Search results: suns

Sort order

438 models

P
Printables3dPeter

Tomtom sunscreen

sunscreen found on Tingiverse for my motorbuddy.

Print approx. €3.93–€4.81 excl. taxPreliminary estimate for one variant

Downloads
359
Likes
11
Rating
5
P
PrintablesSica

Geometric Madagascan Sunset Moth Wall Art | Line Art Specimen Decor | No Supports

Madagascan sunset moth ( Chrysiridia rhipheus ) drawn as geometric line art. Day-flying and iridescent in life, reduced here to a scalloped, many-tailed hindwing — the silhouette that survives as line work. The facet web follows the real…

Print approx. €1.28–€1.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
3
Rating
0

Sunset

Sunset in the savannah at the watering hole (acoustic guitar)

Downloads
2,817
Likes
1,299
Rating
5
P
PrintablesChrisPirillo

Star Wars (Inspired) "Sith Sunset to Sunrise" HueForge Darth Vader

Darth Vader loves watching sunrises (and sunsets). Hates long walks on the beach, however. In the early morning hours, before the galaxy awoke, Vader would venture to a secluded spot on a remote planet, far from the prying eyes of the…

Downloads
1,066
Likes
501
Rating
5
P
PrintablesRobSmo

DJI Mavic Air 2 2s Mini 2 sunshade

Once I created my iphone dedicated sunshade I decided that it's time for universal one. So, this one is a three part print in two size options: normal - fits iphone X/XR/12/13/14 size phones (regular versions) MAX - is designed for big…

Downloads
974
Likes
198
Rating
4.8
P
PrintablesGuym

DJI Mavic Air 2 sunshade

Another Mavic Air 2 sunshade V1: fit for Samsung galaxy S9, but should work for most. Your phone must be at least 55 mm width and do not exceed 160mm length. V2: fit for Samsung galaxy S21 ultra, but should work for most. Your phone must…

Downloads
861
Likes
154
Rating
4.89
P
PrintablesCisco3D

Apex 2001 Sunshades

A Vintage Futuristic Look. With 3d printing You Can. Two Version Available Print instructions Print Best with PLA no Support 5% infill For a snug fit, you should scale model so the width of the 3dmodel is same as width of the head. (I…

Downloads
663
Likes
167
Rating
4.56
P
PrintablesAaen

Humminbird Helix 5 sunscreen and holder

Sun screen and mounting bracket for a Humminbird Helix5 unit. The sunscreen clips on to the unit (from the back) and can easily be removed again. Printed in PLA. No supports required. STEP files are included. OnShape document is here:…

Downloads
649
Likes
33
Rating
5
P
PrintablesTS-Design

CFmoto 450MT (IBEX) Sunshade for speedometer

A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…

Downloads
618
Likes
35
Rating
5
P
PrintablesRUMcajz

Sunset Hill - LED tea light holder

LED tealight holder resembling a Sunset Hill . Fits standard size (37 mm diameter) tealights , but you can customize the size as you wish. I printed the model on the side (see photo), and in line 15 I added a color change to evoke a…

Downloads
595
Likes
246
Rating
5
P
Printablesc00lrunnings00

Garmin Zumo case XT with sunshade

I have added a sunshade to the design of Kytu. ( https://www.thingiverse.com/thing:4446393) Unfortunately, you have to print it with supports now. So a little bit of cleaning in the end is necessary. I printed it with 15% infill, 3…

Downloads
591
Likes
33
Rating
0
P
PrintablesTinnut

Another Space ship fleet for A Billion Suns

This is another fleet for the game A Billion Suns. There's one of each type of ship and they're compatible with the flight stands: https://www.thingiverse.com/thing:4772265 and https://www.thingiverse.com/thing:4796867 PLEASE NOTE: Apart…

Downloads
587
Likes
70
Rating
5
P
PrintablesNottingham82

garmin striker 4 plus sunshade

Should fit Garmin striker 4 plus and cv plus. Attaches without adhesive and prints without support.

Downloads
546
Likes
46
Rating
5
P
PrintablesRealNationPrint

One Piece Ruffy Hueforge - Sunset

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Orange At layer #18 (1.52mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest.

