364 models
The ideal third arm for your workshop or office. Much more than just a tool. This is the multifunction and electrified tool holder. Light, extraction fan, pliers, vices, phone charger/holder, ... a large number of electrical or mechanical…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
"It spoke of ambition. It spoke of optimism. It spoke of a thing made beautiful because it could be, with little consideration given to cost or effort. The Third Horizon was a work of art, symbolic of the great Republic of worlds it…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
The files are made for a MMU3 (here with MK4) Whereas the Chars (I|O, + and -) are changeable Also the used Extruder, here Main (Display 1) = 3, I|O, + and - = 1 Bracket X for place for two additional mosfet (fan and Led strip) There is…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Remix of xacto knife cap by kitlaan . If you use knife pen with 10mm diameter, this may work for you as well.
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the 3D model "Virus in the Third Dimension: The Art of Self-Assembly." This unique design replicates the biological process of viral self-assembly by using 12 separate components, each requiring 10 magnets (I used 3 mm x 2 mm…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
Stackable Insertbox 2x3 units in footprint, 1/3 height, 4x2 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-27 v2.3…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for PETGSource material: PET
Just slide the individual colors into the template. Must use a hammer.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
This is just one box of a bigger system with more than 100 variants in size and partition. Find the whole overview here. compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
This 3D model is a compact EDC Quick-Access Third-Hand Holder , designed to temporarily secure everyday objects during tasks that normally require more than two hands. It acts as a reliable “third hand,” enabling efficient, controlled,…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
This 3D model is a compact EDC Quick-Access Third-Hand Holder , designed to temporarily secure everyday objects during tasks that normally require more than two hands. It acts as a reliable “third hand,” enabling efficient, controlled,…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
This is a fully printable third hand to help with soldering small parts or to hold something still while you work on it with your two other hands. The clip has to be printed with supports for the part that attaches to the “snake”. You can…
I had a novel idea - a font composed entirely of 45-degree angles at maximum. This led to the birth of NoBridgeScript, currently in its first draft. I foresee numerous tweaks and refinements ahead, but the vision is clear: a font where…
Introducing a unique and sturdy modular helping hand for soldering and PCB work. My design features a flexible arm system with precision-engineered ball joints that ensure excellent maneuverability while holding delicate components…
This version of the lightsaber is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
This is a 3D modeled body cap for the Micro Four Thirds Platform. This design features a rotation stop so you cannot over turn the cap. There is also a position marker on the front of the lens cap, like the genuine body caps.
it can connect up to 4 hands (clips) if needed installation order: base (small/large)+ ball heads (minimum 2, and up to 4) + multiple arm links + clips/wire holder + clip joint you can add a magnifier and using the glass from small…
This is a recreation of Dani Clode's Third Thumb project. I've been working on this for approximately 2 years. Here's a BOM: PLA (or any other rigid filament) TPU (or any other flexible filament) PTFE tube (ID=1mm, OD=2mm) Fishing line…
I had a need for two 1/3 measuring cups. Rather than buy two sets of measuring cups to only extract those needed measures, I came up with this measuring cup design. The measuring cup design has a simple handle and is intended for…
All models must be printed once. No supports needed. My print settings: 0.6mm nozzle Layer height 0.4mm infill 15% The token holders for the Mythos tokens are another design of mine:…
I designed some medals for a Minute To Win It competition we were having, and thought that someone else may find them useful.
Composition guide to look through when framing photos
Update 7/18/2025: You can find the latest version of this design, which includes a desiccant holder at the link below: https://makerworld.com/en/models/1613938-gridfinity-watch-stand-with-desiccant-holder#profileId-1702837 Description…
I didn't want to wait on an order of alligator clips and whatever else so I brewed up a quick system from existing components. Most other ball and socket articulating arms had open areas in the socket and broke along layer lines, these…
I liked the original design, but instead of 3D printed clips, I wanted alligator clips made of metal at the end. Therefore, I quickly started Fusion and designed a suitable adapter. Of course, I do not want to withhold this from you. I…
Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 70 Perimeters: 5 or 6 Supports: None Print Orientation: Default as modeled.
