619 models
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Toothpaste Tube Squeezer made by "My 3d Prints" This is a remix of Toothpaste Tube Ratchet Squeezer by Jakub_Matula
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This simple and efficient 3D-printed toothpaste squeezer 🦷✨ is designed to help you squeeze out every last bit of toothpaste with ease! Features: ✔ Super Fast Print – Ready in just 12 minutes without calibration! ⏳🔥 ✔ No Hassle – No need…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Overview Toothpaste squeezer to help get that last bit of toothpaste out of the tube. I've personally printed a couple for around the house. I've even had one get warped after going through the clothes dryer but it still gets the job…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Simple remix of @spidersky1489 toothpaste squeezer to open up the hole a bit to allow it to hang and added another slot to thread the tube back to keep it from slipping out while hanging. Added bonus of the double slot is it keeps the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Check my newest version of this squeezer https://www.printables.com/model/1832705-ratchet-toothpaste-tube-squeezer Features Fits larger tubes More comfortable to use Much easier to load Print instructions Print settings : 0.20mm…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Toothpaste squeezer for your almost empty toothpaste tubes. Slide your tube in the slot and turn the knob. Print as is without supports.
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
Ultra minimalist toothpaste squeezer design that's plenty strong! Works great for other things like facewash, lotion, etc. Measure the width of your tube at the end to make sure you choose the right size (there are 4 to choose from…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Another simple but elegant toothpaste squeezer ;-) Print Instructions Parts are oriented in the correct position Filament PETG (PLA maybe not) Nozzle diameter : 0.40 mm Default 0.20mm QUALITY PrusaSlicer Print Settings Perimeters : 3 No…
Print approx. €2.34–€2.87 excl. taxPreliminary estimate for PETGSource material: PET
A funny toothpaste squeezer in mouth form that makes sure you get all the toothpaste out of the tube without wasting any. Print instructions Easy to print. I decided to print it in PLA with infill 50%.
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
You want to get the last bit out of your toothpaste tube without any effort. With this model, that's no problem anymore. Happy printing! Recommended print settings: Nozzle: 0.4 Layers: 0.2 No support Adjust the size of the model to fit…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
This s a toothpaste squeezer remake from https://www.printables.com/model/26897-toothpaste-squeezer. A pair of strips was added to the original design to increase the squeezing ability of the model. A sample GOCDE file is attached for…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
Add a touch of Star Wars charm to your bathroom with our adorable Grogu toothpaste squeezer! This cute and functional accessory is shaped like everyone's favorite little green Jedi, making your daily dental routine a delightful…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
english There are so many tube squeezers out there, but I have never seen the slot angled on any of them. I find that the angled slot allows the tube to be pushed out directly with the printed part. Inspired by the most diverse squeezers…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Remix of @TinkrMakr model to be a little bit more hand charming. I beveled the edges to make it feel better.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Please like and follow and post your makes. Use care. This looks like a knife but there is no sharp edge. The tip can poke so not for small kids. Use in the home. I made this goofy KA-BAR knife toy, but I like practical prints. So I…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
This is a simple remix of model created by TinkrMakr I used Blender to add bevels around all the outer edges of the Squeezer.
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
A while ago, I made a toothpaste squeezer by adding a pair of lips to the design from Spidersky1489. It works fine. Well, in terms of squeezing hard. By doing so, I created a problem. Owing to the very small gap to facilitate the squeezer…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
It's a eyedrop squeezer for elderly person or person with arthritis. It's inspire by existing one that could be found in any pharmacy ( in Canada). At the local pharmacy, they didn't have the right squeezer for the type of bottle showed…
Print approx. €1.57–€1.91 excl. taxPreliminary estimate for one variant
Over-engineered, and quite overkill (complexity/material) tube squeezer. Also made in freecad, by someone that never really made CAD models before. note : please use the -slicer.3mf files as they provide the correct setup (with seam…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Vymačkávač masti, krému, barvy, ... z tuby. Squeezer for ointment, cream, paint, ... from the tube.
