Search results: thick

Sort order

1,592 models

P
PrintablesMikolas Zuza

Smoothed topology optimized shelf bracket - Flat & thicker back, smoothed body

I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…

Print approx. €7.17–€8.76 excl. taxPreliminary estimate for one variant

Downloads
5,195
Likes
1,351
Rating
4.94
P
PrintablesMattis

Bathroom Scale Wall Mount (Multiple Thicknesses)

A wall mount for rectangular bathroom scales. Attachable with adhesive strips. Multiple thicknesses available.

Print approx. €5.91–€7.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
492
Likes
100
Rating
5
P
PrintablesBlackFury

No Logo & Thicker Motorcycle Kickstand Extender

This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
178
Likes
16
Rating
0
P
PrintablesRobertusMaximus

Wargame Walls Thick Section 18

Wargame Walls Thick Section 18 Because the fight goes on in the deep, dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part, citizen! Print these out today! Show your worth! Get back in the fight!…

Print approx. €3.90–€4.76 excl. taxPreliminary estimate for one variant

Downloads
172
Likes
32
Rating
0
P
PrintablesMadeinSwabia

Minimalistic smartphone stand (for smartphones up to 10mm thickness, in landscape orientation)

Hello friends from all over the world :) This is a simple smartphone stand for cases, when you don't want to keep it in your hands while sitting at the table and would like to have a more ergonomic angle of view. For example when you're…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
12
Rating
5
P
PrintablesFlo

dowel pin clamp / Passstiftklemme (thin and thick version)

Clamp for secure and damage-free clamping of cylinder pins and wooden dowels. Suitable for shortening or reworking cylinder pins or wooden dowels with a file or saw. Clamping diameter 12, 10, 8, 6, 5 and 4 millimetres. Update I have added…

Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
120
Likes
36
Rating
5
P
PrintablesJames

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
31
Rating
0
P
PrintablesFernando Pena

Rode Wireless Go Handle - Shorter and Thicker (Condenser Mic Form Factor) [remix]

I wanted a handle with a similar form factor as a condenser microphone, so I could use it with a traditional microphone arm, or to handle it myself while talking to the camera. So I went and remixed one of the models by @365Prints…

Print approx. €2.03–€2.49 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
10
Rating
0
P
Printablesmarkco

Fence Post 4x4 Topper Forth Try - Body Thickness .8mm

So far happy with the looks and takes about 55mins on the mk4 @ .2mm Speed setting. Not sure how the color will hold up but thinking that I can paint them if the sun bleaches them too much.

Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
18
Rating
0
P
PrintablesPrints&Kinks

@Cherry_Labs "Unique print in place laptop stand - Super portable - Adjustable angles" remix for 16” MacBook Pro (2023) or 14.29mm thick laptops.

Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…

Print approx. €4.56–€5.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
64
Likes
6
Rating
0
P
PrintablesNina Máčová

Frame for standing clock dials - 10 mm thick

This frame is made to follow the 2 mm thick dial and completely cover the walls of the dial opening. If you decide that the appearance of your clock needs to be improved, if you had an accident while printing and the layers shifted (for…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
25
Likes
22
Rating
5
P
Printablesvoxpelli

Thicker Minifig Hexagons (+ some with background image)

I have all my printers fitted with 0.6mm nozzles and the original models had a bit too thin walls for that to work well. I therefore made the walls 2mm thicker + moved the hole for the minifig base 1mm up. This model is based off the…

Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
3
Rating
0
P
PrintablesHolzerMax

Hook for a 30mm thick Windowsill

Printed from ABS. Optimized (wall thicknesses) for 0,25mm Draft preset in Prusa-Slicer, so just use that and it prints in just less than 30min.

