142 models
This page includes the overview for all stackable insertboxes - Insert boxes overview all related accessories - Accessories description for the insertboxes feet, which will fit all variants - Insertbox Feet description for the system -…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
These baseplates provide a fixed place for your insertboxes: in your workspace, cupboard, drawer and all sorts of cases. The interlinkable systems allows bigger sizes than any printbed. Besides the injection-molded industrial/trade type…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Stackable Insertbox 1x2 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…
Print approx. €3.31–€4.04 excl. taxPreliminary estimate for PETGSource material: PET
Two stackable storage boxes for my tools. These boxes fit perfectly in the hanging insert in a BOSCH L-Boxx / Sortimo LB 238/374. There is an upper part and a lower part. The upper box has an additional recess underneath to prevent…
Print approx. €7.68–€9.38 excl. taxPreliminary estimate for PETGSource material: PET
As an extension, I created another storage box for the hanging insert in a BOSCH L-Boxx / Sortimo LB 238/374. This fits perfectly under the holder of my mounting magnets. Ideal for storing small parts. Print Settings Printer: Prusa I3…
Print approx. €4.51–€5.52 excl. taxPreliminary estimate for PETGSource material: PET
As a car wrapper, I need my wrap lettering tools on a daily basis. I created the holder for mounting magnets for the hanging insert in a BOSCH L-Boxx / Sortimo LB 238/374. With the magnets, large car films or posters can be aligned, fixed…
Print approx. €5.86–€7.16 excl. taxPreliminary estimate for PETGSource material: PET
This is a CAD drawing for Bosch / Sortimo L-Boxx in the sizes 102 / 136 / 238 / 374.
This is a mounting bracket for the L-Boxx storage boxes by Bosch & Sortimo / BS Systems that works with the L-Boxx G4 and previous gen. L-Boxx. For drawers, shelves, wall-mounting, etc. Features Allows one-handed clipping in and clipping…
Bosch / Sortimo L-Boxx in the sizes 102 / 136 / 238 / 374 in STEP format for those who don't have Fusion 360
Made my own take on a mount for the L-BOXX by Sortimo. These toolboxes are used by Bosch Professional for there power tools and this mount makes it possible to secure your toolbox in the car or on a storage rack in the garage. I used this…
This is a baseplate for the Gridfinity modular storage system by Zack Freedman that fits in a L-Boxx Mini organizer box. It's based on the L-Boxx Mini inner volume model that can be used to make custom L-Boxx Mini inlays that fit…
This is slide for L-Boxx (tested with models 102 and 136 G4) video https://youtu.be/P9l1zlHIJnc printed in ABS added .f3d files.
I think this is the best 'sortimo-like' storage rack available on the internet. It will fit 24 medium and 6 larger harbor freight storage cases. It's easy to build and very functional. The idea is directly to mount the storage case on the…
This is a solid shape that represents the inner available volume of an L-Boxx Mini that I created using this method by Croaky Oak with a small clearance added. It can be used to make custom inserts for tools and other things by…
There was no proper storage options for drill bits in my Bosch drill's Sortimo L-BOXX - but there is a hex pattern inside its top cover - problem solved.
This is a rail system for the Sortimo T-Boxx products. This rail is based on the original Sortimo SS4 product but adjusted to be 3D printable on smaller printers like the MK3. Mirror the file in the slicer to end up with both sides.
These are rails for the i-Boxx organizer boxes that can be used to build custom storage cabinets. The boxes are available from Bosch , Sortimo , BS Systems , and potentially other manufacturers. The rails work with the i-Boxx 72, i-Boxx…
T-BOXX compatible inserts, that are optimised for 3D printing (consistent wall thickness). The pegs should be printed extra and glued in with some superglue. The grid spacing is 52.3mm.
