3,542 models
T34-85 USSR tank. The scale is 1:100. Only 2 parts. T-34-85 - the military designation of the latest modification of the Soviet medium tank T-34 with an 85-mm caliber gun. Adopted by the Red Army by GKO Decree No. 5021 of January 23,…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
a minimal case for a HC-SR04 sensor, fits without screwing.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
Nice and detailed wall art silhouette of a Dodge Challenger SRT. Adjustable size. I accept suggestions for new models.
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Wer kennt es nicht, da wird ein Loch mit einer Lochsäge vorbereitet und die Hohlwanddose hält, weil das Loch etwas größer ist. Dafür gibt es Ausgleichsringe wie diesen. Einfach darüber stülpen und schon wäre ein Problem gelöst.…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
[EN] Set of heart-shaped cut-outs for making heart-shaped one-dish cakes. PLA is fully sufficient for printing. For hygiene reasons, it would be preferable to always use a new set, however, in case of repeated use, cleaning in the…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Bracket for a Wera screwdriver. Fits on a IKEA Skadis Board. Base on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 Inbus 1,5 Screwdriver and Inbus 2,5 Screwdriver You can find the whole IKEA Skadis…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Vertical Wall mount for LEGO Technic Porsche 911 RSR #42096 (Spoiler UP), designed to used with Large Command Velcro adhesive strips Taking the 2 Black skid pads at the bottom helps it to sit closer to the wall You can move the stickered…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
EN: Heart Dice 🎲 (Support-Free) ❌ Looking for a way to bring a little love to your game nights? This original die replaces traditional pips with elegant hearts . It is the perfect small gift, decoration, or a functional accessory for your…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Ich habe hier eine Wandhalterung für Lego Porsche 911 RSR 42096 erstellt. Das Modell ist etwas geneigt und lässt sich drehen. Ich habe 4x Schrauben 4,5 x 50 verwendet. Es sieht aus als wenn er schwebt. I have created a wall mount for Lego…
Print approx. €24.27–€29.66 excl. taxPreliminary estimate for PETGSource material: PET
This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
In Anlehnung an mein Modell " Abdeckung Heizungsrohr/ Cover heating pipe " habe ich diese neue Version konstruiert. Das Modell sieht nun etwas gefälliger aus und ist für verschiedene Rohrdurchmesser erhältlich. Es werden keine Schrauben…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
One of my first practical models. I printed from PETG and it has worked perfectly for more than two years. Uploaded model of windshield is without picture of the biker. For assembly you need (windshield with the holders) 2x Allen screw M6…
Print approx. €15.71–€19.20 excl. taxPreliminary estimate for PETGSource material: PET
PLA prusa or creality Printer - Mini+ first layer 213°C the others 203-5°C You can try ironning and higher speed. Change scale.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
🇸🇦 مرحبا بكم في الحجر Welcome to Hegra This model was created by 3D artist Marc Mons. Qasr al-Farid , meaning “ the lonely castle ” in Arabic, is the largest tomb in the archeological site of Hegra (Ancient Greek: Ἕγρα , Arabic: ٱلحجر,…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
Hey there! Here it is! This small Screw for Ikea furniture and other different wardrobes, which is so important to get funitureparts together. As you can see on the pictures i try to copy the design of the original Ikea Cam Screw.…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Srdce přívěsek na klíče
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Sorter for DIN 912,DIN 933,DIN 934,DIN 125 with drawers. Optional you can use 4x m3ns nut and 4x m3x8 screw for better fixation of top sorter to case. Supports no needed. UPDATE 04_02_2020 -added pictures for better transparency on…
Print approx. €9.96–€12.17 excl. taxPreliminary estimate for one variant
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Enhance your space with the Sri Yantra Coaster ! Measuring 100 mm in diameter and 4 mm in thickness, this coaster showcases the ancient and powerful…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
DISCLAIMER: Make this upgrade at your own risk, always do your research and make sure to solder in a well ventilated area and always make sure to have the power turned off on the printer before installation!!! Description: Cover and…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Hallo Freunde der Audiotechnik, anbei gibt es STLs und G-Codes für einen Focusrite 4i4 (3rd Gen) 9,5Zoll Rack Halter. Ihr braucht für ein komplettes Set folgende Teile: 2mal Rackmount 2mal Stabilisierer Top 2mal Stabilisierer Down…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
I didn't want to drill holes into my closet, thats why I designed simple connectors to put 3M double sided tape on the back. Other connectors are mostly designed for screws or are hollow, making it very hard to attach the HSW without…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Airsoft Sniper VSR piston and spring pin. I have 2 variants of piston (both work even on stronger springs) And the pin, it is better to put a bearing or a…
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for one variant
G&G uses V2 gearboxes for theirs SR25 replicas, so if you want to use a regular M4-type hopup chamber, you need to use this adapter between the gearbox and the hopup chamber. No printing supports required.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
J'ai changé mon plateau en verre par un plateau acier avec feuille de PEI, comme beaucoup. https://fr.aliexpress.com/item/1005003198020145.html?gatewayAdapt=glo2fra&spm=a2g0o.9042311.0.0.5b6e6c37kdGHKX c'est toujours la misère a replacer…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