⚠(DISCLAIMER)⚠ MY MODELS ARE PUBLISHED UNDER THE CC BY-NC-SA 4.0 LICENSE: https://creativecommons.org/licenses/by-nc-sa/4.0/ You are welcome to download, print, share, and remix all my designs with credit, but you may not sell any of my…
MDF / Laminated Board 18mm Corner Clamp – “Third Hand” Support This is a simple and practical corner support designed for 18mm MDF and 18mm laminated boards . It works like a “third hand” – helping you keep panels aligned at 90° during…
Purpose I wanted to create an easy-to-use, compact and portable third hand or mini vise to use when soldering small wires on my electronics and also when working in my car. This can sit on a table lying flat or stand vertically - what…
I designed this Third Axis Leveling Tool for archers. The screw is recomended with 100% infill. You may have to recut the M10 ISO threads. I used the following bubble level:…
I printed a wall of 6 x wall-honeycomb-224x190size(mk3s).stl sections. When I came to put a border around the edge, I could not find a side piece that fit the final spot. I probably goofed something up, but remixing this piece seemed the…
Bins can stack and still fit inside a closed packout. Print standing on the side with a brim. no supports needed The lids swing out of the way when not in use. These do NOT fit the tall rectangle bins. Note: The middle print has a small…
Perfect collection to print metallic or cartoonish. These are the characters included: - 16 ANDRIOID - 17 ANDROID - 18 ANDROID - 19 ANDROID - DR. GERO Thank CREATIONSISHI for this spectacular pack
This is a third hand holder inspired on https://www.thingiverse.com/thing:2860825. The joints are held by friction so its possible to adjust the position with a little bit of force. Its recommended to use metal washers between the screws…
The triple containers sit on top of the Milwaukee Packout 8 inch Half Height vertical Divider design or a single container can be used with a single ⅔ container.…
This is a model of the standard Micro Four Thirds lens mount. This is the male portion of the mount that is attached to the rear of a Micro Four Thirds lens. Dimensions were taken from the lumix G Vario 45-200mm f4-5.6 lens mount,…
This design is based on kits that use a small fan and a torch light. The fan is claimed to cool solder joints and to blow away soldering fumes. Blowing it away in your direction. So I looked for a small printable fume extractor. The small…
This adapter allows you to use a m42 lens on your micro four third camera. Infinite focus saved with this adapter
I was inspired by loringczroby's beautiful work on his PackMan Boardgame, so I decided to make the Third level (my favorite) of MsPacMan with an appropriate size to fit my Ender-3 bed. This board will need 3 colors: black, wood brown and…
Solder station - third hand - helping hand v3 17.03.22 - add wiring diagram 19.03.22 - add corrected version of the base 29.01.23 - added arm tin welder holder components: 80mm fan crocodile clips:…
Hey everyone! 🤗 I’ve got another awesome creation for you! I designed a base for a third hand with four arms. 🛠 This handy tool helps keep everything in place, whether you’re working on a project or need an extra set of hands while…
So, my gf needed a case for her lenses, but we found none (or no cool one), which she could just drop into her backpack when not in use. And so i went and took the lenscap from babr, and the threaded container from Engineering_Aesthetics,…
First of all, this is a remix and all credits go to Wolfchild who created https://www.thingiverse.com/thing:378926 which is on its turn based on http://eigenbaukombinat.de/invasion-der-loetfanten/ I liked the straightforward design, but…
Varaha may be depicted as completely a boar or in an anthropomorphic form, with a boar's head and the human body. Depicted here holding an iron-club, a conch, a discus, a sword, a javelin in his hands and making the abhayamudra (hand…
Before folding, it is a good idea to check the folding manual so that you have the necessary nuts and bolts.
A reliable Third Hand Soldering Station designed to make soldering and electronics work easier, safer, and more precise. Equipped with adjustable arms and alligator clips (not included) to securely hold PCBs, wires, or small components in…
This adapter allows you to use your Sony E/FE lenses on your Micro Four Thirds camera for macro photography. Because of the difference in the depths of the mounts for Sony and M4/3, and the thickness of this adapter, this adapter is…
Reva, the Third Sister's, lightsaber as seen in the Obi-Wan Kenobi show. Can be split in the middle to become two halves (as seen in Part V). 292.4 mm x 145.69 mm x 34.92 mm, assembled. 32 mm nominal hilt diameter.
