Tefal Oleoclean oil reservoir screw
Printed in PETG for food contact.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 11
- Likes
- 2
- Rating
- 0
138 models
Printed in PETG for food contact.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Home travel and fitness exercises and fitness dumbbells are very easy to use and can increase enthusiasm for fitness. It can meet your different training needs. Suitable for women or children to lose weight or exercise. Adjustable weight,…
Baldur's Gate 3 Artefact by uprisingfx - just split into 2 halves so I could print it better on my FDM printer, then I glued the 2 halves together. I had some very small supports for a couple of the ridges where I had split it. It's not…
Mini Stefan Bust created by Wekster ( https://www.patreon.com/wekster ).
This spacer pretends your softer food to get squished. Two Versions: The “Elite” Version is not as wide for the drip tray. XL Elite: 21 mm XL Non Elite: 23 mm All Versions should also work on the non XL versions. Print position shown on…
Introduction I currently use the Anycubic RERF (Resin Exposure Range Finder) method to dial in my resin materials, as my Anycubic M3 does not support variable layer time through UVTools, RERF is the next best thing for me. I was not happy…
I liked the design of the pluggable pot lid holder. But we recently bought some Tefal Ingenio pots and pans. The lids of those are interchangable, but also very shallow. Therefore the original models didn't work. I simply shortened the…
Don't want your toasts to be squished? Print this ratchetty & telescopic, adjustable upper lid support, and don't use fo
Сrysta artifact from the video game stalker
As nice as Tefal Ingenio kitchenware is, after some time of usage glass lids handles breake around thread. Here is replacement for main body of glass lids handle - big, round plastic part that you screw to glass lid witch M5 stainless…
-durch die Füße steht die untere Grillplatte waagerecht. -gedruckt aus PETG-CF
PETG oder PETG-CF und möglichst massiv drucken. Im unteren Bereich des Grills laufen die Rillen sehr eng zusammen, da am besten den Spachtel seitlich mit einer Zinke benutzen.
Durch die Verwendung dieser Füße steht die untere Grillplatte des Optigrills Elite waagerecht und das Grillgut wie z.b. Würste oder Gemüse rutscht nicht mehr herunter. Ich empfehle als Material PETG; Schichthöhe 0,3mm; 6 Perimeter; keine…
Simple wall mounted holder for the Tefal DT9100 steamer. Would probably also fit similar Tefal steamers. Remember to mirror the part if you want the steamer to face the other way. IMPORTANT: The pictures and the presliced gcode is…
sometimes you forgot your raclette pads under the heat... and the handle melt.... print one and change it ! even in color to change ! it really works ! on the photo, an original black one and others TAFEL ! quelquefois on oublie les…
Náhradní ovládací knoflík pro Tefal mixer. Originální se nám zlomil po týdnu používání. Tak kdybychom náhodou nebyli jediní :) EN: Replacement control knob for Tefal blender. The original one broke after a week of use. Just in case we…
Update: Optimized Material use and added ripples for better grip. This is my first model I made myself. Please be kind :-) This oil cap / screw fits the oil tank of an Tefal Oleoclean Deep Fryer. Part no. SS-203748. Deutsche Beschreibung…
Storage shelf for up to 8 plates for the Tefal Snack Collection waffle / sandwich maker. I added the support beam after I printed the body to reinforce the structure. An improved model could have wider carriers and better support…
Es handelt sich hier um eine Abstützung für einen Tefal Optigrill Elite Kontaktgrill, das ist unser Modell, auf anderen sollte es auch funktionieren. Wenn man ein Sandwich, Gemüse oder ähnliches grillen möchte, drückt die obere…
Mysterious Artefact from Baldur's Gate 3. Recommended to be printed in resin
After a few years, my handle on Tefal lid got loose - the screw chewed up the threads on the original handle. I created this to resemble the original handle, however without the metal logo insert. I considered putting in a heated insert…
Simple stand for grill plates for tefal snack collection. Fits ender3 :) to be printed without supports
~ ~ ~ 🇬🇧 English ~ ~ ~ Holder for Tefal Snack collection plates for 2, 3, 4 and 5 pairs of plates. The plate's position in the stand is given - on the left side there's a cutout for the lock and on the right side of the model the supports…
useful wall support that must be glued with double-sided tape or silicone to store the removable handle of the tefal
Vacuum head adaptor for Tefal (Rowenta) X-Force Flex 9.60 (TY2039,TY2079,TY20xx) 25mm to use with Generic 32mm and 35mm Recommend print parameters: Wall loop: 2 Infill: 100% concentric Supported: no Brim: outter 5 mm
printed at 100% fill + 0,1mm layer, 0,4mm extruder, PETG, print wiht base supports, works well
PETG / ABS Layer 0.2 Remplissage/ Infill 30% mini
Draining board for Tefal Optigrill XL. It eliminates the problem when the grill lid is lifted in the kitchen on the kitchen. Wash only in your hand. Don't put the dishwasher! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
The handle on the lid of the Tefal pan broke and I drew a new one. Perhaps someone has encountered such a problem and my work will be useful to them. The principle of reverse engineering was applied to the development, this pen differs…
Designed to mount using 3M VHB tape / command strips, or similar. It is not a tight fit so don't worry about scaling the model Print in PLA or PETG. I used 0.24mm layer height with 0.6mm nozzle but most combinations would work.
