Funnel for Coffee Grinder Timemore Chestnut C2
The model can be printed without support material.
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
- Downloads
- 39
- Likes
- 6
- Rating
- 0
117 models
The model can be printed without support material.
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
video Timemore diy motorized 3d printed automated coffee grinder - YouTube Autodesk Fusion 360 assembly (f3z) included. Stl files and 3mf files included. Or you can generate it from Fusion 360. DC motor is available also on conrad web…
An indicator to the timemore sculptor 078(s), to help with setting the grind size.
This is a replacement lid for Timemore's Chestnut C2/C3 coffee grinder as the original has a tendency to break after some time. I recommend one of the 46mm variants in order to minimize the amount of microplastic in your coffee. The…
No support required. Kept the rest intact for strength and adhesion. Printed the first 3 layers in red and the rest in black with a manual layer change. Can also black out the top part with a sharpie if you don't like the whole top layer…
Designed this as changing grind settings on the timemore 078s can be subjective from where you look at the indicator, hopefully this will make it easier and more consistent to set the dial
The spacer aligns itself through 2 10x3mm magnets like the original dosing cup. The height with spacer is the same as the original. Magnets are held in by glue. .sted File is included
The ring gets press fitted on the knurled part of the rotating knocker. You may need to scale it up or down a few % to get the fitment right.
These designs take a lot of time and experimentation to get right, but I still keep it free to download. If you enjoy the model and want to contribute to my next bag of coffee, it would be appreciated :) I made this because my attempts at…
This is a work in progress! This is a model of the images found here: https://www.reddit.com/r/Coffee/comments/tfp8gg/timemore_possible_upgrade/ I used their images to make this model. You can then go on Shapeways and order it in whatever…
This is a lid I've designed for a friend which did work very well. This part replaces the one that goes between the grinder itself and the handler. You need to remove the original bolt, remove the plastic lid and replace it with this one.
Switch the original Delonghi Dedica espresso machine drip tray for this one to maximize the space under the portafilter to fit a scale and a decent size cup. Two versions are provided: Universal - just a flat platform, Timemore Black…
Made a Timemore Chestnut C3 plate with additional 12 click for a total of 24 adjustment per rotation. Not sure if it will last long as the gap between each circle is too thin that the ball on the screw cap might break it sooner or later…
I designed this model to conveniently store this TIMEMORE burr grinder: https://www.amazon.com/dp/B092MDTGGR There are spots to hold each of the pieces that come in the kit. There are also some indentations on the bottom so rubber feet…
added a groove in the middle of the pointer Remixed from https://www.printables.com/model/636606-timemore-sculptor-078-
Remix of https://www.printables.com/model/167884-aeropress-station with the following changes: Grinder slot modified to hold a Timemore C3 Pro + measuring cup (https://www.printables.com/model/452207-timemore-c3-pro-measuring-cup)…
Super simple funnel for Timemore Chestnut C3
A Timemore Chestnut C2 attachment that provides a way to store the handle vertically alongside the grinder while also providing dust protection for the funnel. Should likely work on the C3 (please confirm with a comment). For a perfect…
A version of the minimal Sculptor 064s grind indicator reticle optimized for AMS/MMU painting
This is an adapter to allow any hopper with a 35mm diameter fitting to be put on the timemore sculptor. I designed it around fitting this model by Jkim_makes , but should also fit other hoppers intended for the XeoLeo style grinders, like…
These designs take a lot of time and experimentation to get right, but I still keep it free to download. If you enjoy the model and want to contribute to my next bag of coffee, it would be appreciated :) Same basic hopper internally as…
Holder for Timemore C3 grinder with spray and accessories. Spray bottle diameter is cca 26mm. I made 4 versions: V1: handle position above the holder with and without text on the sides V2: different posiion of handle with and without text…
I made Spacer/Pedestal for Weber Workshops Blind Shaker to reduce coffee grounds falling outside of shaker. Designed to fit the Timemore Scultor 078 series. (may work for other grinders too) I had some 3mm x 1,5mm N35 magnets lying…
Key points taller hopper with steeper angle which prevents the beans from sticking to surface (especially when spraying with water) anti-popcorn that allows to hot start and dump all beans at once with open cover use original top cover…
Wall thickness is 2.4mm so it is easily printable with 0.4, 0.6 or 0.8 nozzle. Printed with 0.6 nozzle and 0% infill. Real picture is with slightly bigger pointy end.
