Search results: suga

Sort order

441 models

P
Printablesbunnyology

Sugar Portioner (1g)

For "cocking engineers", who need a perfect amount of sugar or salt. I designed the sugar dispensers for the right sweetness in my morning coffee (while a salt dispenser came out just as a by-product, resulted from a mis-calculation of…

Print approx. €3.68–€4.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
207
Likes
39
Rating
4
P
PrintablesGabriel

Simple tray for tiny sugar, backing powder and etc packets

Print as you wish, it will be hard to have it wrong

Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant

Downloads
43
Likes
10
Rating
0
P
Printableseof

Travel Box for Sugar Cubes / Reiseschachtel für Zuckerwürfel

A little box for four sugar cubes. I designed it für cubes in the size of 16 mm x 16.5 mm x 11 mm. I uploaded also the *.f3d file, thus you can adjust it. You have to print it twice.

Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
37
Likes
3
Rating
0

◇ Sugar Cube Spiral Vases V2 ◇ Up/Down

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Just flipped makes this model look completely different! VASE MODE but I like to do 2 perimeters for strength sometimes! Original Sugar Cube Vase…

Downloads
2,799
Likes
1,100
Rating
5

◇ Sugar Cube Spiral Vase ◇

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop It looks like it's always falling to the right! So weird! New Versions available: https://www.printables.com/model/541016-sugar-cube-spiral-vases-v2

Downloads
2,632
Likes
773
Rating
4.97
P
PrintablesMattZA

Sugar Skull Keychains

Fun Sugar Skull keychains. Print in two colors for the best look. Color change at layer 26 if printing in 0.2 layer height. Layer height = 0.2 3 Walls Infill = 25% Wall Generator = Arachne Note: Set “Top Surface” Line width to 0.32 (Using…

Downloads
2,224
Likes
774
Rating
4.93
P
PrintablesThomas

Sugar dispenser

This sugar dispenser dispenses teaspoon-sized doses of sugar by rotating the knob. The reservoir contains about 60 grams of sugar, enough for plenty cups of tea! Print instructions Print at 0.15mm layer height for best fit of threaded…

Downloads
1,644
Likes
281
Rating
4.81
P
PrintablesLastByte

Cruz de Santiago Sugar Stencil

This is a stencil to create the sugar cross design the Almond Cake is famous for. The stencil is 10 inches tall so you would have to scale it within Cura to fit your cake pan. Additionally it has a raised area for easy removal after the…

Downloads
1,462
Likes
10
Rating
5
P
PrintablesWilko

Sugar Scoop

My mother had a wooden sugar shovel and my sister also wanted one of that size. My father then said he would like to have "one number" smaller. So I took my calipers, took some measurements and created a quick model in Fusion 360. Nothing…

Downloads
1,223
Likes
181
Rating
4.78
P
PrintablesEduard Sukharev

Sugar Skull Makeup brush holder

This is a brush holder for your makeup brushes. Made to fit: 2 large brushes (15mm ø) 1 large brush with flat handle (20mm×10mm) 10 medium brushes (0.9mm ø) UPDATE: Added hexagon cavities to add weight to the holder. Add custom G-Code to…

Downloads
1,105
Likes
256
Rating
5
P
Printablesgrow a youtuber

grow a garden sugar apple

this is for true grow a garden fan wanting to go farther than just playing

Downloads
968
Likes
33
Rating
5
P
PrintablesTheCraftyMaker

HueForge Wall Mountable Frame (cyanidesugar collab)

IMPORTANT: This is the 3 slot version. The single slot version is available here . Update 23/02/2024 Added a new box of size W 160mm x H 240mm Update 11/01/2024 Added a new box of size W 200mm x H 200mm Update 22/11/23 Added 2 smaller…

Downloads
928
Likes
787
Rating
5
P
PrintablesSplemsby

Fallout Sugar Bombs Cereal

No supports At 100% scale each sugar bomb is 24.8mm tall, or the size of a very large Corn Pop. These were designed for a 0.4mm diameter nozzle. The tail section has a constant width of 0.8mm FYI. Cereal should be light weight, so…

Downloads
888
Likes
223
Rating
5
P
PrintablesLayers Studio

Sugar Pot

A simple Sugar Pot design with room for the spoon.

