Nike of Samotrace - Winged Victory of Samothrace 60 cm tall
I've scale the model up to be 60 cm tall, then I mod the base, cut the model in 7 pieces ad lock pin and paint support for each piece.
- Downloads
- 584
- Likes
- 113
- Rating
- 4.8
107 models
I've scale the model up to be 60 cm tall, then I mod the base, cut the model in 7 pieces ad lock pin and paint support for each piece.
Nike of Samothrace Monument. Quite a few of these milling about. Should Have checked… So I may just add a head and some arms. BIt of research first. Recently I visited the Martin House (Frank Lloyd Wright) in Buffalo New York and saw this…
For my latest version, which is meant to be easier to build, see Nike of Samothraki on Prow, Simplified . The original sculpture and her warship pedestal were found in the ancient Sanctuary of the Great Gods, on the island of Samothraki…
Nike is a goddess also known as Winged Victory. A statue of her was found at the Sanctuary of the Great Gods, along with a pedestal in the shape of a ship's prow. This design is meant to produce a replica of that statue and a replica of…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint
A 3d scan of a replica of the ancient greek sculpture “Nike of Samothrace” also known as “The Winged Victory of Samothrace”, a masterpiece from the greek Hellenistic era (around 200 BCE). The original resides in Louvre, Paris. Scanned…
NOTE: If you have trouble with pins use file horizontal pins v4. 0.1 to 0.2 layer height Support Free Infill 4-15 % You will find a roman numeral on each plate so that you know how they are placed: I, II, III. Category: Puzzles
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Winged Victory of Samothrace -Added head and arms in my own imagined version of what it would have looked like in its original unbroken form. Historical design considerations considered but not thoroughly studied. Love to hear from some…
(interpreted) complete Nike of Samothrace Monument Added arms, head, and laurels. used random noise displacement to copy roughness on arms and head.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
You can print it with the new tree supports.
It's a simple drop-in replacement for the rev trigger. I find it annoying to mis-press the rev trigger so easily, so I made this. It still allows the player to use the main trigger as a 2-stage trigger.
My first stab at a Thrall from Destiny 2; i'd never seen their back before, so had to free-style it. There's a good deal more detail on the faces, but for what ever reason my camera simply would not focus on them properly.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Hand of Thrawn Data Card Field Notes were Acquired: -→ Verification: Confidence High. Step 1: Identify the subject and context The subject is the recent find of a datacard resembling the Hand of Thrawn datacard, which contains strategic…
long live the queen because she is turning 60 this year Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Doesn't Matter Resolution: 200 Infill: 38 Filament: PolyMaker PETG white Category: Creatures
This should be a simple print, use supports, I prefer the "snug" variety for this model. I have included a 3mf with the parts pre oriented. Hardware is minimal, requiring the following: 2x m3 nuts 2x m3x10 SHCS Print this with 5+ walls,…
I made small adjustments so that the structure doesn't become weak, and I also added the circle for attaching it. I recommend printing slowly to maintain the quality. I recommend reducing the printing speed to 70% either from the machine…
Finally, there is a holster for the X-shot Thrasher. Holster and belt loop printed separately for your comfort and customization, then attached to the holster with dove tail and a 12mm M3 socker head screw. Choose between 30mm or 45mm…
Created Through Heroforge.com Tabletop minis for DND that I have made for either myself or my players.
print to max size and glue with E6000. Can shift bottom down and cut away some of the pedestal.
Behold, Tharrak the Enthused, a member of the elite Stompaxe Infantry of the Vogland Orcs. Printed on: Piocreate Halot X1 - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully 🗡 Presupported for easy resin…
Insert to store the items from the Jungle of Delthrak expansion of Heroquest. Cards, dice, script and figures enter. The inserts are divided into 4 spaces so they can be glued, but if you have a large format printer, I also add the file…
Should glide a little bit smoother in the tracks, and now has the ports closed off on the visible side.
Thank you to Nicholas Karr ( @NicholasKarr_3153046) for all the help designing the mag. There is a video here For it to work properly you need to spray the drum & mag adaptor with a thickish layer of silicone spray lubricant . For the…
One of my first projects with HueForge, made it black and white to capture the contrasts better, you can use colors! Instructions for printing: Layer Height: 0.08 First Layer Height: 0.16 Color Changes: Black: Until Layer 9 Dark Gray:…
Anthrax Band Sign As with most just resize to what you want and color if you have a color printer. I tried to keep the logo’s as original looking as I could, I made these for my wall not to sell & figured someone else might like one as…
Thrasher brand multicolor keychain prepared in different layer heights per color. 4 different colors Follow me, I will upload many more models. thank you so much.
The Thrall model is a 3D model exported from the popular video game world of "World of Warcraft." To make it more accessible for various purposes, the original 3D model was converted into a low-poly version and then transformed into the…
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
Lo-res scan of a sculpture of Mithra slaying the bull
a quick model I made when testing Nomad sculpt on my iPad. I have included a High res model and a low res model for your choosing.
