4,731 models
Prusa Steel Sheet Holder for 2, 3 or 4 steel sheets. Print instructions Print in PETG or PLA with 0.3 layer hight and 5% cubic infill. Added a new, wider steel sheet holder for 2 sheets.
The Steel Ball should be rotating in your palm! In this model, this is achieved with a single 608 bearing located at its center. Note: if this seems like fun to you, you might also like the seasonal Easter Steel Egg . Printing The whole…
Pittsburgh Steelers 1st Layer White 2nd Black 3rd Yellow (made thicker) 4th Red 5th Blue
V2 is now available. Stackable tea bag holder Dimensions: 6.8 cm wide, 8 cm deep, 10 cm high +++++++++++++++++++++++++++++++++ Stapelbarer Teebeutelhalter Maße: 6,8 cm breit, 8 tief cm, 10 cm hoch
Remix of https://www.thingiverse.com/thing:4268067 which is not currently available on Printables. Modified to hold a Teensy 4.1, two spare microSD cards, and with an added label recess that can be revealed by prying off the front plate .…
Remix of the model from grooveup - I just needed 3 slots to hold my build plates.
Modified the main parts of the Dentures by iplop and NotThatDusty to also have some openings on the bottom and top so the whole thing can have magnets on the outside as well and stick to metal surfaces when the jaws are fully opened. I…
Drew up and created a 3D, multi-color, version of the classic 90s cartoon Teenage Mutant Ninja Turtles logo. Printed with Hatchbox Red, White, and Green and Prusament Galaxy Black PLA filaments. Drawn in Affinity Designer, imported as a…
Don't like your groceries list being obscured by huge refrigerator magnets that are to flat to grab them. Maybe give this quick, one coloured print a try and finally get rid of those last 40 cm of your old Prusament Galaxy Silver spool!…
Vampire Teeth – 3D-Printed Halloween Accessory Perfect for your vampire costume: these lightweight, reusable vampire teeth are 3D-printed and, with PLA Glow , deliver a spooky glow-in-the-dark effect. Easy to print, quick to assemble, and…
EN: Purely functional simple EZ to print hairband, nothing special. CZ: Funkční, jednoduchá čelenka, tiskne se OK.
Pumpkin lamp for table decoration e.g. on Halloween. !!Attention only use with electric tea light!! The tea light I use is 45mm by 45mm by 45mm in dimensions and fits easily. Works absolutely great and looks great. I uploaded two variants…
A knob for your printer, to turn round the elegant way
Holds up to 5 sheets Name of each sheet readable → easy selection Sheets safely embedded in the holder with stops → no sliding out Small footprint in desk space and in filament usage L x B x H = 265 x 90 x 276 mm Printed with HF nozzle…
Prusa Steel Sheet Holder for 2 steel sheets Software PrusaSlicer Filament: PLA or PETG File: .STL or .gcode Supports: Everywhere Infill: 20% Or Recommend: File .3mf (3D Manufacturing Format) Thank You ;-)
Modified spoon, fork, and knife models from Thingiverse for people who wish to loose weight for the summer.
This is a easy print. Default PETG settings 15% infill. Place top down and go. They pop into track and can slide under vise or other items. I included model file if remix or modification is desired. Enjoy!
Dieser Halter wird an einer beliebigen Tasse eingehängt und kann neben einem Teebeutel auch Zucker, Kekse oder andere Dinge für das Servieren aufnehmen. Oder dann den benutzten Teebeutel aufnehmen. Der Halter steht auch stabil neben der…
Same outer dimensions as the original knobs on the KO II. This knob fits the slider without using unnecessary force. This model is tried with PLA on a Prusa Mini. Printed with 0.2mm layer height, 15% infill, Prusament PLA Galaxy Silver.…
teethBrushed The clean, edged curves give your bathroom a new and fresh expression. Perfect for the entire family. Daily teeth cleaning can be complete with our integrated floss stick section. Sometimes the smallest changes can make a big…
You need for each arm 5 M4x14mm nuts. It is recommended to use supports on plate only.
This holder fits Prusa MK2/MK3/MK4 steel sheet size. It is not compatible with Prusa Mini or XL steel sheets. For mounting options, please see the the original model . Please note that you don't need to mirror this model whether you want…
New 3d printing project Complete! Steel shot filled, multi-color, sphiricon shaped Gonngi stones! What's Gonngi you ask? It's a Korean kids game like jacks. Played with 5 "stones" you toss one up and pick up 1-4 stones then catching the…
This is the same great design, but without the slots for the mini sheets. It also has a wider base for stability, a cutout to save materials, and sealed slot-bottoms so the sheets don't scratch my wood shelves. Print instructions PETG…
Multi color 3D print of the Tennessee volunteers logo T. Made this for my father while he was in town! He's a big vols fan. This could be a great Christmas or birthday gift. Perhaps even as an ornament?