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
3
Rating
0
P
PrintablesRanchBear

Wyze Lock Adapter - Orange - Extra Tall n Thick

Original adapter piece was too short for the lock+handle combo that I had. Previous designs that copies the original pieces lasts around a year before they eventually crumble so here is a ultra beefy version that outlasted previous…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
0
Rating
0
P
Printablesthe_d_dog

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
0
Rating
0
P
PrintablesEfpasia

Table connected holder 19mm table thickness

Print tips: Best to be printed with full perimeters (7 perimeters with 0.4 nozzle diameter) to be more stable.

Print approx. €14.80–€18.09 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
1
Rating
0
P
Printablesskaw

Arendo mixer, stronger and thicker lid

Also check out this chamber reinforcement :) Print settings material: PETG, also enable brim for the lid only and set to brim_width=10mm, brim_type=inner+outer lid : 9 perimeters (to make it 100% solid along the top sloped part) lid's lid…

Print approx. €10.39–€12.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6
Likes
0
Rating
0
P
Printablesvidision

Thick Voronoi Squeeze Ball (TPU test print)

Made with meshlab and made to be printed without supports or any special settings, as a stress test for TPU printing.

Downloads
12,012
Likes
589
Rating
4.87
P
PrintablesgArtur0

Xbox Series/One Controller Phone Mount for Narrow and Thick Phones

Original version was to big for my phone. Additionally I'm using case with “ring” so it was to thick so I created two new versions for anyone with small phone, and phone with thick case. Xbox Series One Controller Phone Mount Narrow - for…

Downloads
5,210
Likes
480
Rating
4.86
P
PrintablesErik

Updated: Bracket bundle: 14 L-brackets and 16 corner braces (3mm and 6mm thick versions)

I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…

Downloads
4,647
Likes
1,403
Rating
4.94
P
Printableslopsidedflan

Banana Katana Remix — thicker blade + connecting block

Modified blade to be thicker With the original blade model, the blade pieces kept breaking whenever I swish-flicked it open because of how thin the walls were, both in PLA and PETG. So I increased the width of the walls of the blade…

Downloads
2,761
Likes
276
Rating
4.56
P
PrintablesZachstuh

Iphone XR, 11, 12, 13 Thicker Case Charging Stand

This is a remixed/edited phone stand that I configured to use at my desk for my iPhone XR that has a thick case on it - the original just fit the bare phone without a case. Widened the body a little too for support. Printed on my prusa…

Downloads
2,324
Likes
111
Rating
4.22
P
PrintablesUltrafastegorik

A thicker CARBON 13 Type F

I have received a lot of backlash on Reddit, calling this "gooning content", so before anyone calls this “gooning content,” please consider this: X: We must respect women and their bodies! X: You drew a woman with large breasts, you don't…

Downloads
1,955
Likes
527
Rating
4.83
P
Printablesvictornpb

Layer Thickness and Wall Width - Design Reference Ruler 0.4 to 5mm

You might also like: https://www.printables.com/model/280185-design-reference-radius-ruler-innerouter-1-to-12mm In the computer everything looks huge, but in reality 1mm could be enough or may be too flimsy depending on what you’re trying…

Downloads
1,719
Likes
441
Rating
4.93
P
PrintablesFelix Wiseman

1×5.25" Optical Disk Drive Bay to 4×2.5" up to 15mm thick

This print is a conversion from now mostly useless optical drive bays (discs/DVD/CD bays), AKA 5.25" drives. The adapter will fit up to 4 2.5" drives instead and can fit all standard formats (so each of the 7mm, 9.5mm, and 15mm thick…

Downloads
1,662
Likes
194
Rating
5
P
PrintablesLMF5000

Lithophane Thickness Calibration Tile

This is a calibration tile for finding the "maximum thickness" to enter into lithophane generators like lithophanemaker.com or 3dp.rocks. Values of 3-4mm usually work well, but since every filament absorbs light differently, you might…

Downloads
1,586
Likes
235
Rating
4.94
P
Printablescewo

Micro SD Card Wallet - less than 4 mm thick

Micro SD Card Wallet Holds 16 Micro SDs and 1 standard SD card. The tray contains the clipped in cards covered by a sliding lid. Dimensions: 58 x 99 x 4 mm Printing recommandations PLA 0.3 mm layer height 4 perimeters, arachne mode is not…