Downloads
841
Likes
125
Rating
4.93
P
PrintablesStigern

Flower Sugar Skull

Flower Sugar Skull Bring a touch of Día de los Muertos flair to your desk, shelf, or altar with this intricately detailed Flower Sugar Skull! Perfect for lovers of decorative art, cosplay props, or unique home décor, this 3D-printable…

Downloads
776
Likes
133
Rating
5
P
PrintablesPiercet

Sugar Skull with a Solid Base

Ironically I needed something with a solid base, so this is just the same thing with a solid base layer and some cutouts to let light through for decoration. Photo used courtesy Travis Elijah, all photo rights reside with him, thank you…

Downloads
771
Likes
154
Rating
5
P
Printablestommycederlund

Case for Raspberry PI 3 / 4 with a PiSugar 2 PRO or PiSugar 3

This is a case for Raspberry Pi 3/4 and the PiSugar 2 PRO (The Pisugar is a UPS for Raspberry pi : https://www.pisugar.com/).

Downloads
699
Likes
21
Rating
5
P
PrintablesBarravox

Case for Raspberry Pi Zero 2 W with a PiSugar2

This is a case for Raspberry Pi Zero 2 W and the PiSugar 2 (The Pisugar is a UPS for the Pi Zero: https://www.pisugar.com/). This case needs 4 off M2.5 x 12mm long screws to clamp the Pisugar to the Pi Zero through the bottom of the case.…

Downloads
602
Likes
21
Rating
0

Sugar Glider

Here is the Sugar Glider model! This free listing includes only the single-color STL for printing. On my Patreon you'll get the multicolor 3MF files, easy-to-paint STLs, keychain versions and split-color files, plus access to 60+ other…

Downloads
543
Likes
89
Rating
5
P
Printablesrandom.ae

Sugar Skull T-Rex [HueForge]

Print at 100% infill with a layer height of 0.15mm with a base layer of 0.2mm Filaments Used: PETG KVP Black PETG Polymaker PolyLite Dark Blue PETG Polymaker PolyLite Silver PETG Overture White Swap Instructions: Start with Black At layer…

Downloads
514
Likes
289
Rating
4.75
P
PrintablesMrDrem

Pwnagotchi case for Waveshare and Pi Sugar v2

The cases in the original only had versions for the Pi Sugar v1. The V2 has both a switch and a button. I rejigged the case based on both this and the Pi Sugar cases (purely used to get the hole locations correct) and updated the buttons…

Downloads
504
Likes
33
Rating
3.75
P
PrintablesMark McIntyre

Stylish, Minimalist Sugar / Sweetener Packet Holder

After keeping sweetener packets in a small bowl for years, I decided it was about time to make something a bit more stylish. This minimalist holder will accommodate pretty much any sweetener packet: Sugar, Splenda, as well as unsweetened…

Downloads
481
Likes
60
Rating
4.88
P
Printables3DPrintBunny

Tea, Coffee and Sugar Container Set

Screw top containers for tea, coffee and sugar They have been designed to print without supports If there is anything else you want added to the set - let me know in the comments :) @3DPrintBunny

Downloads
477
Likes
71
Rating
0
P
Printablesexperify3d

PWNAGOTCHI Pisugar 3 - pi Zero 2 W - papwe 2.13" - 1300 mah

Features: USB C charging port 2 buttons (need tolerance check when printing) side hook perfect fit for the display perfect fit for the battery + the magnet mount to the Pisugar 3 the lid is a tight fit but it has 2 holes for easy removal…

Downloads
436
Likes
27
Rating
0
P
PrintablesSPD3D

Sugar Skull Vase (Multicolor)

Decorative multi color sugar skull. Suitable for candy or as a planter. Print instructions In Prusa Slicer clik Split to Parts It needs supports under the back, eyes and decorations, Scale %100 or above No raft No brim

Downloads
404
Likes
65
Rating
5
P
PrintablesMrGravity

Flower Sugar Skull

A festive and ornamental take on the classic skull, this piece is adorned with floral carvings that give it a lively and celebratory look. Inspired by traditional sugar skulls, it's perfect for adding both charm and symbolism to your…

Downloads
399
Likes
66
Rating
5
P
PrintablesCajunMeemaw

Sugar Skull Kings Cigarette Case

Ive printed quite a few cigarette cases that ended up not being the right size or not very durable with hinges in pla so I decided to just make one myself. Holds 18 king sized ryo cigarettes with dividers to keep them from moving around.…

