Klip hrudního popruhu, batoh Osprey
Náhrada za poškozený klip hrudního popruhu pro krosnu. Přerušení tisku pro navléknutí původního popruhu bez nutnosti šití.
- Downloads
- 40
- Likes
- 4
- Rating
- 5
Counting matching models…
Náhrada za poškozený klip hrudního popruhu pro krosnu. Přerušení tisku pro navléknutí původního popruhu bez nutnosti šití.
the battery clip on y Ospry Headlamp 600_Lumen broke. instead of sending it off for repair, I was able to print an exact replica. This battery holder clip is a direct replacement for the Osprey Headlamp-600 Lumen. I recommend using PETG…
This silencer is based on the Osprey 45k and was designed to be used on my 1911 R32 and holstered on my Swiss Arms Adapt-X, so the dimensions are definetly not accurate in relation to the RS one. Dimensions: 23 x 35.5 x 150mm The baffle…
The Bell Boeing V-22 Osprey is a tilt-rotor aircraft capable of taking off vertically and hovering like a helicopter, and pitching its rotors 90 degrees forward to fly like an aeroplane, currently in service with the USAF and JSDF. Pair…
This buckle can be used to attach any daypack to the front of the Osprey Farpoint 40 (by sewing additional straps onto the daypack), as only the Farpoint daypack is natively compatible with it. Many thanks to @herpderp_1457885 for the…
This is a replacement chest strap clip for Osprey backpacks. I made this for a friend, whose original snapped during adjustment. I redesigned it to be a little thicker to account for 3d printing not being as strong as injection parts.…
Version 2: Files with -v2 contain a slightly modified buckle with more space for the strap, which should work better when scaled down.
Replacement for the original handle on the pool robot. This breaks after a while.
I recomend lower print speeds because of the smaler parts.
Bell-Boeing V-22 Tiltrotor from: https://logic-wizard.art.coocan.jp/fms_e.htm More: https://en.wikipedia.org/wiki/Bell_Boeing_V-22_Osprey RC Bicopter:…
I wanted to clip my old backpack to the front harness of my new Farpoint 40 so I used one of the buckles as a template to design my own in Fusion360. Not 100% identical to original but seems to do the job. There's also a split model for…
A simple form fit bite valve cover for Osprey Hydraulics LT Reservoir. You can use any method to tie it down. I used an elastic band as that was handy.
On Osprey daypacks there is a small strap for the water bladder on both of the shoulder straps. This will attach to one of them to hold your AirPod pros for easy access.
This is a shorter version of the original. I've found that on my AEP, the suppressing performance is essentially the same, and the sorter suppressor is more maneuverable. The plug on the front is also shorter, to maximize the available…
Clip to fit the Gregory day pack, allowing me to attach my Osprey water bladder.
This is a fully 3D-printable replacement buckle set designed to work with both the male and female clip sides of the top lid strap on an Osprey 85 AG backpack (including Atmos and Aether series). It’s perfect for trail repairs, long-term…
Bell Boeing CV-22B Osprey Angle Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Replacement clasp and base designed for Osprey hydration packs. Pieces can be printed together as a set or individually to replace a missing piece. These parts might work with other hydration pack systems I just don't have any to compare…
Osprey themed wind spinner Needs 2 screws for the props or you can print ospreyPropCover_x2 for the same purpose Print rotors and engine parts in best resolution that you have, 0.12 spins way better than 0.20 Assembly requires some…
I made a tracer unit in the style of the Osprey suppressor which uses a small 7,4V LiPo battery and a couple of high brightness 5mm UV LED's to light up the tracer BB's as you are shooting them. The suppressor consists of 3 main parts,…
I designed this hook and oval “thing” to thoroughly dry out your Osprey hydraulics or similar hydration reservoir. To use, blow into the bite valve to clear out the hose and then dump the remaining water out of the reservoir. Insert the…
Inspired by https://www.thingiverse.com/thing:5929466. And it is easier to print! I just wanted to recreate the buckle Nozzle: 0.4 Supports: YES Layer: 0.12 or 0.2 Material: PLA
I work on a non profit open source research ship, R/V Falkor, and we have been mapping the Great Barrier Reef and Coral Sea. I've taken some of that mapping data and turned it into a .stl, and then turned it into a desk lamp/showpiece.…
A magnetic clip for Osprey water hose with 8 mm magnet.
V-22 Osprey Kit Card with sprues removed
A simple design. No supports needed. PLA will work just fine.
V22 Osprey wallart, fikles include both single piece version, and precut version for when you want a big piece on your wall. Scale acordingly to you bed size. There are also two thin pieces in the wing, near the rudder that should be…
Disclaimer: I have zero experience 3D modeling, so I just took files I liked and smashed them together. I took BanBot2's short dart barrel mod as a base, replaced the barrel with Toukejin's printed barrel w/ rifling, and then shoved it…
Even when it does not seems so at the first look it can be replaced without further damage to the bad. Printed from Prusa PC Blend with auto tree support. Seems to serve the purpose well.