Downloads
484
Likes
157
Rating
5
P
PrintablesClubZ

Tesla Model 3/Y SunShade Clips

This model allows you to locally produce/replace the ‘clips’ that hold in the various Telsa Model 3 and Model Y sunshades that are sold on Amazon. Typically, these sunshades are chinese made and are either missing their clips, dont…

Downloads
453
Likes
56
Rating
5

Sunset Flamingos

Sunset Flamingos

Downloads
399
Likes
105
Rating
5
P
PrintablesAlvomane

Sun Visor / Sunshade / Sonnenschutz / Sonnenblende compatible to BMW Connected Ride Cradle (CRC)

This sunshade is compatible with the original BMW Motorrad smartphone holder "Connected Ride Cradle". Unfortunately, there is no sunshade for the cradle from BMW, so I made one myself. Mounting Instructions: unscrew the screw at the…

Downloads
392
Likes
22
Rating
5
P
PrintablesArTpl

Sunset Cowboy (Figure/Statue)

I designed a Red Dead Redemption style model for you. It turned out to be a successful, high collectible value model. I printed it myself and it came out very nicely. I would be happy if you added it to your collection as well. Note: I…

Downloads
381
Likes
41
Rating
0
P
PrintablesDon Whitaker

Sunshade for DJI Mini 2 or Mavic Air 2 remote

I made a sunshade for my new DJI Mini 2 remote. It clips onto the rails of the phone holder and the top slips down over the top bracket. It's fairly secure though is does wobble a little since the sides are free-floating. Made to fit by…

Downloads
377
Likes
64
Rating
5
P
PrintablesJonas B

16-36 T Gear for grouw, adano, sunseeker drive unit

Gearwheel for grouw adano, sunseeker robotic lawnmower wheel gearbox. Print i PLA with 8 walls 40% infill, can be printed with a 0.4 mm nozzle and arachne wall generator. Alternatively a 0.2 mm nozzle.

Downloads
363
Likes
9
Rating
0
P
PrintablesJura Švébiš

Tropical Sunset Wall Art

Tropical Sunset Wall Art

Downloads
356
Likes
73
Rating
5
P
PrintablesCisco3D

Apex 2022 - Bad Boy Sunshades

A futuristic looking shade for your special event. Other Apex Shades Styles. https://www.prusaprinters.org/prints/105385-apex-03-sunshades https://www.prusaprinters.org/prints/25075-apex-2001-sunshades

Downloads
354
Likes
99
Rating
5
P
PrintablesLWC

"Steam Shade" Foldable magnetic Sunshield for Steam Deck

There is a thin gap between the frame and the display separating the whole frame from touching the display.. Use some thin felt or fabric to apply. Evenso I did not manage once to scratch the screen with the PLA printed Frame it cant hurt…

Downloads
351
Likes
140
Rating
4.67
P
PrintablesJeffrey Smith

Lowrance Hook 7 Reveal Sunshade

There are a number of sunshades for various Lowrance Hook Reveal models, but I really wasn't satisfied with them for one reason or another. Some of my dislikes were multiple pieces, flimsy looking, prevented angle adjustment, and most…

Downloads
344
Likes
18
Rating
0
P
PrintablesBassettDesigns

Bracket - Ender 3 Neo V2 for Sunshine Print in Place Dial Indicator

Bracket to adapt the Sunshine PIP dial indicator to the Ender 3 Neo V2 and alike head style.

Downloads
339
Likes
39
Rating
5
P
PrintablesTinnut

Space ship fleet for A Billion Suns

One of each type of the 13 types of ship required to play A Billion Suns: http://abillionsuns.space/ They were designed in Tinkercad back when I first read the beta rules for the game. I was aiming for a "Spaceship Train" kind of feel,…

Downloads
324
Likes
56
Rating
5
P
PrintablesCVABuck

Eotech Killflash / Sunshade Combo

I wanted a sun shade and killflash for my Eotech Holosights that was robust and could take a literal beating as well as stand up to heat concerns. Print with hex down, use tree supports. I recommend PC, Nylon, or HTPLA. Don't cheap out,…

Downloads
313
Likes
26
Rating
0
P
PrintablesEldenroot

Sunshade for rifle scope

Sunshade for a rifle scope. Moreover, it adds a protection for a scope lens and a nicer look :) Uploaded model (both versions) has these parameters: inner diameter: 57,0 mm outer diameter: 66,0 mm I use this sunshade for my rifle scope…

