111 models
A small holder for the accessories from the ifixit pro tech toolkit. I used this holder for the pliers: https://www.printables.com/de/model/540978-hsw-tweezer-holder I used this holder for the Mako Screwdrivers and cutted the holders on…
Edit 9.8.2024: One of the screw tabs of my holder snapped, so I uploaded a more reinforced one that should definitely last without issues, also added a cutout for tightening the bottom screw after deciding it wouldn't look that bad after…
Remixed the great model by plomdawg to remove the ifixit logo
A minimalistic 6x5 Gridfinity ( https://gridfinity.xyz/ ) fixture that holds the Carvera Air toolkit foam insert. The fixture consists of 4 corner pieces that each have a cutout for you to easily label. The corner pieces are in total 12mm…
Toolkit that sits on the top of the meanwell power supply that accommodate the Allen key set, needlenose plyers etc. Printed on smooth sheet, with supports. Only suitable for printers that have a meanwell LRS-350-24 power supply that is…
23 June 2024 - NOTE: Updated model of the insert to accommodate the longer allen keys that are being shipped with new printers. This tool box holds all the accessories and tools that are shipped with the Flashforge Adventurer 5m and 5m…
13 piece pottery clay cutting and shaping set. id love to see your prints of these files.
This is a toolbox case for the A1 and A1 Mini that replaces the old cardboard box. The only assembly needed is to snap the plastic tray into the container. I'm super happy with how this turned out, especially how clean the design on the…
Print Settings Printer: Ankermake M5 Rafts: No Supports: No Resolution: .2 Infill: 20% Filament material: PLA
Imagine walking into a UV lit location wearing a picture of Darth Vader or Spock around your neck! It will immediately light up and will show everyone that the Force in fact is with you or you find something fascinating while raising an…
I tried several of the A1/Mini toolkit holders that are out there, but decided I wanted one that didnt require any additional hardware (screws/bolts) and was able to close securely covering the insert. So I started with the parametric…
Update 1/9/24: Fresh off the printer: a revamped Skadis mount, powered by your valuable feedback! This upgrade streamlines printing, hugs the skadis board tighter, and even throws in an extra hole for good measure, just in case. I love…
Various items that have an M10 thread. I got a little carried away with my path extrusion script. Note: The M10 flat rods and bolts are designed for printing flat (i.e. with the print bed parallel to the bolt axis) and have altered…
This is the 3D Modeling ToolKit for JSAUX ModCase of ASUS ROG Ally X. You can design accessories for ModCase of ROG Ally X. The mount structure of Ally X one share the same design of Steam Deck one. So you can basically use the existing…
This is my favorite 3d printed tool holder and I really liked it on my Ender 3, so I modified it to fit on my Neptune 3 Pro and Neptune 4. This may also work on the Neptune 3 Plus and Max as well but I have not tested it. I hope you all…
Say hello to our latest HB0609! The HB0609 will be shipped together with a DOCK BASE compatible with ROG Ally X, ROG Ally, Steam Deck, Steam Deck OLED, and Legion Go handhelds. The HB0609 features a replaceable acrylic sheet where you can…
This tray snugly fits the iFixit Pro Tech Toolkit (Item # IF145-307-4) in a 5x3 gridfinity sized grid.
A nice little box in a Star Trek styling! Print instructions Prints as one! Prints vertically. No additional supports should be required. Remove built-in supports for the latch with a hobby knife before trying to open the box. Remove…
An easy print that holds all of the day-to-day 3d printer tools. This piece holds: 2 pliers (or cutters) 4 tweezers or 2 tweezers and scissors (see pictures) 5 hex keys of various sizes + little paths to sit in (designed to fit Creality…
A mount for the iFixit Pro Tech Toolkit, with or without the Mako driver kit, using Multiconnect for Multiboard and direct-to-wall compatibility. Variants Full Toolkit: Fits the full toolkit with everything inside of the tool roll.…
Overview: This is a 4x4 Gridfinity holder for an iFixit Essential Electronics Toolkit (item # IF145-348-5). I noticed most iFixit Gridfinity holders did not include a way to keep the original case stored, so I designed one. This is a very…
Before printing I turned both parts over and printed using support.