I don't know if Stefan (CNC Kitchen) is fan of Rick & Morty or if he is even aware of Pickle Rick - but he did not turn himself in a pickle. In his recent video Stefan posted a scan of a pickle and also he has the “Mini Stefan” by Wekster…
Rowenta/Tefal cleaner adapter to generic vacuum cleaner pipe. The intend is to be a emergency/substitute adapter. Idea came from broken brush at my parents vacuum cleaner. Bonus - it should work fine with vacuum bags now (i couldn't use…
This is a replacement handle for a cooking pot cover (Brand Tefal). 1 x TefalHandle : Layer:0.20mm Raft:no Brim:yes Support:no Infill:100% Dimensions: l=36mm L=73mm H=29mm Hole=4.5mm Print Settings Printer: Geeetech A10 Rafts: No…
That's a simple knob to replace the broken one on my Tefal Steam Cuisine. The 0 is not really in vertical position, I'll do another model later. I print it upside down, with PETG, I don't know if the axle inside would became too hot for…
Original model modified to accommodate two handles and the possibility of fastening with a screw It is not a tight fit so don't worry about scaling the model Print in PLA or PETG. I used 0.25mm layer height with 0.4mm nozzle but most…
My personal keychain in the Eagle Lake font - I pause todo a colour swap on the top layer Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer!…
шестеренка которая постоянно выходит из строя
I used the normal presets to print (CR10) 0.4 mm nozzle 0.20 layer height If needed you can use sandpaper to make the parts that slide in the grill smaller, it is a pretty tight fit. Enjoy
This is a remodel of the steam tank's cap. It should fit tightly on the metal part of the cap. I attached the gcode for ASA and PLA and the 3mf file. Print with supports for the inside.
Replacement meet gringer wheel to Tefal masterchef gourmet kitchen robot. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Creality PLA Orange Notes: Print horizontaly for…
Saya pro kuchyňský nůž Tefal Santoku opatřena samolepicí magnetickou fólií tloušťky 0,5 mm. / The Saya for the Tefal Santoku kitchen knife is equipped with a self-adhesive magnetic film of 0.5 mm thickness
Remixed model to add more tolerance to fit new variant of the original model
This is Stefan Feld’s Marrakech organizer. Compatible with Classic and Deluxe. Extensions are not included. If you need an organizer with extensions, you can check the design at the link below. https://cults3d.com/:1874737 Please print…
A replacement for the original component with altered geometry near the hinge, which often fails. Printing with 10 walls, in vertical orientation with supports, the material that performs well at 100 degrees is nylon with fiberglass:…
There are numerous variations of these stands available for free download, but in most versions, the clipped-on base collides with the tray. So why should you download and print our Tefal OptiGrill Elite XL stand? Because our stand can…
Bring supernatural drama to life with this incredibly detailed 3D printable figurine that captures every nuance of this beloved character. This stunning STL model showcases exceptional craftsmanship with clean lines and perfect…
Really like this grater / slicer from Tefal but it always annoyed me how it would spill grated food next to the container. No more! This guard catches the food and gently guides it down to the bowl. Printed it with default settings, front…
The print failed, but you can see in wich direction it will go. When print is successful, I will update the pics. 2022-09-18: Pics are updated.
