403 models
MacBook Pro Cable Organizer: Keep Your Charger Neat and Tangle-Free September 29, 2024 Update: Added Cable Organizer compatible with thicker 4,5mm diameter braided cable. Product Description: The MacBook Pro cable organizer clip is a…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
I have built a 4WD car and programmed it to be controlled by phone. However, it didn’t look quite right, so I designed a new body. Since my printer isn’t large enough, I scaled it down slightly (to 97.5%) in PrusaSlicer. The result turned…
Print approx. €4.11–€5.03 excl. taxPreliminary estimate for PETGSource material: PET
Hygrometer - https://amzn.eu/d/1nIj0yG Most of the Amazon ones are the same, as long as the dimensions are 48mm x 28.6mm Magnet - https://amzn.eu/d/4x4VSJl 3 x Magnet Size: Dia. 6mm x Height 3mm Hygrometer to be close to my plexiglass…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Ho Ho Oops! 🎄 Imagine a Christmas tree so incredibly knotted/tangled that even Santa gave up trying to fix it - and that’s exactly how this design came to life! A tree full of loops, twists, and knots that look as if one of the reindeer…
Print approx. €2.67–€3.27 excl. taxPreliminary estimate for one variant
Avoid tangles and knots the next time your filament retracts! This is an eco-friendly, low-footprint spool buffer for rigid filaments like PLA, PETG, ABS, etc. Using just 10 meters of filament and cardboard from the filament shipping box,…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Une décoration à l'effigie de ff7. A decoration bearing the image of ff7
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
Tangle free 64 AAA battery dispenser. On my way to another (bigger) project about battery management, I thought you might like this battery holder or dispenser which stacks the batteries tangle free, which most holders I tried so far…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
Remix of Anti-tangle Gravity spoolholder for MMU2S by @Forfelet, for bigger nuts (76mm)
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for PETGSource material: PET
Učebná pomôcka. Pre úsporu materiálu je 5% výplň.
This is my dream filament clip, designed to prevent the end of the filament getting tangled in the spool, being easy to remove and add, and it doesn't pop off when you put the spool away because the design sits inside the spool itself. To…
I have tweaked my original round bases to make them easier to use. I also made round (cavalry) and oblong (cavalry) bases. I am using 10x5x1mm parallelepiped magnets that I buy from Supermagnete Improvements: Stand for magnet underneath…
Hi, I designed a desktop stand for your MacBook, when using a monitor. fits: MacBook Pro 14” MacBook Pro 13" 2016-2021 Should fit the Macbook 16” if it fit the 14” -Settings recomendations: -Print with PLA/PETG, minimum 3 perimeters. -30%…
tissue box · rectangle & cube minimalist design that comes in two options, rectangular and cube, for two popular tissue brands update / US Kleenex size has been added (x:114 y:114 z:131) as STLs important · make sure that: your build…
EDIT: Created a divided rectangular bin, with removable dividers as well. After duplicating the Milwaukee Packout Low-Profile Organizer bins , and creating dividers and a modified low-profile square bin that can go where the low-profile…
Inspired by traditional Japanese design, this planter features an elegant Kumiko pattern, complete with a drip tray, sturdy legs, and a decorative outer shell. The plant's water tray has a small hole, making it easier to check the…
My Messor barbarus ant colony was growing very fast, and I was housing them in several small formicaria, so I decided to make an extra large formicarium for them. Once I connected the new nest, they quickly started exploring it and after…
Safely store and protect your cables with ease, ensuring they stay neatly organized and tangle-free.
You will need a 608 bearing (skateboard bearing). This can be purchased, salvaged or printed. The rest of the parts can be printed without supports. everything screws together. Once everything is screwed together, place your yarn on…
you guys hit 500 so i am working on v2
I created this rectangle in TinkerCad to baby step my Z offset using the Tune function in Marlin. Continue to lower your Z offset until the lines of filament make a continuous smooth layer.
