Search results: v60

Sort order

Counting matching models…

P
Printableswhoppingpochard

Hario V60 filter holder

I wanted a little filter holder for my Hario V60 coffee filters, and needed something different from what I could find here. My design criteria: horizontal access to filters (will be located in shelf inside cabinet) slightly angled to…

Downloads
3,201
Likes
379
Rating
4.98
P
PrintablesBootjevaarder

OHC V60 Ultramax Engine

General A Overhead Camshaft engine is an internal combustion engine with the camshaft placed in the cylinder head. The NSU Ultramax camshaft drive operates with 2 push rods, which rotate on eccentric disks. Details you can find here:…

Downloads
1,444
Likes
1,201
Rating
5
P
PrintablesMeyui

V60 Coffee Paper Filter Stand

V60 Coffee Filter Stand This V60 Coffee Filter Stand is a detachable holder designed specifically for V60 cone filters . With an angled frame , the stand supports the natural curve of the filters, keeping them neat , upright and easy to…

Downloads
1,082
Likes
414
Rating
4.92
P
PrintablesRH3D

V60 coffee dripper

Slightly modified version of V60 coffee dripper that doesn't need supports (I changed the handle and the bottom part with smaller overhangs and separated rim), you just slide the rim on the body and eventually put glue to the joint if…

Downloads
933
Likes
93
Rating
4.2
P
PrintablesBootjevaarder

V90 8 Cylinder Engine (v60 4 cylinder)

Printing The cylinder head is very detailed and could cause problems on some printers. In that case please use the “simplified” version of the cylinder head. The Cylinder Head is printed with support. Beware of seams on axles and…

Downloads
915
Likes
485
Rating
5
P
PrintablesGP

Hario V60 Filters holder (wall/door mount)

I'd recommend to print it vertically to avoid any unnecessary bridging/supports. Use a tiny bit of double-sided sticky tape to fix it in place.

Downloads
538
Likes
78
Rating
5
P
Printableswit4r7

Coffee filter holder Chemex, V60 and AeroPress

I have several coffee filters that were never neatly stored in the cupboard.Therefore I have designed this holder. Attention! Despite several adjustments of the Brim/Mouse ears on the side, the pressure did not stick to the sheet all the…

Downloads
451
Likes
72
Rating
5
P
Printablescaaalvin

v60 Paper filter Size 02 Holder

A simple but elegant v60 paper filter holder for 100 size 02 Filters. I've included the signature emboss on the paper filter into the design. Looks great, good tolerances and fits the purpose.

Downloads
423
Likes
40
Rating
5
P
PrintablesPařez

Gridfinity Coffee Filters Organiser - V60, Aeropress, Vacuum Pot, Chemex, Moccamaster

I wanted to organise all our office coffee equipment and accessories, but I couldn't find any good existing solution. So I made my own using gridfinity system! I will be adding new models as I finish printing them so I know they are ready…

Downloads
401
Likes
83
Rating
5
P
PrintablesIlutart

V60 Hario Filter Holder

White text on the final print: Lasering. Parameter setting: Whatever Support: No

Downloads
359
Likes
36
Rating
5
P
Printablesjmar

V60 Coffee Filter Holder

This is a holder/stand for v60 coffee filters. This is the first thing I've designed/modeled/printed. If I were to print another, I'd make it about 1-2mm longer. The filters I use are about 133mm long Print Settings Printer: Voxelab…

Downloads
352
Likes
50
Rating
5
P
Printablese0en

Hario V60 filter Holder

A holder designed for Hario V60 coffee filters. It holds up to 100 filters and allows for easy, single-filter extraction without disturbing others. Designed for reliable printing without supports or brims, this single-part model requires…

Downloads
345
Likes
36
Rating
5
P
PrintablesDamian

Hario V60-2 coffee filter holder

Simple holder for Hario V60-2 filters. Prints without support. No glue is required for assembly. Print Settings Rafts: No Supports: No Resolution: 0.3 Category: Kitchen & Dining