Material: ball -> PETG (is more flexible) other -> PLA Other material: 8mm rod (aluminum, fiberglass and the like) 5 x 25mm rod steel M3 and M4 screws, nuts M4 washers steel nail 2x20mm adhesive skid protector 20mm Option: metal profile…
Tool to hold electronics while you solder them. Springs used: 25mm - OD 10mm The clamps in the pictures is the 2mm tip version but I recommend the other one for stronger holding. I also recommend putting heatshrink on for extra grip. Has…
Here is a Tilt-Shift Adapter that can be configured to attach Canon EF or FD lenses to an EOS-M camera. Old FD lenses will allow to select the f-stop. EF lenses will have wide open aperture and the adapter allows for detailed control of…
I had a side project needing a 20v source at a time when name brand chargers were unavailable except at scalper prices. The Elefly DCB112 solved the charging need very well for $20. But annoyingly and surprisingly it doesn't have a built…
c'est bien mon modèle (f3d a l'appui) vu la simplicité de modélisation je n'ai même pas eu envie de chercher. pas de complexité pour l'impression
Remix of Watchthenlearn's "Dewalt Pro Shallow Organizer - Divider Inserts or Bins"
My wife is always having me cut a particular medication of hers into a 1/3rd and 2/3rds section to allow her to take 2/3rds of a dose. I found the original Pill Cutter on Thingiverse and gave a lot of thought as to how I could modify it.…
We use a lot of different filaments when printing with our Flashforge Dreamer machines, and so does you probable, otherwise you wouldn't search for this? I created this holder to help me solve the issue of other filament spools not really…
Fan Art of a painting by Skadivore (Pauline Vob) Fixed for 3d printing. Moved some things around to help it sit correctly and print easier. Thickened and smoothed some areas.
Wall mount for the ThirdReality Zigbee Temperature and Humidity sensor found on Amazon ( https://www.amazon.com/dp/B0BF9W3WMK ). I made this because the sensor doesn't have any native way to mount to a wall and I couldn't find any…
Stackable Insertbox 1x1 units in footprint, 1/3 height three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2 initial public…
This flexible third hand is the perfect extension for the Soldering Station . The actual arm is made by giufini from his Thingiverse profile. You should definitely take a look at his brilliant designs. Because I use a metal sheet as the…
I make places for neodymium magnets of 12mm in diameter and 1.8mm in height at the bottom. I extended the clamp and moved it horizontally to the side. I made posts suitable for the holes for starting points. All the print settings are…
A lens cap holder remixed from https://www.thingiverse.com/thing:3111709 I use it for my usual set of m4/3 lenses: Olympus 14-150 mm (58 mm lens cap), Olympus 14-42 mm EZ (pancake, 37mm lens cap) and Panasonic 1.7/25mm (49 mm lens cap)…
Prusa Lack Enclosure Corners/Cones if you are using a third table for height. Positively locates top two tables on 3rd.
Summary --- This is a 3D printable body for the plastic lens element from a FujiFilm QuickSnap disposable underwater camera. The Fuji website claims this to be a 32mm lens, which comes to 64mm equivalent on M4/3, from what I understand. I…
This is a CAD model of the Micro Four Thirds camera body mount. Measurements taken from the lens mount on the Panasonic Lumix DMC-GH1 with a 4 digit Mitutoyo caliper. The CAD was composed in Solidworks 2013. The renders were done in…
Gridfinity box for standard cooling tube from Aliexpress with 1/4PT thread and for two 10mm neodymium magnets. In case you missed Gridfinity:
I haven't been able to find the factory cupholder insert at a junkyard, so I took a stab at designing my own. Fits a large Nalgene and a normal sized cup.
Fully printable third hand Features: -multiple pivot points -may be used to hold wires or light objects -number of barrels may be adjusted if needed -printed with PETG with 25% infill -optional pads printed with TPU Pro tip: -Fittings may…
Summary Print your Q-Tips dispenser to organize your cotton swabs in style! New to V3: Optimized design for more durability and less material usage - the best Q-Tips dispenser for now! Advantages Thinner walls for less material usage, but…
Introducing a set of invaluable tools designed to streamline the process of bleeding your bike's brake disks! These third hands, specifically tailored for the task, come in different versions to cater to various needs. The H2 variant is…
When I packed a parcel or a gift, I prepared the tape stripes on a table edge. And as you know, very often the tape stripe glues fix to the table, no chance to take it away. This is the reason why I thought about it and found a solution…
MFT to Canon FD Adapter (customizable) This adapter allows you to mount Canon FD lenses on a Micro Four Thirds (MFT/M43) camera. The design consists of two parts that can be screwed together using 3x M3x10 screws. The holes are sized with…
A clean, realistic 3D model of the Citroën C3 III (2016–2024), designed for creators, hobbyists, and automotive fans. The model captures the signature rounded shape, compact proportions, and modern French styling of the real C3.