Downloads
382
Likes
85
Rating
0
P
PrintablesCreators

Calaverita de Azucar (Sugar Skull)

English We created this model of a Calaverita de azúcar commonly used on Day of the Dead altars. The model is divided into two parts: the skull itself and the decorative elements typically found on sugar skulls. These pieces are separated…

Downloads
372
Likes
60
Rating
4.5
P
PrintablesArsen

Minimal sugar bowl

How to print: the bowl can easily be printed standing up without any support or with some support around the base if you like the cap, on the other hand, must be molded with the handle upwards using low density supports to facilitate…

Downloads
357
Likes
45
Rating
5
P
PrintablesDarius_sh

Sugar pots

Merlin's sugar pot. 2 variations. Category: Kitchen & Dining

Downloads
344
Likes
134
Rating
5
P
Printablesmikeymakesit

Pwnagotchi Case (wavesharev2 low profile, PiSugar 1200mah)

I designed my Pwnagotchi case around my build: Raspberry Pi 0 W Waveshare v2 with "slim-agotchi" low profile mod PiSugar power pack with 1200mAh battery It's a snug fit that exposes the USB ports while the cover is dovetailed and slides…

Downloads
336
Likes
15
Rating
5

Sugar Cube Stack ◇ Vase Mode

The trick is to GO SLOW ! This will want to bend when it gets tall so SLOW IT DOWN! By the time I got to the top cube I was at 45% speed.

Downloads
332
Likes
103
Rating
5
P
PrintablesKPStephan

Smoky Sugar Skull - Hueforge

Decorate your wall with a monochromatic smoky sugar skull. Created with Firefly and Hueforge and printed on the Bambu Lab X1C. STL and Bambu 3MF files available. Hueforge color settings I used (but you can choose your own): Layer 0-6 -…

Downloads
323
Likes
107
Rating
5

Sugar Cube Tree for Bambu Lamp Kit 001

This is a remix of my famous Sugar Cube Tree that fits the LED Lamp Kit from BambuLabs. Tree prints with NO INFILL. No Supports - LED Kit: https://us.store.bambulab.com/products/led-lamp-kit-001?variant=41806987395208 The tree prints with…

Downloads
316
Likes
90
Rating
5
P
PrintablesCarter

Slipcase for Pi4B+PiSugar3

This Case was created by/for BiblioTech Sans Frontieres, consider supporting them please. https://www.librarieswithoutborders.org/ New Version June 2024 larger, better cooling, better fit, easier assembly, etc This case is for the…

Downloads
314
Likes
14
Rating
5
P
PrintablesMask Man

Women Sugar Skull Art

This is latest Skull sugar women 3d printable, download, print and share with me, you can also visit my cults profile - https://cults3d.com/en/users/Maskman120899/creations

Downloads
312
Likes
84
Rating
5
P
PrintablesBlack Jack

Yellow Sugarcane Harvester With Movements

There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…

Downloads
311
Likes
32
Rating
0
P
Printableswiste95

Organizer for Baking Sachets – Slim & Diagonal - Backing Powder, Vanilla Sugar & More

Need a better way to organize your baking sachets? This slim, diagonally arranged organizer is designed to store small packets like vanilla sugar, baking powder, cream stiffener, and flavorings in a clear and space-saving way. With a…

Downloads
307
Likes
118
Rating
5
P
PrintablesStigern

Rose Sugar Skull

🌹 Rose Sugar Skull – A Blooming Tribute to Día de los Muertos 🌸💀 Celebrate beauty in the macabre with this intricately detailed Rose Sugar Skull , inspired by the vibrant spirit of Día de los Muertos. Some supports are needed. I used…

Downloads
305
Likes
75
Rating
5
P
PrintablesV0rT3x

Pwnagotchi case for Pimoroni Display Hat Mini and Pi Sugar v2

To have a good alignment the magnets need to be removed from the battery and the pisugar2. I added a version without pisugar and battery.

Downloads
303
Likes
18
Rating
0
P
PrintablesDecorartor

Sugar Skull Multi-Purpose Holder

Celebrate color and craft with this Sugar Skull Holder. The sculpted relief catches light beautifully, while the hollow crown functions as a small vase or holder for dried stems, makeup brushes, pencils, or a tealight in a glass insert.…

Downloads
291
Likes
73
Rating
4.5
P
PrintablesGuyonacouch

Bic Lighter Case Sugar Skull

A lighter case designed to fit a standard size Bic lighter adorned with a sugar skull. Halloween 2023 collection.