Downloads
309
Likes
35
Rating
0
P
Printablesryanchakajodda

Star Wars Unlimited: Twin Suns Initiative Tokens

This model contains the three initiative tokens needed to play Star Wars Unlimited. The first player token is the only token needed for 1 vs 1. The multiplayer “ Twin Suns ” game mode needs the “Plan Counter” and “Blast Counter”. These…

Downloads
301
Likes
26
Rating
5

Sunset with Palm

Sunset with Palm

Downloads
300
Likes
57
Rating
0
P
PrintablesFrankyD80

sunscreen / protector for double DIN Radio Citroen Jumper

This sunscreen / sunvisor fits the frame of my kenwood DMX8021DAB Radio in my Citroen Jumper and helps to keep the sun off my screen. Please feel free to adapt and modify for your needs. I printed it with PETG and a 0.4 nozzle at 0.2…

Downloads
299
Likes
37
Rating
0
P
PrintablesNiuthon

SunShade Visor - for glasses

This visor is very light, prints in one piece, and snap-fits to the arms of the glasses. Worn on the glasses protects your lenses from the direct sun rays, giving you clear vision of whatever is happening on the beach (or you can wear a…

Downloads
294
Likes
243
Rating
0
P
PrintablesZero-249

Sunshade support / Soporte parasol Fiat Siena 1.4

Replacement part for a Fiat Siena sunshade, the original part broke and I decided to create a 3D piece and print it Print Settings Printer: Vitofeli Grand X3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 40 Filament: Print…

Downloads
292
Likes
22
Rating
0
P
Printableslewosh

Garmin Zumo 660 Sunshade

No more hassle with rubber bands, velcro, tape or clamps to attach the sunshade to the zumo. Install once and it's ready for the whole season. A recess is provided to open the back without disassembly. The power button is also easily…

Downloads
291
Likes
19
Rating
5
P
PrintablesTerawat S.

Sunshine 101 Spectroheliograph (SHG)

Sunshine 101 is a Spectroheliograph (SHG) based on 2pcs of CS lens 75mm F/2.8. It was optimized for Sun photography on Hydrogen Alpha absorption (Ha) line. It's required some mechanical parts from standard telescope accessory and easy to…

Downloads
287
Likes
11
Rating
0
P
PrintablesJan Vitek

Suction strainer for Sunsun aquarium filter

This is a replacement suction strainer for the Sunsun HW-702B aquarium filter. The original can be easily damaged when used in an aquarium with turtles or other pets which are stronger than fish. It should work with other filters that use…

Downloads
280
Likes
31
Rating
0
P
PrintablesJesus Anchondo

Sunsword from Curse of Strahd

Recreation of the sunsword from the CoS book with a few personal touches. You will probably have to split it into 2 or 3 parts to print it easier.

Downloads
278
Likes
23
Rating
0
P
PrintablesBytor

Tesla Sunshade Clip

I needed more clips to hold up the sun shades for my Tesla Model 3. I created this simple copy of the clips that came with the sunshades. I printed them both flat (with supports) and standing up. Both orientations seem to hold up well.…

Downloads
273
Likes
16
Rating
0
P
PrintablesMeesterEd

Fallout Sunset Sarsaparilla Cap

I used Nuka Cola Clock by techoutreach for the cap shape but scaled it down and made the hollow in the back conical so its heavier. It'll still accommodate a clock mechanism 65x65x20 or smaller, but there's no hole in the back for…

Downloads
267
Likes
78
Rating
0
P
PrintablesMerto_Bohan

Sunshade for Ten Zone compound scope

Ten Zone scope is a great value for money scope for compound bow, but lacks some accessories. Integrated shade is only 16mm in length, which can be to short if you're shooting in the morning or late in the afternoon. This sunshade is an…

Downloads
266
Likes
22
Rating
0
P
PrintablesGeoff.

Clip sunshade Renault Scenic 3

Better to print it in PAHT-CF (or ABS) for better resistance to summer heat! (not in PETG or PLA)

Downloads
264
Likes
28
Rating
5
P
Printableslance greene

Transformers CW sunstreaker gunsword

a replica of the Transformers CW sunstreaker gunsword for transformer toys. Best printed on an SLA/DLP 3D printer. Check out all of my transformers guns! Transformers CW sunstreaker gunsword - https://www.thingiverse.com/thing:3693685…

Downloads
260
Likes
39
Rating
0
P
PrintablesMr Hubsi

Lowrance HDS 12 Sunshade

Sonnenschutz für das HDS 12. Zerteilen am besten innerhalb des Slicers. Zum Verschrauben habe ich Reduzierhülsen gedruckt welche nach außen drücken. Bei Fragen gerne melden.