Downloads
1,556
Likes
201
Rating
4.93
P
Printablesvg1

Filament Spool Clip v2 - Thicker Walls

Keep Your Filament Tidy – Now Stronger Than Ever (V2) An improved, compact, and user-friendly clip designed to secure filament ends on spools—preventing unwinding and tangling. Now in Version 2 , featuring thicker walls for enhanced…

Downloads
1,528
Likes
171
Rating
4.77
P
PrintablesSTYLE NOGI

Ender 3 V3 SE - Phone Holder ( 14mm, 8.9mm thickness )

I removed the case and verified that it is compatible with the Rakuten Hand 5G and Galaxy S23 Ultra. I tried printing with the following settings. ------------------------------ Slicer: Creality Print Nozzle: 0.4mm Layer Height: 0.15mm…

Downloads
1,397
Likes
215
Rating
4.44
P
Printablessquirrelf3d

40mm fan grill / cover / guard - 10mm thick

just another fan grill design easy to print, no print support. the large air gap between the fan blades and the grill allows little to no added turbulence noise from it. 10mm thick to match a 4020 fan thickness when used with a 4010 fan,…

Downloads
1,341
Likes
397
Rating
5
P
Printablesgrizly

Screwable headset holder for thick tables

The original model couldn't be used on my desk because it is much thicker then 35mm, so I remixed it. You'll need screw.stl, plate.stl and nut.stl files from the original model (…

Downloads
1,337
Likes
486
Rating
0
P
PrintablesAUGU5TO

Calibration Cube - wall thickness - new filament - extrusion

Description This is a fast and easy to print model to calibrate your new filament. It can be used to find the right settings for the extrusion factor to get the right wall thickness. It is designed with a 0.86 mm wall thickness to meet…

Downloads
1,267
Likes
89
Rating
4.95
P
Printablesthall72

Lego Compatible (15712.dat) Tile 1 x 1 with Clip (Thick C-Clip)

This model is compatible with the lego system.

Downloads
1,233
Likes
49
Rating
5

HSW Caliper Mount (Thicker)

I like the design of the original caliper mount, but I managed to snap a supporting vane off mine while removing it from the print bed. I remixed that model to thicken those vanes slightly, and now I have no troubles printing robust…

Downloads
1,074
Likes
171
Rating
4.83
P
PrintablesJanne

Layer thickness visualizer 0.2-3.2

With the model, you can visualize how the addition of one layer looks and feels. The model can also be used as a thickness measure gauge.

Downloads
1,048
Likes
269
Rating
4.68
P
Printablesthall72
Downloads
1,039
Likes
53
Rating
5
P
PrintablesRobert Kindl

Higher & thicker Mountains for War of the Ring 2nd Edition

This is remix of https://www.thingiverse.com/thing:4596529 by thomasotwo@thingiverse I wanted those mountains higher and thicker. So I modified it in Blender to make it thicker and then I scale its height to 133% (10mm). It's still fits…

Downloads
1,024
Likes
80
Rating
4.5
P
Printablesthall72
Downloads
904
Likes
43
Rating
5
P
PrintablesRaynovate LA

Thicker Chest Plate (armor chest upper) for Dummy 13

First layer at 0.20 Print rest at 0.15

Downloads
889
Likes
166
Rating
4.8
P
Printablesthall72
Downloads
883
Likes
42
Rating
0

Bowden PTFE Coupler Clip (3 thicknesses)

Easy, quick printed way to help your Bowden couplers stay tight and strong. Print without supports, as oriented, using your slicer's finest “super quality” setting. Three (3) varied thicknesses of clips are provided: 1.00mm, 1.25mm, and…

Downloads
871
Likes
65
Rating
4.67
P
Printablesashyuh!