Downloads
275
Likes
56
Rating
0
P
PrintablesMonsieur-Pierre

SUGA (BTS) Figurine

💖 Support Me If you like this model and want to use it for commercial purposes , you can support me on Patreon and get a commercial license https://www.patreon.com/cw/MonsieurPierre This detailed figurine is inspired by SUGA — known for…

Downloads
272
Likes
17
Rating
4
P
Printables0dysseusRex

K1 Sugar-Skull Extruder with Filament Cutter

Want to show appreciation? Consider checking out my Ko-fi After struggling with finding a good solution to add a filament cutter to my printhead for use with a 3DChameleon MMU, I decided to just make my own. NOTE: G-code is still being…

Downloads
269
Likes
95
Rating
5
P
PrintablesAl Schramm

pisugar3-whisplay-chatbot-fdm

pisugar3-whisplay-chatbot-fdm

Downloads
265
Likes
7
Rating
0

Sugar Cube Tree ◇ Vase Mode

Based on this vase- https://www.printables.com/model/440085-sugar-cube-spiral-vase

Downloads
265
Likes
76
Rating
5
P
PrintablesBecker Thorne

Sugar Skull Christmas Ornaments

Sugar Skull Christmas Ornaments Category: Decor

Downloads
263
Likes
55
Rating
5
P
PrintablesLetz3D

Top Case for "Pwnagotchi case for Waveshare and Pi Sugar v2"

Alternative Top Case for "Pwnagotchi case for Waveshare and Pi Sugar v2" You can find the Case and Buttons here: https://www.thingiverse.com/thing:4551538

Downloads
251
Likes
15
Rating
0
P
PrintablesMarlin

Milk Crate Tea & Sugar Organizer

both tea and sugar crates measure 84mm x 84mm x 75mm @ 100% scale

Downloads
249
Likes
86
Rating
5
P
PrintablesFractaly

Octopus Vase / Sugar Bowl / Container with Spoon

An octopus-themed bowl that comes with a beautiful custom octopus spoon! There is a version that has the text “sugar” on the back and a version without that. This is an easy print, each part pretty smooth to print and looks elegant :) I…

Downloads
240
Likes
73
Rating
5
P
Printableshomelabd

Pwnagotchi Case PiSugarv2 Wavesharev4 RPi02w

This a remix of PantsManUK's remix. The original carabiner loop was a bit choppy when trying to send off to 3D Printing Services like PCBWay, so I fixed that. Also, the NEW_LID file is actually done by formlessform @formlessform_1988521…

Downloads
238
Likes
7
Rating
0
P
PrintablesLyosal

Ant sugar water feeder

Helps to feed your ants without them drowning them self. For small colonies only.

Downloads
237
Likes
28
Rating
5
P
PrintablesPhunXter

Sugar Cat 3

Sugar Skull Feline Friend Made for halloween / Day of the dead I decided to print this 350mm high and hand paint all of the white sections…. no small feat i can tell you. For the 350mm & 250mm versions Layer height : 0.32 Infil : 5% For…

Downloads
228
Likes
49
Rating
5
P
PrintablesLecso

Baking powder, yeast, vanillin sugar bag holder

I found multiple holders for the bigger spice bags, but scaling them down resulted in a thin wall. This one is for the 6cm wide bags, usually baking powder, yeast and vanillin sugar comes in this size.

Downloads
228
Likes
30
Rating
4.86

G-scale / Gauge 1 "Sugar" 4-Axle Car

THIS IS MY FIRST MODEL & IT SHOWS Print at your own risk! I'll put out an updated version eventually, but this is not as good as it should be! This is a little 3D-printable sugar flatcar I made, based on both the HLW and LGB equivalents.…

Downloads
216
Likes
32
Rating
5
P
PrintablesDBert

Sugar Rocket components - Nozzle and nose

I'm working on a simple sugar rocket and I designed this nozzle starting from the most common nozzle shape I found on wikipedia (the converging-diverging nozzle). You will need a PVC tube with an internal diameter of 22mm and external…

Downloads
208
Likes
17
Rating
5
P
PrintablesPRex

Bee waterer -/- sugar water floating feeder (for 2 and 5 gallon buckets)

This design allows anybody to feed bees and or attract them to their gardens for pollination. You can use a 2 gallon or 5 gallon bucket from the hardware store. This design almost eliminates drowning bees and fighting bees due to its…

