Chill Guy
Chill Guy
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
- Downloads
- 11,124
- Likes
- 1,731
- Rating
- 4.93
1,413 models
Chill Guy
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
I've long been a big fan of the Keycappie by Romly, a great little figure that can house a an MX compatible mechanical keyboard switch right in his head. They're so cute that I couldn't resist the temptation to make one of my own. I'm not…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Need guy rings for your portable antenna mast ? Look no further. But why 5 holes? 5 hole guy rings offer easy attachment for 3, 4, or 5 guy lines, making them more universal and easier to use in a variety of setups. Rings are sized by the…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
stumble guys - logo + head keychain PLA
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
stumble guys - change color logo keychain
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Hello, Banana Bonanza from Stumble Guys. Thanks for your download, enjoy the print!
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
These are 34mm and 22mm guy collars for the incredible 10 meter Sotabeam Travel Mast. I made this eye balling the ones available on the Sotabeam website. They should work on other masts as well. These collars will slide over one of the…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
A guy rope plate to go on the 3rd section of the DX Commander SOTA pole . This fits over the top of the pole when you are extending it and when you raise the 3rd from the bottom section it will sit snuggly on the pole. The inside edge is…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Stumble Guys Santa - Cookie Cutter
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
🇯🇵 東京へようこそ! Welcome to Tokyo! This model was originally created by Dany Sánchez . Shibuya Scramble Crossing (渋谷スクランブル交差点, Shibuya sukuranburu kōsaten ) is located near Shibuya Station, in a major commercial and entertainment district in…
Print approx. €4.34–€5.30 excl. taxPreliminary estimate for one variant
A cleat I made to wrap the lines for my tarp, to make it fast to deploy and pack. It doubles as a tension device. To use it to tension the rope just pull the line through the big hole and around the ear, like pictured. Use the same method…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
I needed something to make connections to the pads while I tried to flash a KMC Smart Tap Mini with OpenBK. It uses a Tuya CB2S module that's edge-mounted through the main circuit board. This jig can be held/clamped against the bit that…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
In my smarthome I use Tuya zigbee 4 Gang switches, that were mounted above the normal Busch Jaeger switch, but the switches look different and you don't use the original switch anymore, so it's a bit obsolete, but wanted to keep it, in…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for PETGSource material: PET
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Tired of having to change the puny coin cell battery so much? Well go big or go home! With this case and a tiny bit of soldering you can now wait much, much longer to swap batteries! Takes just over an hour to print. No supports. I just…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Le climatiseur BA212C de Beko possède un adaptateur en sortie d'appareil sur lequel il faut brancher un tuyau d'évacuation. Pour pouvoir utiliser un autre tuyau de taille 125mm, il faut utiliser un adaptateur. Les 2 adaptateurs doivent…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
A Buddha with the head of Chill Guy. I didn't find the original Buddha but the idea is understandable.
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Hello, Today I have 3 boys for you. They are suitable for coloring and the next game. Easy printing. My kids love coloring these characters :-). I used PLA/PETG as the material. No need to use supports!!! If you are interested in my work,…
Print approx. €11.37–€13.90 excl. taxPreliminary estimate for one variant
The size of the pocket is adapted to the NEW MHUB-W-Q version of the Tuya gate. It has a circle-shaped ON/OFF button in the lower part. The microUSB connector is also easily accessible.
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
K použití kamkoliv , auto a td.
Print approx. €4.86–€5.94 excl. taxPreliminary estimate for one variant
C'est un outil pour racler et déboucher un tuyau d'évacuation d'eau de diamètre 40mm. La tige fait 24 centimètres de long avec un bout en demi cercle, permettant d'accéder dans le tuyau et de ramener les saletés et de ne pas les pousser.
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
Little Gree Army : Princess Bride : The Bad Guys : Humperdinck, The Albino, Six Fingers.
