1,242 models
This tool set helps you get a perfect finish on your silicone caulking. You'll find the following: straight profiles for corners (5, 7, 8, 10, 12, 14, 16 mm) rounded profiles for taps, fittings, or recessed joints (5 and 15mm) a tool to…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
These holders har small and thin on purpose so they are cheap to produce in large quantities. If you need a big and very solid product - this is NOT it. But the will hold up to normale use just fine. Hope you like it.
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
This is a 3D printed part similar to commercially available caulk tube sealers . Have you ever used caulking or some other sealant gun / cartridge gun tube material, but didn't need the whole tube? This part will screw into the open end…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
This is a bulkhead fitting for connecting flexible hoses to containers. It is designed to allow for easy drainage, since the existing parts I found available didn't allow for good drainage due to surface tension around the inlet. You…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
Made to be attached to a desk/table/shelf between 2.5 and 2 cm thick. I printed it in 0.20 but I guess it is possible to print it in 0.30 and still make the screw work.
Print approx. €3.18–€3.88 excl. taxPreliminary estimate for one variant
Adapter na 3/4" hadici, šroubovací průchodka M36 Vrtám díru 40mm, tloušťka stěny nádrže je cca 3mm. Doplnit ploché těsnění s vnější strany , závit netěsní na 100%. Z vnitřní strany není nutné těsnit. Hadici před nasazením nahřát, aby…
Print approx. €8.14–€9.95 excl. taxPreliminary estimate for PETGSource material: PET
CZ : Kamarád mě požádal o nakreslení a vytisknutí jednoduchého krmítka pro andulky podle vzoru které používal 8 let. EN: My friend asked me to draw and print a simple bird feeder for budgies based on the model he had been using for 8…
Print approx. €5.91–€7.23 excl. taxPreliminary estimate for PETGSource material: PET
This is an updated version of the following thing: https://www.thingiverse.com/thing:1478706 which held roughly 6-7 cards. I often found myself and my coworker running out of cards during large events. The improved version highlights…
Print approx. €2.72–€3.33 excl. taxPreliminary estimate for one variant
Bulkhead inlet mount for 2 SO-239 Connectors with the flanges. making this for a friend who was putting his HF radio into one of those black plastic Harbor Freight Tools brand protective carry suitcase.…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
The weak point of the Team Losi Racing 22x4 4WD buggy has always seemed to be the front gearbox/bulkhead, often breaking to leave the shock towers ‘floating’ above, and the repair is not quick during a race event. These simple braces act…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
3mm bila, zbytek modra
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Výstražná cedule "pozor vysoké napětí".
Print approx. €2.73–€3.33 excl. taxPreliminary estimate for one variant
tabulku s nápisem doporučuji tisknout v PETG pro venkovní použití, vrchní vrstva je bílá 1,5 mm potom černá PETG pro viditelnost . Zkontrolovat čistotu bílého vlákna, možnost přenesení zbytku barvy z předešlého tisku .
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Nastal čas ukázat šéfům že laminovačka a papír jsou už out
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant
Žáci navrhnou a vytvoří informační tabulky na označení tříd podle vlastních představ, které následně vymodelují a po vytištění umístí na dveře
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Prostě cedulka... Just a tag...
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…
A compact tool designed to clean caulk and silicone cartridge nozzles after use. The spiral tip helps remove leftover material inside the nozzle, preventing silicone or sealant from hardening and allowing repeated reuse. Simple,…
Original link : https://www.thingiverse.com/thing:993933/files by 3DWP I've painted the model for the Bambu Lab printer.