Inserts for the Sortimo L-Boxx Mini. These inserts are intended to be used as two layers in per box. The upper inserts fit the lid tightly, ensuring that even small parts don't move when the L-Boxx is turned upside down and shaken. Yes, I…
Assembly Check assembly instruction pdf for illustrations. Materials Wood pieces 12mm thick (mm) Top (418x338) Bottom (443x338) 2x Sides (338x75) 2x Front/Back (419x63) Insert (for insert box alignment) can be laser cut from 2mm stock or…
Made a custom cabinet in the shop and wanted some Bosch L-boxx style containers so that I could easily toss them in the L-boxx containers. Tested in the older style for those that might want to know. Each one of these has a 10mm wide…
The wall bracket for Bosch L-Boxx Mini's is a practical accessory that allows the L-Boxxes to be attached to any wall
Container boxes for sortimo or bosch L-boxx and I-boxx. fusion 360 parametsics allow the ssize of the box to be coustomised within the standard sizes. Category: DIY
Parameterized insert boxes for Sortimo T-BOXX G (63mm tall, 52mm square) organizing containers so that you can print sizes that Sortimo does not offer. These inserts are designed to stand on small 2.5mm feet in each corner and therefore…
This is a remix of sndstrm's Sortimo L-Boxx Mini Insert for the PR-3254 Crimping Tool I'm using. The two trays come as a set since the upper Tray has a height of 25mm and the lower one 15.5mm to fit the overall height. If you want a…
I was looking for screw sorting inserts for my L-Boxx Mini boxes and found the really cool parametric implementation of @daftwullie_538182 . He based his Scad scripts on the inner volume model of @6d6178 , who unfortunately didn't model…
My model is an enhancement of @daftwullie_538182 great inserts that you can find here: https://www.printables.com/de/model/545542-l-boxx-mini-insets It is based on my enhanced inner volume model of the L-Boxx Mini. I modelled this to…
If you want to build drawers for your L-Boxx system, these clips are perfect. There's a broken STL on Thingiverse, but this version is actually printable. Thanks to https://github.com/neophyl for the help with this! Print instructions I…
Need some extra 1x1 bins for the Sortimo system but the models I found online were not exactly the same as the originals and most importantly did not have the registration "feet" that keep the bins from moving on the box's internal grid.…
These models are reverse engineers of Sortimo "T-Boxx" bins. I have uploaded individual STLs for 1x1-4x4 boxes, I will probably upload up to 6x6 later, but the standard Prusa size printer can't even print a 4x4. They work well for one-off…
These rails will support and retain Sortimo T-BOXX G Storage cases in a purpose built cabinet by the recesses molded into the side of the cases. Models include spacers to simplify layout and allow maximum storage density while still being…
Inspired by albworkshop ( https://www.thingiverse.com/thing:3373564 ) To improve my OpenSCAD knowledge I found fun to reproduce sortimo boxes and offer a little customization. The feet are in the original post Using the customizer shows…
Boxes compatible with the Sortimo i-Boxx with room for 12mm labels. Angled surface for labels, easy to grab, and able to be printed without supports. Each box requires 4 of the feet to be printed and glued in place. Can be used without…
The main model in this upload is a lid insert for the L-Boxx mini. It lines up exactly with the baseplate here https://www.printables.com/model/275513-gridfinity-baseplate-for-bosch-sortimo-l-boxx-mini . This ensures that no small parts…
I need a divider for the Sortimo 1x1 bins as I had a lot of small items that needed less space then the orginal bins provided. Turns out that a vertical divider wouldn't work due to the design of the lid so I came up with these removable…
After printing BOSCH L-BOXX Stand from @S_P_A_X, I recognize that this L-BOXX Stand is only for the older BOSCH L-BOXX (until 2018). Thanks to inspiration by S_P_A_X https://www.thingiverse.com/thing:2097685 So I re-design this part for…
Rail system to mount Sortimo T-Boxxes. Inspired by watching the Tested video on Inside Adam Savage's Cave: The Tool Boxes Sortimo system, I bought 5 of my own. These boxes ROCK! I could not find any way to mount them, as in Adam's video,…
This is a solid shape that represents the inner available volume of an L-Boxx Mini. Can be used to make inserts.
A quick and easy way to add a label to Sortimo 1x1 bins. Just pressure fits into the bin and is easily removed if you want to change it around. Made this to compliment the 1x1 Insert Dividers I also made for the 1x1 bins. 1x1 Label Collar…
Hier einige druckbare Insetboxen für die Modellreihe 102 Generation 4. Deckelstyropor muss vorhanden sein. MfG
Sortimo L-Boxx wall mount
This is a size-accurate Sortimo T-Boxx grid. The blocks are designed to be glued together to create a bigger grid but maintain correct spacing. If you need other sizes please feel free to ask.
Printed and working in PLA for now. Will upgrade to ASA if it breaks.
Label Collars for the Bosch/Sortimo 1x1 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
All the insert boxes I've found online so far didn't fit the L-Boxx grid perfectly (especially the L-BOXX 102), so I made my own.
As a vehicle wrapper, I need my wrapping lettering tools every day. Since I still had a BOSCH L-Boxx 374 left, I threw away my old tool box. The L-Boxx offers enough space for all the tools you need. In my work I need different vinyl…
Label Collars for the Sortimo 1x2 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color coat the black Sortimo bins to add in organization. Collars are designed to lock into the divider slots.…
These are Sortimo T-Boxx compatible boxes for the dual-layer STB BES 31 G version. These are perfectly compatible with the stock Sortimo insert and boxes (see pictures). That said, they are designed to be more space efficient than the…
This is a Lid Mount for Sortimo L-Boxx to store 15 Wera Kraftform Kompakt Bits.