Hello, Today I have Ninja Turtles for you. My kids love these characters and I love coloring them. Interesting look. For proper functionality, you need to use a Print Profile! I used PLA/PETG as the material. You need to use supports!!!…
Printer: MK4s Layer Height: 0.25mm Nozzle: 0.4mm Materials used: PETG / PLA Supports needed: No Infill: 15% Print times: Total: 5h29m / 55m white / 4h34m black Need help? Find me on Discord: https://discord.gg/NndzwJvN
This card adapter is compatible with the JTEE3D Super Thin Apple AirTag available on my website and Etsy . The Slim AirTag can clip in to this card adapter with a bit of force. If you don't have a 3D printer, you can also purchase this…
max 39mm / 59mm tealights Minimal filament consumption thanks to compact design Minimaler Filamentverbrauch durch kompaktes Design See also my egg cups in similar design Eierbecher in ähnlichem Design…
Made a quick logo for the End Gate of the Skid Steer Loader made by AN3DRC. https://an3drc.com/e-shop/construction-vehicles/tracked-skid-steer-loader https://an3drc.com/e-shop/construction-vehicles/wheeled-skid-steer-loader recommend…
Einfach mit Std. Einstellungen für PLA drucken. Es sind 2 verschiedene Modelle für große (IKEA) Teelichter & ein Adapter um auch kleine Teelichter nutzen zu können. Wir haben die Drucke seit mehreren Jahren im Einsatz und es gibt kein…
A cap for the Harder and Steenbeck Evolution and Infinity airbrush to protect the nozzle and needle. It fits very snug. If you are looking for more organized Airbrush storage, check out my Airbrush Storage system . Check out my other…
Resizing of the Ball may be Needed to ensure clearence. The Example gcode resizes the ball to 7.3mm diameter and splits it in to two halves. There is a Square Connector, no glue needed. The Example Gcode disables Elephant foot…
A very small, neat case for the love of your life, your Teenage Engineering OP-Z. Sliding removable lid, with spaces for optional magnets. Prints in PLA - no flexibility required. I wanted something that barely increased the OP-Z size at…
A storage for the Harder and Steenbeck Ultra airbrush. You need 8x 6 x 2 mm magnets This is part of my magnetically stacking “Airbrush Storage” system. Check out more parts for this system and my other airbrush models here on printables .…
With the release of the PP powder print sheet the XL now has a repertoire of 5 different sheets. For comfort, it's very convenient to have a dedicated storage for each type, especially during calibrations. This remix of the ArISSH can…
a fully printable air vent based off the XF / EA - ED Falcon's Interior design.
A storage for the Harder and Steenbeck Evolution airbrush. You need 8x 6 x 2 mm magnets which will be included in the print. You will have to add printing pauses to add them! This is part of my magnetically stacking “Airbrush Storage”…
I made this since my the bottom part of my IKEA tertial lamp was bent… I designed this in Fusion 360, made to slide into the bottom of the steel tube part of the lamp. Its drawn with a diameter of ø9.65 mm to slide in the pipe that was…
This is a cookie cutter of THE STEELERS
A simple tamperstation for Ascaso steel portafilter. Works well with the classic portafilter and the bottomless one. Printed with SUNLU Black PLA and Polyterra Blue PLA Added the code for the speed profile. Perimeters 3 Infill 25 %…
I designed this my self, i wanted roughly a mouth shape upper an lower jaws. Both halves have lids held with hinges and clips. The two halves held together with 8mm x 2.7mm cylindrical neodymium magnets. I printed this using black tough…
I have an IKEA Skadis board right next to my printer. I'm currently going through it and organizing it into half functional tools that I use around my printer often and the other half being different prints I have made in the past. I…
this is a remix to make the plug fit a 32mm steerer tube
A storage for the Harder and Steenbeck Infinity 2024 airbrush. You need 8x 6 x 2 mm magnets which will be included in the print. You will have to add printing pauses to add them! This is part of my magnetically stacking “Airbrush Storage”…
Ich wollte ein Teelicht mit 38mm Durchmesser in das Modell “Snowglobe Votive Ornament - Winter Cabin” (https://www.printables.com/model/325716-snowglobe-votive-ornament-winter-cabin) einsetzen und habe dafür diesen Halter gedruckt, der…
Remove supports from fully cooled print
was expanded from the original with a pressure shell. Since I couldn't print the steering wheel with supports to satisfaction. Printing without supports or anything like that. After the printing break, remove half the steering wheel and…
stützen erforderlich für die ohren, und langsam drucken support required for the ears, and slowly print NUR FÜR LED TEELICHTER ONLY FOR LED TEALIGHTS
Prints fine with 10% infill. Only needs support on the top part. Screws in at the bottom with two screws.