This is the official 3D Modeling ToolKit for the JSAUX ModCase for ASUS ROG Ally（PC0119） . With this toolkit, you can easily design custom accessories for the ModCase, unleashing your creativity. Download the STL files to start 3D…
This is a complete simcard toolkit to aid you in converting your simcard into your desired sizing. Of course, you only can go smaller. should you have multiple simcards, you can print a simcard holder for their respective sizing too if…
Ein Gridfinity-basierter Halter für den Mako-Schraubendreher-Satz / Pro Tech Toolkit
Box for the Ifixit Pro Tech Toolkit, low edged and non-stackable.
NOTE, be careful when using a power drill to screw it in, I slightly cracked mine along a layer line because I overtightened it. not a problem other than it doesn't look perfect. screw it in and leave a little extra and manually use a…
Case to unite the ToolkitRC M7 charger and power supply in a single piece, facilitating use and transport.
I was frustrated using my Dynamite RC toolkit while wrenching on my 3D printer. I had to keep swapping the bit in the handle when it came to installing/removing different sized fasteners. Finally this handle will allow me to have multiple…
A FIXED version of the iFixit Prying Toolkit bin. Now Gridfinity-compatible with a 1x4 layout.
PARAMETRIC - Hexagonal Toolbox IT UNROLLS Flat giving you access to all drawers and pods Useful for specialised toolkits or toting around your DND mini's STEP files included so you can add dividers to pods or specialise the pods to hold…
Simple solution for using the Bosch 18V batteries as a power input source for M6D charger. For attaching the Bosch battery is used this model > Adapter with fuse >…
When you have the big parkside batteries and want to charge your drone batteries outdoor. Contact are make from 0,5mm thin copper plate dimensions 10x20mm.
Magnetic toolkit for Core One operators, including: A nozzle holder A pliers holder for your needle nose and flush cutter A screwdriver holder A holder for the original wrenches that came with your Prusa Each holder uses 2-3 10mm dia 3mm…
Meant to be a compact alternative for fitting lots of tools on the workbench Printed with 15% infill, 0.4mm nozzle, no supports (but a brim wouldn't hurt)
I wanted to add a hole for the driver and some of the bits that come with the basic toolkit you get with a battery or screen repair kit. Printed with the following specs. Printer: Creality Ender-3 S1 Material: Inland PLA+ Print Temp: 205…
I used supports on the pegs, you might not have to, but I did, so you know, up to you bb. Thanks, I love you.
THIS PROJECT HAS MOVED TO GITHUB https://github.com/IdoMagal/The-Boardgame-Insert-Toolkit/ This OpenSCAD library was created to make it easy to create board game inserts with lids for either horizontal or vertical storage, without any…
Engineered for seamless access to the iFixit Essential Electronics Toolkit, it complements and showcases splendidly on the honeycomb wall, especially when placed next to the 3D-printed iFixit Mako Driver display/shelf by 3D.Nystad
I was frustrated using my Dynamite RC toolkit while wrenching on my 3D printer. I had to keep swapping the bit in the handle when it came to installing/removing different sized fasteners. Finally this handle will allow me to have multiple…
Features Removable power bank tray The power bank tray slides in and out easily, and is secured with clips. Accessing your 18650 batteries is very fast. Furthermore, the 18650 holder is an off-the-shelf part requiring minimal soldering…
Gedruckt in mattem PETG von Extruder, 0,2 mm Layerhöhe, 15% Infill und organischen Stützen die Haken
A simple holder for the iFixit Pro Tech Toolkit that works with the honeycomb storage wall.
This is a direct replacement for the foam insert you received with your Carvera CNC toolkit. Using this insert, you can place gridfinity organizers however you like. The main insert, that you can't change, holds the screwdriver, pins,…
BMW part number 71111117440, holds the trunk-mounted toolkit closed. This is a remix of Schraube für Bordwerkzeug for BMW vehicles by macgyver125 . I split the single body into 3 parts and attach them with a 30mm M3 screw and locknut.…
Printed in PETG in 0.1mm to 0.15mm layer height. Simply clip it on.
If you have the ToolKitRC M6, you know how fragile the tiny little feet on the bottom can be. I broke one of those feet after a few months of use and then there wasn't any good way to make sure the fan on the bottom had airflow during…
New v 2.0 with additional Containers for extra stuff :) Feel free to leave a like it helps a lot to motivate me V2.0--------------------- Printet sucessully on my mk3s 20mm Layer height 15% Infill Bamboo Standard PLA white V1.0…
Print instructions Supports Needed: No, Bed Plate Adhesion Needed: None, Print Orientation: Print upright with the bottom on the build plate, Materials: PLA, PET-G, etc.