This is a compatible insert for the L-Boxx system in size 2x1 (104mm x 52mm). The height is 60mm (62mm incl. feet) which is the standard height for L-Boxx 102 inserts. The design has feet (which prevent the insert from sliding in the…
This mount allows you to store Sortimo Bosch L-Boxxes within an IKEA PAX. You can use the original holes within the PAX to fix the sliders. For a proper mount, you need 4 screws to hold one L-BOXX. I used the following parts: IKEA PAX…
As a vehicle wrapper, I need my wrapping lettering tools every day. Since I still had a BOSCH L-Boxx 374 left, I threw away my old tool box. The L-Boxx offers enough space for all the tools you need. In order to be able to store smaller…
Prusament PETG Prusa Orange 250°C Extruder, 85°C Bed Nozzle 0,4mm, but I set it to 0,38mm in S3D. There are two versions. (Check the comments to understand the problem) In short. If you put several grids next to each other, then there can…
Update: Added another IKEA Pax wardrobe with these rails and moved the outer mounting holes position with +10mm further to the outside for this one. The original ones sometimes lined up with the mounting holes of the Pax which was not…
I use the Sortimo L-Boxxes with the available insert boxes from Sortimo. To increase the amount of storage I created created this divider. I use double sided tape to secure them to the boxes. See also my other design for the slightly…
Label Collars for the Bosch/Sortimo 2x2 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
Label Collars for the Sortimo 2x2 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color coat the black Sortimo bins to aid in organization. Collars are designed to lock into the divider slots…
Label Collars for the Bosch/Sortimo 1x2 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
As far as I am aware, there are two Sortimo L-Boxxes for inset boxes. One is the i-BOXX 72 and the other is the L-BOXX 102. I was looking for some small boxes, but none of the models I found were suitable. Therefore, I created this model.…
Ich wollte ein Grid, das das original Muster im Boden der L-Boxx G4 abbildet und leicht und schnell zu drucken ist. Grundüberlageung ist, daß diese Grids auf den Boden diverser Schubladen oder Boxen geklebt werden und von dem her recht…
Bin divider for the Bosch/Sortimo 1x1 i-Boxx72 bins. Stacks into the 1x1 bins and provides a divider for small parts. Also has room for a 12mm label. Check out my other prints for the Bosch/Sortimo i-Boxx bins! 1x1 Label Collar…
A tool rack to store Sortimo T-Boxxes and tool on a pegboard
A parametrized H63 insert for Sortimo T-BOXX. Features Adjustable length, width and height via parameters Stackable if printed at less than 100% height Feet printed separately to remove the need for supports Source can be found here . You…
uploading my old design from thingiverse to Printables this is a modified version of the design I previously uploaded: https://www.thingiverse.com/thing:3000842 and is still fully compatible with: https://www.thingiverse.com/thing:2235462…
Label Collars for the Sortimo 2x3 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color coat the black Sortimo bins to aid in organization. Collars are designed to lock into the divider slots…
Sortimo L-Boxx wall mount with velcro mount ; 50mm velcro I recommend my second design..see Remix
The hex mount is designed hold the rip fence of the small 12V circular saw in the lid of the Sortimo/ L-Boxx. The holder is printed without suport and 15% infill. In the slicer file, the “bridge” has a higher infill (30%)
As a vehicle wrapper, I need my wrapping lettering tools every day. Since I still had a BOSCH L-Boxx 374 left, I threw away my old tool box. The L-Boxx offers enough space for all the tools you need. I need my cutter knife to cut foils.…
Background I broke down and bought a set of Bosch's L-Boxx and i-Boxx for managing a bunch of parts and tools. Bosch sells some injection-molded sorting boxes, but 1) they weren't a great collection of sizes; 2) I needed a lot more small…
Gedruckt mit PLA 4 Wandig bei 0, 28 linienbreite schön stabil petg sollte nicht zu schnell gedruckt werden da stringing auftauchen könnte
Label Collars for the Bosch/Sortimo 2x3 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
v2.1 added (Jan. 2025): Another rework of the design. Optimized the sizes a little bit. There is now one “end holder” which sits in the back of the iBoxx with a “hidden” storagebox underneath it. Then there will fit 8 6-bottle racks for…
Update 26.12.2025: Messgeräteeinlage und Vorlage zum selbst erstellen einer Werkzeugeinlage in STL und STP Format hinzugefügt / Add insert measuring tools and template to create your own tool insert in STP and STL format.…
This is a Spacer that fits in Sortimo Insetboxes IB 1x2, IB 1x3 and IB 1x4. If a TW 2x0 spacer is used, this Spacer can also be used in IB 2x2, 2x3 and so on. I created this model by using calipers and onshape, so its not a 100% acurate…
A quick change to the OpenSCAD file of pretenda to allow stackable modules. Print instructions Category: Tool Holders & Boxes Summary A quick change to the OpenSCAD file of pretenda to allow stackable modules.