So the knob of the Steam Iron descale stick was broken. It has a shrunken connection. Printed it in several versions and finally it fits. The mounting is a nice trick. Print it in PLA. Then put in water of approx 80C. Last press it…
MAGIC TEA by TEFAL is a splendid electric tea pot. but i lost the diffuser of water on the top of the tea container. you can compare an original one and the 3D printed. print it and plug it ! it works ! la theiere MAGIC TEA de TEFAL est…
This is a replacement part for the Tefal GC241D Grill. The Clips of the original colored parts broke of after a couple of years. I used a translucent grey PLA Filament as the lamps were already colored underneath but this results in a…
Simple hanger desingned for Tefal INGENIO handler. Infill 10-15%, PLA is enough.
This is my holder for Tefal Access steam first because it is delivered without any holder or mount. As it is quite loose, it's easy to remove and put back in.
Wled Stefan wie immer am besten in 0,10 drucken und nicht skalieren
Unterstützung : Ja Mindestens 20 % Füllung Nur mit einem kalten Bügeleisen verwenden.
Replacement part for Tefal snack collection waffle irons. This is v2. I printed v1 which almost fitted perfectly. I needed to shave some plastic off here and there. I tried to edit v2 to reflect my post processing changes to p1. I did not…
I got this Tefal grill for my birthday a year ago. One of the handle attachments on the front broke quickly. I made a replacement. I made it sturdy and also saved material by adding openings where possible. This is version 3 because the…
It is the plastic part on top of part CS-00132541 https://www.tefal.cz/obchod-s-prislusenstvim/Víčko-nádrže-CS-00132541/a/1800132541 Ours broke so I did a quick model, nothing fancy but it fits and works nicely. The nut is a snug fit so…
Spare part for tefal plate cover. Need to be printed from ASA. (PETG has been deformed by heat)
Holder for 2 sets of plates for Tefal Snack
Механизм состоит из двух частей, чтоб упростить печать: Втулка вращения на которой можно зафиксировать шестерню Внутренний фиксатор венчика Шестерня Шестерня надевается на втулку до специального упора. Втулку можно из ABS, PetG и более…
This custom-designed dough cutter is tailored for use with the Tefal Donut Plate No. 11, ideal for making Nini-style mini donuts. The cutter ensures uniform dough portions that fit perfectly into the mold, helping you achieve…
Voroni Mini stefan ( cnc kitchen ) Remixed model to Voroni Style Filament: COLORFILL PLA BLUE Printer: Anycubic Kobra 2 PRO
This is a replacement dew collector for the Tefal RK7 4-in-1 rice cooker. I have not yet printed this thing. Category: 3D Printing
Uchwyty można używać pojedyńczo lub łączyć je razem w zależności od potrzeb. Sposób przechowywania chroni powierzchnie teflonowe przed uszkodzeniem.
Ikea Stefan chair soft foot
- Use PETG or ABS. Don't use PLA. - Create support for holes. - Glue the handle after printing.
This model is a sturdy version of the handle-connector pieces used in the Tefal Inicio Grill / Toaster GC241D. Both original pieces broke simultaneously on my toaster grill, prompting me to remodel the part with some extra material in an…
Several of the feet on my Actifry FZ700215 have fallen out, gone missing. I had at least one left to make a model from so I did. The replacements were printed in TPU and fit well ( and work well at their purpose of stopping the fryer…
I print it out of PLA on my Prusa mini.
Left and right bracket for tefal/Rowenta G05-M Print with high temperature resistant material. Use at your own risk.