Minimized travelling cap for the Timemore - Chestnut C2 coffee grinder designed to be aligned with the top of the coffee grinder barrel not to consume any more space and to save the filament. The cap should prevent remaining coffee bits…
This is a 10mm scaled version of the Timemore C2 container. It's perfect for hiking and camping when every gram matters - you can save up to 70 grams printing this container.
Tricholder for Timemore Chestnut C5 / C5 ESP handgrinder. It's 2-in-1 accessory: funnel (or trichter) & handle holder. Compatible with Timemore Chestnut C5 Series.
Timemore Chestnut C3 handle holder. Hesigned to be printed in TPU or other rubber like filament. Prints without support.
E61 (58 mm) style portafilter holder for Timemore Sculptor coffee grinders. Should work across both 064 and 078 series. Aligns with the grinder chute using magnets similar to the original catch cup. Tested with the Decent portafilter, but…
This is a simple cap for the Timemore C2 coffee grinder. So you can put it in your travel bag without spilling out coffee dust everywhere. EDIT 2022/09/26 I added a new version which is tighter. As I noticed the previous version could get…
Single Dose hopper for the Timemore Sculptor 078 Print upright like it would sit on the Timemore, use normal supports (not tree/organic). Be careful when removing the supports as to not rip the anti-popcorn cone out as it is very…
I was having issues with clearance between top of my scale (Timemore Black Mirror) and the bottom of the portafilter, since the scale is quite tall. So was struggling to find cups/mugs to fit between the two. All changes made to give as…
Timemore Chestnut C2 Cap + Holder. Now you can store both the handle and coffee grinder in one convenient place! Edit V3/3.1 versions is for Chestnut C3 Printing tips: Suggested orientation in the picture, no supports needed. There are…
The Unity-of-the-Bee version of the electric interpretation of a manually hand-cranked grinder offers several practical advantages for any interested user: The housing consists of only 5 individual parts and has been optimized for a print…
A pretty simple travel kit for the non-foldable crank models. Take the crank and the grounds jar off, put the cap on top, put the bottom holder in, screw the jar back in, aaaand you're ready. I had better luck printing the cap in the…
Simple funnel for loading beans into Timemore Chesnut C3 grinder. No more spilled beans on the floor.
Here I made a stand for the Stagg EKG electric kettle. It has the option for a Timemore scale slider that allows you to easily slide in and out a Timemore Black Mirror with very little friction and also without worrying about messing up…
This funnel is an aeropress inspired funnel sized for the Timemore C2 hand grinder. It sits on top to help load beans wi
The simplest travel case that can be created. 😎 Both parts of the travel case hold 16 small 3 x 3 mm magnets that I bought on Aliexpress. The connection itself is strong enough to avoid disconnection during travel. The model has been…
An glue-less add-on to make reading the chosen settings easier especially when you are exhausted.
Made perimeters thinner for the right balance of Function x Material used 1.35mm thick wall Saves less material
I designed this coffee grinder holder to attach my grinder to my Aeropress Skadis Caddy (from Rifnshred). All other models needed too much filament and I wanted one which can hold the TimeMore brush also but without wasting space on the…
Simple travel cap for Timemore Chestnut C3. Designed to be printed in TPU or other rubber-like filaments.
Coffee bean loading funnel sized for a Timemore C3 ESP Pro with an ID of 1.845”. Printed on a Creality K1C at 20% infill. No raft. Standard 220C temp nozzle. Hyper PLA filament.
A stand which fits a Timemore Pro X kettle base. The drawers can be used to store filters or other coffee accessories under 25mm in height. Underneath the drawers there is 30mm high space to store a scale for pour over coffee Recommended…
timemore chestnut C2 holder with a spot for the cleaning brush! the timemore c2 is somewhat top heavy and falls over pretty easily, so i designed this holder to make it a bit better the bottom diameter is 82mm, instead of the default 51mm…
This is a portafilter holder/tamping stand for the Timemore Sculptor grinders. It holds a portafilter. It has a magnet in the bottom to snap to underneath the grinder, like the included catch cup does. It has a bottom to catch any drips,…
Fits over the bottom of the Timemore C3 Pro coffee grinder, to measure the amount of bins to grind. Fits tight but not so tight that it's hard to pull out. The vacuum holds it in place for a few seconds when lifting up the grinder, but…
UDPATE: I wanted to improve on this further but hit a wall (i had already tried 12-15 concepts) and decided in the end to design a hopper. If you want to give this a shot obviously feel free but if you want to go all in, check out the…
A small grip to prevent hand cramps while grinding lighter roasted coffee with the Timemore C3. The little wing should keep the grinder from turning in your hand (so you don't have to squeeze as hard). Should also fit the C2, possibly…
Replacement for a broken Timemore C2 coffee grinder lid. The grinder sometimes struggles to fit 30 g of beans in the hopper (depends on size of the beans), which is a common dose for moka and pour over. So I made the lid in such a way to…
Don't print in PLA. PETG works okay but I would suggest a filament that can handle higher temps.