I designed these for my mom after she lost one of her original ones. I used a ballistic chronograph to compare to the originals and was unable to see any difference in performance. Printing notes: The casing is printed in PETG, and the…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
This is a snug fit for the Clarett/Clarett+ 2Pre (including its rubber feet) and the latches hold the interface firmly in place. So it's no problem to plug in/out an XLR cable with one hand. Yet, after disconnecting the cables on the…
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for one variant
DISCLAIMER: Make this upgrade at your own risk, always do your research and make sure to solder in a well ventilated area and always make sure to have the power turned off on the printer before installation!!! Description: There are times…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
The flathead and PZ/PH holders are optimized for Wera srewdrivers, but will fit other brands. The large holder was printed with a 0,8mm nozzle, to get this out quicker. This was to big for writing this size markings. Unfortunately this…
Print approx. €4.62–€5.65 excl. taxPreliminary estimate for one variant
Use this device to push in MSR mini groundhog stakes without hurting your hand. Then after removing the stakes from the ground unscrew the insert and use it to scrape the mud/dirt off of the stakes.
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
this is part specific, guaranteed fitment with… asrock b650i lightning, with IO plate removed asus 4060 lp with io shield removed and up to about 69-71mm cpu cooler clearance, I have used a IS-55 with a P12x25mm you want a 120mm fan for…
Print approx. €7.60–€9.28 excl. taxPreliminary estimate for PETGSource material: PET
hc-sr04 sensor compatible with an arduino It's easy to attach the model to a contruction with bolt and nut or screws. No specefic printing instruction needed.
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
With this 5-round limiter for the Magpul PMAG 10 LR/SR Gen M3 you can with ease limit the capacity. What you get: - A drop in replacement. - Compared to other variants, this one is fixed in place. - If the magazine gets wet, channels in…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
This is a mounting bracket that holds a JSN-SR04T ultrasonic sensor and waterproof DS18B20 temperature sensor for mounting to a 1" square tube. This is part of a project to measure the water level of a creek. The sensor will be extended…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
Prusa MK 4, lze tisknout bez podpěr. Jedná se o přívěšek ve tvaru srdce když se spojí dva kousky dohromady
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Hello, I'm uploading my own version of an ultrasonic HC-SR04 sensor holder. This design has a tight fit, so please be careful when inserting the sensor. To print, please place the gadget in the orientation shown in the photos. This will…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
Instagram: @roiku3d
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Very simple stand for screwdrivers 3,5mm hole dimension.
Print approx. €10.90–€13.32 excl. taxPreliminary estimate for one variant
Ich war immer genervt über die Stapel an Fräsronden, die so aufgelaufen sind. Mit dieser Halterung stehen diese nun ordentlich im Schrank.
Print approx. €8.83–€10.79 excl. taxPreliminary estimate for one variant
Bosch GSR 10,8 V 12 V Wandhalterung
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for one variant
Pi noIR camera mount
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
A simple hex bit holder for possibly anything Bosch that has a ~6mm hole for screw.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
With this little wrench, you can open the spring side of some SR Suntour bike forks. I printed it in PETG with 3 perimeters and can confirm it works :) I used PrusaSlicer to close a hole and add an embossing to jcatx' SR Suntour fork…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
This angled stand is designed for the Focusrite Scarlett 16i16 USB audio interface. Improved visibility: Tilts the unit 15° for better viewing of input meters and front panel LEDs at desk height. Cable-friendly: Raises the interface…
Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant
Zumindest teilweise verzichtet Braun auf den Farbring der Oral-B-Aufsteckbürste und hat die Konstruktion so geändert, dass keine vorhandenen Farbringe genutzt werden können. Stattdessen ist ein kleines Symbol zur Unterscheidung der…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Sony SRS-XB23 wireless speakers are famous for their high-quality sound, but their big drawback is directionality. When placed on a desk, the sound does not travel in a straight line to the ears. This stand solves this problem . When you…
Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant
I wanted to resurrect my Pentax 67 that I bought on a trip to Japan but it's battery was depleted after a few years. Trying to order an original V28PX battery turned out to be quite difficult so I tried a few adapters on the internet but…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Thermal shields for outdoor measurements using Tesla TSR-4m series radon/environment instruments. The lid can be fixed to the body part using zip ties. Designed/tested to be printed from PETG on Prusa MK3s with standard 0,4 mm nozzle.…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
The Focusrite Scarlett 2i2 (4th gen) has a circular volume LED around the input 1 and 2 inputs. At the time of this file's creation, there is no software solution for disabling it. This knob was designed to block out that light. This knob…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Back connection cover. For Wago. 221-413 WO Logo.