Avoid twists and tangles by winding with a figure eight pattern. Scale print as desired. I recommend PETG over PLA to avoid warping with usage in hot weather. October 2022: revised model to remove one hole (the original version broke…
What makes it special This rectangle version stands out in my hand because of its straight sides and the way the inner piece runs through it. It is still the same kind of fidget I enjoy, just in a shape that looks sharp on a desk. It…
its a rectangle of all of your rectangle needs
I love lithophanes and decided to make this Tangled lamp for my friends kid. It looks amazing all lit up. I made the file using lithophanemaker.com and bought the lamp base from amazon. Base- https://amzn.to/2PZ51Kl Filament-…
Parametric design (OpenSCAD) added! This calibration tutorial is also described here ! The model works with the Customizer panel of OpenSCAD , a free 3D CAD modelling software for creating solid 3D CAD models, which is very powerful for…
From the movie “Tangled” comes the crest of the Kingdom of Corona--the Sun Circle Gold Medallion. All parts printed at 0.2mm layer height. I designed a 0.18mm gap between all parts that fit together based on the tolerances of my printer…
This minimalist rectangle design showcases the essence of geometric simplicity. Perfect for various uses, including as a decorative piece, a base for further customizations, or for educational purposes in 3D design learning. Its clean,…
Why was this Designed? This design was remixed to stop any filament from jumping off the spool roll when it spins on my low-friction spool roll holder while feeding through my extruder-stepper. Credit where Credit is Due! I liked the…
Thank you for downloads, likes… Enjoy !
Safely store and protect your cables with ease, ensuring they stay neatly organized and tangle-free Print time : 44min button | 1h49min Case | 1h cap (you can also simply cut a 60x60mm or a 2mm plywood) The setting i used (trust the…
I created square and rectangular versions of this model: https://www.printables.com/model/155938-parametric-mesh-screen-round OpenSCAD model that I wrote is included so you can re-work the parameters and customize your screen to print…
A rectangle that can be used for various tasks.
Dragon Tangle. Added .6 mm offset to entire model due to thin details. Fixed mesh. Smoothing and sculpting on areas that turned into bubbles during offset.
This botanically themed trellis can be used in two different ways – either flat, or rolled into a tube. The Flat version is 1mm thick, but can be scales in the Z direction if you want it stiffer. The Rolled version is 0.6mm thick,…
This is a remix of this awesome spool holder made by Graham Watson here is the original design https://www.thingiverse.com/thing:2479238 I have also added the Anti fold bar made by GM…
Update 12/05/22: A firmer spring has been added if the original spring is not enough Watch me assemble it here: https://www.instagram.com/reel/CZurb91lTCE/?utm_source=ig_web_copy_link Anti-tangle bearing spool holder for Ender 3 V2 (and…
Put an end to your filament end getting tangled up in the loose outer wraps of your spool. Assemble this clip onto your brand new spool and leave it there until the spool is finished. It rides along with the spool while you print, then…
PLA+ print 68 bed, 210 nozzle, slow 1st layer speends and brim of 9 lines for bed adhesion
This ornament can be printed flat with an ams or filament changes at certain layers. if printing by doing filament changes follow these heights: start with black @ 1.2mm change to white @ 1.6mm change to red @ 2.0mm change to green @…
Printed with pla, with layers of 0.1mm The purpose is to have a guide to avoid tangles and to secure the filament in the spool when not in use. Basically, it replaces the piece of cardboard that comes in the spool with the extra function…
This modern square planter will look great growing your herbs or succulents. You can sit this planter in your kitchen as decoration, and easily cut trimmings from your herbs. The download has two files that let you choose whether you'd…
This is parts for 110x55mm rectangle ventilation tubes. Orientation for print will depend on printer and you may have to experiment with support. Here is an example of a duct angled 45 degrees for better print result for overhangs. See…
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is a…
I designed this mount after printing a few i had found on here but didnt fit (too big) or the orientation of the hose holder wasnt correct inspiration came from this model…
This mod is a remix of 3 different objetcts to be mounted ontop a Voron 2.4 or Voron Trident or any 2020 Extrusion based printer. the Voron Switchwire spoolholder the ERCF Carrot Patch Fbeaukmi's 608ZZ Spool holder. Assembly should be…
You need a spool holder, and you need it fast! This minimalist spool holder prints in minutes, not hours. Just jam 608 skate bearings (you must have some of those lying around) onto the ends of 2 Bic pens (check the sofa cushions) and…
EDIT 6.April 2021: I added roll consist of 2 parts roll_hole.stl roll_slot.stl You need 8x 8x16x5 ball bearings I added all files needed for assembly. Original comment: This remix of the graham01 anti tangle spool holder…
This version is 114 mm tall and is intended for outlets requiring a rectangle hole in the center.
