Shelly TRV replacement part
Spare part for Shelly TRV. This part can be used in place of the original part, which can break if there is a collision with the TRV.
- Downloads
- 510
- Likes
- 14
- Rating
- 5
52 models
Spare part for Shelly TRV. This part can be used in place of the original part, which can break if there is a collision with the TRV.
Update 10.08.2023: Updated version with tooth which are more stable than the original one. Have you ever had the issue that the thermostat adapter was broken? Yes, it happens quite often. Therefore I created a model which can be used to…
This model was created to replace a missing standard M30 Hive TRV adapter. I printed in 0.15mm layer height in Prusament PETG. Snug Supports for overhang. Do not over tighten when fitting onto the radiator.
Replacement Hive cover to change the colour instead of painting. This is non rotating so will not be able to adjust the valve manually from the valve itself. I decided to leave the button available if required and to try and keep the…
I remixed it from lukasto to fit my needs. Only change is the M3 nut. On the original it didnt fit. This fits a M3 nut perfectly. Its not super pretty, but no one will notice… Its a adapter for the heater Print in PETG(!) I used 0.15 mm…
Just a simple radiator cap (TRV) - 30mm/1.5mm thread
The replacement is designed so that it can be mounted without further destruction of the TRV and still provides access to the batteries. I printed mine in PETG, ABS would be better of course but the temps on the TRV should never be so…
This is a replacement cap / front piece / bracket for a broken eQ-3 Homematic IP Evo (HmIP-eTRV-E) Thermostat. The front cap has broken off on two of my thermostats, which happens quite easily by accidentally bumping into the thermostat,…
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
De Stridsvagn 103, ook wel Strv 103 is een Zweedse main battle tank en een uniek voertuig. De tank heeft een schuin voorpantser, dat lastig te doorboren is. Ook bevat de tank een 105 mm kanon met autolader, waardoor de herlaadsnelheid…
Sonoff doesn't inlcude an adapter for this valve, so I made one. It's just an M28x1,5 to M30x1,5 adapter that is the correct length for the Oras Stabila valve (not the pro model). I printed this with a MK3S, 0,6mm nozzle, 0,15mm detail…
This is a prototype and i haven't had time yet to test it over a long period, since i just installed mine. If you want to help refining the design i would love to hear if any issues appeared while using this housing. Since printing new…
My brother plays warthunder a lot and needed a gift for his friend so i made the cheese wedge stridsvagen/strv 103 in tinkercad and printed it in yellow and blue PLA. The one in the picture is scaled to 200% and is 26.8cm long, 100%…
An impact on my TRV broke one of the internal battery cover clips which meant it would no longer stay in place. I design this as a stop gap solution until I can replace it. Simply slide it over the top and ensure that the clips engage…
I use Bosch radiator thermostats, last year or so, the valve broke off from the radiator, it broke at the mount, a number of the holding clips broke, I suspect this was a gradual issue over time (maybe it was over tighted when originally…
I was getting the f5 error with just the adapter so I've made this extension so the TRVZB can move the valve of the radiator and initialised.
Hide stuff inside or resize and make it your own. Be it a prop or a personalized gift for your partners.
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
It's the adaptor from pemlik, I just needed to add a 1.5mm rim to be able to make the Silvercrest TRV not loose on it. If you want to modify it, you need the original model to import in the OpenSCAD.
TC3EC 433MHz Moxon Antenna Splitted By TA3TRV For 220x220mm Printer Beds Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro **Rafts:** Doesn't Matter Supports: No **Resolution:** .16 Infill: %20 **Filament:** Porima ASA Beyaz…
One of the lugs holding the battery compartment cover broke off so I flattened the broken surface, drilled a couple tiny holes for alignment and better adhesion, printed the missing part, and attached it with superglue. I'm including both…
Repair kit for thermostatic valve Moes BRT-100-TRV. The repair kit can be used when the locking pins in the body of the TRV are broken. The part utilizes the conical shape of the TRV body and at the same time strengthens the attachment of…
Remix of the model from powerscripter, nice model but need to be printed in PETG. My Remix can be printed in ABS
I broke the original piece and as I need an adapter anyway I decide to combine directly in one print
I made this because every time i bumped into the Sonoff TRV Radiator valve i would knock it off its socket. This print makes the walls of the socket more sturdy. Printed in PETG
I have black radiators and dark walls, so the standard white cover didn't match my decor. You can print this cover in any color you like. Matte PLA works well for me.