I could not find a protective cover for my Timemore Black Mirror coffee scale online so I made a simple one. PLA or PETG 0.2 layer height 0.4 nozzle no supports
I printed in PLA using the following settings: 0.4mm nozzle 0.2mm Layer height 5% gyroid infill 4 perimeters No supports Make sure to print it with the larger opening facing down (last photo as example), use brim if you face difficulties…
A fully parameterized funnel designed to mimic the look of the Aeropress funnel; this one is designed to fit in the hopper of the Timemore C2 hand grinder.
A grind size indicator for the Timemore Sculptor 064(S). Attaches to the side with double-sided tape. Makes it easier to read the grind size more precisely.
You can use it for grind different ranges (settings) and take out. i used petg with 3 perimeters and different layer thickness - 0.15 in thread area. fuse skin 0.05/2mm (exept thread) you need to calibrate shrink range of your filament…
I recently purchased a manual coffee grinder which came with a small cleaning brush. The subsequent acquisition of an air blower has added to the number of tools floating around on my kitchen counter. This simple print should hold two…
Timemore 078S Hopper , Hopper cover and a bonus Dosing Cup cover Magnet are 5mm X 1.5mm ( Amazon.com: GXHUANG 200pc 5x1.5mm Disc Round Decorative Refrigerator Magnets Office Magnet for Fridge,Office, Craft, Science Projects, Art : Home &…
This is a print in place, ratcheting handle that makes turning the grounds knocker on a Timemore 078 a little easier. Simply slide the printed part onto the original ground knocker. The friction fit is all that's needed.
My scale has always slipped on the drain grid and I wanted to avoid touching the hot boiler. Therefore, I designed the drip grid, which holds the scale in its position. Accordingly, uses filament which the temperatures can well withstand.
This turns the Timemore C2 (or C3) into an electric grinder ! It uses magnets for ease of cleaning and to allow the user to be able to change the grind size with taking everything apart. Instructions : Main body : print on the back,…
I designed this Skadis Holder for my Timemore Chestnut C3 Pro coffee handgrinder based on the Skadis Secure Clip System from mkingery. The Handgrinder fits really good in this holder (not to tight but not too loose as well). For mounting…
Best pepper grinder is a coffee grinder, turn your C2 into a pepper grinder with this cap. I recommend doing a test print of a few initial layers to ensure it fits snugly into your grinder, you might have to adjust horizontal expansion to…
This is a reference model for TIMEMORE Coffee Scale with Timer Basic Mini
I had recently acquired a Timemore S3 Coffee grinder and was storing it in a drawer. Due to the motion, the coffee grinder would often threaten to fall when opening and closing the drawer. I needed something with a wider base to offset…
2/14: I'm planning on making the funnel a little taller. I'll get around to it tomorrow. - Done Bottom fits the 51-54 bomber. I'll need someone to provide me measurements for the 58mm so I can make it. You'll want to use 2 10X3 magnets…
Print the threaded travel cap with 0.1mm layer height in order to have better results.
Designed it using tinkercad Used 25% infill with .15mm layer and my choice of filament is PETG. This is my very first design and I was really happy that it fits on the Timemore Nano, the hole's diameter is 10.3mm with a depth of 12mm to…
3D printed AeroPress carrying case with Timemore Nano coffee grinder nested inside perfectly.
Coffee Grinder Funnel Designed for coffee enthusiasts, this funnel makes grinding mess-free by guiding grounds directly into your container. With a snug fit and easy-to-clean design. Print Settings Printer Brand: Creality Printer: Ender-3…
3D model of Timemore Nano with hand crank folded and separated.