Downloads
318
Likes
33
Rating
5
P
PrintablesAHOJ

V60 filter holder

Print with spiral mode. 0.4 nozzle

Downloads
312
Likes
43
Rating
4.83
P
PrintablesPliind
Downloads
309
Likes
34
Rating
5
P
Printableswit4r7

Coffee Drip base for Hario V60 (02)

I designed this drip tray for my Hario V60 filter. It is for the 2-3 cup version of the V60. The Aeoropress also fits in it without any problems to catch the dripping after the brews are finished. I printed it in 0,2mm PLA. But PETG could…

Downloads
290
Likes
48
Rating
5
P
Printableslucio

Hario V60 - '02' filter paper holder

A simple Hario V60 ‘02’ filter paper holder for easy and neat storage.

Downloads
279
Likes
16
Rating
0
P
PrintablesSt. Luck

Epson V550 / V600 35 mm Film Holder for Scanning Negatives with ANR Glass

A remix of cudderbup's design over on Thingiverse. I've uploaded different versions / heights to find the best focus for you scanner. I'm using the 0.6 mm Version with ANR glass on top of the negatives. To use it without the ANR glass, a…

Downloads
278
Likes
40
Rating
4
P
PrintablesWhity

Hario V60-03 Filter Holder

A simple remix of whoppingpochard 's Hario V60 filter holder to fit size 03 filters. Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut of any order you…

Downloads
269
Likes
30
Rating
5
P
PrintablesZfrenchy

126 Film Holder for Epson V600 scanner

An holder for Espon scanner V600, for 126 format negative film. Design with DesignSpark Mechanical (Free software)

Downloads
267
Likes
28
Rating
0
P
PrintablesKian Ryan

Cold Brew V60 Compatible Coffee Funnel for PET Bottle

A V60 compatible funnel designed for direct attachment to a standard 2L PET soft drinks bottle for creating cold brew. Inner funnel leads directly to bottle, outer ring house screw thread to mate with bottle. Should be leak free. Printed…

Downloads
265
Likes
18
Rating
5
P
Printablesegor

4x5 film holder for Epson V600

This holder allows scanning of 4x5 negatives on the Epson V600 scanner (as well as similar models like V550). I copied the dimensions given in this reddit comment: https://www.reddit.com/r/largeformat/comments/eha6mw/comment/fqynpni Also…

Downloads
257
Likes
27
Rating
0
P
PrintablesDamian

Hario V60 dripper keychain

Hario V60 dripper keychain

Downloads
253
Likes
43
Rating
5
P
PrintablesDarkaegis

110 Film Holder for Epson V600

Edit: You may want to use this model instead, because I've since tweaked it a bit to include some support at the bottom of the negative to keep curved bits flat, among a few other things. I'm keeping this one up in case they'd rather use…

Downloads
240
Likes
19
Rating
0
P
Printablesm45

Coffee Filter Holder for Hario V60 Size 2

Coffee Filter Holder Brand: Hario V60 Variant: Size 02 Capacity: 100 sheets V2 fixes the thumbhole position so it better aligns with the filter tab. Printed with Polymaker Polywood PLA

Downloads
233
Likes
21
Rating
5
P
PrintablesBoluge

V60 Filter Shaper

☕ Enhance your brewing experience with this 3D-printed mold designed to give your V60 coffee filter the perfect shape . Its precise design ensures an ideal fit in the dripper, prevent folds and bypasses to ensure even extraction. This…

Downloads
230
Likes
36
Rating
5

APS filmholder for Epson V600

Scan your APS film with this film holder for the EPSON V600 Scanner. You can scan 2 strips of film in one go. Top part is clamped to the baseplate with 18pcs of 3x1mm Neodymium magnets. Also available for Instax Mini and Polaroid film.…

Downloads
221
Likes
19
Rating
0
P
Printables3dprintkings

Volvo V60 (B4) - Key Chain

please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and 3.90mm and use a prime pillar

