in size. There…
Use with my 5"x4.25" slatwall adaptor or direct wall mount. If it works for you, please Like and post a Make for others to see.
Every needed to make a sign for slatwall. Use this handy dandy adapter and the text tool to create whatever you want. Letters are set for 6 inches. Adjustments can be done, just don't use the percentage tool as your hooks won't catch.
The pen/pencil caddy that came with my Slatrail desk is so small, was a joke. So I made a simple, bigger one. It is boxy, but holds a lot of pens. I used PETG to print mine with supports for the the clamp section. Any resolution should be…
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not If this saved you a bunch time, trouble,or a solution to and annoying problem feel…
This is a system to mount things using screws on slotted mdf boards. Print instructions Screw_holder2.stl: Normal fit, gap 11 mm, internal slot front 30 mm, internal slot back 31 mm Screw_holder_loose.stl: Loose fit, 1 mm less from the…
Use wallmounts from Open Armory: https://www.printables.com/model/413796-open-armory with MDF slatwall/slotwall panels. Access to the edge of the panel is necessary, these are slid in from the end. Two widths provided, full and half…
An AMS slatwall mount specifically for the Proslat PVC Slatwall , also available on Amazon . These brackets are 20mm thick and have four locking pegs on each side to secure the AMS on the mount. You can see from the pictures that I also…
Slatwall Apparel Waterfall - Supporto a cascata per parete attrezzata Lenght/Lunghezza150mm Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Other
Print Recommendations - PETG. As this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print on side. See other slatwall items at…
Filament spool mount for 3" T-slot slatwall systems, such as NewAge slatwall system, or Gladiator slatwall system. Features All parts print with no supports Can be used for spool storage or for printing When printing, the filament unwinds…
Holder for Carpenter Square. I made it for my Milwaukee Carpenter Squares. Print with tree support on build plate only.
For assembly - requires 1-inch dowel: - x1 455mm length; - x1 445mm length; Such length allows for two brackets to be built out of a 6-foot, 1-inch dowel!
Designed to use Tool Shop wall mount slat wall cabinet hanger brackets…
This is a 3kg or 1kg spool holder designed specifically for the Proslat PVC slatwall system and holds the filament sideways to provide a straight path into the rear Y-port on the Bambu Carbon X1 printer. Just 4 parts to print, the main…
Simple caliper holders to mount to Slatwall. It can be printed at any resolution, I printed this at 0.55 mm layer height with a 0.8mm nozzle but any size should work.
Works with Uzi mags and Colt 9mm ar mags using M5x15mm If this saved you a bunch time, trouble,or a solution to and annoying problem feel free to tip me a buck for a coffee Category: Sport & Outdoors
Wanted to make a substantial model to prevent it from starting to sag etc over time. You can experiment with hollowing it out to various degrees but i printed 100% infill so that it will hopefully last a long time.
Designed for mounting on a wall, or attach to slatwall with adapter. Can also stand on it's own. Dimensions: 3.5" L x 2.3" W x 3.9" T For slatwall mount, use my 3.25" slatwall adapter…
Like the rest of the Slatwall models I am releasing with the ‘ hookhybridslatwall ’ tag, this hanger for a DeWALT 20V MAX Drill clicks together with a couple cheap 4-inch metal hooks to avoid having a printed plastic part in the key…
SlatWall Apparel FaceOut 150mm Lenght-lunghezza 150mm Resize to adjust dimensions All our designs are free to download and use—because sharing drives innovation. Your support fuels our creativity, if you download/enjoyed this file, please…
If it works for you, please Like and post a Make for others to see.
Every needed to make a sign for slatwall. Use this handy dandy adapter and the text tool to create whatever you want. Letters are set for 6 inches. Adjustments can be done, just don't use the percentage tool as your hooks won't catch.
Hooks made for a slatwall to hold your video game controllers. Works with XBOX One, PS3, PS4, PS5, Switch controllers. Printed originally with PLA. It works well.
have some nice wall mounted plates i printed off for me orbital sanding pads, but they hang flat to the wall and waste a lot of space. I wanted to make a shelf so i could stack them. I printed a single test job to make sure fitment was…
See other slatwall items at https://www.printables.com/@HighDesertHacker/collections/2835948 If it works for you, please Like. A Make is always appreciated.
