Search results: tis

Sort order

5,088 models

P
PrintablesHarms3D

Tissue Box Cover #1 - curved Stone Pattern

A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…

Downloads
10,786
Likes
4,507
Rating
4.95
P
PrintablesHarms3D

Tissue Box Cover (smaller, square) #2 - curved Stone Pattern

A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…

Downloads
922
Likes
183
Rating
4.92
P
Printableshvrkh

Stylish Tissue Box Pillow

Stylish Tissue Box Pillow Add an elegant and modern touch to your home with our Stylish Tissue Box Pillow. This chic cover easily slips over a standard tissue box, instantly transforming it into a tasteful piece of decor. For tissue boxes…

Print approx. €10.46–€12.79 excl. taxPreliminary estimate for one variant

Downloads
833
Likes
350
Rating
4.5
P
PrintablesEnta

Cable routing and desk cover / Schreibtisch Kabelführung mit Abdeckung

Easy to print Print instructions Rafts: Not needed Supports: Not needed

Downloads
595
Likes
123
Rating
4.4
P
PrintablesPeter Farell
18+

The source marked this model as adult content.

Print approx. €8.61–€10.53 excl. taxPreliminary estimate for one variant

Downloads
563
Likes
150
Rating
4.5
P
PrintablesLudo B

Aziatische hoornaar val. Asian hornet trap. Piège à frelons asiatiques. Trampa para avispas asiáticas.

Om dat mijn zoon last heeft van de Aziatische hoornaar liet hij mij een Aziatische hoornaars val zien met wat uitleg. Zo ben ik dan begonnen met te tekenen, en printen. De val kan maar begin volgend jaar getest worden. De aanvallen…

Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant

Downloads
400
Likes
20
Rating
0
P
PrintablesPeter Farell

Jean-Baptiste Carpeaux, La Danse

Groupe en pierre d’Echaillon H. 420 ; L. 298 ; P. 145 cm; pds. 18000 kg Paris, musée d’Orsay In 1863, Charles Garnier, the architect of the new Paris Opera, commissioned four sculpted groups from four artists who had won the Prix de Rome…

Print approx. €15.31–€18.72 excl. taxPreliminary estimate for one variant

Downloads
387
Likes
98
Rating
0
P
PrintablesPeter Farell

Mary, Jesus, and John (the baptist)

Removed most of base. Added uv texture. smoothing after rough texturing. Note: No-commercial usage in the orig cc lic.

Print approx. €11.44–€13.98 excl. taxPreliminary estimate for one variant

Downloads
361
Likes
67
Rating
0
P
PrintablesMichaX

Bosch PBD40 Bohrtisch T-Nut Mutter M6

T-Nut drucken mit PETG infill 100% ohne Stützen Düse: 0,4mm Schichthöhe: 0,2mm Die Fläche mit dem Sechskant auf das Druckbett. Zwischen Sechskant und dem Loch ist eine Drucklage um das Loch drucken zu können. Nach dem Druck einfach mit…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
289
Likes
39
Rating
5
P
PrintablesJothejecker

Tissue box with TV remote support / Boite à mouchoir avec support pour télécommande

EN : My girlfriend and me gonna search a tissue box with 2 compartments for our TV remote but never find the desired one, I made it myself this model to store different remote standing up to have an easiest way to catch it and to limit…

Print approx. €33.93–€41.47 excl. taxPreliminary estimate for one variant

Downloads
261
Likes
109
Rating
5
P
PrintablesFvones

Tiskátko do keramiky/těsta - vločky / ceramic/dough stamps - snowflakes

velikost se dá libovolně upravit ve sliceru ---------------------------- the size can be adjusted freely in the slicer

Downloads
246
Likes
48
Rating
5
P
PrintablesBioBene42

MultiSpool

Jede MultiSpool, die Du zu Hause aus PLA druckst sollte keiner Temperatur über 60°C ausgesetzt werden! Wir empfehlen eine Drucktemperatur von 195°C – 220°C Beheizte Druckbetten sollten auf 60°C eingestellt werden Außendurchmesser:200mm…

Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant

Downloads
204
Likes
19
Rating
5

Artist's style (Collapsible) Card Easel / phone holder

prints flat in 1.5 hours, easily assembled and creates a miniture artist's easel. Designed to display business cards. Strong enough to hold an iPhone 13 ProMax in landscape mode or portrait mode. the pivot pin can be made from a ballpont…