You can find this model on Thingiverse. I added a 2 part version. That will save you support material. Scale it, print it, glue it together and paint it. Printer Settings Printer: MK3S Resolution: 0,15 Infill: 5% Supports: Yes Material:…
This tool features interchangeable head pieces , allowing you to choose the finish that best suits your project. Two head styles: Chamfer – creates a clean, angled finish Round – produces a smooth, curved joint Each style comes in three…
Original by Rnagp - https://www.thingiverse.com/thing:4862154 Waited for this to show up here long enough. Here it is! Supports on bed plate only. I used a .4mm nozzle, 2 walls and 15% infill. Turned out perfect! Pics of them on chickens…
Used to pull set / hardened caulk from a used nozzle. Simply remove the nozzle from the tube, wind the unblocker tool in and pull out the old caulk. Used to restart a tube with nozzle that hasn't been used in some time. Printed with 0.2mm…
This is a Shulker Box from Minecraft , albeit only 75mm cubed rather than 1m cubed =) The dimensions are accurate and the pitch of the thread rises the box accurately too: 50% of the height of the box per revolution, just like in…
Caulking Gun Nozzle Unblocker - without support
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint
Not much to say about this one, really. It's hulk, and he doesn't require any supports on FDM :) Note: “cc” in the filename means concave eyes, with the iris sculpted, and “cv” means convex, with smooth eyes. Also, “hd” in the filename…
🇲🇽 Welcome to Yucatán, Mexico! Ancient Ruins , a dedicated sub-collection by MiniWorld3D about past civilizations, presents: Mesoamerica. This model was created by Artemio García . This is available in two versions: Actual state (ruins)…
Support-Free Remix of Hulk Action Figure . This is a support-free FDM friendly remix of the model by 3DWP available here . No supports are required anywhere and it can be printed very easily. Check out the 3D print timelapse to see it in…
Traditionally, I and my father before me would use a nail to plug the end of a caulk tube. It worked, but you'd have to deal with rust from the nail and you'd need different sized nails for different holes. I looked for covers at the home…
Subscribe Now! Time-lapse print video https://youtu.be/0L3If6I31YU Other Hulk poses: Remix to support free and printed. Planet_Hulk_Bust_SupportFree_icz.stl (Infill required) Planet_Hulk_Bust_V2_SupportFree_icz.stl (Fixed strap on his…
Maturity Good 2 prototypes. In use since 2023/10. Differences to the original I made the handle thicker to be the size of the helix. Then there is no need of support for the handle. I added some select infill for a stronger part. The…
Tool for creating nice corners of silicone (e.g. in the bathroom). One object has a 3, 4, 5 and 6mm radius and the other a 7, 8, 9 and 10mm radius. Enough choice for every job!
This tool is used to smooth caulking - the silicon stuff that is used in kitchens and bathrooms to seal between benches and tiles. I printed this in PLA but it's a bit too stiff. I printed in TPU and it's perfect! The small corner is 10mm…
This set of tools were made inspired in commercially available tools for working with caulking. Print with flat surfaces down Update: larger inner diameter so that tip goes further ahead closer to the end. Print Settings Printer Brand:…
All the Allen key storage model are one of each size, but I have too many sets with missing pieces accumulated over the years. First time 3D modelling and sharing, attached STP file which is supported in Bambu Studio and allow easy…
Useful tools for smoothing sealing lines and caulking lines, which helps save sealant without masking tape when you apply it for sealing work. They are suitable for most types of sealant such as DIY crafts or floor silicone sealant,…
Here are some 22LR storage boxes and trays. These are designed to be able to arrange large amounts of bulk 22LR ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that three boxes and 15 trays can be stored in…
I remixed these for my nephew, who is a marvel fan but just 4 years old. The original hands are way to big for him so I made them 75% size of the original (opening of the wrist is 75mm) and added a handle bar inside the glove so he can…
No brim or supports required. Threaded nozzle tips designed for silicone, caulk, sealant, adhesive, and similar standard cartridges. The set includes multiple nozzle variants: Flat tip 45° angled tip The threaded base allows the tips to…
Organizer that holds four tubes of standard 48mm OD Caulk/Sealant. Two versions are provided: One that sits on the edge of a shelf, and the other hangs on a wall. Both can be mounted using two #8 screws. Print fits on a standard MK3/MK4…
Simple caulk spatula designed for edging. I've included versions in 6, 8, 10, and 12 mm sizes, both in the rounded and 45-degree designs. Created in Fusion 360. The round grip in the middle aids in holding it. I printed it with a 0.12 mm…
Caulking Gun Nozzle Unblocker / Nettoyeur canule cartouche silicone
A quick a simple storage box for you bulk Pokemon cards. You should be able to fit around 500 cards in this container. Once filled, they wont shake around or move about.