Timemore C3 grid tray is full metal and I was always afraid I'd scratch the worktop with it. I designed this pad part to
Simple model to make your coffee workflow with two cups easy using the nano version of the timemore blackmirror coffee scale. sliced with prusa slicer. Print the buttom plate with PETG. layer hight: 0.15mm quality → Pretty PETG 2020…
Spacer that keeps the coffee scale platform from touching the rear cover on my espresso machine, preventing variation in the measurement.
Simple grind setting indicator made for Timemore C2 coffee grinder. Printed on Ender 2 Pro with ABL enabled and 0.24mm layer height
Some manual coffee grinders have small capacity cups to collect the grinds. The Timemore Chestnut C2s is an example. This adapter enables the use of a larger catch jar on a C2s grinder. I do not know if this adapter fits other grinders.…
Stronger core for coffee grinder timemore c3, the original fail sometimes. I printed it upside down with supports, 4 walls, and 35% infill. Make sure you install the upper grinder correctly, i assembled it upside down the first time. The…
You shouldn't store the Timemore Slim Plus coffee grinder with the handle attached, which is why I designed this small cap so it doesn't collect dust. Also useful for travelling so nothing gets between the burrs such as pens or coins for…
Shown in the picture in gold PLA, but PETG should also work. Fits over the grinder, tight enough that it won't fall off when picking the grinder up but loose enough that a vacuum cannot form when pulling it off.
Printed in PLA. I used an 18X5mm magnet for my print. Weighs about 93.2 grams empty so the magnet functionality should still work. .2 or .28 layer height with 10% infill should work. Use tree supports for the bottom magnet hole. If you…
I made this funnel for my coffee grinder of the model: TimeMore - Slim 3 S2C grinder Simple to print without supports. The model is also customizable with OpenSCAD to fit different sizes and needs.
To have your beans ready on the go.
I like to travel with my coffee gear which currently consists of an Aeropress, a grinder, scales and various tools. The latter tend to rattle about in whatever I'm carrying things in. This simple print should hold two tools each up to 9mm…
Simple and easy holder for coffe grinder. Include place for cleaning brush and coffe spoon. Modeled for TimeMore C2 with external diameter 55mm. Print recomendations: Should print well with any type of plastic (I used PETG) Use at least 3…
The Timemore Sculptor comes with a lovely magnetic catch cup, but it's just barely too big to use neatly with a 54mm portafilter (such as on most Breville/Sage espresso machines). This is an alternate 3D-printable catch cup for the…
I wanted a way to make my workflow cleaner so here it is. You'll want to print the filter basket side facing down with tree supports. A 10x3 mm magnet is needed for the base. I printed mine in PLA and it's working well. If you like this…
Riser for espresso scale to bring the cup closer the portafilter bottomless portafilter. The STL are for a Timemore mini scale. For assembly superglue the feet to the base The base is for using cappuccino cup The removable extension is to…
See @Adam_113335 Timemore Sculptor Portafilter Holder
This is a custom funnel designed to fit the Timemore manual coffee grinder, making it easier to pour coffee beans without spilling. The model includes two versions : A ribbed shape for a classic look and smooth bean flow A wavy shape…
Prints without supports, wider part down. I used .12mm layers (adaptive layer thickness, shown on the photo) for threads. You might as well print solid. If my PLA version fails I'll update the description, otherwise use your favourite…
Link to onshape project: https://cad.onshape.com/documents/eeccd3089bbf2cbb6f8b5721/w/77ac7ba8d4f1ddeee653b5c9/e/2bc171e
This is a grinder non-slip cover for TimeMore grinder G series. You might need double sided tape to stick it to the grinder. I print it with TPU, it works perfect for me.
Keep your grinder and cleaning brush neatly stored together with this specially designed container.
After a standard black shell failed on me I set about modeling a replacement one. Translucent filament required for reading screen; might model one later with a grid of small holes above the display for shine-through on non translucent…
This stand is designed to hold the Timemore C2 grinder and a water spray bottle, fitting perfectly on the IKEA Nalblecka countertop organizer. It helps keep your coffee setup neat and organized while maximizing space efficiency. Provides…
The step part can be directly imported into prusa and the split by bodies.The step part can be directly imported into prusa, then right click on the model and select split model→by parts. I would recomend as well to print the dowel in two…
Do your hands hurt when grinding coffee on the go with your Chestnut Slim grinder? Here's the solution. Recommended print settings Material: TPU 95A Nozzle: 0.4 or 0.6 Walls: 2 Infill: Gyroid @ 5, 10 or 20 percent, depending on how soft…