Pentax K Mount Body Cap (various thicknesses and styles)

I've made 4 versions of the camera body cap depending on what you'd like. one that keeps the locking pin in place and one that doesn't, and then each of those two options with or without the Pentax logo on it. I've printed the logo +…

Downloads
844
Likes
56
Rating
4.88
P
Printablesharaldan

Waffle pattern pot with thicker bottom

The bottom in the original pot can be a little flimsy, being only 1mm thick. It gets even thinner when you scale the model down, so in this version I made it roughly two times thicker. Otherwise it is identical to the original.

Downloads
830
Likes
143
Rating
5
P
PrintablesSomatik

Tablecloth clip / clamp for a 45mm thick table

needed a tablecloth clamp for a 45mm thick table, remixed the great design by bramsky, and it works perfectly Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20 Infill: 50 Filament: Prusament PETG…

Downloads
817
Likes
78
Rating
5
P
PrintablesMartin

Thicker BetaFPV Air Canopy for lower cam angles - For Air65 and Air75 Tinywhoops

Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it

Downloads
710
Likes
73
Rating
5
P
PrintablesKYZ Design

Gridfinity Thick Walled Divider Bins - 20 Sizes

Modeled from scratch to optimise for strength, rigidity and a quality feel, not for “fast print”. Slightly deeper than standard bins. No magnet holes. Walls are 2.6mm thick.

Downloads
698
Likes
113
Rating
5
P
Printablesscokeng

Carton Corners for Expansion 4mm thickness x150mm height

Designed a corner expansion for 4mm corrugated carton boxes. Just adjust the heigh in prusa slicer on for your box height. I suggest to put tape around it to increase toughness so it won't fall off easily. Everything shown in photo. Mine…

Downloads
692
Likes
472
Rating
5
P
PrintablesRudy Martin
Downloads
642
Likes
95
Rating
5
P
PrintablesFlying Bonanza

Thicker Prusa Spool Holder

This is a quick remix of the Prusa provided spool holder (B4). Added an extra 10mm thickness to the overall width of the original design to add more rigidity. The clip on portion also benefits from an additional 10 mm to snap onto the…

Downloads
638
Likes
28
Rating
5
P
Printablesthall72
Downloads
629
Likes
38
Rating
5
P
PrintablesJeinerox

Thick drag chain kit for adventurer 5m (Minimal DIY Enclosure)

The standard chain starts to sag and beat against the case over time, so I decided to print myself a new one, however, I prefer the simplified drag chain termination and I would like to use the spool holder from @design8studio in the…

Downloads
615
Likes
78
Rating
5
P
Printablesthall72
Downloads
614
Likes
35
Rating
3
P
PrintablesEdwardG

Cable wall clip for thick cable

Cable wall clip for a 2.5mm 3-core cable that has an overall cable diameter of almost 11mm. Hole is for a 6mm wall screw with countersunk screw head. The overall thickness is 5mm and printed in solid infill for more strength. I used PETG…

Downloads
610
Likes
48
Rating
4.91
P
Printablesthall72

Lego Compatible (18031.dat) Minifig Sword Longsword with Thick Guard

This model is compatible with the lego system.

Downloads
574
Likes
78
Rating
5
P
PrintablesJacotheron

iPhone 13 TPU Case with Thick Sides

I wanted a new case for my iPhone 13. Having looked at the available options, I was not happy, so I looked for one that should be easy to modify to fit my needs. I found the “IPhone 13 tpu case” by Majszczur, and remixed it to fit my…

Downloads
563
Likes
34
Rating
4.67
P
Printablesthall72

Lego Compatible (36762.dat) Minifig Hair Thick and Messy

This model is compatible with the lego system.