I had some plates for another speaker and measured all the dimensions and replicated the cover plates. The first prototype I made had printed the inner pegs that the soft TPU or TPE bumpers go on, but they are 3.2mm and snap off easily,…
Motivation [ I need a long straight bridge element... ] When building railway bridges and the bridge crosses a track on the ground diagonally or crosses a parallel double track, sometimes the available straight bridge elements (172mm,…
Motivation [ I need a curved bridge element for radius R3... ] For a more realistic look of the bridge I designed a rail element for the curved Rail-C radius R3 30° rails. Especially for trains with long passenger carriages the R3 curves…
I saw lots of interesting projects on the internet that connected three wooden rods in a teepee tent style. If you come up with any other interesting ideas, please post a make. Some ideas that I found: sideboard table plant stand jewelry…
My little nephew got a tiny teepee for Christmas. While it is incredibly cute, it's a two person job to hold and tie the tent poles together while holding up the tarp. This is less than ideal. Therefore, I thought I'd design this bracket…
Off Duty in the Outer Rim : Leia's teenage Grunge Band “No Krew Remains” The blaster fire faded, but the echoes of captivity lingered, a cold, metallic tang that clung to Leia long after her escape. Publicly, she was the picture of regal…
Printed in PETG at 0.15 mm with a 0.6 mm nozzle
EN : With reference to my remix of the great model by Wollel I had the idea of reworking this remix for some time, as the plate could benefit from some additional stability in the long term. The competition brought this idea back to my…
UPDATE: WARNING: this part will probably break after a couple weeks if printed in plastic - learned that the hard way. Use this for temporary fixes, or if you can, print this in a strong material (metal if possible!) to ensure it lasts a…
Harder & Steenbeck nozzle and air head case for 0.15 mm to at least 0.4 mm diameter. Ignore the “Evolution” in the filenames, since all Harder & Steenbeck airbrushes use the same heads and nozzles, you can use this case for any of them.…
made it easier to take out by shifting the sheet a little. It is recommended to fix it with double-sided tape.
This model is designed to replace the speaker grill on the KOII portable sampler manufactured by Teenage Engineering. I am particularly fond of the orange accents on the machine and sought to replicate them. I printed this component using…
Wanted to hang my OB4 on the wall
I've added 2 holes for the screw heads for using with the Cable Cover. You need 3x M3x8mm
EN : A request in the comments section prompted me to revisit this idea with two brush attachments. So I modifyed my former model ( see ). Thanks to the user for the reminder. Material : PLA Layers : 0.2 mm Supports : none See also model…
Motivation [ New design concept for pluggable assembly without glueing ] Glueing for assembly can be somewhat difficult and you easily mess up your model. Therefore this design approach allows a stable assembly by simply plugging smaller…
This is a 12-teeth sprocket designed to work seamlessly with a modular chain system. The sprocket comes with an integrated bearing housing, allowing for smooth rotation and durability under load. This makes it ideal for various mechanical…
I made a version of this using the orignal mounting plate and sheet metal years ago. I've since converted the Burns to electric and after seeing the 3s battery holder I made, someone was interested in the servo mount, so here it is!…
So this adapter is for a 43ish mm vacuum hose to connect to the Bestway 27 mm hole for vacuuming. the small end is a touch small but if you use a real hose clamp it will work fine. the model i mad does have a few errors, I'm sure someone…
A simple remix of the steel sheet holder by Waldmops but with letters embossed above the mounting holes.
I broke the steering crank on my Mad Crusher so I made a replacement. The model is very simple, but works well. It is bulkier than the original for strength, but maintains the original linkage angles. Mount with original bushing and…
Killer Moth : Teen Titans Go
🥚 Introduction How does Gyro celebrate Easter? By replacing his regular steel ball with a steel egg ! For printing, there are two options: The full rotating fidget (four printed parts plus bearing and weights) A plain egg , just for…
For our little fir tree we needed a halloween custome! ;-) I used the multicolor functionality of my Prusa XL printer.