This model adds Peglock compatibility to the iFixit Pro Tech Toolkit holder originally designed by @toxvrd. Mount it by placing two Board Attachments on your pegboard with one empty hole between them. The attachment plates on the back of…
Swapped to using Gridfiity to provide standardised boxes within my project draw and needed somewhere to put the original Creality toolkit. Final design is a 2x8 grid with sufficient room around to tools to enable easy selection. If you've…
The original feet on this device have two relief slots, which makes them way too flimsy. They almost seem as though they were engineered to fail. These replacements have just one slot so they're stronger yet still have enough flex to be…
iFixit Pro Tech Toolkit Skadis Holder 129mm x 54mm
Keep your Creality Ender 3 V3 KE toolkit organized and within easy reach with this custom pegboard holder! Designed specifically for the V3 KE's included accessories, this holder is a crucial Quality of Life upgrade for your print…
//English + // Italian // English Parametric toolkit to generate any type of under cup or anti-tipping. It manages glasses, bottles, flasks and cans of any diameter and height, both circular and of other shapes (eg square or hexagonal or…
posted this due to popular demand and people asking, posting as a STEP file as it can be easily worked with and modified for someones specific toolkit. Enjoy people!
Ich habe für das iFixit Essential Electronics Toolkit eine Gridfinity Halterung konstruiert. Das Innenleben des Kits welches aus Schaumstoff besteht könnt ihr einfach entnehmen und dann in das gedruckte Teil einsetzen.
Use this to add a drawer and stability to a shelf and fully support the hexapod toolkits ( .6 tolerance) standard default size. not currently parametric Print instructions Paint a line of supports on teh inside of teh bracket midway (like…
Bambu Lab H2D Toolkit to store extra pieces from the printer. Uses a magnetic lid. Magnets (Glued in Place) ->…
Customized version of http://www.thingiverse.com/thing:2241113 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2241113 Instructions Using the following options: cut_angle = 20 sizes = [ 4, 3, 2.5, 2, 1.5 ]…
Inspired by the Charging Case created by Turtle laboratories ( https://turtlelaboratories.com/blogs/projects/portable-field-charging-box-for-isdt-q6-rc-charger ) I decided to make my own field charging kit using the newly acquired…
This is a simple bracket for hanging a ToolkitRC P200 power supply underneath a shelf. There is also space underneath for the power cables.
Are you looking for the right tools to improve your 3D models? You want to perfect the look of your models and make any imperfections disappear. There are many tools available, but which ones are the most effective for sanding? 🤔 Share…
emergency kit for after print works
Introducing the Y.A.S.T.T. (Yet Another Stupid Tick Tool) – because the world definitely needs another tick remover, right? Dive into the overcrowded ocean of tick tools and discover the Y.A.S.T.T., a marvel of 3D-printed ingenuity that…
Fits the iFixit Pro Tech Toolkit (#IF145-307-4)
I got me a ToolkitRC M7 charger, it is quite nice ! No one had made a case for it yet so i mocked something simple up. I use a decent amount of XT30 batteries as well so i put a holder on the front for an XT60 to XT30 adapter, there is…
This toolkit holder clips into place and can be slid across the top bar to hold the toolkit in vertical or horizontal orientation. This version of the toolkit holder includes a slot in the back for storing a secondary build plate. All…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs This is a 3D-printable tabletop simulation toolkit designed for clinical simulation, hospital and prehospital…
As original legs are very fragile i printed new with the same design and dimensions as original. Fits perfect on my Toolkit RC M600 model. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2…
This is a cover for Lantian 24V power supply that is used often with lipo chargers like: ToolkitRC M6 ToolkitRC M8 ISDT Q6 You can buy this power supply here LANTIAN 24V POWER SUPPLY This simple cover protects from electric shock. It was…
Needed parts: USB-C PD module (I used 20v PDC004), 2 part epoxy, Wires, XT-60 female connector.
This is a custom Gridfinity module designed to hold the iFixit Pro Tech Toolkit in its original case! Built at a 3x5 footprint and twice the height of a standard Gridfinity module (10 units tall), this design provides a perfect snug fit…
Remix of https://www.printables.com/model/358201-tool-hanger-for-ender-cr-30. Includes a cutout for if you have the Linear Rails on your Y-Axis.