Thank you for downloads, likes… Enjoy !
Prevent tangle Ajustable for all spool =< 1kg (Prusament, Arianeplast, Grossiste3D, ICE, Amazon, …) 2 versions: bottom only or entire spool I recommend you the "entire spool" version Default 0.2mm Speed - PETG
NEW Version. Cosmetic cleanup and sligthly better modelled. This is parts for ventilation fitting 110x55mm rectangle ventilation ducts to 100mm Ø ducts. Orientation for print will depend on printer and you may have to experiment with…
This device keeps the filament from slipping off the spool when the printer’s gantry moves down toward the print bed. Instead of falling off, the filament simply gathers up between the guide and the runout sensor—without getting tangled.…
This is parts for 110x55mm rectangle ventilation tubes. See also other 110x55 parts https://www.printables.com/model/840511-rectangle-ventilation-110x55mm-angle-90-degree-upr And a 90 degree horizontal to verticla twist module…
An oblong rectangular container. No supports needed.
Attached STL is for 196mm base and 204mm diameter at rim and 22mm tall. and the largest my Prusa would allow (base Diameter.) The sizing can be changed to suit using the spread sheet on the attached FCStd file. Decided to add the Square…
Box to store codenames pictures in, 3x types of cards and the plastic card holder. This is for the rectangular maps.
After the first "cursed" holiday ornament I made, I wanted to continue modeling more in the same vein of design! So I came up with the next ornament apart of the collection, the tangled spool! This design is printed in 3 parts that…
Click here to see collection containing more gardening related designs by 3D Printing Bug. Give your plants a stylish and sturdy support system with the Garden Trellis - Rectangle Series ! Designed to provide both function and aesthetic…
Cutter Rectangle Measures: 40mm x 10mm Cutter for: fimo clay polimer clay cookies… Printing Properties (Dynamic Quality): Printing time : 18min Filament use : 4 g, Material: PLA or PETG Layer: 0.16mm Infill: 10% Supports/Brims: NO
I modified my Ender 5+ to a direct drive and decided to mount my filament to the roof above the printer out of the way. however occasionally the filament would unwind when then head went back towards the spool. So i decided to develop…
Rectangle tray to collect water and dirt
After scraping my ultimate top mount spool holder project I reversed back to the original side mounted spool holder. But I had to throw out Creality's nonsense anti tangle filament rack solution. I experimented with this part and it works…
0.20 mm layer height 0.40 mm nozzle infill as you see fit, I went with 30%
This version is 125mm tall and is intended for outlets requiring a rectangle hole in the center.