Downloads
207
Likes
18
Rating
5
P
PrintablesAdam Vaněk

Sugar Cube Clipper Case

fits in tight, push it in hard enough

Downloads
204
Likes
44
Rating
5
P
PrintablesPAN_OWECA

Sugar rocket

The dimensions of the stand are: 14,8 (height) 5,4 (length) 5,4 (width) This is very fast and stable sugar rocket

Downloads
203
Likes
13
Rating
1.5
P
PrintablesArkona

Sugar bowl

Tisk bez podpor. Vrchní díl tisknut vrstvou 0,2 mm Spodní část vrstva 0,28 mm. Tisk z PETG. _________________________________ Printing without supports. The upper part is printed with a layer of 0.2 mm Bottom layer 0.28 mm. Printing from…

Downloads
198
Likes
24
Rating
5
P
PrintablesJoeRixon

Sugar Rocket or Black Powder Model Rocket Kit + Instructions/Guide + Rammer (Flies 1000ft or 305m)

*(legal disclaimer at bottom) Safety: If undertaken please make sure it is legal in your location and fly model rockets outside and away from people, property, and living things, the methods in this guide can be dangerous and might not be…

Downloads
197
Likes
37
Rating
4.67
P
PrintablesOrdspilleren

Priming Sugar Spoon

This is a simple spoon for adding priming sugar to bottles. A Fusion 360 project file is included for easy modification.

Downloads
190
Likes
30
Rating
5

Sugar Skull 1 - 2D Geometric Wall Art

We continue with the Spooky Halloween 2024 Series, and this time, we're introducing a striking sugar skull wall art. This piece features intricate, symmetrical lines and floral-inspired patterns, capturing the iconic Día de los Muertos…

Downloads
188
Likes
30
Rating
0

Ornamental sugar skull keychain

The ornamental skull keychain was a design we created for a friend. The design is inspired by the logo of his bar, which resembles the style of Mexican skulls and sugar skulls. We think it's an interesting keychain to print now that…

Downloads
186
Likes
47
Rating
5
P
PrintablesRoute3d6

sugar packet dispenser

Dispenser for Splenda packets, I uploaded with and without the corny joke for people who use a different sweetener or have no sense of humor. Prints without supports. Left dispenser can be screwed to wall or attached with command strips,…

Downloads
167
Likes
25
Rating
5
P
PrintablesTomoDesigns

Sugar Pot

Hi! I made this lovely sugar pot but you can also store more into the pot like plants or whatever you like! If you make it please share your pictures!! Printing settings Make sure that you use supports on the print for the parts like the…

Downloads
164
Likes
32
Rating
0
P
PrintablesTooooobi

Scoop for household for example laundry washing powder, wheat, sugar or similar

Scoop for household things for example laundry washing powder, wheat, sugar or similar. Im using it for my washing powder and its perfect. No support needed.

Downloads
164
Likes
16
Rating
5
P
PrintablesMiniWorld3D

Sugarloaf Mountain ( Pão de Açúcar ) - Rio de Janeiro , Brazil

🇧🇷 Bem-vindo a Brasil! Welcome to Brazil! This model was designed by Dany Sánchez in both regular version and MMU. Sugarloaf Mountain is one of the most famous and attractive landmarks of Rio de Janeiro, and Brazil, right after the…

Downloads
164
Likes
39
Rating
0
P
PrintablesBRE3DLOVE

Sugar Packet Holder | Splenda Packet Container | Interchangeable Labels

Latest files are available on MakerWorld. Get the full color separated Plate Print Profiles: https://makerworld.com/en/models/19550 === Here is a container for sweetener packets. Similar to the ones you see in restaurants and diners. But…

Downloads
162
Likes
16
Rating
5
P
PrintablesTheCraftyMaker

Single Slot HueForge Wall Mountable Frame (cyanidesugar collab)

IMPORTANT: This is the single slot version. The 3 slot version is available here . Update 23/02/2024 Added a new box of size W 160mm x H 240mm In a creative collaboration with designer cyanidesugar , we've crafted a stunning 3D model – a…

Downloads
160
Likes
48
Rating
5
P
PrintablesHenry Levesque

Raspberry Pi Zero and Pi Sugar Battery Case - Open Data Collection Project

This Raspberry Pi Zero and Pi Sugar Battery case is part of the Raspberry Pi-based open-source data collection project. More information can be found at the Github Repository link below: https://github.com/hleve/rpi_data_collection This…

