Ender 3 Direct Drive Filament Unload/Load Entladen/Laden Gcodes
Gcodes für Ender 3 mit Direct Drive.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
- Downloads
- 25
- Likes
- 2
- Rating
- 0
Counting matching models…
Gcodes für Ender 3 mit Direct Drive.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Magazine loader/unloader I designed for use specifically with 300BLK and a P-Mag but should work for all 5.56 Mags. Prints in 3 pieces. Body, Lever, Pivot. Body only needs a small amount of support for the gap caused by the mag release…
Place over loaded magazine with round nub pressing on the tip of the bullets and press in. Unloads under one second.
Very fast and simple unloader for AR15 magazines It works best with the Magpul M3, it doesn't work perfectly with the M2, but it still helps. I printed from PETG at a 0.1 layer full of perimeters.
Replacement Lid for the Odin Speedloader for easy unloading of mags. BB stopper is only necessary to stop bbs from comiing out while transporting the speedloader in a bag Lid might need some sanding at the edges to move freely I printed…
Easy unloading tool for airsoft shotgun shells, M4 mags, MP5 ect! . Screw it on a bottle and push the shell or mag onto the top. Use any filament you wish. NO SUPPORT is needed! Support my work - By buying me a cup of Coffee☕ If you wish…
A very fast unloader for AEG Airsoft magazines so you don't have to fiddle with the small BB catch when you're exhausted after a long session and ruin your thumbs. It is designed to fit onto a standard ASG Airsoft BB Bottle and is…
E3D Revo Auto Retract + Extended Start Purge: Do you hate having to heat up, remove filament, cooldown and reload filament into your Revo Hotend when you want to swap nozzles? This is the ULTIMATE solution for you! WARNING: Preform this…
This is a simplified CZ Scorpion mag loader & unloader. I've only tested it with the Magpul PMAG 35 round mags. The nub on the back is to be used as an unloader. Printed in PETG; no supports need with the angled face down as shown in the…
My first foray into scale modelling: a 1:300 scale model of the W. W. Holloway, a self-unloading Great Lakes freighter that featured in the bridge jump scene in Blues Brothers. As far as I know, this is the first and only published model…
simple unloader for midcaps. this one fits over the top of a coke bottle thread and sits on top of the top thread for those with BB pouches. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 30 Filament: Eono PLA black…
Replacement Lid for the Cheap Winding Speedloader for easy unloading of mags. BB stopper is only necessary to stop bbs from comiing out while transporting the speedloader in a bag Lid might need some sanding at the edges to move freely I…
FOR Non AMS Users Upload to SD Card to always have the Filament Buttons of your Choice SAVE NOZZLE gcode keeps the nozzle in place and takes it to 290 for a bit to get the gunk out but has no retract in the code or extrude These Buttons…
This is a replacement sign post and sign board for the Crate Unloading platform tor Tyco US-1/ Tyco Trucking. For the sign post, I include both a version with a strategically placed brim and one without. The brim is 0.2mm thick and can be…
This parts can be used to utilize the existing left extruder bracket (z-bracket) and keep the setup of the filament runout sensor. It will also come with a filament guide and unload filament protection (since if you will mount the tube…
These dice were designed as part of the Brain Box project at Cardiff University - see www.BrainyCardiff.com for more information. The loaded and unloaded dice weigh the same, making it difficult to determine which one has the loading. The…
PTW unloader, fits on common PET plastic bottles. Tested with Magpul PTS Mags. no supports needed
3D printable "Prepare to Unload" sign as seen on chair lifts for skiing. Perfect sign for outside of your bathroom... ;) Print instructions 0.2mm layer height, color change at 2mm
This is a replacement structure for the Tyco Trucking US-1 "Car Unloader Action Accessory." The design is a little different from the originally, specifically in that it has a sign above the track where the truck enters. I added this to…
Are You tying to empty your airsof mag but you can't, try this
The new E3D Revo system is a game changer in many ways. However, one of the best features of the system, the ability to change nozzles while the printer is off/cold, has a big flaw. After the printer has completed a print, the filament is…
This sign can be used on you model skilift as an accessoiry to make it al look nicer! happy printing, make sure to post a make when you print my model, it would make my day. If you have any ideas on how to make the letters pop more, leave…
This is a replacement backstop for the Tyco Trucking US1 Auto Unloader Print instructions Category: Toy & Game Accessories Summary This is a replacement backstop for the Tyco Trucking US1 Auto Unloader
This is a remix/combo + cleanup of exellent MOD by SpartanDog3D and JASII adapter for CopperHead hotend. It uses 4mm OD and 3MM ID PTFE tube to feed filament from MMU to the extruder and it solved most of my issues (still better tune the…
This is a remix of https://www.printables.com/de/model/400219-aep-magazine-emptying-adapter by https://www.printables.com/de/@mladendeni_568524 . What has been changed? I added a lettering to the original Cyma CM.127 adapter. I created /…
While cleaning up, I found an unloader for tipping wagons that Minitrix ones used to sell. Not that these cars have anything to do with real-life models (at least in this scale), but their action always makes them a great fun for…
Unload & a raise bed/toolhead button in the style of TheKwijibo's buttons.