Idea I use the lightweight Osprey packing cubes for storing my laundry during travel. I often had to look into many cubes to get the items I want, so it seemed appropriate to label them accordingly. Design Simply drew up a design in F360.…
OSP-26 Osprey BN Edition for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
This is a replacement buckle for (some) Osprey (and probably others, but only confirmed by me for an Osprey Talon) backpacks. This is replacing the buckle on the bottom of the shoulder straps. Made for 20mm wide straps. This part needs an…
Female Buckle for Osprey Fairpoint backpack. Printed with: - layer h: 0.2 mm; - fill: 25%; nozzle d: 0.4 mm
This is a small clip for your Osprey backpack so you can clip a water tube on your strap. I provided three different openings so you can chose wich one suits you best. I printed mine with PETG so it's a bit flexible.
Yeah, thats me! https://www.instagram.com/p/DIXOBvjglt4/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==
Dust cover for the drinking valve. TPU version with tie down loop, non-flex version with hole for own attachment means.
Replacement for the Osprey Exos Backpack (and likely other models) breast / upper belt connector. Unfortunatley it is possible to loose the breast belt since they are connected in a “button like” manner. After I couldn't find replacement…
The original clip on my Osprey broke, so I designed this new replacement part for the clip to hold the water hose for the Osprey Camelbak. The magnet hole is 12.5mm
Update 11/2/25: New V2 barrel inserts (second photo) have been added to the files. These allow you to fit one insert into each barrel. Making for a total of 8 usable barrels as compared to V1's 4 barrels. Easy print barrel inserts…
This style case is my final version of my Bic lighter case design. It has my trademark insignia on the inside. Lighters are held snugly but are not impossible to remove or insert.
Small-line art model of MV-22 Osprey Side Profile
This replaces your old 8 dart cylinder with a Collet Barrel Insert that allows you to gain a substantial boost in performance depending on your build! You'll need to remove all old cylinder internals and you'll need an O-Ring for the…
I've been in need of a way to block the rain gauge in the winter on my WS-2900 so ice/snow doesn't get stuck in it in the winter. This should do the trick :) EDIT 9/16/2019 Made the inside fully solid Print Settings Printer Brand: Prusa…
This is a mounting platform and sign bracket for the V-22 OSPREY kit card by Nakozen available at h ttps://www.printables.com/prints/143164. These parts are designed to attach to a 3UDC pivot arm so that you can present this model…
Not sure why there isn't a standard, but this solved a problem for me. Platypus bladders don't have a taste problem, but I couldn't find a way to attach in an Osprey bag.
This version cuts the entire back of the can off so it can be printed separately, much like the front. Added an alignment groove to the top of the can so both pieces can be printed upright. Swapped threads to the 14mm CCW from AViera, but…
This is an adapter for Osprey backpack with HydraClip and Decathlon Kiprun water bladder. It is a simple remix of the model kindly shared by the creator Matthias_282902. Kudos to him.
Small covers that attach to the handle which would protect the fabric when the bag is on its back from wear and tear. The tears are already visible in the pictures. I printed as in the screenshot with supports. Just mirror the model on X…
Print multiple and stack for custom spacer sizing. Requires some disassembly to install. I run 2 spacers but there is room for more. Experiment to find what works best with your setup. It was discovered that the end cap may be solvent…
A simple remix of the original Osprey Hydraulics Bit Valve Cover to be a better fit with new style valve which has a lever on it. No supports needed if printed from base. I used Prusament PLA.
Tlač bez podpory, odporúčam Spectrum S - flex (pružný materiál), s PLA, PETG… to neskúšajte nie je to ono.
I've also shown the cross setion of the model and the way that the strap should go through it you will need to take the clip off before though.
This is a replacement part for Osprey backpacks. The backpack is a solid product, but the buckle gives up pretty early and I was not able to find one that fits and holds. I have tried to make this work with PLA and designed around its…
Remixed from w00h's great label: https://www.printables.com/model/906013-osprey-packing-cube-labels Label for Osprey packing cubes. To change the text just open up the Fusion 360 file and right click on the sketch named “Text”, then right…
osprey logo that lookslike a sunset behind mountains when placed on a back surface. observe the layers in your slicer. from bottem to top the layers are: purple dark orange orange yellow red white l
Seatbelt mounts that fit the maple light and flyfish osprey antennas (Two of the cheapest lollipop style antennas) to fulfill race directors wishes. Print out of TPU, fine setting with tree supports on.
▶ More builds on my channel: youtube.com/@fpv-geek Yesterday I tore off both original DJI O3 antennas flying a bando. So I switched to a FlyFishRC Osprey 40 mm stubby and designed this TPU mount for my TBS Source One V6. The antenna sits…
Bell Boeing CV-22B Osprey Angle Wall Art Silhouette model. Adjustable size. I accept model suggestions.
This style case is my final version of my Bic lighter case design. It has my trademark insignia on the inside. Lighters are held snugly but are not impossible to remove or insert.
Version 2: Files with -v2 contain a slightly modified buckle with more space for the strap, which should work better when scaled down.
Small covers that attach to the handle which would protect the fabric when the bag is on its back from wear and tear. The tears are already visible in the pictures. I printed as in the screenshot with supports. Just mirror the model on X…
Idea I use the lightweight Osprey packing cubes for storing my laundry during travel. I often had to look into many cubes to get the items I want, so it seemed appropriate to label them accordingly. Design Simply drew up a design in F360.…
M-Bow (Mini Bow) The Osprey is the toy bow I always wanted as a child. With its huge plunger tube and real bow action, it has tons of potential for fun and modification. The goal of this kit was to take advantage of that potential and…
This style case is my final version of my Bic lighter case design. It has my trademark insignia on the inside. Lighters are held snugly but are not impossible to remove or insert.