Mützenhalter für Spacewall Lamellenwand. Der Kopf braucht nur mit wenig Infill gedruckt werden. Den Halter habe ich mit 3 Wänden und 30% Infill gedruckt. Hat holder for Spacewall slat wall. The head only needs to be printed with little…
print top side down 3 walls 15% fill
Remix of “Pegboard Tape Holder” by Rordaz on thingverse, but for slatwall use. https://www.thingiverse.com/thing:2962025 Uses 3/8" dowels, you may need to sand/file the holes on the print and the dowel ends for a working fit.
If it works for you, please Like and post a Make for others to see.
Slatwall section for misc mounts. Use with my mount adaptor to use slatwall accessories on your BuildPro welding table. Print this vertically to print slots without supports. More info at blog.outpost4.org.
I wanted to mount my Ryobi charger for my new hand tools to my slatwall, but couldn't find anything I liked that still let me charge at the same time. Printed in PETG and with supports, the 3MF has the mounting pins sliced from the model…
Custom shelf for Alza Slatwall monitor mount rail. https://www.alza.cz/alzaergo-swp110-lista-bila-d6097296.htm They do sell their own shelf and pen holder, however since I have my own pen holders and space on my rail is limited these…
Like the rest of the Slatwall models I am releasing with the ‘ hookhybridslatwall ’ tag, this hanger for a DeWALT Battery Charger clicks together with a couple cheap 4-inch metal hooks to avoid having a printed plastic part in the key…
I wanted to be able to get a hand tool easily, with one hand. Smoothly get the tool, use it and push it back into place. The majority mount design, provides greatest functionality, for drill, bit driver, air pump and brad nailer. Use the…
This is a very simple remix, I just added a hole for the blade changing handle, and attached a slatwall connection to hang it. I print these on their side for strength which requires support anyway, otherwise I would have worried more…
This is a small keyring holder that will fit into the Steelcase brand Cubicle slatwall. It is modeled loosely off their discontinued part, with several minor changes to make it a stronger print. You will need to print this with support.…
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
Menards PVC slatwall is simply the best. It's the cheapest, lightest, and easiest to use. Unfortunately, it does not employ a standard slatwall profile. This is why I have designed quite a few Menards slatwall accessories, which I will be…
Mounts for the RYOBI Battery Chargers.
Designed for mounting on a wall, or attach to slatwall with adapter. Can also stand on it's own. Dimensions: 3.5" L x 2.3" W x 3.9" T For slatwall mount, use my 3.25" slatwall adapter…
Every needed to make a sign for slatwall. Use this handy dandy adapter and the text tool to create whatever you want. Letters are set for 6 inches. Adjustments can be done, just don't use the percentage tool as your hooks won't catch.
Like the rest of the Slatwall models I am releasing with the ‘ hookhybridslatwall ’ tag, this hanger for a DeWALT 20V Reciprocating Saw clicks together with a couple cheap 4-inch metal hooks to avoid having a printed plastic part in the…
This is a Makita Battery Charging Stand that tilts the charger at a more user friendly angle. It was designed for the DC18RC charging unit but may fit others as well. It can be used sitting on the workbench, tabletop, wall mounted,…
I couldn't find a slatwall hook to hang my round wood rasp, so here is a 3D print. There are two parts, the slatwall hook and the tool holder. The tool holder requires supports. Once printed, add some superglue and put the two parts…
Adapts a phone with a standard 2 or 3 screw wall hanging mount to the modular Slatwall system found in some Steelcase cubicles. Instructions Print with moderate infill and extra perimeters. Screw in 2 or 3 self-tapping PC case fan screws…
Requires two M4 heat set threaded inserts, 4-6.0 mm long. Mounting point hole separation is 4.0". As this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50% infill wall overlap. Print standing on…
Designed for mounting on a wall, or attach to slatwall with adapter. Can also stand on it's own. Holds mobile phone, including case. Maximum size of 3.25" W x 6.5" H x 0.56" D. Cutout at base for charging cable. Print on it's side with…
See other slatwall items at https://www.printables.com/@HighDesertHacker/collections/2835948 If it works for you, please Like. A Make is always appreciated.
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not Category: Sport & Outdoors
Every needed to make a sign for slatwall. Use this handy dandy adapter and the text tool to create whatever you want. Letters are set for 6 inches. Adjustments can be done, just don't use the percentage tool as your hooks won't catch.
A battery holder for Ryobi batteries for gladiator geartrack slatwall. Its a perfect fit for me but you may want to scale up 1% on the z axis (as it sits on the build plate not z axis as it hangs on the wall) for a looser fit on the…
Slatwall holder for dewalt 20v drill. print with high tensile strength material like PA-CF parallel with how it will be mounted.