Print approx. €1.18–€1.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
85
Likes
11
Rating
0
P
Printablesflarfoo

Bookshelf Support clip for Mortise-Mount Pilaster Shelving Systems

My home as several Mortise-Mount Pilaster style built-in bookshelves and I thought it might be fun to try to design the support clips as my first TinkerCAD project. The model is based on these 239 Series Steel Shelf Clips manufactured by…

Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant

Downloads
61
Likes
5
Rating
5
P
PrintablesEmma85

Tischkanten Abdeckleisten

Für die abgeschnittene Ecke der Tischplatte musste eine Abdeckung her. Also habe ich passende Leisten gefertigt (eine mit angewinkelter Kante) und mit einer Heißklebepistole angeklebt. Nun passt es auch optisch optimal zum Drucker.…

Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant

Downloads
55
Likes
3
Rating
0
P
PrintablesAntherea

tabletop football player Tischfußball-Spieler

Beschreibung Beim Tischfußball im Jugendraum war ein Spieler zerbrochen und mehrere kopflos. Die Teile des zerbrochenen Spielers wurden auf der Seite liegend eingescannt. Dabei gelang nur die oben liegende Hälfte einigermaßen naturgetreu.…

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
6
Rating
0
P
PrintablesDarkmoon

Tischständer für NiiMBOT D11 Label Maker

NIIMBOT D11 Smartphone Label Maker Kit Bluetooth Wireless Tischständer ist für den Bürotisch gedacht damit das Gerät einen festen stand hat wenn man Labels damit ausdruckt. hier gibt es ein Video -→ Video…

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
7
Rating
0
P
Printablesbeu3D
Downloads
30
Likes
1
Rating
0
P
Printablesloeschzwerg

Keine Werbung - Advertisement disconsent

Tired of getting advertisement right into your mailbox? Let me advertise this little but simple label to you. It prints in a quarter of an hour, and clearly states your disconsent about getting advertisement. Apply a piece of double sided…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
0
Rating
0
P
PrintablesTurnipToss

Prusament Modular Multispool for Samples and Filament Ends

Don't you hate it when you have those small last amounts sitting on a spool taking up a bunch of space? Use this! It is a multispool made using leftover prusament spools to hold the last~300g or less of filament. The item is modular if…

Print approx. €2.70–€3.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
19
Likes
2
Rating
0
P
PrintablesKazuyamano

TissueCase_v3 for PREDUCTS DESK

Keeping the basic structure of version 2, the front is closed to improve the appearance and rigidity.

Print approx. €12.31–€15.04 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
1
Rating
0
P
PrintablesSŠ Jablunkov

Tvorba trojrozměrných modelů map evropských států pomocí 3D tiskárny

Předmětem projektu je vytvořit 3D mapu Evropy. Žáci pomoci návodu vytvoří a vytisknou 3D mapy jednotlivých států Evropy.

Downloads
14
Likes
4
Rating
0

Jarní dekorace: Výroba pomocí 3D tisku

Cílem projektu je seznámení žáků s technologií 3D tisku a digitálním modelováním prostřednictvím praktického projektu zaměřeného na jarní tematiku. Žáci si nejprve vyberou různé jarní motivy, které ná

Downloads
12
Likes
0
Rating
0

Minecraft ve 3D tisku

Děti si podle známé počítačové hry Minecraft vyberou tzv. moba a tuto postavu dle předlohy vymodelují a následně vytisknou na 3D tiskárně.

Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
4
Rating
0
P
PrintablesRobert Vlasák

Odlévání s pomocí 3D tisku

Projekt je zaměřen na výrobu voskového modelu pro odlévání na ztracený vosk. Pozitiv existuje jen ve virtuálním prostředí, tiskne se přímo forma na voskový model.

Downloads
10
Likes
0
Rating
0
P
PrintablesKazuyamano

TissueCase_v2 for PREDUCTS DESK

Vertical orientation improved space efficiency. Also improved removability and rigidity.

