22 models
Shells for the Nerf Sledgefire blaster that can take a beating. Regular triple shell for Elite darts, single Mega dart shell, shell for a 16mm PVC tube for single Elite darts and a blank shell for anyone that wants to create their own…
New file 2/7/19 that should address length and dart fit issues I had in earlier version. All versions work in mk18. This is a remixed version of slug's shell modified for printing. It should replace stock shells. I made one and it worked,…
This is a remix of xcnerd88's sledgefire shell. The barrels have been adjusted for a tighter dart fit, and the shell is tapered at the front for easier insertion. I have also added bars at the back to prevent pushing the darts too far…
I made some size adjustments. I pulled in the bottom and widened the top, which allows for effective launching of Dart
This is the original version, the version that doesn't need pipes for hardware is here: What would be the Achilles Heel of a Sledgefire? The long reload cycle perhaps. And to remedy this, in designing this monstrosity I have sacrificed…
What would be the Achilles Heel of a Sledgefire? The long reload cycle perhaps. And to remedy this, in designing this monstrosity I have sacrificed everything: simplicity, optimal print orientations, even common sense. Still in terms of…
Couldn't leave the old version alone. First thing I did is make a groove to slot in the cut-off muzzle from the old barrel into the new barrel. now no gaping hole in the front! Looks smooth! NICE. I moved the breech a little closer to the…
Shell: Converts the Nerf Sledgefire to fire 1 half-length dart through a 17/32 brass barrel. Deactivates the air restrictors well enough without needing removal. The brass barrel must be epoxied into place inside the printed shell. I also…
I have three SledgeFires. The first two I cut up and modded, and the third i found in the thrift store with TWO ORIGINAL SHELLS. I want to keep this one stock… But that empty slot in the stock shell storage made me anxious. I tried the…
Stamp to aid with cutting 1/16 Inch (.0625”) thick adhesive backed foam. Improves seal as required for many Sledgefire upgrades! Print as imported, no supports required. Place stamp on a piece of 1/16 Inch (.0625”) thick adhesive backed…
Clips for the Cryptid Sledgefire. Now with improved mega clips. Recommended print settings: 2 walls 15% infill no supports. You might need to clean up some of the cam-track overhangs with a hobby knife.
Made a single shot nerf shell and a MEGA shell for the SledgeFire using the “original” look of the stock shell. I would suggest NOT using the MEGA one if your SledgeFire still has the shell ejecting thingie in the barrel. It does get in…
Perfecting the mount for SledgeFire stock. Made this for fun.
I wanted to shoot silly shells from my SledgeFire. I had to do a lot of shell cutting, but it worked, kinda. Maybe with more springpower, but it shoots Mega and 3 shot shells well. You can throw a MegaXL farther by hand, though. I made a…
Edit: I added another spacer. This one is even harder to put in but yields better power. Spacer for your Sledgefire spring. From eye it seems to be about a 10 fps boost. You should be able to push it over the nub that holds the catch in…
Use instead of original ejector at Nerf Sledgefire, to get out the shells automatically. Print Settings Printer: Elegoo Neptune 2 Rafts: No Supports: No Resolution: 0.2 Infill: 0% Filament: RedLine PLA, PETG Notes: Nozzle 0.4 Wall 0.6…
An alternate Wishbone part for the Cryptid that uses an M3 x 16mm socket head screw. If you have a set of M3 screws and don't want to buy a pack of M6 grub screws you only need one of. Hardware: M3 x 16mm Socket head screw. Just screw the…
Load modded Nerf Sledgefire with ULTRA-Darts. Original Ejector needs to be cutted to a hight of at least 12,5mm. Print Settings Printer: Elegoo Neptune 2 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Lightning Filament: RedLine PLA,…
So I had an old Sledgefire lying around that was toping out at a bout 1m range for one dart and the others flew out only when the stars aligned correctly. so i designed a barrel and leaver to transform it into an very strong single shot…
Printed a bottlenose Silly Shell with an 8 inch barrel. I wondered if i could fit the barrel on a SledgeFire shell. So I tried. And here it is. It will only work with a SledgeFire with the ejector removed, so keep that in mind. (won't…
Wanted my SledgeFire to look like a sawed off stock. Also using this a test model for a future SledgeFire stock idea.
3 barrel shell based on the remixed model, you can modify hole and chambers sizes using boolean in the blend file. maybe make your own 2 shooter shell version 2 is tight, version 3 is looser
![Nerf Sledgefire powerdart mod [NO HARDWARE NEEDED]](https://media.printables.com/media/prints/894945/images/6847490_bbc94f38-c88f-489f-859f-7e59c8f183c2_066ac319-792a-459c-9886-44572a479ea5/1716921545944.jpg)