Downloads
154
Likes
6
Rating
1
P
PrintablesShawinkle

Entonnoir pour recharge de sucre / Funnel for refilling sugar

Simple petit entonnoir idéal pour recharger les emballages souples de sucre, en utilisant du sucre en paquet, bien moins cher. Simple little funnel ideal for refilling sugar squeeze packs, using much cheaper packaged sugar. Ender 3 / PETG…

Downloads
152
Likes
9
Rating
5
P
Printablesjodok.fehlmann

3D Printable Tintin Rocket with Homemade Sugar Rocket Propulsion

Our 3D printable Tintin rocket is a fantastic model rocket for those looking for an adventure. The model comes with STL files for 3D printing, making it easy to create your own customized rocket. To add to the excitement, the rocket is…

Downloads
152
Likes
11
Rating
0
P
Printablesorto

Alpullu Sugar Factory

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lFG9yXjgM6p This file depicts some of the buildings of Alpullu Sugar Factory. The factory was opened by M.K.Ataturk in 1926. Category: 3D Printing

Downloads
151
Likes
12
Rating
0
P
Printablesdcortes

Sugar Molecule Cookie Cutter

Sugar molecule cookie cutter. Makes a decent sized biscuit/cookie at 90mm x 56mm (approx 3.5" x 2.25"). New learner in the world of 3D printing so figuring it out as I go along. Print Settings Printer Brand: Monoprice Printer: Select Mini…

Downloads
150
Likes
44
Rating
0
P
PrintablesMichael Goodley

Sugar Spoon Replacement

Did your delicate porcelain sugar spoon snap in half because of your disgustingly strong hands? Worry not for now you can print a replacement which is much more durable!

Downloads
150
Likes
29
Rating
5
P
Printablesndl

Powdered Sugar Sifter fully 3D printable V4.5

rinter: own build ndl v2 Rafts: No Support: Yes Resolution: 0.1 - 0.2 Infill: 40-60% Filament: Generic ABS orange and grey Notes: TODO: Make a build HowTo, some Photos from print. Print in ABS, Infill: 20-40%, Speed: 60mm/s, Bed: 90…

Downloads
147
Likes
25
Rating
0
P
Printablesthudson

Sugar skull clay cutter

Update: Changed dimensions of teeth for better print quality. Use the “new version” STL.

Downloads
145
Likes
45
Rating
0
P
PrintablesFedi

2 Size Sugar Spoon

2 Size Sugar Spoon It's printable without supports. I used supports to have a nicer surface inside…

Downloads
144
Likes
30
Rating
5
P
PrintablesMarley

Pwnagotchi Case – PiSugar, Raspberry Pi Zero, Waveshare V4

This is a case for a Pwnagotchi that uses a Raspberry Pi Zero, PiSugar S battery, and Waveshare V4 E-Ink screen. Note: Once you put the SD Card in it is very hard to remove.

Downloads
142
Likes
13
Rating
0
P
PrintablesBoby

Tupperware sugar mill cross

We own a sugar mill from tupperware and there is a small pastic cross which presses the sugar through the sieve. The problem is: this little cross formed plastic part is so weak, that the compressed sugar at the bottom of the mill forces…

Downloads
142
Likes
17
Rating
5
P
PrintablesMakerBlock

Sugar / Raw Sugar Packet Holder (parametric!)

Same great taste, now parametric! The OpenSCAD script here was used to generate a sugar packet holder of identical dimensions to my original and dmeehl's version that accomodates raw sugar packets. Print instructions Instructions Adjust…

Downloads
139
Likes
11
Rating
5
P
Printablesyurfeus

Another salt / sugar dispenser

___________________________________________________ UPDATE! FIXED!!! The threads on the bottle and a cap have been fixed! So, now there're two bottles: One is with wider bottle neck, another one - more narrow. “ cap screw1.stl ” fits "…

Downloads
139
Likes
26
Rating
5
P
PrintablesShaun Muir

Container for Coffee Sugar or Tea.