Print approx. €14.06–€17.19 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
0
Rating
0
P
PrintablesRuYo Records

Tisch Vebinder Flach

Tisch verbindungen fach für 4 Schrauben

Downloads
5
Likes
2
Rating
5
P
PrintablesPrinter97

Recyclingfabrik Multispool Spulensperre

Spulensperre für die Multispool von Recyclingfabrik. Für eine sichere Spule werden insgesamt 3 Teile benötigt pro Spule. PETG ist zu empfehlen oder stärkeres Filament. Verwendetes Filament auf dem Bild: Prusament Orange PETG. Link zur…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4
Likes
0
Rating
0
P
PrintablesJarda

Návrh a tisk kelímků na vodu do Vv

Inspirací mi byl nález mých kelímků na vodu do Vv, které jsem používal ve škole ve výuce. Jednoduchost projektu je úmyslná a je kladem projektu.

Downloads
2
Likes
1
Rating
0
P
PrintablesDavid Holzbauer

Vymodeluj a vytiskni si svou školu v Minecraftu

Žáci primy si vymodelují v Minecraftu budovu školy. Žáci tercie v technickém kroužku 3D model převedou a vytisknou na 3D tiskárně. Ve výtvarné dílně dojde k finalizaci (lepení, malba).

Downloads
2
Likes
1
Rating
0
P
PrintablesIllegalBerry

Minimalist Multispool - Recycling Fabrik

This is a modular multispool meant for Recycling Fabrik filament. It uses about 110g of filament for the smallest iteration. It takes up minimal storage space when disassembled and not in use. I'm pretty sure it's not compatible with AMS,…

Print approx. €6.91–€8.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1
Likes
0
Rating
0
P
Printableszuberio

Mantis Clamp

Very happy with this creation, it's a 35:1 print-in-place dual stage planetary gear system (sun 1 : ring 2). The really cool thing is that the rings won't shift without the inner gears being turned, so no back-driving ; the arms are…

Downloads
34,091
Likes
8,578
Rating
4.84
P
PrintablesDiggle

Moai Standing Tissue Box (Fits X1/P1) 247mm Height

*I thought the MK3/4 were 250mm in height similar to most other printers in that size category, I will be working to add a version that fits the 210mm height build volume of those printers Scaled down to fit the bed of a standard 250mm…

Downloads
11,635
Likes
4,481
Rating
4.96
P
PrintablesMartin

Atlantis From Stargate Atlantis

This is my model of the Atlantis as seen in Stargate Atlanis tv series. Model is over 60cm in diameter and approaches 3 kilos. It has already built in preparation for the LED lights so if you want to make the towers and stardrive lit, you…

Downloads
9,211
Likes
2,446
Rating
5
P
PrintablesTom Stanton

Tissue Paper Glider

This plane is designed to be printed directly onto thin tissue paper (17gsm) to produce a lightweight glider. Printing tips: To hold the tissue paper to build plate, I used thin 2mm magnets (mine were 30x10x2mm, but they can be smaller).…

Downloads
8,235
Likes
2,712
Rating
4.83
P
PrintablesDobainier

Moai Tissue Dispenser

I loved this tissue dispenser from Crooked_Noozle : Moai Tissue dispenser by Crooked_Noozle - Thingiverse But it was too big to fit in my P1P and I wanted to print it in one piece. There was also the remix from Diggle ( Moai Standing…

Downloads
6,341
Likes
1,823
Rating
4.96
P
PrintablesLukesLair

Satisfying Hexagon Twist Fidget

Amazing hexagon twist fidget with a handle! It makes a really awesome ASMR like sound when moving it up and down using the handle! This fidget gives you something to mess with while working or doing anything for that matter. Very fun and…

Downloads
6,210
Likes
413
Rating
4.77
P
Printablesrauberdaniel

Artistic Cat Statue / Silhouette / Wall Art

A beautifully designed contemporary cat sculpture that fits perfectly into any modern home. A great gift for any cat lover. Looks best when printed in matte black. Can be scaled to any size but should have enough depth in order to have a…

Downloads
3,996
Likes
961
Rating
5
P
PrintablesRushy_Rush

Plantar Fasciitis Relief Massage Foot Roller

Rolling Foot Massagers for Plantar Fasciitis – 3 Styles Find relief from plantar fasciitis and/or foot tension with these ergonomic rolling massagers, available in three unique styles. Each design offers a slightly different feel to…

Downloads
3,856
Likes
999
Rating
4.97
P
PrintablesD

Question Mark Block Tissue Box Cover

Tissue Box Cover in the Style of Mario Question Mark Block. This is designed to go over a store bought tissue box so there's no bottom. Files include a split question mark for easier printing. Print the Box and Question Marks separately…