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
This collection of 3D models is designed as an example for teaching mathematics, helping to make the concept of integrals easier to understand. The models show the area under a curve, Riemann sums with different rectangle widths, and…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
Verschiedene Dart übungsringe
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
i have replaced my original battery holder on my Ibanez SR600 for a new one from amazone.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
After dropping the razor in the shower again and again I was tired of this and made this very simple but effective holder. Printed fast and does its job. ----------------------------------- Nachdem ich mir der Rasierer gefühlt das…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Attaches to the belt clip mount using a 4mm screw. very handy when you need two types of tool bits on the same project
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
untere (größere) Ersatzspannhülse für LED-Scheinwerfer-Stativ mit Trapezgewinde TR38x3, die originale Spannhülse war geplatzt Festigkeit ist mit PLA ausreichend, gedruckt auf einem Prusa XL
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Just a simple classroom number
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Das Trainingsrad wurde sowohl für Ausbilder als auch für Schüler entwickelt und ist ein wunderbares Werkzeug, um die Beziehung zwischen den sechs Richtungen und den drei Dimensionen deutlich zu machen. Es lässt sich leicht erklären und…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Star Trek Achsrotation MK4 / MK4S Enterprise D um Planet habe ich mit 50% Infill und einer 0,4 Nozzle und 0,10mm Fast Detail im Prusa Slicer Gedruckt über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
History: After installing a LED bar on my car with the license number plate bracket (the one that you screw on to your bumper, behind your existing license plate) the weight was making the bar bounce up and down while I was driving. The…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
https://www.mall.cz/rc-modely/lamps-sroubovaci-hasicske-auto-na-dalkove-ovladani?gclid=Cj0KCQiAnsqdBhCGARIsAAyjYjRI8vkeLAqMRNruFsyS-eYX-7Desd_rW-es0RZ_zKv_AnUvLjWo5wwaAsJGEALw_wcB
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Unser Maskottchen begleitet uns auf unseren Radtouren. Auch ihm darf die persönliche Schutzausrüstung nicht fehlen. Das Brillenglas ist aus transparenten Filament und wird in das Gestell geklebt. Die Ohrenhalter sind am Brillengestell…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
Replacement lid for Tesla TSR 4S/4M that covers power switch, LEDs and antenna connector. Insert rubber seal ring between top layer and the lid, so the LEDs don't create tension.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
This was my first attempt at making/remixing anything, so any feedback would be appreciated. I've had zero issues printing this using the following- Material: PLA+/PETG (I used sunlu petg) Nozzle: 0.4 mm Layer height: 0.2 mm Infill: 15%…
Print approx. €5.29–€6.46 excl. taxPreliminary estimate for PETGSource material: PET
Pick up any screw from the hardware store that fits the holes and goes deep enough into the desk. I found 3-4mm past the other side is enough for a tight and secure placement. Print on the side and use organic supports.
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for one variant
Simple case for the FrSky R-XSR receiver with a 20mm hole spacing. Can be mounted on the bottom of the Volador VX3.5 with M2x6 screws Printed on a MK4S with PLA and TPU, 0.15mm
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
potreba neodym magnet 10x10x2 M3 x 20 imbus, valcová hlava
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Srdíčka vytvořená v TinkerCad - jedna verze z kruhu a trojúhelníku, další ze základního tvaru srdce. Piškvorky.
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
This part is designed to fit into the side of a step from a ladder. It's origin is for a scaffold angle bar to tighten the scaffold, but I suppose it can be used in quite a lot applications, e.g. hanging a bucket beside the ladder. The…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
Ultrasonic level meter case + wifi (SN-SR20-Y1 + WeMos D1 Mini ESP8266) - Waterproof Dustproof Ultrasonic Ranging Module Pouzdro ultrazvukový měřič hladiny + wifi (SN-SR20-Y1 + WeMos D1 Mini ESP8266) - pro měření výšky hladiny pomocí…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
This replaces the obsolete 1.35V mercury batteries with either one 3V CR-1/3N or two 1.5V LR44 or SR44 batteries. Note: This camera's meter was designed to run off two 1.35V batteries (2.7V in series). Using one 3V or two 1.5V batteries…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Update - The Dowels have now been fixed! Added a 25% scaled up version! Looks elegant and details are more prominent! - Scaling up the model by 20-30% will look amazing! Lockheed Martin's Blackbird SR71 is one of my all time favourite…
If you would like to download this, please do so from MakerWorld - https://makerworld.com/en/models/96340
This is my model of the SSV Normandy SR2 from the Mass Effect series. It is the Alliance version from the third game. The model is some 50cm long and is a kit. The pieces are divided per their color. For the assembly, I recommend to watch…
UPDATE 8/17/2023: Updated Build Guide from v0.1 to v0.2. This includes more information and links in the electronics and internals section of the Parts List, more specifically adding the specific battery needed to fit inside of this…
Snapmaker U1 DIY Top Hat By. Srin Snapmaker U1 DIY Top Hat 입니다. This is a Snapmaker U1 DIY Top Hat. 최소한 250mm 출력이 가능한 프린터가 필요합니다. A printer capable of printing at least 250mm is required. https://github.com/srinn/Snapmaker-U1-DIY-Top-Hat…
Print settings (example) Raft or Brim: None Supports: No Layer height: 0.2 mm Infill: 100 % Screw hole is 4mm diameter.