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
You can add supports on pumpkin base for a better print Use glue to attach all pieces. I printed the pumpkin base with a 0.8mm nozzle 0.2mm layer height Face and Eyes printed with 0.4mm nozzle 0.16mm layer height Scale it as you like :)
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Something quick, because of course I had to make an entry for the jointed figures competition! This snap-fit model starts as a one-inch cube and flips inside out to reveal a cute, spiderlike robot. Instructions The 3MF file has all the…
guy gardner green lantern ring from the 2025 superman movie
A version of the Doom Guy collectible from Doom 2016. At the time, the figure that appeared in the game wasn't available in real life, and I wasn't about to settle for a Funko Pop so I made this.
Plant pot perfect for small plants, succulents and cacti. He's just a little smiley guy! Two-piece design with planter and drip dray. Has a drainage hole to ensure healthy plant roots.
Mr. Stumble - Stumble Guys in low poly!
My son wanted to be a Shy Guy for Halloween this year, so I whipped up this mask for him. The lenses can be quite delicate so take care while removing the support material. I had good results using organic supports with the lenses rotated…
Hi Sofedar, I found this awesome model here skuplted by D3v1lman (check out his skills wow : ) https://www.youtube.com/watch?v=jLZbLyr2psA and thought it would be perfect for your project, The whole at the bottom is only 16cms wide so you…
Mask from V for Vendetta movie. Reupload of the https://www.thingiverse.com/thing:23457
A quick remix because my kiddo wanted more legs and more claws!
A simple cord tensioner hook to be used for guylines, ridgelines or lines of any sort when camping or during other cordage-intensive activities. I use (and recommend) it in combination with my BEEFY TRI-LOBE TENT STAKE CAP for a killer…
Welcome to the Fridge guy Dummy13 magnet addon pack. Thought how cool would it be to have these guys hanging of our fridge and printer shelves defying gravity . Each part uses up to 4 magnets but you can add as little as you want. 2 sets…
I had an old print of a similar doorstop. When mine went missing, I searched the internet for the original design file. Not finding it, I recreated the doorstop from memory. Turns out the original was still hidden deep on Thingiverse.…
Built entirely in blender. A funny looking clay figurine. Printed with PLA, 0.2 layer height. Supports needed.
This remix adds a couple details to the original by 'Tralmix'. The included .3mf file should include color changes at 1.2, 2.2, 3.2 and 4.2 millimeters for a multi-colored final product. YMMV on color change height depending on your layer…
Simple tensioner for a tent guyline or paracord. I have tested the uploaded 3MF/STL files with 550 paracord (~4 mm diameter) as well as narrow tent guyline (~2 mm diameter) and it holds well. Should you need a different size, the source…
double garden hose connection - raccord double tuyau d'arrosage type gardena Paramètres d'impression 3D, printing setting petg - layer 0.15 - bed 85°C - nozzle 240°C
Inspired by ButtPals, here my personal Family Guy - Peter Griffin version. Start with white color, then after 3mm insert a pause and change to black EDIT: added color stls Hope you enjoy it! HOW PRINT IN MULTICOLOR WITHOUT MMU: Printer…
Youtooz released a model of the Purple Guy Sprite from FNAF a while ago, and I kinda wanted to try to recreate it. So I recreated it, and it looks pretty good. The eyes are off, but I think its ok. Please don't sell this, as it basically…
The matsuyama paradox is a riddle in which the small square has to be added to the other parts. Obviously impossible but it works. If you like check out my other designs too!
Had some trouble with the original model printing the helmet visor weird since the external visor is so thin and the model has an internal visor preventing infill from getting to the front of the helmet. Corrected it in blender by…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Guybrush Ulysses Threepwood is the main character of the Monkey Island series of computer…
Grille aération pour tuyau P.V.C1 00 mm. Diamètre de la grille 93 mm Ext pour vide sanitaire ou autres.
You'll need a little glue between the ‘’Connector'' and ‘’Body'' part. You should put glue between the hands and the arms too.
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D This is the Chill guy, in 3D! Print one chill guy and gift it to a chill guy! "Chill Guy" – Too Cool for Drama 😎 Meet the definition of…
Wearable helmet of the golden Daft Punk Guy.