Downloads
209
Likes
33
Rating
0
P
PrintablesMichael Fomenko

Coffee filter holder Chemex, V60 and AeroPress - For 2 Hario (02) filters

Redesigned version of the “Coffee filter holder”. Remix of this filter holder features a slimmed-down base with removed writings Second V60 slot designed to accommodate (02) filters Aeropress filter slot that can accommodate multiple…

Downloads
201
Likes
29
Rating
5
P
PrintablesEugen

volvo v60/v90 charging cable support for trunk hook

Made this model for a close friend that has an v60 plugin hybrid. After few tests this is my final design. Made as a beginner in Fusion 360. volvo charging cable for trunk 2 is longer foot for better grip inside the hole ( in the back of…

Downloads
178
Likes
24
Rating
4.5
P

Hario V60 Filter Holder

My wife was upset about V60 filter holders available in market so she asked me for one. Since she thinks it is more practical to take filters from top rather than pulling it, it came out in Aeropress style filter holder. It can hold about…

Downloads
174
Likes
17
Rating
5
P
PrintablesMalcolm

Flat Foldable V60 Drip Coffee Filter Holder - HTPLA

I made this with HTPLA that I annealed in the oven to make it withstand boiling water. I'll upload another version (arguably better) to work with PC. Consider coating with something to make it more food safe. Print 100% infill **The…

Downloads
174
Likes
24
Rating
4
P
Printableskkazimk

Collapsible V60 Dripper

Collapsible V60 Coffee Dripper for taking your joy of brewing everywhere! Compact size yet still elegant design!

Downloads
166
Likes
24
Rating
0
P
PrintablesMalcolm

Flat Foldable V60 Drip Coffee Filter Holder - PC

This is an ultralight, ultra thin (0.45mm) coffee filter holder. I've made it specifically for printing in PC to keep it as light as possible yet hold up to the boiling water temperatures. Print with either 3 layers at 0.15mm layer height…

Downloads
161
Likes
41
Rating
5
P
Printablesbostrt

Hario V60 Size 01 (small) Filter Holder

A simple holder for Hario V60 Size 01 (small) filters. This holder is meant to be hung on inside of a cabinet using a 3M Command Strip or similar double-sided tape. There are two versions available to download: Full size holder (fits a…

Downloads
144
Likes
15
Rating
0
P
PrintablesKarol

V60 Filter Dryer

Coffee dryer for filter from Hario V60. Fit well for V2 filter. Printable without support.

Downloads
142
Likes
26
Rating
5
P
PrintablesZack

V60 Coffee Filter Storage

This is intended to nicely display V60 filters in a countertop coffee brewing area, making them easily accessible without being an eyesore. I suggest printing with a fairly high infill, 20% or more, to weigh down the base portion.

Downloads
137
Likes
20
Rating
0
P
PrintablesBerKon

Hario V60 01 Drip Tray

Simple Hario V60 01 Drip Tray. Should fit snug but can be easily resized to e.g. 100,2% in Prusa Slicer to make looser fit without modifying the model. Printed in Prusament PETG Galaxy for better heat resistance. No support needed.…

Downloads
124
Likes
23
Rating
5
P
Printablesweav

Qidi Q2 3010 Hotend Fan Mount *updated version for v51 and v60 Part Cooling Ducts added

3010 fan mount modeled after the OEM 2510 mount. Modified to suit my needs and providing the step if you need to customize for your printer. Use two 2.5x12mm screws to install the fan in the mount (will not protrude through the face if…

Downloads
123
Likes
27
Rating
5
P
PrintablesGhostflanker

Fluted V60 01 100 Sheets Coffee Filter Holder Caddy

Introducing the Fluted V60 01 100 Sheets Holder, the perfect accessory for coffee enthusiasts who value style and functionality. This 3D-printed holder is specifically designed to store and organize up to 100 V60 01 coffee filter sheets,…

Downloads
123
Likes
16
Rating
5
P
Printables🤖FPV

UFO Dripper V60 to 80° Filter template

How to Use Line up the stencil's right edge to the right side of the filter, left point to the left edge of the crimped filter. Make a crease. With the stencil still in place, cut along the curved edge. Use'N'Brew

Downloads
117
Likes
3
Rating
0

Coffee Dripper V60 01 paper filters container

Paper holding inner part for V60 01 filters. For outer shield use files from original project.