A Container to store Coffee Sugar Tea or any other stuff in. Autodesk Inventor files included for labeling. Print 0.2 PLA ABS Or PETG

Downloads
133
Likes
11
Rating
5
P
PrintablesMacbambi

Robert Libro Sugar Bowl - Thin version

Robert Libro Sugar Bowl is available with two different wall thicknesses. This is the version with the thinner walls. Support (Tree) Fuzzy skin

Downloads
133
Likes
14
Rating
5
P
PrintablesJohn Zee

Sugar Rocket - Work in Progress

A customisable sugar rocket engine with exchangeable nozzles and a pad for static tests. This is a work in progress. I'll publish usage instructions when (and if) this model is ready and tested. Use at your own risk.

Downloads
131
Likes
11
Rating
0
P
PrintablesStJohnny22

Sugar Skull Lampshade

My wife needed a shade for a corner floor lamp as the one we originally had broke. Sketched in Fusion 360. LED bulb recommended! Print instructions Unassociated tags: floor lamp, Sugar Skull Category: Decor Summary My wife needed a shade…

Downloads
131
Likes
28
Rating
0
P
PrintablesFujisama

Pwnagotchi case for Waveshare and Pi Sugar v3

This remix is based on the fantastic Pwnagotchi case for Waveshare and Pi Sugar v2 by MrDrem This case is designed to work with: Raspberry Pi Zero 1/2 Waveshare V2/3/4 Pisugar3 I hope this variation is helpful to others in the community!…

Downloads
130
Likes
17
Rating
5
P
PrintablesNadav Bukhin

Sugar Rockets

This rocket design was inspired by TKOR video: MAKE AT OWN RISK.

Downloads
128
Likes
13
Rating
0
P
PrintablesStepanKTM

KTM SUGAR COOKIE CUTTER

SUGAR COOKIE CUTTER

Downloads
128
Likes
13
Rating
0
P
PrintablesJosh McCullough

Sugar Packet Holder

Feel free to adjust the length using the included SKP file.

Downloads
126
Likes
12
Rating
5
P
PrintablesLynola

Sugar Funnel

Use this big funnel to pour sugar into large jar for making sugar syrup for bees. Nice wide neck to fit in plastic jug to maximize sugar flow into jug.

Downloads
125
Likes
19
Rating
0
P
PrintablesJuanCallon

Sugar Bowl

My old sugar bowl has broken so I've drawn and printed a new one :-) Category: Kitchen & Dining

Downloads
124
Likes
12
Rating
4
P
Printablesmkosiedowski

Weck jar hinged lid - salt or sugar cellar

This lid can snap onto a Tulip Weck jar (108 mm external diameter) and turns it into a salt or sugar cellar. The hinge consist of a piece of 1.75mm filament which has to be glued into place (or melted using ex. a soldering iron) Printing…

Downloads
120
Likes
30
Rating
5
P
PrintablesRik M0RKM

MMDVM Pi-Star and PiSugar2 Case

A basic case capable of taking a PiZero 2W and a PiSugar2. Comes with plenty of cooling holes. The lid is just a press fit.

Downloads
118
Likes
6
Rating
4.5
P

Sugar Cubes (single, set of 25 & Kit Card) for children play kitchen

Summary Sugar cubes in the size 16x16x11mm for children's play kitchen. Available as a single cube, set of 25 or 25 pieces kit card. Can be scaled without restrictions. Print I printed mine in 0.22 layer height, but anything above or…

Downloads
117
Likes
26
Rating
5
P
Printablesbigj121

Sugar skulls

Created off of svg files Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: any PLA PLA Black Category: Art

Downloads
115
Likes
18
Rating
0
P
PrintablesSKartz

Sugar Bowl with Lid

Here is a little sugar bowl that I designed and printed using woodfil filament, then sanded and finished with stain. It can be scaled up or down in size within your slicer depending on your needs. Print with 2 perimeters and low infill. I…

Downloads
114
Likes
16
Rating
0
P
PrintablesDecorartor

Sugar Jar with a Spoon

This minimalist sugar jar is a modern reinterpretation of a classic kitchen essential. With its soft rounded shape, embossed “SUGAR” label, and integrated spoon detail, it feels both familiar and thoughtfully designed. The calm matte…

Downloads
113
Likes
28
Rating
0
P
PrintablesEasypx

Sugar cube dispenser

Sugar cube dispenser A ten-piece sugar cube dispenser for 13x13x13 mm sugar cubes. It has an open top for easy refilling. Equipped with rounded edges to facilitate the easy dispensing and removal of sugar. Furthermore, a fill level…

Downloads
111
Likes
12
Rating
5