Once upon a time, there was a LEGO figure named Steve. Steve was an adventurous soul, always seeking new and exciting experiences. One day he overheard a group of friends sharing an intriguing legend. The legend spoke of Max, a courageous…
Capture the essence of The Chill Guy in 3D—a laid-back legend radiating pure unbothered energy. This character is the embodiment of effortless coolness, standing confidently with hands in pockets and a posture that screams, 'life’s too…
This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…
made with tinkercad thats a original model, but it would be more convenient if people found it in these models ( SpringBonnie 13 and Dummy 13) remixes for anyone wondering " why 2 diferent files? ", well, it turned out that the ball joint…
This is my first model and also my own model plus some others which I give credit to when putting together you will have to use a bit of force and will have to and a couple of joints which you can find from the original creater of the…
The source marked this model as adult content.
I've created this simple model to mount the “Tuya ZY-M100 Human Presence Sensor” that I got recently to stand upright on my desk, instead of mounting it on the wall. I've created the side-ways version which allows it to be low profile but…
Subscribe Now! Remix to support free. (Original https://www.thingiverse.com/thing:1131440 ) Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! Addiction to 3D Printing? Watch these time-lapse!…
Use this simple part to tighten lines for tents, tarps, or ridgelines. Scalable to any diameter line you need. No support needed.
It doesn't have supports. More characters are coming. it also can be used for mario kart monopoly because there are some characters that you have to buy. This is one of my first creations so it can have mistakes. anyone can do remixes and…
Tornado Foosball Guy A foosball replacement guy based on Tornado brand foosball tables. If you plan to use this on a foosball table, print with a large percentage infill with a strong material. These guys take a lot of abuse. Tornado…
Update 2026: Das Ersatzteil wurde nochmal überarbeitet in der Version 1.2 mit nur 4 Schlitze. 4 Schlitze reichen aus um den Gewindering auf das Ersatzteil zu schlieben. Jetzt sollte das Ersatzteil um einiges stabiler sein. Außerdem wurde…
These three hole rope tensioners are great! I couldn't believe this model wasn't already on thingiverse. Use them for any rope. Tents etc. Category: Sport & Outdoors
the sensor is from aliexpress: (20x25x71 mm) https://de.aliexpress.com/item/1005006008193742.html the two parts just snap together I would only print this in white :) Other colors including black will heat up more in the sun! printed with…
ARTICULATED SHARPIE GUY As requested, here is my articulated version of the Sharpie Guy. I designed this based off the 3.5" G.I. Joe's from my childhood. I printed mine at a speed of 50, with a resolution of 0.2 mm. Assembly instructions…
I'm P1lotz and I am a Danish 3d artist. video: Today I made a Ryan Reynolds' Guy from Free Guy into a Funko pop. The model is supposed to look like Guy in the posters, where he opens his blue (look at the picture below). shirt, just to…
Introducing the Guy Fawkes Half Mask. For optimal print quality, it's recommended to use support structuring during the printing process. After thorough experimentation, tree support has been proven to be the most effective and…
Lucky 13 Guyver head If you like it --> press like it :-) Guyver head as a remix for the funny lucky 13 figure. The original is from iczfirz . Take a look at my models, there you can find some more equipment for lucky 13. Would be happy…
Guy Insulator for antenna towers, guy lines, sailboat back stay antennas, and anywhere you may need such an item. Designed with 10mm hole for your line or wire. Easy to scale to whatever size desired. I like 100% and 80% for my needs. If…
https://wuuya.net/tree/ I recommend to use vegetable oil, so the concrete do not stick to the molds and the molds can be used again. To make it longliving just use a chain inside the concrete. The minimum sice of the prindbed to print…
Now you can have your trendy game character as cute night lamps. Fall Guys and Among Us You will need some ultra-bright leds and a clock battery, this project needs some basic soldering skills and bend some pins and wire, nothing…
I DO NOT technically own the rights to the original character (ming and disappering guy in this case), but this time I created the design of the mesh myself. I ENCOURAGE buying the official stuff from the website here:…
Give your Sharpie a bit of personality with this mod. Requires supports to be turned on. I printed at 0.2mm layer height with a speed of 100. If you have any questions, don't hesitate to ask. UPDATE: I made an articulated version of this…