Downloads
557
Likes
55
Rating
5
P
PrintablesHEN3DRIK

Goonies pirate coin (thicker, upright with stand)

i put both halves of the coin together, added a middle layer, reduced the depth of the minting and added a stand. Print upright with copperfill, age it with vinegar or ammonia. have fun! ++ UPDATE ++ Added one with no stand for custom…

Downloads
537
Likes
90
Rating
4.83
P
PrintablesSterling

Hair Clip (for thicker hair)

Having long hair has its challenges, it often does not behave and makes frequent escape bids from hair elastics. I wanted to find an easy hair clip that can control thicker hair without applying any tension which might cause headaches…

Downloads
524
Likes
140
Rating
5
P
Printablesthall72

Lego Compatible (63965.dat) Bar 6L with Thick Stop

This model is compatible with the lego system.

Downloads
517
Likes
35
Rating
0
P
PrintablesLowRob

iPad Pro Stand for thick cases

This is an iPad Pro 12.9" stand for thicker cases (e.g. EVA-Foam) Das ist ein iPad Pro 12.9" Ständer für dickere Hüllen (z.B. Schaumstoff) Print instructions Unassociated tags: hülle, ständer Category: Tablet Print Settings Printer Brand:…

Downloads
510
Likes
22
Rating
5
P
PrintablesDale

OurFather Cross with thicker holder - no glue

I took Matt Germans beautiful Lord's Prayer art (https://www.printables.com/model/711044-ourfather-cross), added Jerry Lee's extended tabs (https://www.printables.com/model/722193-lords-prayer-cross-hanging-wall-art) and shortened them…

Downloads
508
Likes
73
Rating
5
P
Printablesdesertfox292

Toothless with thicker tail

This is a remix of the model by Derailed3D. Schnipp already did a remix with a thicker tail as well, but I changed the shape of the final bump a little so you can decide between the two which you like best. Please disregard the different…

Downloads
483
Likes
43
Rating
0
P
PrintablesPrint-Head

(Thicker) Mini SHOE Horn with HONEYCOMB Cut-Out | REMIX

(Thicker) Mini Shoe Horn with HONEYCOMB Cut-Out | REMIX Made a HONEYCOMB Cut-Out remix from the great original model and added a hole/honeycomb version for the thicker version of the shoe horn as well, the original hole was a bit too…

Downloads
477
Likes
101
Rating
5
P
Printablesthall72
Downloads
475
Likes
31
Rating
0
P
PrintablesFireproof710

One Piece Compliant Blaster Double Thick

This is a remix of the excellent compliant blaster found here: https://www.printables.com/model/540528-one-piece-compliant-blaster I decided to print a double thick version of the half size blaster. Simply scale the model 200% on the…

Downloads
473
Likes
66
Rating
4.17
P
Printablesfreemanowe

No drill cabinet door and drawer handles for 18mm thick panels

Simple cabinet door and drawer handles with 2-sided tape mount for 18mm thick panels (3 size variations). Made for temporary use until I decide what will be the permanent “style” - although they are tougher than I initially thought. Only…

Downloads
465
Likes
79
Rating
5
P
Printablesedmogeor

Pinecil, TS100, TS101, TS80 & TS80p Case - Improved Stand (M3 Heat-set Insert, Finger Pull, Thickened)

I had a few issues with the existing version of the stand for @termiman's and @PjotrStrog's soldering iron cases. The stand was a loose fit in the case when stored, causing it to fall out, and it was slightly fiddly to remove. The stand…

Downloads
461
Likes
45
Rating
5
P
Printablesthall72

Lego Compatible (78258.dat) Bar 2L with Thick Stop and Pin Holes

This model is compatible with the lego system.