Most war leaders wear their authority like a crown. Thrakka wears his in his mouth. He leads not with clever plans, but with the simple, brutal example of his own insatiable hunger. Every piece of his jagged, gnaw-forged armour is a story…
The thrasher is an excellent blaster however it isn't quite accurate enough for me out of the box. The internal barrel is simple and there's lots of room in there, so let's stick a BCAR in there! I originally wanted to put a version of…
Updates 2026-06-10 Add a larger version of battery door (as shown in the 3rd pic) Key Features Expanded Battery Bay: Fits larger batteries, specifically optimized for the Tattu 650mAh 3S LiPo (16mm x 29mm x 56mm) and similarly sized…
The reverse of a stencil I made for spray painting as I couldn't find one online. The Chimaera symbol from Thrawn and Star Wars.
Trashbins is the most overlooked feature missing in cars. Use this frame to fit a plastic bag in the midconsole, so you can hold your car tidy. Fits Mitsubishi Outlander 2019-2022 (please give feedback if it fits other models as well,…
Used for a Tamiya Dirt Trasher, based on DF-01 Chassis.
This is a remix of Thrasher rev trigger delete by @jcworks_3790582 Changes: I added a small ramp on the bottom of the part. When installed in the blaster, this allows it to be squeezed upward/inward with your middle finger (this naturally…
Vhorlath Realms – Season II: Shadowed Empires Dark Elf Veyrathra Spider Matron 3D printable STL miniature for dark fantasy tabletop RPGs, miniature painting, collecting, display, and wargaming armies . The Veyrathra Spider Matron is a…
I sculpted this model in Blender for fun, I intended to eventually 3D print it and eventually did. Thought I would upload for others if wanted :) Sorry for the glossy petg I printed it in, would look a lot better matte
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
6x6 @120% Straight forward file, this one should be very easy, currently printing
0,2 mm Schichthöhe 3 Wandlinien 15% Infill
Thrak Blackbanner carries more than the standard of the Gravefang Tribe—he carries its reputation. Where the blackened banner rises, the Gravefang are never far behind. Thrak earned the honor of bearing the tribe's war standard after…
Front Sight - Color Contrast X-Shot Thrasher Front sight to get a color contrast with the dark grey rear sight. I've adjusted it that it would line up with the blaster’s stock rear sight.…
This is the model that is used by Thrawn in rebels. Make 12 insignia blocks, 3 red, 6 blue, and 3 yellow. I had to use orange instead of red.
You’ll know Z’thra by the humming. It isn’t a song; it’s the sound of a thousand hungry mouths vibrating in unison. She’s more parasite than person now, a withered husk held upright by the massive "Queen Grub" fused to her spine. When she…
A simple Fidlock mount for the thrasher, also compatible with Midlock but may not be suitable for one handed removal from the Midlock system. The mount was designed to allow the blaster to sit as low as possible when mounted on the belt,…
Fits SynthRacks 84HP EuroRack Rails using the M5 csk bolts they supply.
“Thrasher” pins for Crocs shoes, colors in a single layer, to print change the color of the object.
Front mounting bracket for the body. Used for a Tamiya Dirt Trasher, based on DF-01 Chassis. Holes are 2mm
A base that can be used for miniatures or other things. It is based on the Mithraic symbols in HBO's Raised by Wolves.
A 1:1 scan of a marble figure. A beautiful miniature for your desk, slightly cheaper than marble The original statue can be purchased from: Gips Art & Design GmbH [email protected]
Update 29/08/2026: By request, I have added an additional version of the rear sight which features openings in the top of the sight block to allow for light gathering (when used with translucent filament pieces) much like the front sight.…
Brass support for 34mm Condenser Capsules to make a 1st Order Ambisonics Tetrahedron Mic. Is has to be printed with CNC. Capsules are inserted by pressure. This ensure the electric contact with the brass support. The support can be…
Stylized Character Figurine (3D Printable STL and 3MF) Add a playful collectible to your shelf with this stylized character figurine, designed with rounded toy-like proportions and a clean silhouette. This original figure is built with…
its an option to mount 20x20 stacks
Sythra Webstalker is a swift hunter from the outer reaches of the Spider Queen’s brood, bred to locate prey long before the larger killers arrive. Lighter and more agile than the heavily armored Nightfangs, Sythra moves quickly across…
100x160mm signs, inspired by the music of Anthrax. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into which this and the rest of my sign collection fit.
The last of the iconic beasts to get a version on Beast in Show since I have already made Baloths, Tyrranax, and Gnarlid minis If you want to help me keep making free models or to tell me what I should make next please check out my Patreon
I made a longer neck and dummy for the Xshot Pro Thrasher. -Feel fre to use this model for commercial use.