Downloads
3,654
Likes
2,173
Rating
5
P
PrintablesSil Noah
Downloads
3,270
Likes
255
Rating
3.8
P
PrintablesMZ4250

Cultist (Updated)

Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…

Downloads
2,752
Likes
190
Rating
4.44
P
PrintablesTeachingTech

Spherical port for filament dryers - Open source and parametised

Overview Filament dryers have exit ports in less than ideal places. The filament often has to bend sharply to line up with the port, which is exaggerated depending on hoe much filamnt is left on the spool. This simple design prints in…

Downloads
2,751
Likes
772
Rating
4.75
P
PrintablesIt'sMoxie

Kobra 2 "Mantis" Quick-Remove Circuitry/Wire Shroud

Hello everyone, This model serves as a cover for the wiring and board that remain exposed after removing the stock shroud from the Kobra 2 series while installing the Mantis fan duct.…

Downloads
2,713
Likes
245
Rating
4.88
P
PrintablesLoubie3D

Schrodinky: British Shorthair Cat Sitting In A Box(single extrusion version)

EDIT: I forgot to add in the name kindly given to my cat by Mark "Velocity Painting" Wheadon ( https://t.co/LF6wu0B4sd ): Schrodinky! A couple of weeks ago, I posted a very cute picture on Twitter of a British Shorthair kitten sitting in…

Downloads
2,680
Likes
425
Rating
4.96
P
PrintablesPoop

Mantis - Tibia Blade new!!!

The rings have a diameter of 20 mm, 17 mm. (Making more later)

Downloads
2,657
Likes
756
Rating
2.75
P
PrintablesWilko_SLO

Stylish Tissue Storage + Bin

Print without support Designed that cover is caught on the top of the box. It is ment for Tissue Boxes 215cm x 115cm x 65cm (should be still +0,5cm free space) Bin Cover is rolling around to easy put tissue in and to cover garbage from…

Downloads
2,639
Likes
534
Rating
4.87
P
PrintablesGizmoThrill

Satisfactory Helmet - Cosplay Replica (2 Sizes)

Replica of the main character's helmet from the video game Satisfactory. Comes in two size variations. The “large” version is for a 23" circumference head and the “small” version is for a 22" circumference head. Both sizes are designed to…

Downloads
2,609
Likes
2,155
Rating
4.86
P
Printablesmarkury

Rubber Ducky Artisan Keycap

The pre-painted multicolor version for the AMS is available here: https://makerworld.com/en/models/112578#profileId-120559 This version doesn't have enough clearance to be used on all keys, so keep it to a corner if you can. I have a…

Downloads
2,534
Likes
238
Rating
4.74

Collapsing Scottish Claymore (Print-In-Place)

This sword is designed to be printed all as one part. This is my take on a collapsing William Wallace’s Scottish Claymore. Not only is it ridiculously large but I also added another blade segment so it extends even farther. Its prints at…

Downloads
2,478
Likes
458
Rating
2
P
PrintablesDTibbs

Arctis Nova Pro Wireless Under-Desk Mount

Do you have an Arctis Nova Pro Wireless? Do you like a clean looking desk top? Do you not want to have to reach too far to adjust the volume or other settings on your Arctis Nova Pro Wireless? If your answers are Yes, then here is a…

Downloads
2,264
Likes
196
Rating
4.91
P
PrintablesPavel Brych

Venusaur - modular for easier print (Venusaur - modulární pro snazší tisk)

Venusaur pokémon has intricate flower on his back, which is quite hard or impossible to print on FDM printer in one piece (you would need soluble supports). Especially when printing smaller size figure. I used Venusaur body from…

Downloads
2,143
Likes
253
Rating
4.88
P
PrintablesAnkush Mitra

Artistic Name Plate

Its a 3d Nameplate for your office desk. Simple but very attractive design. No support required for print. Made on fusion 360, file attached for customization. Print Resolution: 0.2mm, No Support required, infill 25-30% Print Settings…

Downloads
2,090
Likes
96
Rating
4.67
P
PrintablesThreeD-Michael

Satisfying Clicking Fidget Button

This snappy fidget button is extremely satisfying and a pleasure to hold in your hand, and easy to print and assemble, the required force can be set in 9 steps, does not require any additional parts, just a few drops of lube to start…