Downloads
115
Likes
30
Rating
0
P
PrintablesVirgil Roger

Epson V600 135 film holder replacement insert

The OEM film holders for Epson scanners are rather flimsy, and one might not need / want / have the money for expensive after-market holders. So when I broke my 135 film holder press-in insert, I just modeled a new one. Hope it might be…

Downloads
113
Likes
15
Rating
0
P
PrintablesRaoof Korabi

V60 Size 1 paper Filter Box

Container with a Lid for a V60 SIZE 1 paper filters I wanted a box with a lid so the filters don't get dirty while not in use and i designed one BONUS: Box fits more Filters than a single bag (100), so you don't have to wait until you…

Downloads
109
Likes
17
Rating
5
P
PrintablesHenk

Moccamaster V60 (or other pour over) adapter

This filter holder enables the use of a pour over set up with the moccamaster drip coffee machine. The holder centres the filter underneath the hot water dripper and is usable with different types of pour over holder. Ive used it…

Downloads
105
Likes
16
Rating
0
P
PrintablesHopeful Monster

Hario V60 Dual-Size Filter Holder 01&02

I really liked the original design by ‘whoppingporchard’ but I always have filters in both 01 and 02 size, and two seperate holders would seem to take an unecessary amount of space. So I tried to recreate the orginal design but combining…

Downloads
98
Likes
13
Rating
4
P
PrintablesJanos Kehl

V60 Filter Stand

I design my own coffee maker with wood, copper pipes, glas funnel and 3d printed fittings. The conclusion of all of this was that I also need a custom stand for the V60 Filters I am using. So I did a fast one on this one. It's simple, can…

Downloads
96
Likes
16
Rating
5
P
PrintablesLoender

V60 filter holder/stand

This design keeps your filters organized and easily accessible while taking up minimal space on your coffee station! It is designed for 02-size V60 filters but might fit the other ones. Feedback is welcome!

Downloads
90
Likes
11
Rating
0
P
Printablesmchangcreative

Hario V60 Size 03 (large) filter holder

While I could find many holders for the small (01) and medium (02) Hario V60 paper filters, I there were none for the large (03) size. So I made my own. It's no great achievement, but it is my first uploaded model.

Downloads
85
Likes
4
Rating
4
P
Printableslogosway

v60 01 filter paper holder

Nozzle: 0.4 (can print with 0.8 as well) Resolution: 0.2 Infill: 20% (I printed at 10%, works fine too) Material: PLA

Downloads
83
Likes
9
Rating
0
P
Printablesbad voxel

Hario V60 Scale under shelf bracket

I had this idea of mounting the Hario V60 Drip Scale (VST-2000) under the shelf where I keep my coffee and filters to save on cupboard space. Works flawlessly! Glued together with gel cyanoacrylate glue, and placed under the shelf using…

Downloads
82
Likes
37
Rating
5
P
PrintablesRui Nelson

Hario V60 Size 02 holder

Uncomplicated holder for V60 size 02 filters Should be an easy print in less than 60g of PLA. It has three spaces, each 15mm in depth, each space should hold 40 filters, so 120 paper filters in total.

Downloads
80
Likes
5
Rating
5
P

Volvo V60/XC60 phone/key holder

A basic model that fits snugly into the cavity right before the cupholder. The height allows the model to lock itself under the lip of the cavity and not wobble. The model has 3 pockets, one of which holds the key fob, the middle one…

Downloads
79
Likes
7
Rating
5
P
PrintablesArasti

Circular cable organizer V60

The updated spool reduced the sharpness of a cable bend. You can use this spool for organizing cables, earbuds, and other cables. This model is without supports. Thanks for comments :-) I printed in PETG, 0.20 mm. Other materials will be…

Downloads
79
Likes
9
Rating
5
P
PrintablesCyber Priest

SKADIS Type 2 Coffee Filter Holder V60 T-Clip

A nice, basic and minimalistic coffee filter holder utilizing T-Clips. Print it standing up with two clips.