Tefal raclette Pizza Cutter for pre-cutting the pizza pieces for the raclette pan
Teafal Airforce filters after a few washes get sqhuishy and deformed. With this insert the filter is round again and i think with the suction is there for a longer time.Preferably print this with PETG This is specifically designed for…
Tefal ingenio gridfinity handle storage. Single and double handle version
This is a mini version of https://www.thingiverse.com/thing:3600402 # with a case to hold the board and the game pieces. Print instructions Category: Games Summary This is a mini version of https://www.thingiverse.com/thing:3600402 # with…
### English ### We have a Tefal SW852D Snack Collection sandwich and waffle maker (model from 2022). The feet of the appliance are so tiny that the whole waffle iron slides around on the kitchen worktop at the slightest touch.…
Short form of the holder for the Tedal steamer. Dimensions: 220 x 120 x 123 mm I shortened the length of the original by 20 mm to allow my Neptune 4 Pro to print it. The Tefal logo was removed as the version with the logo really printed…
Replacement top for a handle of particular Tefal knives. Fit isn't completely perfect, but OpenSCAD source file is included, so feel free to tweak it yourself.
ערכת שיעורי מידות לפי הגר"ח נאה - כזית, כביצה, רביעית, טפחים ואצבעות. A set of Midot sizes according to Grach Naeh - kazait, kabitza, revieeit, tefahim and fingers.
La Toupie AteNumStudio est un petit artefact ludique et minimaliste, conçu entièrement sous FreeCAD. Pensée pour tourner longtemps et rester agréable en main, elle apporte une touche de mouvement et de calme à ton bureau. Son design…
Uns ist die grüne Arretierung des Schnellkochtopfes abgebrochen. Ich habe es mit PETG gedruckt und bisher noch keiner hohen Hitze ausgesetzt. Theoretisch sollte der Griff aber nicht so heiß werden und das PETG sollte die Temperaturen…
A fun little storage rack for Tefal Snack hot plates.
Печатал из ТПУ (FLEX U3Print TPU 60D), т.к. он может контактировать с едой. Части фиксируются между собой резьбовым соединением - добавлен допуск 0,2 мм. При конечной фиксации капнул клеем на резьбу, чтоб исключить контакт с едой. Printed…
Open lever. Slides snuggly onto the open shaft. Print suggestions: PLA works prefectly 0.1 layer height for smooth surface 20% cubic infill 3 walls Nice first layer
This knob fits the kitchen robot Tefal QB161H38 https://tvuj3dtisk.cz/kuchynsky-robot
Printed these upside down, so that the +/- symbol is better printed.
A replacement handle for Tefal fryer. The metal “hook” have to be replaced. The new model i designed for slightly larger head for the screw that holds the hook Printed with pla. 25% infill.
Simple replacement knob for the top of your Tefal steamer, uses all of the origional fittings and the origional screw. Print with 5 boundary layers and 5 top and bottom layers to give the screw plenty to bite into and it should work just…
I designed these adapters for the IKEA Stefan chair to make it easy to install felt pads on the chair legs (see Fig. B). The goal was to improve how smoothly the chair moves without the felt pads coming loose over time. These adapters…
ערכת שיעורי מידות לפי הרמב"ם - כזית, כביצה, רביעית, טפחים ואצבעות. A set of Midot sizes according to Maimonides (rambam) - kazait, kabitza, revieeit, tefahim and fingers.
My grandmother has arthritis so finds it hard to grip some things. Case in point the tefal steamer lid. So I've designed this handle to give her something better to hold onto. If you want the same, you need to print 2 each of the models…
Originally created to display a 3d printed Baldur's Gate 3 artefact (available here: https://www.thingiverse.com/thing:6198805 ), although you can use it to display plenty of other things, I'm sure. Printed with supports and 15% infill in…
My Quickchef mixer broke so I've managed to design replacement partof my own. This is the ending part of the motor shaft that connects with accesories. Printed material: PETG Can't remember exact printing setting but you can download…
The attachment point holder for the Tefal IXEO+ steamer brush broke after years of owning the garment steamer. It will easily and eventually break if one does not handle the steamer holder with care. This attachment will make the holder…
The Oil box control button on our Tefal Oleoclean broke, so I designed a new one…
This is a jig for cutting normal Nerf darts down to "Stefan size" Allows you to cut foam backer rod down to 36mm
This guard fits over the blades of the Tefal "5-Second Chopper" (900-ml-Version, Model K13204). It covers the sharp edges of the blades. Material: PLA or PETG (PETG is recommended for durability). Layer height: 0.20 mm Infill: 15% – 20%…