Downloads
1,931
Likes
382
Rating
4.94
P
PrintablesMartin

Atlantis Accessories 3 - Daedalus

This is the third of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:

Downloads
1,852
Likes
379
Rating
4.95
P
PrintablesAron

Star Wars Jedi interceptor (Eta-2 Actis-class light interceptor) Kitcard

Printing: Layer height: 0.10 Supports: Yes Material: PLA, PETG, ABS… I recommend printing the first two layers more slowly. Assembly: I recommend using super glue for more stability 1.Connect the wingtips to the connector 2.Connect the…

Downloads
1,788
Likes
604
Rating
4.83
P
Printablesrandunel

No ads (advertisments free) Dino-Clip Mechanical CAM Chip-Clip (PRINT-IN-PLACE)

Removed ads (the remixer's website) and the model version, no other changes.

Downloads
1,766
Likes
160
Rating
5
P
PrintablesDevmiser

Tissue Box Covers

Tissue Box Covers in four decorative designs - Flowers, Bamboo, Hierolgyphics and Circle Pattern These covers fit Puffs brand Ultra Soft tissues perfectly, but may fit other brands as well. The supports can take some patience to remove,…

Downloads
1,596
Likes
381
Rating
4.75
P
PrintablesFlorian

Easter island moai tissue box

Bored of picking your own nose. How about picking someone else's? This is your chance! This stylish tissue box cover is not only convenient, but also very satisfying to use. It fits an 11.5cm x 23cm x 7cm big tissue box and is usable in…

Downloads
1,592
Likes
290
Rating
4.89
P
Printableseyalshtark

Actually useful Sheep and Goat toilet/tissue paper roll holder and dispenser

UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…

Downloads
1,582
Likes
482
Rating
4.8
P
Printablesh3li0

tissue box · rectangle and cube

tissue box · rectangle & cube minimalist design that comes in two options, rectangular and cube, for two popular tissue brands update / US Kleenex size has been added (x:114 y:114 z:131) as STLs important · make sure that: your build…

Downloads
1,538
Likes
350
Rating
4.67
P
PrintablesGoatGamez

Mecha Mortis - Brawl Stars

The Mecha Mortis, Light Mecha Mortis, & Dark Mecha Mortis skins from brawl stars.

Downloads
1,518
Likes
57
Rating
4
P
PrintablesPCDC

Satisfying Slider Checklist - Customizable

Easy to print, customizable text via .STEP, Snap-fit assembly! Create your own Agenda for any occasion. No support required. To ensure smooth operation and that the sliders stay in place, add some Super Lube or grease under each slider.…

Downloads
1,495
Likes
766
Rating
4.8
P
PrintablesMartin

Atlantis Accessories 4 - Aurora

This is the fourth of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:

Downloads
1,442
Likes
315
Rating
5
P
PrintablesMartin

Atlantis Accessories 1 - Prometheus

This is the first of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:

Downloads
1,440
Likes
343
Rating
5
P
PrintablesAeRop

Tissue Box for toilet paper

A tissue box with a screw-on lid. Remove cardboard core from the toilet paper roll and pull it through the opening.

Downloads
1,431
Likes
220
Rating
4.88
P
PrintablesMartin

Atlantis Accessories 2 - Destiny

This is the second of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:

Downloads
1,405
Likes
316
Rating
5
P
PrintablesJal Shah

Vintage Radio Tissue Dispenser with Small Storage Compartment

An elegant decorative piece for your home or office desk in the shape of vintage radio. But it is not just a decorative piece, it can hold regular size tissue box inside for you to be able to dispense tissues and not only that, but it…

Downloads
1,397
Likes
1,132
Rating
4.83
P
PrintablesFpstoaster

mantis tool grid adaptors

socket adapters for mantis tool grid system keeps long sockets from rolling around by standing them on an angle

Downloads
1,375
Likes
188
Rating
4
P
PrintablesAlejandraR57

Spotify Keychain with Artist Name (Multiple Artists), Camila Cabello, Katy Perry, Taylor Swift, Bad Bunny, The Weeknd, Lana Del Rey, Morat, BTS, Jesse & Joy, One Direction, Peso Pluma, Metallica, 21 Pilots, Olivia Rodrigo,THE 1975, etc.

Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…

Downloads
1,367
Likes
148
Rating
5
P
PrintablesBeo666

Minimalistischer Clicker Klicker Fidget Fun

Weniger ist manschmal mehr, so auch in diesem Fall. Mein minimalistischer Klicker ist schnell und einfach gedruckt, es wird kein Support benötigt. Das einzige, was du brauchst, ist ein Keyboard Switch. Ohne Kleben wird alles…

Downloads
1,364
Likes
66
Rating
3
P
Printablestbenen

OpenBass - Customizable 3D Printed, Multiscale, Headless Electric Bass

9/10/26: Ploutone no longer makes the headless bridges used in the original models. There may be remixes for alternate part compatibility! Welcome to OpenBass! This is my first DIY guitar project. There are many 3D printed guitar projects…

Downloads
1,359
Likes
792
Rating
5
P
PrintablesGoatGamez

Mortis - Brawl Stars

Mortis had grand designs built around being a mortician and a vampire, but the fact that nobody is dying at Starr Park has put a huge damper on his plans.

Downloads
1,351
Likes
50
Rating
4
P
Printablesk-eye

Bladeless Desk Fan - Tischventilator

Hi there! It's me again. This time I have a bladeless Desk Fan for you. This is a remix to fit on the build plate of the Flashforge Creator Pro. I redesigned everything from the beginning in SketchUp and did some optimisations to make the…

Downloads
1,295
Likes
372
Rating
4.8
P
PrintablesKocyns

Edge Tissue Box

My next tissue box for paper box Tento (110x110x120mm, WxDxH). It is possible to change the scale to fit your paper box. Print settings: PrusaSlicer: Perimeter: 2 Layer: 0,2mm No Supports Print Settings>Layers and perimeters>Horizontal…

Downloads
1,291
Likes
350
Rating
4.89
P
PrintablesReProps

Jaro Tapal/ Cal Kestis Lightsaber from Star Wars Jedi: Fallen Order

This is my attempt at Jaro Tapal's Lightsabers from Jedi: Fallen Order. If you want a double lightsaber print two of the saber emitter and two of the saber hilt as well as a connecter piece. If you want the broken saber just print one of…

Downloads
1,216
Likes
414
Rating
4.5
P
PrintablesPeter Farell

Praying Mantis

Praying Mantis

Downloads
1,211
Likes
164
Rating
4.5
P
PrintablesMocodroid

Tissue Box Basket

Tissue Box Basket. Printed with PLA, .4 nozzle, .2 mm layer height, no infill. Link to my Rope Tissue Box Cover https://www.printables.com/model/474193-rope-tissue-box Link to my Tissue Box Basket with lid…

Downloads
1,185
Likes
494
Rating
5
P
PrintablesMartin

Atlantis Accessories 6 - Ha'tak

This is the sixth and final ship of the six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the…

Downloads
1,179
Likes
262
Rating
4.91
P
PrintablesMartin

Atlantis Accessories Bonus - O'neill

This is the bonus ship designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:

Downloads
1,143
Likes
256
Rating
5
P
PrintablesLaurent Taz

spaghetti measurer (Doseur à spaghettis)

Pour Mesurer La Quantité De Spaghetti Avec 4 trous de mesure(mesure jusqu'à quatre portions pour adulte). Réduisez le gaspillage alimentaire.

Downloads
1,139
Likes
154
Rating
4.84
P
PrintablesMocodroid

Tissue Box

Tissue Box Basket with lid. Printed with PLA, .4 nozzle, .2 layer height. No infill for the box and 15% gyroid for the lid. Link to my Rope Tissue Box Cover https://www.printables.com/model/474193-rope-tissue-box Link to my Tissue Box…

Downloads
1,110
Likes
264
Rating
5
P
Printables3DPrinjoyer

Autism Metallica Logo Keychain

Inspired from this model (Not a remix) Design idea from " Autism Metallica Shirt " Print at 0.2 mm layer height In slicer set filament change post processing gcode at 12th layer Ex. In cura Update 01 Removed 3MF files Added scaled version…

Downloads
1,099
Likes
590
Rating
4.73
P
PrintablesCarl4D

X26 Taser Dummy for Airsoft / Softair , Practise drills

Taser Dummy with changeable cartridges. i used m5x35 screws and with m5x10x7 Plastc inserts Print Settings Printer Brand: Creality Printer: Ender 3 V2 Supports: Yes Resolution: 0.28 Infill: 10% @ 3 shell, 5 top/bottom Filament: Das…

