76 models
Hello, I created in Fusion360 a stand to fit a 5,8cm x 3,8cm squared timber. This project is used to support plants. The footprint is 20cm x 20cm. The stand was printed on the original Prusa MK4 with Extrudr XPETG Matt. (High Infill and…
Print approx. €18.05–€22.06 excl. taxPreliminary estimate for PETGSource material: PET
This is a lenshood for an Olympus M.Zuiko 25mm lens or any lens were a LH-49B lenshood would fit on. This give you the squared look of a leica or fuji camera, for a fraction of the cost ;)
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
squared polygon planter with polygon plate modern minimalist planter design with polygon pattern that sits elevated in a polygon style plate ~full dimensions in mm > x: 115 · y: 115 · z: 125 included are the profiles at full size and 80%…
I wanted to speed up the print time and save some material so I made the hex holes bigger.
I was impressed by the concept of RostaP 's storage wall. It is super versatile and it is extremly easy to design your own addons. However, I found the actural panel design a bit to unspectacular. So I came up with the idea to repeat the…
This squared O ring is 1mm thick so the height can be customized to your needs!
3D MODEL DESCRIPTION This is a tender and cuddle Perry The Platypus model with overall dimensions: 40mm x 40mm x 100 mm (l x b x h). • The file contains separated parts (for single extruder printer) and the full model if you have a…
Squared off corner shelf for light weight figures/frames
The Japandi Kitchen Roll Holder combines simplicity and elegance, drawing from both Japanese and Scandinavian design influences. Its rounded structure and subtle details make it a perfect addition to any modern kitchen. Designed to hold…
During the development of the Cooler Master MasterBox NR200P , we created several variants for the case feet design. Following numerous iterations, the launch design was chosen, but we thought "why not share the iterations with our…
Love this model. The ONLY thing, I had to import it into Blender and shrink the necklace hole a hair (made sure not to over shrink it) and add a couple layers to the top, otherwise it doesn't print enough to close the hole. Even printing…
This is a tender and cuddle Mickey Mouse model with overall dimensions: 40mm x 40mm x 100 mm (l x b x h). • The file contains separated parts (for single extruder printer) and the full model if you have a multicolor setup. • Minimum scale…
Travelbox for Squared Pieces of Ultracompact set CastleChess ( https://www.prusaprinters.org/de/prints/28518-ultracompact-set-castlechess ) by Kagarov | Printables.com The lid fits a bit tight but with use it will probably be better
This is a simple squared funnel. Print with large opening on the table, no support Category: Kitchen & Dining
UPDATE 13.1.2022: added bigger version, no support needed, better hook stability When: when you have metal board with squared holes when you want to hang on it any of your prints especially when your print has its back side printed as…
The Japandi Utensil Holder combines simplicity and functionality, drawing from the clean lines of Japandi design—a blend of Japanese minimalism and Scandinavian warmth. Its squared form and vertical ridges add textual interest and…
Tested with 38 and 42mm version requires support to print Leave a like, if you like it!
A squared-off remix of KingDeeddee's Bk1s/2s talon magwell sleeve . Instructions to assemble are identical to the original. Print magwell base facing down, with supports.
This is a tender and cuddle Daisy Duck model with overall dimensions: 40mm x 40mm x 100 mm (l x b x h). • The file contains separated parts (for single extruder printer) and the full model if you have a multicolor setup. • Minimum scale…
Printed by BFB IeC Refurbished - 4 color printer with 4 ways Flux Capacitor Category: Signs & Logos
A Case to support the Up2 Pro (Up Squared Pro) Requires 30mm stand-offs to attach board Printed on Creality Ender-7 (Running Klipper)
My base case was printed from ABS and the lid is printed from PLA. The ABS gives the case impact resistance and strength, but the PLA allows the lid to be more rigid and snap into place.