Downloads
77
Likes
9
Rating
0
P
Printablesmiddeus

Hario V60 Drip Decanter Mug adapter

Pretty solid and tight fit. So the V60 won’t fall over while pouring. The adapter fits mugs with a diameter of 75mm or more. Category: Kitchen & Dining

Downloads
75
Likes
8
Rating
5
P
Printablesbostrt

Hario V60 Size 01 (small) Drip Base

A base or stand for your Hario V60 after brewing. Keeps your kitchen clean by catching the leftover coffee drips. Also, makes life easier when travelling to the trash can to dump the used filter and coffee. Currently, this model only…

Downloads
73
Likes
9
Rating
5
P
Printablesactionjacksonfm

Volvo V90/V60 Compatible Trunk Shopping Bag Hook (Remixed To Be Lower)

Shopping bag hooks which connects to the unusable trunk hooks of Volvo V90 / V60 This is a modification of the original Snap On version. It is easy to me to take on and off the hooks. I have printed these in PETG using the 0.15mm…

Downloads
72
Likes
10
Rating
5
P
PrintablesLTheCreator

Hario V60 02 filter holder

Hario V60 02 filter holder with 3 sections so they dont fall over :)

Downloads
69
Likes
5
Rating
0
P
PrintablesJHB95

Hario V60 02 Drip Tray

I got really annoyed by the extra droplets of coffee coming after brewing with my V60. This solved my problem.

Downloads
68
Likes
17
Rating
0
P
PrintablesD2mian

Coffee Filter Stand V60 Hario

I wanted to store my filter papers in a proper way. So I designed this filter holder for Hario V60 filters. You can use it for all sizes. No support needed :) Project from: https://www.thingiverse.com/thing:5019593/files

Downloads
68
Likes
8
Rating
0
P
PrintablesMcD5

Hario V60 02 Filter Horizontal Holder

This is a model I made to hold the V60 02 filters horizontally for ease of access to a single filter at a time. Print with the base down at desired infill, no supports.

Downloads
67
Likes
4
Rating
0
P
PrintablesAlex Howser

Hario V60 Skadis shelf

V60 shelf for Ikea Skadis pegboard. Hooks taken from https://www.printables.com/model/118225-ikea-skadis-fusion-360-models

Downloads
64
Likes
25
Rating
0
P
PrintablesJames G

Coffee Filter Holder for Melitta #2 and Hario V60 (100 count)

Parameters of note in the f3d file include: Holder depth - 2 inch by default (for 100 filters). Wall angle - 40 degrees for Melitta, 45 for V60. Holder top width - Width of the holder at the top, 6 inches by default. Adjusting these…

Downloads
62
Likes
15
Rating
5
P
PrintablesInkee

v60 01 Filter Cutting Stencil

i've been buying 02 size paper filter for the plastic 02 v60. bought and tried out the plastic 01 v60 and prefer it more and wanted a stencil to help cut my existing filters instead of buying new ones. i place the filter on the stencil,…

Downloads
61
Likes
6
Rating
5
P
Printablesaoshimak

HARIO V60 dripper holder : diameter resizable

This is a coffee dripper holder for HARIO V60 glass dripper. The specialty of this holder is: -The locking nail tightly hold the neck of the V60 dripper. -The rim of the plate hooks glasses or pots lightly. -The diameter of the plate is…

Downloads
60
Likes
4
Rating
0
P
PrintablesRanderzz

Double V60 Filter Holder

Simple holder for V60 filters size 01 and 02

Downloads
60
Likes
4
Rating
0
P
Printablesphodgson

Hario V60 coffee filter holder

A simple wall-mounted coffee filter holder

Downloads
60
Likes
11
Rating
5
P
PrintablesMikeJewski

Coffee Filter Holder for V60 and Chemex

Holder for v60 and Chemex square filters. Printed in PLA, no supports needed

Downloads
60
Likes
7
Rating
0
P
Printablesrjbulger

V60 Coffee drip stand

A drip stand for a V60. Designed to fit mugs between a diameter of 82mm and 99mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Any PLA Category: Kitchen & Dining

Downloads
59
Likes
12
Rating
0
P
Printablesmatttt

Coffee Filter Holder - No Supports! - Hario V60 02 Size

No supports needed, print oriented as seen in the photos! I used 100% infill in PLA because I wanted the base to have some heft, but I'm sure 20% infill would be fine.