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
FR Redimensionnable dans votre slicer. Imprimer dans un matériau compatible contact alimentaire (petg – pp ...). Vérifiez la fiche constructeur du filament ou mieux la fiche de toxicité. EN Resizable in your slicer. Print using a…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
I saw some of the toothpaste tube squeezers and thought there's room to improve. So here's brief description of this ratchet toothpaste tube squeezer: ratchet mechanism ensures the tube doesn't unwind no supports just 4 parts which clicks…
Get every last drop of toothpaste out of the tube! The toothpaste squeezer grabs the toothpaste tube between the rollers. Turning the wheel will drive the gears and squeeze the toothpaste tube. Assembles without tools with a snap fit to…
I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications and I think now works really well. Thank you @Luke's 3D for the original design! I've printed this in Prusament PETG with…
This is a fun fidget toy that you can squish and squeeze. Make this with PLA. All the parts snap together and don't require any glue, but if you want the parts to be even more securely connected, you can still glue the Squeezer Cap to the…
With this practical cat food pouch squeezer , you can get the very last bit out of every cat food pouch — cleanly, easily, and without sticky fingers. Short on Youtube: Wet cat food pouches often leave a surprising amount of food behind.…
Minecraft sword converted into a toothpaste or cream squeezer. Choose from 12 variants: four styles with either flat or pixelated texture top, original or smoothed corners/edges, each in three slit thickness options: 1mm, 1.5mm or 2mm.…
Tired of wasting wet cat food left inside sachets? Cat Food Squeezer is a simple, practical, and fully 3D printable tool designed to help you extract 100% of the food from cat food pouches — quickly, cleanly, and without messy hands. A…
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any. No Supports! Just a few grams! _______________________________ I added an f3d file for anyone out there who…
Inspired by sns13s toothpaste tube squeezer on Thingiverse, I created my own version of a tube sqeezer which is more sturdy and easy printable. I liked the exlicit lock of sns13s design (much better and more reliable than printed ratchet…
Can easily be pulled out if you are done with your condiments. No need for unraveling the whole tube again.
Comes in four sizes: 44.5mm slit 55.5mm slit 65.5mm slit 75.5mm slit Printed in PLA with 40% gyroid infill. Hook the bottom of the tube in a Z-shape through the slit to ensure the grip.
Reuploaded from Thingiverse Made by ottenjr Summary Printed in 3 parts. Cap can be securely pressed or glued onto shaft. I advise printing as a solid object. Should be wide enough to accommodate all toothpaste tubes while comfortably…
Update: another improvement of the design for stronger prints (Feb 07 2026). See the pictures for the printing orientations I did not like what I had downloaded and decided to design my own tooth paste squeezer. There are two pieces, the…
I lenghtened the holder by 8mm in order to accommodate wider tubes. Original Description from @ ScrapyCoco Description PDF I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications…
this toothpaste squeezer is very easy to use and print. The design is very delicate. When the knob is rotated, it will jam gently and make a clicking sound to ensure that the toothpaste tube rolled in will not loosen. Suitable for both…
I loved the concept behind Luke's 3D's original model but it didn't fit my daughter's toothpaste. I also found the model quite hard to assemble as the tolerances were tight and there was little to no horizontal expansion (elephant's foot)…
A simple printable tool to better empty (metal) tubes like tomato paste, mustard and co. Version 2.0 (2023-11-21): I have recreated the " Tubeentleerer " by Boomi and slightly reworked the design, so the dimensions are very similar to the…
Cat food pouches can be frustratingly hard to empty. This cute squeezer is here to save the day and do so in style! Made for: Felix brand pouches Slot dimensions: 95 mm x 2.2 mm Print time: ~1 hour Printer used: Creality Ender 3 v2…
A practical little print that presses your toothpaste (or any tube) from the bottom up, squeezing out every last drop. Makes a perfect small gift for friends and family. Toss a few in a gift basket, print a handful for the holidays, or…
toothpaste squeezer, thanks to which it will always be possible to squeeze out toothpaste easily.
Mine kept shearing and breaking apart in use - so I made the inside of the components with gears solid - this seemed to make it stronger. I printed with 20% infill.