Downloads
456
Likes
32
Rating
0
P

Qidi Thicker Filament Holder

Original Qidi filament adapter given to me from Qidi. I have posted the original and a simplified version I have created with a much lower file size. Both files create the same adapter. These work great for leveling the bed, so keep an…

Downloads
455
Likes
20
Rating
5
P
PrintablesWiseone

Thick Bag Clip

Yet another bag clip. Here is a useful bag clip that closes on a thicker folded plastic bag or similar, typically at least 1mm thick. This design is inspired (well done to phil38) by another design seen on Thingiverse,…

Downloads
451
Likes
51
Rating
4.88
P
Printablesthall72
Downloads
451
Likes
41
Rating
4.5
P
PrintablesHeliosmaster

Thickness Gauge

Originally uploaded by nat_blundell

Downloads
450
Likes
88
Rating
4.89
P
Printablesthall72
Downloads
448
Likes
60
Rating
5
P
Printablesthall72
Downloads
440
Likes
48
Rating
4
P
PrintablesJKtech3D

2020 Extrusion Slot Cover (thicker walls)

Slight modification to make the walls thicker to make it more durable when printed using ABS. Scale to your needs.

Downloads
437
Likes
30
Rating
4.67
P
Printablestacokittah

Thicker border Remix

Version with a thicker border so it isn't so flimsy, modified connection points for easier parts removal, rounded corners of catapult arm for comfort, reinforced pivot pins, condensed assembly guide to two pages per sheet.

Downloads
434
Likes
62
Rating
4.75
P
PrintablesJoe Malovich

Simple Indoor Glider V2 Thicker Wings BEND THE TAIL TIPS UP AND ADJUST THE ELEVATORS.

Wings are now more than one layer thick, more durable. BEND THE TAIL TIPS UP AND ADJUST THE ELEVATORS.

Downloads
420
Likes
36
Rating
4.67
P
PrintablesSander Leenders
Downloads
413
Likes
18
Rating
0
P
PrintablesHelvedo

IKEA Alex Headset Holder for 16mm thick drawers

Hi i remade this Headset holder for the IKEA Alex Drawer mine was 16mm thick so the original one didnt fit. hope that helps some of you printed in eSun PLA+ with the generic PLA set on the Bambu Lab X1C

Downloads
409
Likes
65
Rating
5
P
PrintablesTORO

Desk Grommet for many hole sizes and plate thicknesses

For those who want to cover a frayed, drilled hole in their desk. Diameters are according to holes drilled by means of saw rims with standard sizes of Ø 25 mm, 32 mm, 38 mm, 44 mm, 51 mm, 57 mm, 63 mm. The desk grommet/hole cover provides…

Downloads
403
Likes
53
Rating
4.88

Cyber Thunder - Carbon 13 thick conversion kit

This is basically a port of the Thunder Thighs kit for the new Carbon 13 figure, with some cyberpunk styling added to my personal build As per requests on the older kits, this one includes pretty much all the parts, so you don't have to…

Downloads
403
Likes
91
Rating
5
P
Printablescreateinc

Screw Cap Container M - Non Vase Mode - Double Thickness

It's a simple remix, the original didn't really work all that well with a 0.4mm Nozzle so I made this that is sturdy when printed with a 0.4mm nozzle.

Downloads
400
Likes
77
Rating
4.89
P
PrintablesViperXT

Flipper Zero Case - Thicker Hinges

This remix adds a bit more material around the bolts for the hinges and latches so that they are less prone to breaking when adding the M3 bolts. I used the original 4mm latch. I printed the case in PLA and the hinges in PETG. You will…

Downloads
398
Likes
60
Rating
4.5
P
PrintablesFibonacci

Thicker Desk Headphone Mount - reversed cable holder

Headphone holder like the source model, but with a large enough mount to fit on thicker desks. Made to fit on a butcher-block counter slab standing desk conversion.