This uses two mechanical keyboard switches to make a moving shulker fidget toy. The box in the picture is fully open, and upon pressing the top, it closes fully and bounces back. Very fun to play with and a fun desk ornament or fidget…
Give me a Like 💗 Follow Me 😁🤗 Caulk Tube If you have other ideas, feel free to change it, I Uploaded the Fusion 360 file. As an Amazon Associate, I earn from qualifying purchases. Category: Tools
Regular size caulking nozzle (10cm) Remixed from an original design by Lannix 3D https://www.printables.com/model/150759-extended-caulking-nozzle
I have tried to make my own version of hulk parts. My work is in progress so if you have feedback is welcomed. Some parts are missing and not been upgraded yet. 28/11/2023 - Added left and right fist 29/06/2024 - Added new head ,and left…
There's a few of these I've seen on here, all of them seemed to not fit or grip well. It took a few experiments, but this one seems to work well for me. Its fit snugly, and held, on all the 10oz caulk tubes I've tried it on. You'll need…
This model is compatible with the lego system.
This is hulk's fist goes from broken wall lamp. there has to be zero infill for the fist and 3-5 perimeters. It depends on the color of the pet-G filament. my print is from Prusament PETG Neon Green Transparent,…
The Hulk, as simple as it is. First Layer height 0.24mm Layer height 0.2mm Have fun with it.
I looked into the type of thread that was used for these types of tubes. Everything pointed to a S15x2.5 specification; which is a type of metric buttress thread profile. Seems to fit everything with the same tolerancing that store bought…
Designed to store 10 sizes of drills in bulk quantities, lengths were tuned for the Screwfix Erbauer 1-6mm trade pack of drills size. That pack includes the following size drills: Drill Diameter (mm) Drill length (mm) Compartment length*…
Simple shulker box i made to store my fidgets in. I liked mkoistinen shulker box and wanted to have something that can hold more things inside so i made this. It may not screw open but still looks like a shulker box. I printed mine scaled…
The "Hulk Christmas Ornament" combines the spirit of the holidays with a touch of superhero power, bringing a playful contrast between Hulk’s serious expression and the cheerful red Santa hat perched on his head. Made from durable…
Changes I made the bigger on longer and changed the inner radius on both. The large holder has the sizes 6, 8 and 10 The smaller one has the sizes 1, 1.5, 2, 2.5, 3, 4 and 5 Pringing Nothing special, except, maybe make a color change…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Added stem to help keep tip of tube clear upon cap removal
This model is compatible with the lego system.
Marvel Hulk Keycap for all Keyboards with + connector Infill: 15% Pla/ PETG No Supports Mehr Designs von mir auf Makerworld !
Silicone caulking nozzle, ribbed for your pleasure, makes (un)screwing fun!
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Go support La Calavera on Patreon La Calavera 3DPrint | creando 3D models to print | Patreon
I put the Head of Hulk on a Base ! Printer : Artillery Sidewinder X2 layer height : 0,1 line width : 0,4 Scale 75 % Lightning infill 8% ; print time ~ 23 h Sunlu Silk Silver PLA MakerWorld : https://makerworld.com/en/@sweb3791 Spiderman :…
Warning - I'm hearing reports that Gaggia has recently changed the pump area screw locations, so if you have a 2026 or later E24 the holes may not match up. 2024-07-02 - New Alpha rev, note that instructions are not complete: Same base…
Extended Caulking Nozzle for getting to those hard to reach places!