The drayton wiser radiator thermostat only supports modern 30mm x 1.5mm pitch TRV heads. This is an adaptor for older 28mm, 1mm pitch valves. An earlier version using the provided metal fixing ring broke after 3 months of use so this…
Here is my take on converting the 3x AA batteries into a dual 1S2P 18650 rechargeable battery for my TRV 604/TRV602 My TRV604 are mounted on Danfoss RA valves. I used around 60 AA batteries in 6 months with these thermostatic valves. I…
Because the adaptor screws down very tightly, I added a knurled texture to make it easier to grip should it need removing later.
None of the adapters supplied with the Sonoff TRVZB zigbee radiator controller fitted one of my radiators. The old TRV was held on by a metal circlip which this modle re-uses. You'll need one of the little push-rods supplied with the…
Materiál: PLA Vrstva: 0,25mm Perimeter: 2 Výplň: mriežka, 15% Otvor pre špajdlu: priemer: 2,75 mm 1 x drevená špajdla Vytvorené v programe FreeCAD.
Simple wrench for assembling Sonoff TRVZB thermostatic head onto your heat radiator. Its recommended to use tough material such as PET or ASA, even do not save on wall thickness and infill. Wrench should be solid and robust.
The TRV604 wifi valves run natively on 3 AA cells, which in the case of NiMh rechargeable cells provide ca 7 Wh (3-4.5V). This energy allows the TRV604 to run between 1-6 months, depending on temperature changes, heat source temperature…
Bambu studio print instructions Print with supports on bed only and uncheck remove small overhangs As this part is designed to be installed on a radiator, use ABS / ASA or other high temperature filament.
Cover to protect MF-BTRV-35 (Mornings Made Magical) Frother. https://amzn.to/4bUwGEn I ran this standing up on a Bambu P1s using PLA without support.
Since my radiator valves have 30×1.0 threads, I explored 3D printing adapters rather than purchasing commercial ones. After testing various designs with my Tuya TS0601 TRV, I encountered several issues—incorrect pin lengths and constant…
Studenti vymodelují, propočítají a vytisknou učební pomůcku pro výuku fyziky.
WHAT IT IS A tiny press-fit cap that slides onto the control pin of an old Danfoss RTD-N radiator valve and makes it 2.5 mm longer. Nothing more, but it is the missing piece if you want to put a modern M30x1.5 smart head (Sonoff TRVZB in…
I was replacing my manual dial with a smart thermostat and realised I didn't have the right tool to unscrew it. IMPORTANT NOTE: This is a plastic spanner! It will buckle under excessive force, which is actually ideal as you shouldn't…
In 2022 Aqara introduced their thermostat radiator valves, although they have a nice design the front button sometimes tend to be pressed by mistake when rotating the knob or just by inserting the cover, this might cause the valve to act…
This is a plugin part for one of the original radiator valve adapters included with the Sonoff TRV. It enables to mount the original adapter to the radiator valve, while stabilizing the second-largest pin enough, so the valve can be…
This is a replacement case for a Siterwell TRV drawn in Freecad. I have tried to print a first version that came out rather well. Two out of the three TRVs ended up breaking in the same place: the plastic connector underneath the ring…
Nastaveno pro tisk ASA / Set up for ASA printing
HomematicIP HmIP-eTRV-2 Head
Your Thermostat-Enclosure broke? Most chinese thermostats look the same. If you can only replace the baseplate, checkout the remixed model. If it is build out ouf one single piece, you can try to print this model. You have to tear down…
fixture plate to customize to make your own compact adapters
trvgen2-fixture-plate-m28-1.5 17mm shorter than the official fixture plate with a M28x1.5 adapter. trvgen2-fixture-plate-right-angle-m28-1.5 Print in two parts (fixture + pusher block). Add more walls and higher infill on the pusher block…
This is a replacement case for a Siterwell TRV drawn in Freecad. I have tried to print a first version that came out rather well. Two out of the three TRVs ended up breaking in the same place: the plastic connector underneath the ring…
None of the adapters supplied with the Sonoff TRVZB zigbee radiator controller fitted one of my radiators. The old TRV was held on by a metal circlip which this modle re-uses. You'll need one of the little push-rods supplied with the…
Spare part for Shelly TRV. This part can be used in place of the original part, which can break if there is a collision with the TRV.
Here is my take on converting the 3x AA batteries into a dual 1S2P 18650 rechargeable battery for my TRV 604/TRV602 My TRV604 are mounted on Danfoss RA valves. I used around 60 AA batteries in 6 months with these thermostatic valves. I…