3D MODEL DESCRIPTION This is the model of a squared pokeball. • The file contains separated parts (for single extruder printer) and the full model if you have a multicolor setup. • Minimum scale should be 80%. • Base is available in two…
The Japandi Spoon Holder blends Japanese minimalism with Scandinavian functionality, characterized by its clean lines and simple form. This elegant design is both practical and aesthetically pleasing, making it a cherished addition to any…
Simple 1.0mm hinge shims for 3.0 inch square corner door hinges. These are designed to be added when screwing in hinges, not slide-in. Simply scale these in your slicer for the desired shim thickness. Printing: I printed in black PLA with…
3D MODEL DESCRIPTION This is a tender and cuddle Homer Simpson model with overall dimensions: 40mm x 40mm x 100 mm (l x b x h). • The file contains separated parts (for single extruder printer) and the full model if you have a multicolor…
Just a simple suqared coaster. Can be printed with 0% infill. Print settings : Printer model : Creality K1C Layer height : 0.2mm Infill density : 5% Supports : No Time to print : 22m
Has two holes on the side for wifi-antenna mounting (images will follow). Enough space on top, to fit a 2.5" SSD with stripped housing and all it's cables. My First thing to publish. Really easy to print. Support is mostly not needed. You…
3D MODEL DESCRIPTION This is the Among Us character with overall dimensions: 40mm x 40mm x 100 mm (l x b x h). • The file contains separated parts (for single extruder printer) and the full model if you have a multicolor setup. • Minimum…
This is a tender and cuddle Oswald model with overall dimensions: 40mm x 40mm x 100 mm (l x b x h). • The file contains separated parts (for single extruder printer) and the full model if you have a multicolor setup. • Minimum scale…
“ Slant Squared ” is my take on a modern, simple desk light. This model is also only 2 parts and is very quick and easy to print! Model is 74.4mm x 74.4mm x 110mm and utilizes the Bambu Lab LED Kit 001 . Other LED puck lights with 60mm…
This is a big squared vase for multiple small plants or a plant that needs additional space for its roots. It measures 120mm x 120mm x 100mm.
Two squared-ish hooks for Skadis. Honestly didn't even notice there already was one in the original until I went to upload these.
Printing Instructions This model needs to be printed at 0.1mm layer height (any typical nozzle diameter should be fine) and should be printed with a 60 degree infill direction, and a 120 degree bridge direction. This gives your hinges the…
Its a squared pot already emptied, with waves in 4 faces. 2versions available, one with a hook for a wall, another without Recomendation: wall thickness: 2 layer heightt: 0,24mm (The model in the photo was impresed in a ender 3 neo.)
Sybotanica sell very nice clear squarish plant pots starting at a tiny 50mm square for seedlings. They also sell clear pot saucers but these don't come with the bundles they sell. This is designed to use with the smallest 50mm square pot…
contains : - solar light holder - wind screen locker - freestanding awning arms locker - freestanding awning stopper Uses M5 screws, printed in PETG F3d file included for modding
A squared Planter with Grid webbing detail with a drip tray. Planter dimensions: 125mm x 115mm x 125mm Ironing is active
English description (German description below) Stand for squared timber - The dimensions of the squared timber are 24x48mm. - Two versions available: High (55mm mounting) and Low (40mm mounting). - The bottom of the low version is open,…
Holders for a square pegboard with a robust base, created as a linked asset in Blender so it can be reused for other square pegboard holders. Prints in 8 minutes with default infill and default support. Included: Regular hook Knife holder…
I needed a bottle holder for my excavator to survive the summer heat (stay hydrated, folks!). Maybe you find this piece handy, too?! Just print it and mount it to a squared timber or square tubing with zip ties and you're good to go! You…
Use your APS-C Sony E-mount body to capture the largest square format images most full-frame lenses are almost certain to cover -- as shown in the last three images above. This is a simple four-part adapter for Leica M to Sony E -- except…
You can print it in vase mode but if you want it watertight i recommend that you print it with 2 or 3 peremiters If you are using prusa slicer and you dont know to to put it in vase mode then her is a quick tutorial First you need to go…
This is a support to mount a 8mm square camera module, such as the IMX258, popular on AliExpress, on the nozzle of the Prusa MK3S+. Choose between the "Closer" or "Farther" version, depending on the distance you prefer to keep from the…
Entry for a contest. Vase designed by “lofting” a few square and circle sketches.
Original file source cannot be located. I used this vase to display the Calla Lilly's that Mark created. Printed with SUNSENKJ Tri Colors Silk PLA (Gold+Blue+Fuchsia).