Those simple boxes are both practical and pleasing to look. Somewhat stackable - very slight draft angle, they come in 2 different aspect ratios: 100x100x90 100x115x75 The can be scaled in your slicer to create smaller or larger boxes.…
The Large Rectangular MMS Containers! Inner Dimensions: - 4" x 5" Height Options: - 2.5" - 4" - 5" Large Rectangular Containers for your modularity needs! Another very basic module, but that many more options for exactly what you need!…
Retro styled, rectangle ashtray for Iqos heated tobacco sticks. The lid should fit just right and the hole lets the terea/heet slide smoothly into the ashtray. Printing: You can print the ashtray body and legs with 0.2 layer height.…
These are for calibrating the horizontal expansion setting for your slicer. I recommend to use standart cure settings for 0.2mm layer height, 215/55 PLA. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…
This is my first try on creating a chainmail type fabric. Prints fairly easy, if you have difficulty with first layer, you may want to size it up. I created it in Onshape, you can find it here…
Pascal Tangled After watching Tangled for the first time recently, I had to make this cool little dude! Angry Pascal 2D Art style with a base Printing Parameters: Preffered nozzle & layer width 0.4mm or smaller Filament change at 2mm…
These are very simple spool tags. They have only two jobs: Stop the filament tangling while in storage Make it easy to see the filament type Vacuum bag safe There are tags for most filaments, with GF, CF, etc. While the letters do NOT…
This strange looking model feeds through the filament to prevent the filament spool from being tangled and trapped during printing using gravity. It applies constant pressure between the filament and the spool to make loosen the tension…
This anti tangle clip is for use both during print and storage. When printing, this clip will stop the filament from jumping out of the spool by guiding the filament continously and preventing it from achieving any elevation. It works by…
Guys lets make this thing blow up pls download it it is only 600 bytes
This model utilizes the gate from https://www.thingiverse.com/thing:1008943/files It was a test to figure out how to reverse engineer the holes and such need to make it work in openscad. At some point I will post all the openscad stuff in…
The design on this cup was generated from an AI prompt in Microsoft's image generator. As I did with the peace symbol , I manipulated the image file to create a steriolithography file. I was hesitant about printing the model because the…
Optimized OrcaSlicer profile for the Anycubic Kobra 2 Max with custom start/end gcode, calibrated pressure advance, and tuned flow ratio. Tested daily with Elegoo Rapid PETG on a stock 0.4mm nozzle. Unlike other K2 Max profiles that just…
It's a rectangle for adding a base to remixes of models or just need a base for your new design.
🇺🇸 ENGLISH VERSION Make classic Linzer cookies with this Rectangle Cookie Cutter! Designed for precision, this cutter is perfect for baking Linzer cookies, biscuits, fondant, and more. The rectangular shape allows for elegant and creative…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Filop10CZ's…
This strange looking model feeds through the filament to prevent the filament spool from being tangled and trapped during printing using gravity. It applies constant pressure between the filament and the spool to make loosen the tension…
This tool helps keep bed sheets from tangling during drying. It's 3D printed in TPU, making it flexible enough to withstand the tumbling and heat of the dryer. Simply insert a sheet corner into each of the side holes and place the center…
Features: Includes an extra 3rd roller on top of the spool. This prevents the filament from hopping over the edge of the spool if there is slack, which would lead to the filament getting tangled. This was inspired by Mark Rehorst's spool…
Created using a parametric keychain maker on the Green site. Show the world you survived the spaghetti nightmare of the Iron Tangle featured in "The Dungeon Anarchists Cookbook" by Matt Dinniman
NEW Version. Cosmetic cleanup and slightly better modelled. Conic fit for Ø 100mm duct. This is parts for ventilation fitting 110x55mm rectangle ventilation ducts to 100mm Ø ducts. Orientation for print will depend on printer and you may…
Pascal zaveseny is error ( prusa slic3r can do it ) Chameleon inspired Tangled
It's too simple I designed with Tinkercad. I use these to level my furniture or when I'm designing something and need to think about thickness of the wall, this is the good tangible example pieces. This is the SAE version. I also designed…
The MMS Small Rectangle Containers! - 2.5" - 4" - 5" Inner Size is 1.5". A basic module, but one that adds even more variety for you to meet your exact modularity needs! You'll want some MMS modules to mount with! -=|Moonbeam Mounting…
Simple rectangle shape I use to calibrate flow, ironing, different infills
Outer Width: 4" Interior Width: 3.6" Height: 4.5" We kindly ask you to please not sell printed versions or copies of our 3D models without being a member of our Patreon. You can join here: https://www.patreon.com/WyattIndustries
Designed this bar to prevent the great “Mega Anti-Tangle” spool holder folding all the way in or out when try to switch spools. This bar keeps the arms open and prevent them fall apart so you can more easily switch in a new spool. You…
![Adjustable Anti-Tangle Filament Tensioner [Remix]](https://media.printables.com/media/prints/637029/images/5037352_9c3fb6cf-720c-42c5-a73f-4767246e6123_562e9791-2422-45b1-b5b9-05aae57ce300/large_display_023b1127-d30e-4dd4-83f8-b19e5e002813_637029.jpeg)