T-BOXX compatible inserts with half the usual height (stack 2 together), that are optimised for 3D printing (consistent wall thickness). The pegs should be printed extra and glued in with some superglue. The grid spacing is 52.3mm.
Prusament PETG Prusa Orange 250°C Extruder, 85°C Bed Nozzle 0,4mm, but I set it to 0,38mm in S3D.
I use the Sortimo L-Boxxes with the available insert boxes from Sortimo. But I have too many big B3 boxes. So, I created these dividers. I use double sided tape to secure them to the boxes. There is a version for dividing the B3 box in…
I got inspired by the design from Shiftys_Woodwork (thing 4085402) which were not perfect in fit and finish and had a huge design flaw in my opinion. Small parts like m3 bolts and nuts were able to mix because the separators did not reach…
Label Collars for the Bosch/Sortimo 1x6 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
90mm height. Both corners are needed two times, the box “inner-triple” four times. Print with PLA 0,2-0,3 Layer height based on https://www.thingiverse.com/thing:3501175
I added a fillet to make it easier to grab the parts and increased the size of the top handle to create room for labels. You can download the foot.stp model file from the source model by Sorcerer. Thanks to @sorcerer_6727 for sharing the…
fits well into the original containers, see pictures. the big red one is an original sortimo container. By doing this you can double the capacity of a sortimo tray - at least for small items that's helpful.
The Sortimo 1x1 insert box with 4 compartments is perfect to store small parts efficient. The dispenser tool helps to select one compartment to get parts out very easy. The dispenser tool is flat enough to fit on top of the insert in the…
Maniglia di ricambio per cassette metalliche Sortimo. si assembla con due bulloni M4x20 testa tonda e due dadi M4 autobloccanti.
This is a Spacer that fits in Sortimo Insetboxes IB 2x2, IB 2x3 and IB 2x6. I created this model by using calipers and onshape, so its not a 100% acurate model but its pretty close to the original. I printed this with a lower layer height…
Shelf for Sortimo Inset Boxen for Multiboard (multiboard.io)
Divider boxes that fit inside the Sortimo T-BOXX A3 bins to give you even smaller compartments. They are half-height and three versions for single, double, and quad compartment bins.
This is meant to be printed in ABS. In conjunction with wood screws, this is able to hold the boxes on a wooden base.
This insertable bin is 2x2 units footprint, and one unit high. It's stackable, and compatible with Auer (tested), and might be compatible with more of the similar systems. Pictures show dual colour prints - the files attached do not have…
Turns out that if the parts are small enough, they can still escape the bins in the Sortimo carrier. I had an issue with BBs making it out of a 1x2 bins so designed a cap that fits snuggly into the bin but can still be removed easily.…
I was asked for my shown make from the original design by RichiH. So here is the lower “divider” with no additional segments in it. For the non solid bottom, just print without bottom & top layers.
I modified the install guides only to allow me to mount the rails flush and pass them through. I modified using a saw and chisel the ones kai created and decided to make my own because it turns out modifying 3d printed parts with a saw…
Für die Werkstatt wollte ich gerne einen Adapter, so dass man auf einer L-Boxx ein Brett (beispielsweise für eine bewegliche Ständerbohrmaschine oder für eine Kappsäge) montieren kann. Auf Rollen kann man dann in der Werkstatt die…
The spirit level holder consists of two individual holders. One holder for the bottom and one holder for the top. The two holders are simply clicked between stacked Sortimo / BOSCH L-Boxxes. The spirit level is then inserted and held in…
For a custom L-Boxx/Sortimo Box 136 Insert which a clever guy from aachen made, I designed boxes to fit in the corners of them, so they are not useless. There is a right one and a left one. You need two of each. Link to his ebay:…
Prusament PETG Prusa Orange 250°C Extruder, 85°C Bed Nozzle 0,4mm, but I set it to 0,38mm in S3D.
I’m a fan of the Sortimo Bosch L-BOXX® system, but unfortunately the insert trays are only designed for the smaller L-BOXX 102. Since I still have a larger L-BOXX 136 lying around, I created this extension level that allows me to use the…
This is an older mod/design of mine originally uploaded to Thinigverse. Figgured it could serve someone here as well. It's two versions, one where the dividing wall is flush with the top of the insert and one where it protrudes above the…
This template can be used to create your own inlay for a Sortimo L-Boxx. Diese Vorlage dient zum gestallten eigener einlagen für eine Sortimo L-Boxx.