First attempt at modifying an existing design. A simple remix to add a third row so I can have one nozzle type per row for brass, copper alloy, and hardened steel.
The model is made for convenient soldering blow dryer operation when it is convenient to use both hands in work. This unit holds the heating hair dryer while providing enough distance for working and protection the surface of the…
Presenting a useful cable holder that acts as a "third hand" during soldering work, making it easier to stabilize and solder two wires together. It ensures precise cable alignment, which is crucial for a strong and clean connection. •…
Stackable Insertbox 1x2 units in footprint, 1/3 height three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2 initial public…
If you built the Prusa Lack enclosure, you will recognize this item used to connect the enclosure to the base and also to support the Plexiglass and door hinges. If you want to add a third table, you need something similar or the top two…
Remix of HolzMax Toothpick to fit in the third plus scale slot. Perfect to carry a toothpick and the Firefly Firerood in a plus scale victorinox. Printed with 0.1mm layer height. Instruction to open the third slot from Felix Immler:
The original Creality K1 series camera is widely known for its unreliability and mediocre video quality. This model is a remix of the AngryCam camera mount that allows to install a much better third party camera, either IMX179 or OV5640,…
A weatherproof (probably - use at your own risk) enclosure for the Third Reality zigbee contact sensor. I made this so I can mount it onto an outside gate. This is the sensor in question. EDIT: Added another version of the magnet holder…
I wanted to mount some of my ThirdReality Motion Sensors in a corner. I designed this model to solve the issue. I used VHB Tape to affix the mount to the wall as well as to affix the sensor to the mount.
Stackable Insertbox 1x1 units in footprint, 1/3 height, 1x2 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2…
Stackable Insertbox 1x1 units in footprint, 1/3 height, 2x2 grid three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-19 v2.2…
Used to mount a ThirdReality motion sensor in a corner. https://www.amazon.com/dp/B09MVKWBFF ? Category: Household
Allows using a Zigbee contact sensor on a garage door. Designed to be attached with double sided tape.
Just a little resizing for holding this sensor
This a third brake light housing for an e46. The one on my car just snapped so I tried making a 3d printed one. My car is a coupe so I dont know if it differs to a sedan or postfacelif cars. Design is quite crude but it does what I wanted…
Für mein nächstes Projekt habe ich eine helfende Hand gesucht zum Fixieren bei Verklebungen und zur Positionierung bei der Montage. Da ich nicht das Passende fand, habe ich selbst dieses modulare System entworfen und gedruckt. Alle Teile…
Third working brake light for the 3DSets Jeep Rancher RC, using 5 micro LEDs from Aliexpress https://it.aliexpress.com/item/1005005930441321.html?spm=a2g0o.order_detail.order_detail_item.3.2122582fN0Fgup&gatewayAdapt=glo2ita The third…
Another useless and ugly accessory for fiat panda. (third series, since 2012) Parts: Cup Ring, to be pasted over cup Top. 4 mm metal pin Cup and ring parts have been separated to avoid the supports Beware of the size of the hinge,…
Miniature Vice + Table clamp + Third hand
I needed a cube split into 3 equal pyramids like the one shown here for my students, so I made one. The dimensions are 60×60×60 mm.
Used Walter's SCAD (Thingiverse) parametric model to build this Omnifixo case or box. Remodelled the lid with emblem of Omnifixo (graphics copy, then traced in CorelDraw!, exported as SVG and imported in TinkerCad. Eventually redrew all…
I lost My Olympus OM-D E-M10 Mk3 lens cap in an outdoor photo session. I could buy a bunch of those for a few bucks on Amazon, but I decided to print it by myself, instead. Here on Thingiverse a good number of interesting clip-in lens…
This is a remix of DorffMeister's corner mount for the ThirdReality Motion Sensor. Like the original, you use 3M VHB tape or command strips to attach the mount to the wall. I added the box to insert the motion sensor into instead of using…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Stackable Insertbox 1x3 units in footprint, 1/3 height three of them stacked are as high as a full unit compatible with Sortimo/Bosch/Auer/others in size many variants available, see the link below Changelog 2022-06-20 v2.2 initial public…
This is just one box of a bigger system with more than 160 variants in size and partition. Find the whole overview here. Stackable: three thirds/two halves make one full height All dimensions shown in the linked overview above compatible…