Ultimate lab toolkit I present to you the ultimate lab toolkit , low cost and great versatility. It is a modular design, easy to assemble and to which various pieces can be attached to turn it into various pieces of equipment. A true all…
More easily printable versions of the iFixit Case Lid with some fancy configurable options. This has been sitting in my drafts due to a missing image for over a year now, whoopsies. The picture of the printed lid is what happens when you…
A simple bulk density measurement tool based on the following instruction made by ARPRO: https://www.arpro.com/contentassets/ddc7e343f45d45408103709f5bcfe153/arpro-bulk-density-measurement-instructions-en.pdf This set adds another…
A simple box with secure sliding lid which holds the few basic tools for the MK4 printer: Heating block wrench Nozzle Wrench T10/T8 wrench T6 wrench, 2.5mm allen wrench (2 places, I put in a spare) 3mm allen wrench 2mm allen wrench 1.5mm…
A regular pentagonal bipyramid can be made with the norm 5 and norm 4. Connecting two pentagonal bipyramids together requires the 90 deg 1 and 2. There is a left and right orientation. Edge is used to connect along one of the square sides.
Printed from TPU D58 shore with 0.6 mm Nozzle. For 48/50 parts Toolkit flat model. At the bottom there is a little hole so that air can escape when the kit is inserted.
This is a set of connectors to make connected dodecahedrons. The ones that are named stellated are for stellateing a pentagon face. Simple is for a plain triple connector. Inter is used for connecting two dodecahedrons face to face.
About the design This WERA micro driver holder revision allows for the storage of WERA #118008 & #118010 straight-blade drivers which are 20mm longer than the other micro drivers. It is built upon the terrific original tool holder design,…
Designed for out-of-office client meetings, impromptu sketching, UX evaluation—grab what you need from the phone itself! This backplate accessory has friction-fit pockets for: mini sticky note (1.5X2") pen mini measuring tape (1.25x1.25").
In Slicer negative volume modifier do not work correctly in vase mode. Here are tips how to use Blender to perform volume subtraction on vase mesh. - Import STL Models to Blender: - Resize and Position the Vase Model Over the Cut Volume -…
Customized version of http://www.thingiverse.com/thing:2241113 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2241113 Instructions Using the following options: cut_height = 10 sizes = [3, 2.5, 2, 1.5 ]…
I recently purchased a new nozzle kit for my Centauri Carbon, and everything came in a tiny box. The kit is still available on Amazon at https://www.amazon.co.uk/dp/B0FX2ST1T6 Honestly, it was a mess, and really difficult to find the bits…
Organize your RC workbench with this compact Skadis mount for the ToolkitRC M6D Dual Smart Charger . While the original design was great for all-in-one portability, many workshop setups use a dedicated power supply tucked away elsewhere.…
Calibrate E-steps, flow and hole xy expansion before printing for best fit! A side project I made while procrastinating a different one :L It includes legends for the sizes but that unfortunately doesn't show well on transparent filament.…
A basic toolkit for doing DIY chainmail. When using pliers grip rings using the middle for most grip. The opening ring work well and was designed around 18 gauge rings.
EDC Toolkit based around the Trojan 28-Piece Driver Set. It is great to stow in the glovebox of your car, bottom of a backpack etc. Lighter can be used to melt glue-stick, and there is a small space for extra items (bandaids, painkillers…
This is a TPU case for a squared shaped toolkit. One Model has fixing points. Wall thickness is 1.5 mm. Printparameters: TPU D58 shore Layer hight 0.16 or 0.2 Infill: 18% but can be more Speed depending on printer 40 to 50 mm/s ish.
bordel: French for brothel. Commonly used as a slang to designate a mess, a bunch of things, or as an interjection. Designed by kustom3 and myself. ISO shape idea from Plaketdebeur. Tested with 0.2mm layer height and 0.4mm nozzle, other…
Found a nice tin box and finally streamlined my travel toolkit. This is probably completely useless to anyone but me, but maybe someone can use it as a template. The design is optimized to reduce rattling, nothing can fall out and the…
2 part desk organiser for all of the primary 3d printing tools that are included in Crealitys 3d printing toolkit, works best with K1 series or any 3d printer with legs. This organiser was designed to hang off of the side of a desk/shelf…
Extension Storage for Essential Electronics Toolkit This modular storage system is designed specifically to complement the Essential Electronics Toolkit . The original box is great, but lacks space for the additional tools many of us rely…
I use my iFixit Essential Electronics Toolkit on a regular basis, and I wanted to be sure it was always close at hand when I needed it. This simple design allows you to slide the toolkit neatly under your desk, keeping your workspace…