It might need to scale at 10%. No support needed.
I tried to use https://www.printables.com/model/537121-replacement-gear-for-playtive-electric-trains but this did not work for my application, printing also did not print teeth sharp enough on my MK4S with ASA. So this is new wheel made…
The G50 grinder has very fragile lid hooks that break easily causing the lid to fall off and preventing it to start. I made a two part ring with new hooks on the bottom attached to the lid. NOTE: There are spare lids sold by Teesa for a…
To manually adjust steering trim of the AX24 Rock Crawler, since the stock controller does not allow trim adjustments of the rear steering.
Ein Ersatz Steuerrad für den Kettcar meines Sohnes Die Verbindung vom Steuerrad zur Steuerstange konnte nicht per 3D-Druck hergestellt werden, da sie immer wieder gebrochen ist. Daher habe ich sie aus Aluminium gefertigt. A replacement…
Newly added model for Nintendo Switch Steelbooks! Fast to print and easy to use steelbook stand for IKEA SKÅDIS board. Display your game or blue-ray steelbooks in their full glory! Features: Lightweight & slim design Quick to print (Under…
100x160mm sign, with art of a crane and text "Steel builds the world" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs .…
The grill was damaged the support mounts were broken out. I couldn't find new parts so I printed out replacement mounts. Corners were directly screwed together now they are reinforced with fasteners. The pictures illustrate the repair…
Insert pro stolní hru Dračí zuby. Rozměry: 252 x 252 x 37 mm Tisknul jsem na MK3S+, tryska 0.4 mm, vrstva 0.20 Quality, PLA.…
Hello this is a fun 3D Printed RC project that's a great way to get hands on experience with standard DIY development electronics. This model specifically is an updated/improved version of the MiniSkidi V2.0 Model. Updates include tracks,…
"Slightly" overengineered flexible steel sheet holder for MK and MINI printers to be screwed to a shelf. It's also extendable to as many as you want. Variants for other steel sheets: Prusa XL Bambu Lab A1 Support my work For non-Prusa…
Updated the lid to make sure it fit the bottom of box. Lowes Mini Box. Flat lid included allowing you to add text in slicer of what is in the box! The indentations in the bottom of the box is 1 mm and your printer has to be able to print…
I designed the articulating hinges a bit bigger than on the orca, so you can safely scale it down a bit. Thanks to PrintLapseVideos for the Timelapse!
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) The Man of Steel. Or in this case: plastic. This guy is a huge part of my childhood. I hope I did him justice here, and that you, dear…
Hey everybody this is V2.0 of the MiniSkidi, this is a fun introduction to robotics if you dont have much experience. Below is a link to a step by step YT build video as well as a link to my website where you can pick up the electrical…
This Whistle is built for one purpose: being as loud as possible. Every printed unit is guaranteed to exceed 122 dB , making it one of the loudest whistle designs you can print — well into the range where hearing protection matters. ⚠…
For a commercial license, please visit our website to become a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/ This is a full dice set for your tabletop games and roleplaying! All of the dice and the jawbone are printed flat…
Who hasn't seen a print-in-place herringbone planetary gear… probably a version from Emmett . However I recently developed a different method for those gears which allows planet gears with only 3 teeth (actually also with 2 teeth, but…
These are the files for a 3D printable wooden storage rack for the Lowes Teeny Tote Bins aka the 3D Printable Bins by @MelissaDay https://makerworld.com/en/models/1721852-mini-hdx-tote-bins-and-storage-rack#profileId-1899549 These storage…
JERRARI3D.com Modular solutions for storing steel sheets for the PRUSA i3 (MK2.5 and MK3) and Bambu Labs (X1 and P1P) Unlike my original steel sheet holder the GEN2 Steel Sheet Holder V2 does not require a backer mounted on the underside…
MICHELANGELO TMNT REMIXED
A mini skid steer digger 20mm in width. Scratch remodeled version of “Gophergames” Skid Steer to fix model geometry issues, resized to 20mm, done in Solidworks. Because the 10mm version is a choking hazard for small children this bigger…
This Whistle is built for one purpose: being as loud as possible. Every printed unit is guaranteed to exceed 124 dB , making it one of the loudest whistle designs you can print — well into the range where hearing protection matters. ⚠…