The file may be really small. Resize to your desired size. Print is quite scaleable I wouldn't recommend printing more than a .2 resolution Paint how you want! /!\ Be cautious of the leg stands when removing supports. They are a bit fragile
Stewie from The Family Guy Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
I looked around a lot (and I mean a lot) to find a proper chain link to use together with my version of speedbump . No way!! Don't get me wrong. Many of them worked, but I'm a perfectionist and I wanted one to put the chain perfectly in…
For TuYa ZG-227Z temperature and humidity sensor, but should fit other ones (WSD500A looks like has the same dimensions). The top is screwed to the base plate, base plate can be screwed to a post / wall. No support needed, print in…
Scan of the screen used original head
Descripción Perfil Vslot 2020 el cual incluye pieza de unión entre perfiles de 90° para fabricación en impresión 3D. Especificaciones : El perfil V-slot 2020 de impresión 3D se diseño con el objetivo de que sea una copia exacta del perfil…
I made a remix of this excellent radiation shield to use Aubess Tuya Zigbee Temperature Humidity Sensor. These sensors are very popular and available, so I wanted to try them outdoor. Buy here Size is compatible with the original design…
Designed with the Amateur Radio community in mind. Designed to wind up Antenna Dipole legs to keep them tidy and kink free. Other great uses are for 550 or paracord, kite string, fishing line, etc. it requires any type of elastic cord to…
Subscribe Now! Remix to support free and printed. Time-lapse print video : Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! Addiction to 3D Printing? Watch these time-lapse! https://youtu.be/-ZsXFX6hjXk…
A miniature to celebrate the fact that doom eternal is coming this month! If anyone wants to help with a tip so I can buy a copy, that would be swell! But if not, Why not post a picture of your make? Thanks for printing! Have a free…
I make Banana head for Generic Figure (6:1 LEGO) by @bigbricks. PRINT SETTING 0.2mm layer height 3 walls 5 bottom shell layers (optional) Rectilinear infill parttern (optional) Auto Tree support I officially move to Thangs…
English / Spanish Print two “base” units and one “aro”. To save space it was designed without a handle. Enough pressure is made with the hands to shape the hamburger. I used it to make salmon burgers, it can also be used to make vegetable…
A simple holder for Tuya tempeature / humidity sensors. It is designed to be hanged with one screw (see pictures). The sensor fits easily in the holder and is hold by gravity. Print in PLA or PETG.
The 3D printing model is designed for a pool pipe support that prevents hose twisting in swimming pool systems. This essential component ensures efficient water flow by securing pipes in place, reducing the risk of kinks and bends. The…
Sur un Peugeot 5008 2 et 3008 (et peut-être autres modèles de voitures), cette agrafe accroche le tuyau (qui amène le liquide de nettoyage du pare-brise vers la brosse) au bras en métal de l’essuie-glace . Il y a 2 agrafes par bras…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Basic ShyGuy mask. Optional anchor points for attaching a string or elastic. May need a dab of glue to hold them in place. Also added a split version for less supports and smaller print beds.
Simple guying line spooler. I made it for my amateur radio station. You may also use it for kite or as a general paracord spooler. Print instructions Thin version is 5mm, thick is 7mm. I printed this from PET-G.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A chibi style figure of Inuyasha, an anime character. Two versions uploaded. The only difference is one has modeled eye features. Printing Tips Supports are required. Rotate around X-axis in backward for ~30 degree. Other orientations may…
All of us have been camping, tripped over a rope and dropped something. well I certainly have which is why I designed this simple guyline highlighter. Now you can freely walk around at night without fear of tripping over. Quick Print :)…
MP40 wallbuy from Call of Duty Zombies games. Using Xbox 360 buy icon. Can do filament swaps / multicolor for the text and x button.
triple garden hose connection
My friend loves shy guy from Mario Bros, so I made him a bobble head! It's a pretty good size and will take around 8+/- hours to print everything. It printed with little flaws and works pretty well. I made some adjustments to the…
Sensors just clips in. Screws to a wall or ceiling with just one 3mm screw. Prints without supports. Freecad file included with parameters for sensor size. Different case sizes exist! Tuya_ZY-M100_Wallmount_small for sensor with a…
The 4 main pieces form a square in one configuration. When rearranged, the 4 pieces apparently form the same square with one piece missing. The secret of this puzzle involves Fibonacci numbers. A very good, brief explanation with…