Housing for the DL24M unloader, available on Ali or Bang. https://pl.aliexpress.com/item/1005003426244725.html?gatewayAdapt=glo2pol Base made of 16mm laminated board. For the 2-module version 300W.
Airsoft magazine unloader assembly in a thunder b shell to save the bbs.
GOAL Z KiK Speed Unloader The GOAL Z is high-security lock from Japan that is popular in locksport. When in a Key-in-knob (KiK) format, the GOAL Z is easy to repin without having to pull the plug and deal with core centering bearings.…
ASSA 700 Grubbed Oval Speed Unloader The ASSA 700 is a high-security lock from Sweden that is popular in locksport. This lock comes in a Scandinavian oval format with chamber plugs that can be removed and grub screws inserted, allowing…
Unloader your airsoft Mag from your loaded BBs
GOAL P KiK Speed Unloader The GOAL P is high-security lock from Japan that is popular in locksport. When in a Key-in-knob (KiK) format, the GOAL P is easy to repin without having to pull the plug and deal with core centering bearings.…
A saw how my team mate painfully unload BB from shell-magazine of his shotgun. Now it's much easy, just insert shell into unloader, little press on shell and BB fall down to bag/bottle
With this tool you can unload the BBs from your 6 mm AEG airsoft magazine. Supports needed.
I noticed while testing an mmu that while it was not mounted it made way less noise. So…. I designed an rubber dampened mmu3 mount. Buy 4 M3 damper rubber. One side with at least 8mm thread (mmu side) and the other m3 screw hole.…
Unloading tool for S200/CZ 200/Altaros SA Assassin magazines. While it's unlikely you will ever have to try it, but when you have to do it, it is annoying and time consuming to extract pellets individually from a tiny magazine, and most…
hope you all like this model i couldnt find one to print so i did it myself and it works great i need some feedback tho
Simple design Helps guide the filament away from electronics.Need to replace the screw with a m3x25mm one to attach it. Category: 3D Printer Accessories
A simple tool to unload your airsoft magazine back in the bottle
Simple Simon’s Cat themed dishwasher tag designed for round IKEA handles. Category: Kitchen & Dining
Remix of Lalo_Solo over on Thingiverse. This is a small desk caddy for everything I unload from my pockets everyday - Ridge wallet, Leatherman, Keys, keyfob. It has additional space for USB sticks and misc storage in the front (as I did…
This stand was the solution for having a loose Fender Frontman amp laying around. Rather than play it upside down, I made these stands to display it properly. There are a few designs to choose from, enjoy! Note: The stands will display…
A speed loader/unloader for assa mortise locks. I designed and used it on a twin 6000, but it should fit other mortise cylinders as well. Recommended print settings: .4mm nozzle Orient with open side of pin stacks up
Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No. Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: purple Filament material: ABS+ Slicer: Ultimaker Cura 5.4.0 Printing temperature: 250 Celsium Build…
It's simple mag unloader for BB Bottle that let you… unload mags straight into bottle
Recommended print settings: .4mm nozzle Orient with open side of pin stacks up
A working, hand-cranked PORTAL GRAB SHIP UNLOADER for bulk cargo in N 1:160: a portal on rails with a slewing ring-gear, a luffing boom raised by a toothed sector and key crank, and a grab with two gear-coupled jaws. Free sample = the N…
Free 1:350 sample of our generic rail-mounted bulk grab unloader (bridge type): a portal on two quay rails with a trolley that you push by hand along the girders and a clamshell grab that opens and closes when you turn a hand crank…
Original, AI-assisted design by Isaiah Dupree. Two unloaded fit gauges for a modular dumbbell carrier project. This release contains coupons only. The full rack is an unmeasured, unqualified CAD study. No load or lifting capacity is…
3DQF MK20 Spool AMS Adapter Rings Our new printable AMS adapter rings have been designed for the 3DQF MK20 cardboard spool , allowing correct operation within both the Bambu Lab AMS 1 and AMS 2 systems. No supports are required when…
It's simple mag unloader for BB Bottle that let you… unload mags straight into bottle
Replacement Lid for the Odin Speedloader for easy unloading of mags. BB stopper is only necessary to stop bbs from comiing out while transporting the speedloader in a bag Lid might need some sanding at the edges to move freely I printed…
Simple Simon’s Cat themed dishwasher tag designed for round IKEA handles. Category: Kitchen & Dining
Unload & a raise bed/toolhead button in the style of TheKwijibo's buttons.
Preserve the longevity of your mid-cap magazines using this little tool. Easily unload back into any BB containers. Odin compatible! Print settings & Material Recommendations: PETG Inside Brim