Downloads
258
Likes
10
Rating
0
P
PrintablesMaxliCat

DJI Remote Sunshade

Remixed from RobSmo's https://www.printables.com/model/305355-dji-mavic-air-2-2s-mini-2-sunshade

Downloads
256
Likes
64
Rating
5
P
Printablesdbmeed

Universal ARD/Honeycomb Sunshade

Tested on only a handful of optics so far - please let me know if it works for you and what scope/optic you have used it on! This model is designed to be 50mm diameter - simply measure the diameter of your objective lens, divide by 50,…

Downloads
254
Likes
30
Rating
0
P
Printablesklimoma

sunrise (sunset) birds - wall art

sunrise (sunset) birds - wall art, easy to print

Downloads
246
Likes
58
Rating
5
P
PrintablesGuido

Sunshield TomTom rider (Made for 400, should fit any newer model since form factor isn't changed)

This model is made to be printed with flexible material. I used TPU and it fit well the device. No support needed, just print it as it is oriented in the STL. Enjoy your ride and be safe!

Downloads
241
Likes
16
Rating
0
P
PrintablesShakaStudio

Retro Car at Sunset - Hueforge Filament Painting

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA+ Creality CR Black Transmission Distance: 0.5 PLA+ IIID Max Navy Blue Transmission Distance: 3.6 PLA+ JAYO Meta Red Transmission Distance:…

Downloads
237
Likes
78
Rating
4.83
P
PrintablesJulian748

Ducato radio sunscreen

Print with support, Remove originak radio cover and replace.

Downloads
236
Likes
19
Rating
5
P
PrintablesGael Lafond

Little Miss Sunshine (Mme Bonheur)

I made this for my sister. We used to love the Mr Men and Little Miss books when we were young. Post-Printing Paint the white surface with a fine brush Glue a pin at the back to attach it to your shirt How I Designed This I downloaded the…

Downloads
235
Likes
5
Rating
0
P
Printablesmch

Nice Flo RE remote holder for car sunshade

Please print with ASA/ABS or any heat resistant filament. PETG is suffering during summer from heat inside car.

Downloads
230
Likes
25
Rating
0
P
Printablesoxygene

Netatmo Sunshield

The Netatmo outdoor module is supposed to be placed in a shady place with sufficient air flow for accurate readings. Ideally, it is placed high above the ground and not too close to buildings. However, it's not always easy to find a spot…

Downloads
224
Likes
36
Rating
5
P
Printablesmiak3D

Female Samurai at Sunset - HueForge

This is a filament painting of a female samurai at sunset. It was made by using Midjourney. Printed at 200x200 @ 2.80mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black Printbed…

Downloads
222
Likes
105
Rating
5

Potensic Atom/SE Sunshade (adjustable angle)

I designed it to be foldable for easy use and storage. I used ABS for this print because it is flexible. And you need to find a 2mm steel rod, 5cm long, to use in the joints.

Downloads
218
Likes
20
Rating
0
P
Printablesjq910

Mavic mini sunshade

A sunshade for the original mavic mini. No supports are needed and it takes around an hour to print both parts. As this is mostly friction fit, I have included 2 versions of the bracket with different tolerances. You can also adjust the…

Downloads
211
Likes
53
Rating
5
P
Printables3DPrintBunny

Sunshine pencil holder

Sunshine pencil holder Great gift It slots together and holds 9 pencils Print the sun standing up as it is in the stl. I printed the sun with supports touching base-plate to make it extra secure as I was printing fast. @3DPrintBunny

Downloads
204
Likes
79
Rating
5
P
Printablesklimoma

Lake, mountains , sunshine - wall art

Lake, mountains - wall art, easy to print

Downloads
202
Likes
44
Rating
5
P
PrintablesSimon

Clip for baby blanket (stroller sunshade)

This little clip attaches a blanket or towel to a stroller to provide some shade. The three models have a slightly different gap for one of the slots, such that they fit various strollers. I printed it in PLA with a 0.6mm nozzle at a…