I liked the Bit-Holder for cordless screwdriver (Bosch) and had used it for several month, until eventually it broke recently as it has a weak spot at the right arm. As anyway the original was way too tight (had to scale up and expand the…
The legendary SR-71 Blackbird, now brought to you in Kit card form! The SR-71 Blackbird was a high altitude, stealth reconnaissance jet, capable of traveling at speeds of over mach 3. Operated by the United States Air Force between 1966…
1 Setup The FLSun SuperRacer is not official supported in the PrusaSlicer software. So we need add our own printer or use a similar to start with. Let's go! 1.1 Initial printer setup We start the PrusaSlicer and then from the…
The Shell Case is a simple and effective solution for organizing cooling on the ASRock AMD BC-250 module. This snap-on shell allows you to mount a single fan quickly and securely without modifying the card or its case. The model requires…
Summary This is a model of a Dodge Viper GTS Coupé (SR II) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts ;-) After printing, the model can be assembled with the help of integrated…
I need to service my fork recently and I found this ( https://www.thingiverse.com/thing:883685 ) on Thingiverse, so I print it out and unfortunately; it is too big and it does not fit my cheap shock. SAD... I then fire up my trusty CAD…
Perfect gift packaging for your friend (56 screw). Screwdriver included. !!!!!!!!!!!!!! If there is any problem with screwing in the screw, first screw in the M8 metal screw which will correct all errors in our printers!!!!!!!!!!!!! I…
I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.
The default model is 2mm thick and arround 40cm. It was abviously to large for my ender3 so i split it in the middle. You can scale the parts as you want but don't scale all the axis the same otherwise the tickness will change too. You…
I needed a mount for my scarlet 2i2 to declutter my desk, so I drew up this design, intended to mount wit 4 countersunk screws. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move…
The new model of SRAM chain gap tool provided with AXS derailleurs Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: Prusament PLA Category: Tools
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
DIN rail mount for a SSR. Designed for the SSR that comes with the RatRig V-Core 3. A optional spacer for better air circualtion is also available. Prints without supports. Printed in PETG at layer height 0.2mm. Mount is designed for M3…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Currently refining a small obstacle avoiding mecanum robot for an introductory robotics club and needed a simple mount for a servo driven ultrasonic sensor. This design is a single piece print with no supports that printed quickly in PLA+…
This is the Signal Disruptor / Mute Jammer from Rainbow Six Siege. The model is Printed seperately and assembled after printing. Since Thingiverse only supports single file downloads due to increasing incompetence, I had to include…
The pedal faces don't require the spacers and the spacers don't require the pedal faces. You can use either independently. Pedal Faces: * Less slippy than original pedals when playing in socks * Can be used with the original m4x8mm…
- Toy style two-piece dual color version of Lockheed Martin's Blackbird SR-71 and F-35. - Easy to resize, easy to print (no supports) and to be used as giveaway, toy, or design object - ideal with the small optional stand for a table. -…
I found several existing mounts for the Focusrite Scarlett Solo (3rd Gen), but all of them had some fancy locking mechanism and/or required supports to print properly. More importantly, it looked like all of them were too close to the…
[NOTICE]: I just added a new version with wider hole spacing for someone's SRP Lite. For others with SRP Lite those holes don't seem to work. Measure your own pedals to see which ones you have. Modelled entirely myself, but mostly a…
Just added the smile like on the original design https://www.thingiverse.com/thing:1364024 :-) Fits perfectly Ultrasonic HC-SR04 sensor and standard servo mount Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
![[Remix] Moza SRP Pedal Faces](https://media.printables.com/media/prints/92352616-5f25-4128-8e0f-dedfb2d90535/images/9523628_1a83e115-11e8-4606-8d85-5759bb99e173_7bdb50b2-2bdb-4b06-bc61-a92ebaa29ace/20250417_181116.jpg)
