Counting matching models…
I made this because i fount a good deal on Supernova E3 Tail light, I could not find any mount so i made one, still experimenting with it so very unsure about its strength. installation is easy with the bolts provided with the light, all…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
Since I did not like the original mount for the high beam button, I created one where the button sits on top of the bar. Suitable for 22mm bars. Use a M3 screw to tighten the mount to the bar. Enjoy.
I have a Supernova Mini 2 on my bike that came originally connected to the step via Bontager's Blendr system. This unfortunately means that I have nowhere else to mount it if I choose to swap my stem. Supernova makes this exact part out…
Use this at your own risk and caution! I needed some specialty jaws for holding a finished workpiece without damaging the surface. For this, I designed these special jaws to an exact fit. These jaws fit on the Teknatool SuperNova Series…
Ist aus der Not konstruiert worden, dient nun als Verlängerung meiner Lampe Supernova M99 Pro, weil mein Nyon schon recht weit vorsteht. It was constructed out of necessity and now serves as an extension of my Supernova M99 Pro lamp…
Original Adapter kostet 20.- und ist aus Alu.
The initial goal of this project was to create a mount to attach a Supernova E3 Pro 2 light to the main tube of my Titanium Mini Max. However in doing so with a simple mount placing the light parallel to the horizon I noticed the light…
The original file required M2 screws, which I don't usually use, this version relies on all M3. It also has cutouts for embedded nuts. Both files need to be printed twice, mirror one copy in your slicer.
A simple mount to install a Supernova V521S front light on a normal bike light support (width of 8mm, M6 screw). Use the provided screw that comes with the light. Print on the side. No support required. Printed mine in ASA with 0.4mm…
Ich habe für die Montage des Supernova TL3 Max Rücklichtes diesen Adapter konstruiert. Für die Montage am Standard Gepäckträger werden zwei DIN 912 M5x20 Schrauben benötigt. Zum Schutz des Gepäckträgers habe ich Unterlegscheiben aus…
Mount for the Supernova TL3 Pro (https://supernova-lights.com/products/tl3-pro) rear light to mount it on a Thule Chariot bike trailer. I mounted two of those lights which include a braking light on the trailer and connected the power to…
A saddle mount for the Supernova TL3 backlight.
Display NASA.gov's Tycho Supernova Remnant (or similar models) as a captivating glowing mood lamp. Space at the bottom for 4xAA batteries (or alternative battery solution) and a USB-C port, so the lamp can be powered by either a USB port…
Supernova Prime for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • snv-1-4.stl…
I could not find a suitable mount for my Supernova E3 Rear light, the ones that are out there are intended for the rack mount lights. This mount is inteded for the E3 light that mounts to the seatpost, and keeps the stading orientation of…
As far as I'm concerned, it's a much nicer / cleaner looking alternative to the original pricy options by supernova. It attaches with cable ties. the curvature is sized to allow a piece of old inner tube to be placed between the seat post…
The front light shines on the bag of the front luggage carrier. The light could also be installed under the luggage carrier, but then it doesn't shine on the path when turning. The extension bar makes the light shine over the bag. Use M6…
I made this ring to adapt the diameter of the front rack of my Omnium mini max to mount the Supernova Dynamo Light Set (Front Light: E3 Pure 3S ). Printed with TPU works well
This are two "clones" (so to speak) of the Supernova Taillights. Both the smaller and the bigger M99 version. I know that Supernova uses some custom LEDs to get street legal, but in the end a small row of LEDs will not really blind anyone…
This is a mount I designed for the rear of my Mario Retro-Belt Fatbike (may fit other bikes with a similar frame). It enables you to mount the amazing Supernova M99 pro rear light and a left and right indicator (should fit most but I used…
Description This striking, tall bookmark features a high-contrast black and white illustration of a dramatic cosmic event. The centerpiece is a supermassive black hole with its luminous accretion disk, dominating the deep space…
Description Author/Origin : RIKEN/G. Ferrand, et al & NASA/CXC/SAO/A. Jubett, N. Wolk & K. Arcand Relevant Mission : Harvard-Smithsonian Center for Astrophisics Date Added : July 19, 2021 GitHub Repository : Tycho Supernova Remnant
Initial Situation & Development: The mount for the Supernova high beam switch doesn't provide enough counterpressure to turn the high beam on or off without twisting it. It was important to me that the adapter be positioned as close to my…
Counterweight designed for 5A yoyo play. This counterweight is only for the bravest. Wear a helmet, this will hurt you for sure. The volume is 7.857 cm3, check your material's density and your infill percentage to get an estimate of the…
In my quest to make the Necchi Supernova into my ultimate zigzag sewing machine, I decided to add a thread cone holder to the machine's top. It prints in three pieces, without support: A double peg piece fits the machine's spindle holes…
scientific simulation informed by observations
supernova e3 pure 3 Dynamo mount for Velo Orange Porteur Rack made this bc i couldn't find anything i liked online. I'm not super experienced so very uncertain about its strength. Installing is very simple all you need is a few zip ties…
Handlebar holder for SuperNova M99 lamp, nice addition to my Tern HSD compared to the stock headlight. Addition also included a Supernova brakelight, both bought as a bundle from SuperNova (Germany). Model recreated from similar model,…
On February 23, 1987, astronomers noticed a new source of light in the Large Magellanic Cloud (LMC), a small satellite galaxy of the Milky Way. Soon, scientists realized that this new beacon was, in fact, a spectacular explosion caused by…
Supernova TL3 does not have its cable in the center. This model extends its body and gives it GO PRO mount.