This pre-painted multi-color 3D model captures the famous Hellenistic masterpiece, Winged Victory of Samothrace, depicting the goddess Nike with sweeping feathered wings and flowing drapery on a square pedestal base. Sliced for standard…
M-Thrax bridge-laying support vehicle based on the Chimera hull. Blue flat bridge is meant to be made of cardboard or plastic. The Maximus Thrax bridgelayer named after an Emperor of Old Terra, was designed to lay a combat bridge while…
Turn your little one’s Tripp Trapp into the Iron Throne in between Mealtime The TrayThrone for Tripp Trapp is a decorative add-on designed to fit the back side of the Stokke tray , perfectly visible when stored in your TrayDock . Because…
Explore the depths of the planetary psyche with this meticulously sculpted representation of Mother Aughra. Rather than focusing on simple physical traits, this model captures her individuation —the process by which she became one with…
This is a Hook that clips on the rods of a Radiator. So you can hang things from it. I use it to store my Laundry Rack. No Supports required No Glue No Screws This model is made for rods with a diameter of ca.25mm Printed in PETG with 3…
It's a holster-ish thing for the xshot thrasher. BOM Parts you need include (only if you print the top plate thing) 4 M3 16-20 screws and (if you choose to print the latch thing) get velcro or magnets once the magnet version releases. How…
Legolas Son of Thranduil — Bust Inspired by J.R.R. Tolkien's Writings This bust for 3D printing portrays Legolas, son of Thranduil, drawing inspiration from J. R. R. Tolkien’s writings for its interpretation of the character. This…
Replacement foot for thrash bin. It's recommended to wrap the last part with some string/wire for additional strength. Last part wraps around the small stick.
A simple thrashbag holder for max. 72mm diameter rolls. Print in PETG, 2 layer walls with some infill is enough.
This .3MF file is completely free to download, print, and use however you see fit. There is no paywall, membership, or hidden charge. Once you download the file, it is yours to enjoy. Print it for yourself, give it as a gift, customize…
You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. Design Concept This model is inspired by the iconic Thrasher Magazine logo combined with…
I'm personally not a fan of dual stage triggers, so I made this to remove that functionality from the Thrasher, so now the firing trigger is completely independent of the rev trigger. As an added bonus, this rev trigger also smooths out…
Note: these ears take up 4.5 rack U.
Overview This is a bracket to secure the midlock attachment knobs designed by Chance to an Xshot Thrasher. It uses 4x m3 heat set inserts (5mm x 6mm) and 4x m3 screws. I'm using m3 screws because it's what I had on hand and they work with…
Print 1x of everything and 2x of the C Clips. (If a particular attachment does not work please comment so I can fix it) From @RedCowl 's original post This should be a simple print, use supports, I prefer the "snug" variety for this…
Custom organizer for the HeroQuest: Jungles of Delthrak expansion. Keeps miniatures, cards, tiles, and quest book organized and easy to access. 🖨 Printing Settings Bottom Layer Boxes: Walls: 2 | Infill: 15% | Supports: None Top Tray:…
This is a wheelset I made for my Thrashbag cart in my garden. The original wheel where verry flimsy and broke after a year. I made this over eningeerd wheel replacement. Just print in PETG and mount. You'll need to drive the pins into it…
I had some problems with the supplied long brackets with the wingtip hitting the glass. This extends the model out, lowers it to avoid the glass and includes a cable run cover which should push fit and hold well. If it doesn't just widen…
Enter a dark fantasy world with this collection of highly detailed character busts, created for 3D printing, painting, and display. The collection features an expanding cast of fantasy and horror-inspired figures, including vampires,…
What is better than a shark? A shark with laserbeams!! This is a cosmetic Mod for the popular Deathracer Radio Control Combat System. The face of the shark comes from the excellent printable sculpture "Megalo-Rex" by @PrintedEncounter ::…
To build this lamp you will need: this Flask E14 Socket 2x E14 Socket Nut E14 Lightbulb that is 50mm wide at max (to fit into the Diffuser) 19 x M4 30mm Bolt 9 x M4 Nut Plaster Use white ABS to achieve warm color filtering effect on the…
Behold, Tharrak the Enthused, a member of the elite Stompaxe Infantry of the Vogland Orcs. Printed on: Piocreate Halot X1 - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully 🗡 Presupported for easy resin…
You’ll know Z’thra by the humming. It isn’t a song; it’s the sound of a thousand hungry mouths vibrating in unison. She’s more parasite than person now, a withered husk held upright by the massive "Queen Grub" fused to her spine. When she…
long live the queen because she is turning 60 this year Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Doesn't Matter Resolution: 200 Infill: 38 Filament: PolyMaker PETG white Category: Creatures
Thank you to Nicholas Karr ( @NicholasKarr_3153046) for all the help designing the mag. There is a video here For it to work properly you need to spray the drum & mag adaptor with a thickish layer of silicone spray lubricant . For the…
Thank you to Nicholas Karr ( @NicholasKarr_3153046) for all the help designing the mag. There is a video here For it to work properly you need to spray the drum & mag adaptor with a thickish layer of silicone spray lubricant . For the…
Fits SynthRacks 84HP EuroRack Rails using the M5 csk bolts they supply.
Note: these ears take up 4.5 rack U.