Downloads
389
Likes
29
Rating
5
P
PrintablesBYU CMR

Thick-Panel Miura-Ori Fold

Summary This design, developed by JingYi Yang and Zhong You at Oxford University, showcases a very useful technique for adding thickness to certain origami patterns. By alternating hinges on the tops and bottoms of different sections, and…

Downloads
388
Likes
55
Rating
5
P
PrintablesGorroth 1007

iPod Classic 5G (Thick) Case with Hexagon Back

In Case you need the slim version: https://www.printables.com/de/model/554008-ipod-classic-5g-30gb-case-with-hexagon-back-and-mo Deutsch: Nach einigen Anfragen zu einer Version meines iPod Cases für die dicke Varianten des iPods (160GB),…

Downloads
375
Likes
25
Rating
5
P
Printablesraymond_w

MK4 buffer-frame-holder-reduced-hook_thickness

The MK4 "x-carriage-back" was able to hit the frame hook of this part so I adjusted its width. After publishing this I found that a cable tie on the x-carriage cable outlet can interfere with this by about 1mm so I added…

Downloads
374
Likes
22
Rating
5
P
PrintablesdotStudio

Simple Pottery Foot Thickness Gauge

This tool is designed to provide a quick and intuitive way to measure the thickness of a vessel's base during throwing, allowing you to accurately estimate the amount of clay remaining for final shaping and refinement. How to Use: Place…

Downloads
372
Likes
145
Rating
1
P
PrintablesTol

Tweety thicker legs

I seem to have not very good orange PETG filament and when I tried to attach the legs to the body, the thin legs always used to break. I printed many legs on Ender3V2 and broke them all. Finally I've contacted reddadsteve and he suggested…

Downloads
369
Likes
42
Rating
4.8
P
PrintablesMiha
Downloads
369
Likes
128
Rating
5
P
PrintablesLoXiRe

Asus Zenfone 9 / 10 Parametric Case. you can change thickness and camera bumps and holes easily - TPU Print

Hi I made this case for my Zenfone 9 today . I hope you like it . I added two versions thin one with camera bump and one with thick back (I Printed the back with blocks of no top and bottom layers to get the nice infill pattern) Print in…

Downloads
368
Likes
26
Rating
4.8
P
Printablesthall72
Downloads
368
Likes
39
Rating
0
P
PrintablesRahmi

Open Stitch Marker (2mm thick)

This version is sturdier than the original thanks to increased thickness.

Downloads
366
Likes
43
Rating
5
P
PrintablesMetikumi

Sturdy Box with Lid and Thick Walls for Transparent Filament

This is my design of a box with a lid with intentionally thick walls to be printed with transparent or translucent filament. The walls are 4mm thick, which makes the box very robust, but more importantly, it will look great if you print…

Downloads
364
Likes
53
Rating
4.67
P
PrintablesBen V

Wall of Fire (40mm wide x 25mm high x 10mm deep/thick)

I liked the look of this wall of fire from thingiverse, but wanted to remix for the tabletop board game Raptor https://boardgamegeek.com/boardgame/177639/raptor , which needs 40mm wide-sized pieces. I also wanted to give a solid base, so…

Downloads
363
Likes
39
Rating
5
P
PrintablesSFer

Honeycomb Storage Safety Glasses Holder (For thicker glasses)

Remix of Jaatinen's Safety glasses holder for the honeycomb wall storage. Made to be capable of holding thicker glasses

Downloads
357
Likes
56
Rating
4.73
P
PrintablesPeter Farell

Star Wars Chopper: Thick Mini Version.

Star Wars Chopper: Thick Mini Version. Added an even thicker version (2/11/2025) Aptly nammed “Chopperthick.***” Small parts should be more stable. Thanks Ben for the feedback!

Downloads
354
Likes
144
Rating
4.5
P
PrintablesAlessioT20

Pacman Remix with Thicker Mouth Roof

I really like the original model, but the roof of the pacman mouth was very thin and it delaminated, so I designed it from scratch trying to be as precise as possible with the original model, fixing the mouth roof. This is my first model…

Downloads
349
Likes
25
Rating
4.83
P
Printablesvg1

Filament Spool Clip v4 - Thicker Tip

Keep Your Filament Tidy – Now Stronger Than Ever (V4) An improved, compact, and user-friendly clip designed to secure filament ends on spools—preventing unwinding and tangling. Now in Version 4 , featuring thicker tip. Ideal for storage,…

Downloads
343
Likes
21
Rating
5