Downloads
1,097
Likes
123
Rating
4
P
PrintablesChrisi999

Absaugung für Tischbohrmaschine / Suction for bench drill

Diese Absaugung kann in Verbindung mit einer Tisch- oder Ständerbohrmaschine verwendet werden. Je nach Toleranzen des Druckes muss man die Verbindungsstücke ggf. etwas anpassen. Material: PETG This extraction unit can be used in…

Downloads
1,093
Likes
197
Rating
4
P
PrintablesTomáš

Tissue Box Cover with lid - curved Stone Pattern

A remix for the Tissue Box Cover #1 but with bottom lid from the Parametric Minimalistic Tissue Box Cover . Inner dimensions are 230 x 115 x 72 mm. Check out my other remix using this pattern at Soap Dispense Box IKEA Dragon I have…

Downloads
1,092
Likes
129
Rating
5
P
Printables815 Design

Ripple Tissue Box Cover

This design is a remix of thing:5461117 When I first saw the design I instantly wanted to modify it to be a tissue box cover. I did, and now I'm sharing 😊

Downloads
1,080
Likes
256
Rating
4.82
P
PrintablesGoatGamez

Demon Mortis - Brawl Stars

Made by request. If you want to request a model just message me through Printables.

Downloads
1,071
Likes
44
Rating
0
P
PrintablesPrintPop3D

Satisfying Hexagon Fidget Toy

This is the trippy but super satisfying hexagon fidget toy! it prints in place with no support and will blow your mind! We printed it ourselves on Youtube:

Downloads
1,069
Likes
40
Rating
5
P
PrintablesGoatGamez

Otis - Brawl Stars

Otis is a young street artist on the come-up who works by shooting ink at the walls. Nobody knows his true identity, which only adds to his mystique!

Downloads
1,064
Likes
59
Rating
5
P
PrintablesMartin

Atlantis Accessories 5 - Beliskner

This is the fifth of six ship models design to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:

Downloads
1,060
Likes
249
Rating
0
P
PrintablesTmpx64

Classic British Pillar Mail Box - Money Bank - Piggy Bank - Tirelire - Gift idea - Gift inspiration - Housewarming

This money bank is big enough to contain coins and bank notes when you are saving for rainy days. The Main Body is a single piece so a color change is needed if you want to have the base in a different color. The Top part screws onto the…

Downloads
1,056
Likes
225
Rating
4.94

Apollo Automation MSR-2 mmWave CO2 Multisensor

https://apolloautomation.com/products/msr-2 The ball mount is a remix of: https://www.thingiverse.com/thing:67911 from Gyrobot

Downloads
1,041
Likes
63
Rating
5
P
PrintablesCubeVS

Satisfying spiral cone fidget toy

Fun satisfying fidget spiral toy!

Downloads
1,035
Likes
51
Rating
5
P
PrintablesMultisystem

MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design

This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…

Downloads
1,033
Likes
64
Rating
5
P
PrintablesDetailrail

Gwr 14xx 1400 class steam locomotive British rail great western railway model train model railway

Gwr 14xx 1400 class steam locomotive British rail great western railway model train model railway

Downloads
1,010
Likes
58
Rating
0
P
PrintablesAlec Keon

Keon Implant Patient Education/ Dentist Entertainment Model

Just about everything should be able to be printed without supports. Material of choice can be used, but I'd recommend something on the order of PETG strength or greater given the nature of hex interfaces. Interlocking dovetails of the…

Downloads
1,004
Likes
77
Rating
5
P
PrintablesMaster Printer

Extremely Satisfying Fidget Clicker Wheel

What makes it special This wheel started as a prototype, and four out of the five prints I did worked. I plan to make another model like this one, but this version already prints easily and has no complex settings, which is part of why I…

Downloads
995
Likes
37
Rating
2.75
P
PrintablesNat

Gayer-Anderson Cat at The British Museum, London

Model with supports for the chin, gradually smaller layers for the head and seam at the back. Thanks to the “Scan the world” project for the scan.

Downloads
980
Likes
111
Rating
5
P
PrintablesJakub Šimek

Satisfactory lizard doggo

A cute little model of our favorite game mascot - the lizard doggo😍 The stl file is so large bcs it's a very detailed model and i was too lazy to do anything about it xD Oh and be careful when removing supports I broke both of the doggo's…

Downloads
970
Likes
173
Rating
4.88