Layer Height: 0.2mm Nozzle Size: 0.4mm Infill: 10% Printer: Ender 3 V2 Filament: 1.75mm Tangerine Orange Food Safe PLA https://filaments.ca/products/true-food-safe-pla-tangerine-orange-1-75mm?_pos=4&_sid=1dfbfef33&_ss=r
A toothpaste holder that holds the tube vertically and allows you to squeeze its content. Between the bottom cap and the central cage, you need to fit two springs to maintain tension. Then, you can glue the bottom cap to hold it in place.…
This is a simple Totoro-themed toothpaste squeezer. The opening is 60.62mm wide. The model is 117mm wide, 70mm tall, and 4.5mm deep. Add a couple extra walls to print the design faster (and for added rigidity). This is based the opening…
If you do not know what it is used for, then you probably don't need it :).
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
Update Improved tolerance for thicker tube edges Introduction My neighbor wanted one, so I designed it. No moving parts means no chance to break. Hope you like it. Print Settings Print in default orientation. No support needed
Want a squeezer that is simple, sits flat and doesn't distort the empty end of the tube? Here's your answer. Designed for a toothpaste tube that is approximately 54 mm wide. Scale the part in the X dimension to fit your custom tube. This…
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
This is a remix of https://www.thingiverse.com/thing:1147252 because it was very wide. My remix is 55mm wide exactly what I need for all of the toothpastes. Support You can support me by liking and downloading my projects or you can…
This is a modified key squeezer for hand creams in metallic tubes. I needed a shorter and especially narrower gap. Several sizes are provided together with the original ones. I can create additional dimensions upon request.
Toothpaste extruder with suction cup support base - Exprimidor de pasta de diente con base apta para ventosas
I created this assistive device to hold treat tubes! If you have any difficulty holding and squeezing the smooth thin tubes of cat treat paste - this device gives a good gripping point and applies even pressure to help you squeeze out…
Material: PLA+ Druckereinstellung: Layerhöhe 0,16 mm / Infill 80 % / Support Tree Print in place Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein Like würde ich mich freuen. Good luck…
I found that other toothpaste dispensers on Thingiverse required assembly or were a bit clunky in their design, especially around the part where you turn the cylinder in the middle and various locking mechanisms. Others didn't even…
Main filament should be PETG (for strength). The secondary ones can be anything, I used white and black PLA. No worries, they won't separate, the secondary components (eyes, whiskers, nose) will hold firmly in the main part. I printed the…
REVISED 10/15/26: I updated the models to remove the corners. I was still able to print them without supports. ________________________________________________________________________________________________________________________ Simple…
To use line up the slot on the shell and nut and slide the end of a tube so the end slightly sticks out of the bolt. Then untighten the nut, slide the bolt out about 1 mm and rotate it to squeeze the tube. To lock it in place slide the…
A mechanical tube squeezer to print yourself. It works not only for the plastic toothpaste tubes but also for metallic ones, like for mustard. Some of the parts have to be printed with ASA or similar material to achieve the required…
Remix of Ratchet toothpaste tube squeezer by Luke's 3D. Everything is the same except for: It can now fit up to a 65mm wide tube Removed watermark Increased tolerance on axle so it fits better (may need a tiny bit of sanding)
This cat food squeezer makes pouch dispensing easier and cleaner. It features an open edge for half-portion servings and a larger size for improved grip and comfort. I’ve tested it using PETG material, which is ideal for easy cleaning and…
Yet another tube squeezer designed in CadQuery and fully parametric/customizable for custom sized tube widths. CadQuery is a type of CodeCAD and is similar to OpenSCAD and is based in python. I have included several widths that should…
In Fusion360, specify your wished slot height (width of the tube + tolerance) in the “wished_slot_height” parameter and the model will adjust to your needs. The minimal height is 13mm and it is automatically enforced. This model…
Modified the original model with the following changes: Elongated model to support toothpaste tubes up to 60mm wide Added stand to hold tube upright once it's short enough Added “fins” to help to squeeze the toothpaste more gradually for…
Soft cat food is sold in many places (Europe) in small soft squeezable pouches and just like toothpaste I needed some help it getting out that last little bit! I tweaked an toothpaste holder to a somewhat larger size.
Shortened 9mm to better match toothpaste tubes common where I live. Now fits tubes up to 60mm wide. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Notes: Translucent blue printed in…
Toothbrush Squeezer – Innovative Solution for Optimizing Toothpaste Use Introducing the Toothbrush Squeezer, a meticulously engineered accessory designed to maximize toothpaste utilization with precision and style. This model combines…
A remix of a simple toothpaste squeezer, with some hex pattern added to make it a little less boring.