My wife needed a framework where to clip knitted tissues to be installed on a wood tableau. Idea is to print twice and use the two instances together
Props to the author for a nice spool guide. I made the rear main arm a little less rounded to let me print it without supports. Also modified the gear assembly with the lateral long arm so that I could adjust the angle of the long arm to…
Introducing the Slant Squared Modern Planter - a simple 3-part, elegant planter for your home! The i nner pot fits snugly into the outer base , allowing excess water to collect neatly in the drip tray below — keeping your surfaces dry and…
Din Rail Mount for Up2 Pro (Up Squared Pro) Designed to use 30mm stand offs to attach board Printer: ender-7
This is 3D model of KASE universal magnetic lens filter. While planing how to make case for it I decided I have to make this model first so I can easily experiment with various case ideas. KASE produces set of various filters of the same…
Built around the bambulabs MH001 led lamp kit (compatible substitute: https://a.co/d/dfQSn6q ) this desktop lamp or night light is intended as a follow up to my previous lantern (…
I made this for my girlfriend. I can't really say, what these are, but maybe someone needs it. The square part of the glitter container is 29.2mm, and the round lid is 28,6mm in diameter. Holds up to 15 of these containers :)
This is a TPU case for a squared shaped toolkit. One Model has fixing points. Wall thickness is 1.5 mm. Printparameters: TPU D58 shore Layer hight 0.16 or 0.2 Infill: 18% but can be more Speed depending on printer 40 to 50 mm/s ish.
The wrench can be printed without support material when put upright standing on the square hole. For better adhesion print with a brim of 5 – 10 mm . I drew it for opening the hatch of my fuse box.
Din Rail Mount for Up2 (Up squared) Designed to use 30mm stand offs to attach board printer: ender-7
just print the last meter for decoration scale to your need and volum FDM up to 0,3mm color as it mixes up HAVE Fun
Its really big I would scale it down a bit since the cigarette doesnt hold in the groove IMPORTANT: do NOT print it with PLA since the hot ember of the cigarette will slightly melt the ashtray so its not a model for long lasting but it…
For candles that are less than 100mm of width. Print in place. Enjoy!
cool mini checkerboard with additional functions such as point-keeping and handles. Practically any 6 objects that fit in each of the side's cylindrical holes can be used for point-keeping! Has a storage space for pieces and anything…
The original model used a metric squared metal tube. I modified the parts with the inner cavity to fit ½ OD squared metal tubes found in North American hardware stores. I kept the 0.4mm tolerance the original model had, so it's a loose…
Knob for M6 Squared off Bolt - Tall and Wide
This 3D model can be both a piece of jewelry and keychain. It can be scaled to any desidered size
the orginal is not quite the right size to fit Spot so I extended it so it does fit. both files are the same,just diferent format. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20…
I wanted to store my G2 yoyos in their boxes, stack them, and have easy reachable access. Here in case other folks want that too.
This is inspired by @wafflecart's But instead of squares of sizes 1 and 2, I want to use squares of different sizes to form a rectangle. This is called a squared rectangle . The following is the smallest design found on the internet. i i…
this is a a vary squared castle use at as you will. This castle have 4 windows and a thrown room in middle.
I made something for my squared rain gutter. Printed in PTEG 20%infill and worked pretty well. The rain gutter has a dimension of 50mmx50mm and it fits perfectly fine.
Bring realistic road play to life with this set of 4 freestanding road service traffic signs 🚗🛣, perfect for toy cars, road layouts, sensory play, classrooms, and imaginative small-world setups. Each traffic sign features a clear,…
Up2 Case (Up squared) with din rail mount and 2.5 ssd bracket Printed: prusa xl, nozzle 0.6, layer height 0.2 Uses 2.5x10mm screws with nuts for assembly
CraftRig | Chamfered 7° Cradle for Logitech Craft Designed a clean, geometric 7° cradle for the Logitech Craft . This one goes for a sleek, blocky look with sharp chamfers keeping full access to the top crown dial. It uses a 2-piece split…
Printing Instructions This model needs to be printed at 0.1mm layer height (any typical nozzle diameter should be fine) and should be printed with a 60 degree infill direction, and a 120 degree bridge direction. This gives your hinges the…