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Installation video: Great Scultpure! Very durable with PETG!! Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 0.1 Infill: 35 Filament: Warhorse PETG Notes: Supports only touching the…
I saw these incredible (pun intended) 3D scans of parts of a Hulk figurine. I just had to combine them into one model and sculpt it to hide the seams! Thanks to Sixfeet who scanned this awesome model. I used VisCAM to edit and combine the…
ATTENTION: PRINT THIS TEMPLATE UPSIDE DOWN FOR BETTER RESULTS MY PRINT SETTING: -Nozzle 0,40mm -Layer 0,08mm -Infill 5% -Support auto tree
The model is 2mm thick. I printed at 0.20mm layer height with a single wall. In PLA+ this is fairly stiff with just enough flex for my needs.
This is the bulkhead fitting needed to install a valve in the wall of a rain barrel. While commercial fittings are available, they can be expensive. The ID of the fitting is sized for a ½" pipe thread valve (very common in the US). The OD…
This is a simple screw cap to close you caulking gun cartridges. The shape is made so you can use an 19mm wrench to screw/unscrew the cap. Print Settings Printer: P3Steel Rafts: No Supports: No Resolution: 0.2mm Infill: 35% Filament: BQ…
Wider chest, bigger biceps, shoulders and hips to match this model DUMMY 13 HULK remix by Sot Kon | Download free STL model | Printables.com
Here is my solution for a silicone caulking tool. I'm rather satisfied with the results in my kitchen, so feel free to try ! Several chamfer sizes are available (I used 6mm). I believe that this shape design makes it easier to succeed in…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Design Concept The bust captures the iconic and recognizable appearance of a famous wrestling personality, designed with detailed musculature and clothing accessories like a bandana and chain, reflecting his stature and style. Purpose…
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Please post you prints Filaments Used: PLA PolyTerra Charcoal Black PLA+ Esun…
When I thought of the Incredible Hulk, the first thing that came to mind was HULK SMASH! Smashing his fists down really captures the look I was going for but try not to smash your cup down on the coaster! Part of my Marvel's Avengers…
I wasn't happy with the other caulk caps available so I made a new one. It prints tip-side down so the pin remains stable during the print. I suggest printing with Perimeters set very large (like 20) so the entire volume is printed as…
Note: I wanted to create some modern-ish shoulder armor for cosplay and started with some Helldivers armor as base. As i progressed with prototyping i felt like it wasnt quite to my liking in how it looks, but still wanted to publish it…
I had quite a assortment of spare drills 1-10 I had all in separate boxes per size. As I do some metalworking in stainless steel sometimes drills tend to be braking and it nice to have them fast when I brake one from my main set to…
Hulk Marvel - wall art, easy to print
This makes for a way simpler setup for printing and if for some reason(like layer orientation), you still want to print on its side, you can. (Cover photo provided by @Notorial's make)
HULK Mutiprint. Parts to be printed separately and then assembled. use supports if needed and enjoy this awesome model
Wow what a cool .PDO found over at http://www.pepakura.eu/all/iron-man-hulkbuster-full-armor-foam/ or here at http://overdosegamer.blogspot.co.nz/2015/05/hulkbuster-mark-44.html I've added in another chest and helmet but have included all…
1) remove the old silicone 2) clean with, for example, isopropyl alcohol 3) apply silicone and wipe with an 8 mm squeegee in the direction of the slant (so that the silicone gets everywhere without air bubbles) 4) tear off the silicone…
This time it's a boxing Hulk. Print instruction same as on the other Model. Still improving my rendering skills, hope you like the model. Tell me if you want some changes or other poses.
The ready-make fix for your automatic Milwaukee Caulk Gun that just broke its nozzle because it fell on the floor… Print with ABS, PETG or similar material at 100% infill with 3-6 perimeters and auto supports enabled and generated. If the…
This is a cable clip attachment to the standard iPhone USB-C charger I've been using the original Cable Organizer Clip by user "magicxman" on Thingiverse (https://www.thingiverse.com/thing:46600), for many years now. Just recently, I have…
![Bulky Shoulder Armor + Clip for Attachments [Unpolished]](https://media.printables.com/media/prints/894836/images/6928491_7c419462-5c7c-43cf-91ee-5a081637d2c3_3d6ae363-f47c-4261-a85d-413b03bba5c4/armorcutup.png)