The original by Luke's 3D was well received, but despite the gorgeous knurling, little fingers had difficulty turning the small handle at the base to twist it (especially when already wet!) This alternative handle is a direct swap-in,…
What makes it special I made this one for the small toothpaste tubes that always seem to run out on a trip. The big version works for a normal tube at home, but this travel version is sized for the mini tubes I actually pack. I included…
Works on most toothpaste tubes. If the slot is too small, fold a piece of sand paper in half and sand the inside. If that is not enough, use a piece of paper to shim the sand paper wider (put a piece or two in-between the fold of the…
My mother asked for help with her eye drops, as her arthritis made it difficult to use. KuroiZubon 's original model was nice, but didn't fit my bottle. First time designing print in place hinges, so I'm not sure how long they will last.…
Designed to be functional and assemble without glue to use every bit of toothpaste that may be left Print instructions Everything was designed to be abel to print easily and to also assemble easily and be functional without glue although…
A rubber band needs to be placed in the grooves around the sides of the fidget and acts as the spring that makes this toy work. Stiffer bands will make it feel snappier while stretchier bands will make it feel squishier.
Einfache Modifikation eines Zahnpasterausdrückers. Viel Spaß beim drucken. Material Empfehlung : PETG 100% Infill für mehr Stabilität Druckzeit ca 27min.
As most of these designs are too narrow for AUS tubes, I had to make my own. There are no flexing parts that will break over time, the key is held in place by the torque from the tube wanting to unwind. This makes it grip more and hold…
Printed in 3 parts. Cap can be securely pressed or glued onto shaft. I advise printing as a solid object.
A simple and effective tool for squeezing toothpaste tubes so that nothing is left inside. Just slide it onto the end of the tube and push the contents forward evenly and cleanly. It also works perfectly with other soft tubes such as…
I really liked the toothpaste squeezer but found the body to be uncomfortable to hold and prone to cracking if squeezed too hard. This body is more enclosed, making it much stiffer and comfortable. It is also about 1mm taller for better…
Toothpaste squeezer with snap mechanism
squeezes your tube and for metal tubes (food) also folds them nicely
Extract every last drop of toothpaste out of the tube with this tooth shaped tube squeezer! Simply put the end of your toothpaste tube through the long slot, bend it slightly and drag it through the slot to push the remaining toothpaste…
Most "tube squeezer" designs are based on forcing the tube through a fixed slot. This is either achieved by manually cramming the tube through a slotted novelty-shaped plastic toy or by using a flimsy rotating key in a feeble attempt to…
This is not my Model! Just bringing it from Thingiverse! https://www.thingiverse.com/thing:2638683 Original Description from maker "iomaa": Juice squeezer . Designed to fit into a cup or a soup container.
I printed it on Ender 3 S1 Plus using PLA and it looked great. Infill: 10% Support: No I ironed the top layer If you have suggestions write in the comments.
I has been printed this with brim and no supports.
A simple toothpaste squeezer that fits the toothpaste perfectly.
Improved Ratchet Toothpaste Tube Squeezer Features Easy to print and assemble Much easier to load & unload The toothpaste tube can stand upright If you like this model, please, take the time to leave a make or a comment! Assembly Thanks…
Tooth Paste Squeezer - Frog Vytlačovač zubní pasty - Žába
All parts are in the orientation needed to print. Using a brim for the roller would be recommended. Light sanding may be needed for fitting everything together depending on the accuracy of your printer.
This is a simple sauce bag squeezer. Its perfect if you also run out of ketchup or mayonnaise like me. I printed at 15% infill and it took about 10 minutes. I used PLA, but I think other filaments will work, besides TPU. If you have any…
I originally downloaded and printed Luke's 3D version of this, but couldn't get my toothpaste tube to fit into the slot so I widened it. Then I discovered Lloyd Keays version that has the screw on end instead of the pinch end. So I…
I liked this model but wanted a bit of a different mechanism to hold it together so I reworked it with a threaded shaft and nut. I also merged the shaft+ratchet+handle together into one single part. I printed it on an mk3s with a 0.6mm…
