18 models
This model is just a simple remix of the Zero-Y Offset Mount to allow using the CR-Touch together with the TriangleLabs CHCB-OT Hotend. The CR-Touch mount has been extended 10mm so the nozzle doesn't hit the bed when probing. This model…
This is my remix of miniaftersherpa which should fit Trianglelabs CHC PRO perfectly, should also be alright for V6 Volcano.
Step model of the triangle labs CHC Hot end with the heatbreak for a E3D hemera Step file for integrating into a printer design. I made this model to help me design the cooler and hotend assembly for my custom printer Planning to also…
2026-04-26 - Official Trianglelabs Partner _____________________________________________________________________________________________________________________________ This mod is now officially partnered with Trianglelabs. You can find…
I installed the AL-BMG air extruder from Trianglelabs on my Creality Ender 3 Pro printer, the fan shroud that came with the kit doesn't fit properly, it sit far from the nozzle. I enlarged the shroud using Fusion 360. Print instructions…
I just took the step file from trianglelabs google drive to make a solid model for a template. It took me a bit of searching but here it is enjoy.
This is a minimalistic Ender 3 MAX E3D V6 TriangleLabs BMG mount I made for the Creality ENDER 3 MAX gantry unit.
Designed this bracket for my Voron 2.4 holding the reliable TriangleLabs RunOut-Sensor. Instead of using Festo-type Ø4mm nipples I designed the bracket for ECAS04 nipples. Those are far better PTFE tube putting in and out without longterm…
How I print? Printer: Creality Ender 3 Pro (Klipper) Material: PLA Transparent Nozzle: 0.4mm Layer Height: 0.2mm Support: Fan Duct: no — Mount: yes Screw I used: 7x - M3 x 8mm screw (2 screws for the Matrix mount at the back, 2 screws for…
Remix of the nozzle torque wrench gridfinity holder, created by @Tecknishen , adapted to the kit sold by TriangleLabs (w/ 3 sockets). Printing settings: Material: PETG (PLA should be fine as well, although might be worse for tight fits)…
- 54 full array nozzle in a tiny box. - Compatible with the genuine e3d metal case or the TriangleLab version
Update - 2020.01.29: What can I say... it works :) Update - 2020.01.22: Cosmetic improvements Update - 2020.01.19: Fixed thread pitch Update - 2020.01.18: Fix to the mounting holes This is my prototype for an adapter to mount the Dragon…
A mount for the Tchc TD6S Hotend by trianglelab wasn't included so i made my own.
M2.5 x 8 screws to mount
I wanted to add a filament runout sensor to my Voron 0.1. This solution replaces the rear right foot for one that has an attachment for a TriangleLabs filament runout sensor . This requires some additional hardware: 2x m3x4mm heatset…
A bracket for the trianglelabs filament sensor. No support needed (small bars that can be twisted out) Sensor can go on both side. A 3mm nut that is press fitted in and goes on the opposite side of the sensor, and nut support ;-) that is…
This is a toolhead design for Modix printers , intended for use with the TriangleLabs STD6 hotend , supporting either an Orbiter extruder or a Bondtech LGX Lite PRO . Hotend: https://trianglelab.net/products/std6 Extruder (LGX Lite PRO):…
The provided duct was a bit high, blowing too much air directly on the nozzle. I extended the middle by 4mm. The quality of the modification is low but it functions as intended. I recommend replacing the hotend cooling entirely for best…
![TradRack Binky+EREC Integration [TRIANGLELABS PARTNERED]](https://media.printables.com/media/prints/b846a951-067c-4c3d-89f6-c34f0f6931c2/images/10463943_481a11e9-32d7-4a1e-b6ea-e395052fe408_f037be61-9ebf-40cf-bedf-b0c07004f2dd/screenshot-2025-08-16-at-104049.png)