Downloads
194
Likes
52
Rating
4.8
P
Printablesgiveen

D2 - Sunshot

I love this model and had to share it, I did have to make some corrections to one of the plates that just wasnt long enough. I included my Bambu X1C build file and printed it using generic black and white and a silk gold. I found that…

Downloads
188
Likes
43
Rating
0
P
Printablesbenxfactor

Mario Sunshine Sprite Tree Topper

I printed mine in a silk PLA print at 60% of the size I originally designed this for a much bigger tree. The reduced to 60% size fits perfectly on my 6ft tree. I hot glued the extender to the top part you can probably get it pressure fist…

Downloads
185
Likes
76
Rating
4.5
P
PrintablesT-bone

Garmin Striker 4CV Sunshade

Summary This is a remix of another design. This will fit the Garmin Striker Plus 4CV. Could use some minor tweaking but does what its suppose to do. Print Settings Rafts: No Supports: No Resolution: .16 Infill:25 Filament brand: PLA or…

Downloads
184
Likes
14
Rating
5
P
PrintablesOrionPax2005

Transformers Siege Sideswipe (or Sunstreaker) gun

Gun for Transformers Siege Sideswipe or Earthrise Sunstreaker. Has a 5mm peg so compatible with all modern 'bots. Modelled after the Masterpiece Sideswipe weapon and scaled down appropriately to fit Siege/Earthrise figures. Print Settings…

Downloads
183
Likes
25
Rating
0
P
PrintablesTinnut

Themed Fleet for A Billion Suns

This is my 3rd fleet for the game A Billion Suns. Edit 2021-April: Just replaced the Frigate as it was incomplete. Edit 2022-April: Uploaded repaired versions of the files. There's one of each type of ship and they're compatible with the…

Downloads
182
Likes
21
Rating
0
P
PrintablesLordFisch

SWU Twin Suns Token

I had to make the line thicker to be able to print the details with a 0.4mm nozzle, afterwards I filled the lines with paint and removed additional paint with IPA.

Downloads
177
Likes
5
Rating
0

Sunshade for Mybo Ten Zone scope - Pare-soleil pour scope Ten Zone

Sunshade for Mybo Ten Zone scope. You only need a rubber band to hold it in place Pare-soleil pour scope Mybo Ten Zone . Vous avez seulement besoin d'un élastique pour le faire tenir en place Print Settings Printer Brand: Alfawise…

Downloads
177
Likes
17
Rating
5
P
Printablesmiak3D

Heron at Sunset - HueForge

This is a filament painting of a Heron at Sunset. It was made by using Midjourney. Printed at 110x220 @ 2.64mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black Printbed Red…

Downloads
171
Likes
66
Rating
5
P
PrintablesKevink

Netatmo Sunshield Remix

The original model was very nice, but I decided to beef up all of the parts for a little extra strength which may or may not have been necessary. The following changes were made: 1) Beefed up the top and bottom rings, the pillars, and the…

Downloads
168
Likes
30
Rating
5
P
Printablesacetous

Tesla Model Y Sunshade Clip

To use the Fusion project, the Parametric Text plugin should be installed in advance. The gap dimension is then printed on the clip so that you can print several clips with different dimensions and try them out. The gapHeight parameter…

Downloads
165
Likes
40
Rating
4.67
P
Printablesdbmeed

Honeycomb Sunshade/ARD for Arken EPL4 4-16

Threaded to fit the Arken EPL4 4-16; may fit others, unsure if Arken uses the same thread pattern on different optics. This requires a well tuned printer. I was able to get good quality threads on my Bambu P1S w/.4mm nozzle. Printed in…

Downloads
158
Likes
6
Rating
5
P
PrintablesPinball_Maniac

SmartHome ESP32 SunSensor for HomeAssistant

This is a compact enclosure for a SmartHome SunSensor to control shaders via HomeAssistant using an ESP32-C3 WLAN Controller and BH1750 Sensor. The sensor is powered via USB C port. The enclosure printed on PrusaCore One in two parts…

Downloads
155
Likes
8
Rating
0
P
PrintablesMitja

SWU Twin Suns Token Box

Token Box that fits the official Gamegenic PREMIUM TOKENS PRO plus EXPANSION PACK and 18 additional 12mm dice. Uses six 6x5mm magnets to hold the lid. The diceplate goes on the bottom and the dice on top of it, pushing through the hole in…