With this thing you can mount a Supernova - taillight to your Brooks B17 saddle. Category: Sport & Outdoors
In order to cover the bright light of a supernpova bikelamp during daytime PETG - Magnet hole
Description This striking, tall bookmark features a high-contrast black and white illustration of a dramatic cosmic event. The centerpiece is a supermassive black hole with its luminous accretion disk, dominating the deep space…
The Queen Meet the royal Queen Supernova Marvin. A model that looks like the top level Star of Design Level 9 Printables badge but with an added crown. I took inspiration from a very similar model by Triple G Workshop, however I created…
support de lumière arrière pour éclairage sur dynamo feu Supernova TL3 Mini première impression en PLA suite a une chute importante je réimprime en PETG
Models that I created for my Earth & Space science class. I printed in 0.2 mm layer heights with 10% infill. The Star Core Collapse has arrows with the inward crush of gravity on the layered core. The Core slice shows a cutaway zoomed in…
Hawkeye SuperNOVA Regular Flashlight Adapter Description This is a simple flashlight adapter to connect a generic flashlight to a Hawkeye SuperNOVA Borescope. The original light source was damaged by leaking batteries. This adapter adapts…
One piece supernova style fork and spoon holder. for anime etiquette . .
Printed in TPU
Durchmesser Sitzrohr/ diameter of seat tube: 32mm Winkel/ angle: 15° Benötigt Teile: heat set insert M3x5x4 (voron) M3 Zylinderkopfschraube Material: PETG oder ABS Schichthöhe: 0,1 mm Die hochgeladenen Modelle unterscheiden sich in der…
I need to mount this little light to my Mudhugger rear mudguard so I made this model. v2 is here: https://www.printables.com/model/1751103-supernova-e3-tail-k915-mount-v2-for-50mm-placing Get v1 if you want to print it easier and get v2…
This is v2 of my Supernova tail light. Absolutely different geometry for mount your light on flat surface. v1 is here: https://www.printables.com/model/1750523-supernova-e3-tail-k915-mount-v1-for-50mm-placing Get v1 if you want to print…
Design for my setup with Profile Design aerobars. I wanted to put the light at the top so it does not get soiled so easily during the winter months. Also it is close to the power bank in the bag below. Secured with 4x5mm zip-ties,…
Hawkeye SuperNOVA Regular Flashlight Adapter Description This is a simple flashlight adapter to connect a generic flashlight to a Hawkeye SuperNOVA Borescope. The original light source was damaged by leaking batteries. This adapter adapts…
With this thing you can mount a Supernova - taillight to your Brooks B17 saddle. Category: Sport & Outdoors
Durchmesser Sitzrohr/ diameter of seat tube: 32mm Winkel/ angle: 15° Benötigt Teile: heat set insert M3x5x4 (voron) M3 Zylinderkopfschraube Material: PETG oder ABS Schichthöhe: 0,1 mm Die hochgeladenen Modelle unterscheiden sich in der…
Ist aus der Not konstruiert worden, dient nun als Verlängerung meiner Lampe Supernova M99 Pro, weil mein Nyon schon recht weit vorsteht. It was constructed out of necessity and now serves as an extension of my Supernova M99 Pro lamp…