Downloads
153
Likes
7
Rating
0
P
PrintablesJohnyDoe

Nolan N70-2X Motorcycle Helmet Peak Sunscreen Screw

This is a replacement bolt for a Nolan N70-2X helmet. The sun protection peak on top of the helmet uses a central M6 bolt made of plastic. The structure of helmet requiers for accessories to break off in case of a crash, therefore the…

Downloads
152
Likes
16
Rating
0
P
PrintablesFlMtbSteve

Tesla Model Y/3 Sunshade Clip with Sunglass Holder

Basically combined a sunshade clip and sun glass holder for those of us with sunshades and sunglasses in our MY's. I'm sure there are a zillion ways to refine this and further improve it but it seems to work. Any heat tolerant filament…

Downloads
149
Likes
21
Rating
5
P
PrintablesRobSmo

iPhone 12/13 Sunshade Hood for DJI Controller (and others)

Sun shade designed for iPhone 12 (and others when scaled - see note below). It provides better visibility in direct sunlight. As seen on pictures I tried both PETG and TPU materials. I think that TPU is better as it fits the phone nicely,…

Downloads
145
Likes
20
Rating
5

Car sunshade clip (Fiat Grande Punto)

This is a replacement for the clip that holds the car sunshade. The fourth picture shows the original part (left) vs the 3d printed one (right). Although made specifically for a FIAT Grande Punto , it can be expected to fit other car…

Downloads
145
Likes
12
Rating
5
P
Printablesrafez

CFmoto 450MT (IBEX) Screen Sunshade

CFmoto 450MT (IBEX) Screen Sunshade added supports best ironing of top surfaces make it look nice and smooth. 0.12 layer height may be to much but I printed it that way. 0.2 should be strongest, faster to print but of course layers will…

Downloads
141
Likes
7
Rating
0
P
PrintablesDecorartor

Charming Bloom Vase — Sunshine Yellow

The Charming Bloom Vase brings brightness and joy into any space with its radiant sunshine yellow tone. Its geometric diamond texture creates a playful yet elegant surface, reminiscent of blooming petals captured in a modern sculptural…

Downloads
138
Likes
12
Rating
0
P
PrintablesTickTock

Tesla Sunscreen Clip

Extra clips in case you lose some or just want to secure it better. I found that having two more (six total) works well - two on the front edge and two on the back edge since those edges bow a little. Print instructions 3 perimeters no…

Downloads
136
Likes
33
Rating
5
P
Printablesmiak3D

Island at Sunset - HueForge

This is a filament painting of a beautiful island at sunset. It was made by using Midjourney. Printed at 119x200 @ 2.88mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black…

Downloads
128
Likes
53
Rating
5
P
PrintablesVagner Mazon

Garmin striker 4 sunshield (tapa sol)

creditos ao original https://www.thingiverse.com/thing:2962608/comments

Downloads
127
Likes
8
Rating
0
P
PrintablesGMPatrick

Samurai Sunset HueForge

My 1st original HueForge model. It's a 4 color print using Esun filaments, however, you can use any filaments you choose as it's not a complex model. I have also included a base model you can mount the print to. It makes the process of…

Downloads
127
Likes
51
Rating
5
P
PrintablesKeatonKw

24" Lego Wreath with Suns, Bees, and Flowers

June Lego Wreath! Another version of the Lego Wreath. This one is 24" in diameter with 8 pieces. Print one with the hook, so you can easily hang it. Check out my page to see the studs I designed for the other months.

Downloads
126
Likes
23
Rating
0
P
PrintablesYazkili

Renault grand scenic hook for rear sunshade

Renault grand scenic hook for rear sunshade Print Settings Printer: Custom Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 100 Notes: Support only to bed. Print as default downloaded orientation to maximize strenght. Category: Automotive

Downloads
124
Likes
13
Rating
0
P
PrintablesOrsonWorkshop

Fiat Panda Sunshade holder/support replacement

Small file for sunshade holder in Fiat Panda. I recommend printing in PET-G due to temperatures in summer. It is compatible for sure with Fiat Panda I. let me know if it is compatible with other car models.

Downloads
124
Likes
8
Rating
0
P
Printablesgeorgmierau

Ray-Ban Meta compatible side sunshield

As requested by a Reddit user. Should fit the Ray-Ban Meta sunglasses. A prototype, work in progress!

Downloads
122
Likes
10
Rating
3
P
PrintablesZach

Binary Sunset Bookmark

A detailed Star Wars Episode IV inspired bookmark, designed to be super thin. No page damage, no hassle, just a cool design. I'm a big fan of the shadows this one casts! Test printed using an FDM printer. As I'm going for very thin…

Downloads
122
Likes
34
Rating
5
P
PrintablesHrvTagz

Bogg Bag sunscreen/bug spray bottle holder

Bogg bag type attachment to hold bug spray &/or sunscreen. Tight snap, but the spray bottles can also just slide in - it can be installed horizontal or vertical which ever is the best alignment for the holes. This uses a screw-type…

Downloads
121
Likes
39
Rating
5
P
Printablestecnoculebras

Wedding under the Sunset (You And Me) lightbox

COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…

Downloads
119
Likes
39
Rating
5
P
PrintablesStuart800

3D-Printable Filament! - Multi Color Filament from SunShine

First of all, big thanks to SunShine for the outstanding idea of printing multicolor / multimaterial filament yourself. Since the bed on my first printer was too small, I reduced the 200 mm filament spiral to 168 mm and 16 grams. It was a…

Downloads
119
Likes
15
Rating
5
P
Printablesuhltimate

Sunshade Stroller Clips

I use these clips on our stroller to protect our child from the sun. So far, I have printed numerous clips for friends as well. I am sharing the design here. Enjoy! Protect your little one from the sun with this innovative 3D printed…

Downloads
117
Likes
46
Rating
4.75
P
PrintablesSergioEduP

Renault Laguna rear sunshade hook

A simple hook to replace a broken one of a Renault Laguna rear sunshade. Not an exact replica of the original , probably best to print in a material that is more resistant to heat like PETG or even ABS since it gets pretty hot inside cars…

Downloads
117
Likes
6
Rating
4
P
Printablessunshinemakes

Nice Comb by sunshinemakes

Comb your hair with the comb from sunshinemakes. Many thanks to my followers and to everyone for the 1000 downloads:)

Downloads
112
Likes
5
Rating
0
P
Printablesitalianmaxx

Hueforge - Tropical Sunset

Image by Midjourney Hueforge 4 colors black red yellow whitematte a small 10x10cm file just to try Hueforge.

Downloads
110
Likes
31
Rating
5
P
Printablesmiak3D

Sunset Island - HueForge

This is a filament painting of a beautiful sunset on an island. It was made by using Midjourney. Printed at 133x200 @ 2.8mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black…

Downloads
109
Likes
46
Rating
0
P
PrintablesMarik Komarik

Yamaha FZS 600 (Fazer) dashboard cover with sunshade.

Update: Added speedo sunshade! A fairly simple model to cover the dashboard and provide some protection from the sun, when my clear windscreen arrives. Fit is perfect slide on, won't come out but probably won't stay on either. STEP files…

Downloads
108
Likes
10
Rating
0

Desert sunset

Desert sunset

Downloads
104
Likes
52
Rating
0
P
PrintablesLZ1FLY

Ikea Schottis Sunshades Clip

Uploaded two versions - 1.0mm and 1.2mm. The site renamed the stl files to 10mm & 12mm which is not correct. Print instructions I'd suggest to use PETG, PLA is not UV resistant and will be "baked" very quickly.

Downloads
102
Likes
13
Rating
5
P
PrintablesNinomalbinho

Sunset Wall Art #1

A great Wall Art of a sunset on the sea. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker

Downloads
101
Likes
23
Rating
0
P
PrintablesNDS RnD

Sunset Flamingos

The original model by mishkin2 in this link has been slightly modified to compensate for a few weak points. Printed for gifting (as a wall decoration). 3D Printer: Elegoo Neptune 3 Pro Filament: Porima PETG Black Nozzle: 0.4mm Slicer:…

Downloads
99
Likes
30
Rating
0
P
PrintablesDaniel Bass

Netatmo Sunshield arm for brick wall

Created my own attachment arm to attach the Netatmo Sunshield to my brick wall.

Downloads
98
Likes
12
Rating
5