Downloads
57
Likes
12
Rating
0
P
Printablestpt

v60 filter holder for honeycomb storage wall

A basic v60 filter holder for the honeycomb wall storage system. Fusion file included if you'd like to make changes.

Downloads
57
Likes
14
Rating
0
P
PrintablesDarthLuke19

Kaffeefilter V60

Hier handelt es sich um eine Aufbewahrungsbox für Kaffeefilter der Größe V60. Achtung: Auf den Fotos sind Filter der Größe 4 abgebildet, da ich die original Größe V60 nicht für das Foto zur Verfügung hatte.

Downloads
57
Likes
5
Rating
0
P
PrintablesSkyRaptor

V60 Filter Cone Holder

Tired of unfolding your filters and trying to get them settled into your V60. Store your V60 filters in their unfolded state so you're ready to make great coffee at a moment's notice! This holder will hold as many filters as you dare…

Downloads
56
Likes
8
Rating
0
P
Printablesarel baskan

Hario v60 Dripper holder for IKEA Skadis

For coffee lovers, I designed a Hario v60 Dripper holder for IKEA Skadis. This is for size 2 dripper. You can easily print it using PLA or PETG filament. I used PLA Tough and it worked fine. Just follow these simple printing instructions,…

Downloads
56
Likes
11
Rating
0
P
PrintablesDIYgrandpa

V60 Hario Filter Holder Size 01

This is a Hario 01 size coffee filter holder, based on a model by Ilutart. Their model is perfect for size 02 filter papers. I reduced the width and height of the model to about 80% to keep the proportions intact. The depth remains the…

Downloads
54
Likes
1
Rating
0
P
PrintablesCodifer

V60 Coffee Filter Holder

Coffee Filter Holder for V60 filters. (pour over) also slots for holding spoons as well. printed in PLA with supports

Downloads
54
Likes
20
Rating
0
P
Printablessage

Coffee Filter Holder V60 #2

Coffee filter holder for drawer. Hole to screw into corner

Downloads
54
Likes
9
Rating
0
P
PrintablesSander

4v60 Vault (organelle)

Protein model downloaded from : https://www.rcsb.org/3d-view/4V60 Authors: Kato, K., Zhou, Y., Tanaka, H., Yao, M., Yamashita, E., Yoshimura, M., Tsukihara, T. Converted to STL with https://imagetostl.com/convert/file/glb/to/stl#convert…

Downloads
49
Likes
2
Rating
0
P
PrintablesMilan

Inner diffuser hooks for Godox softbox SGGV6060

Optimized hooks for the inner diffuser sheet of the foldable Godox 60cm x 60cm Softbox (Godox SGGV6060). The inner diffuser attaches to elastic loops inside the Softbox with four small self-locking steel hooks that are fiddly to attach…

Downloads
48
Likes
11
Rating
0
P
PrintablesMarkus S.

V60 Filter Case Size 01

I wanted a case to take my filters with me in the camper van. So, inspired from the original model I made a version for the smaller 01 filters I've added some cutouts to glue in magnets (4x1mm) which helps the case stay closed. The…

Downloads
48
Likes
8
Rating
0
P
PrintablesDaniel Bispo

Conical v60 #2 coffee filter holder

Inspired by poom3d's Conical #4 Size Coffee Filter Holder, i've created this one to hold my Hario v60 #2 paper filters. I used 1,5mm wall thickness and made it 42mm wide inside to hold 100 paper filters. Print notes: Nothing fancy here,…

Downloads
48
Likes
2
Rating
0
P
Printableshjzl16

Bottle Holder for Volvo V60 2018

Volvo V60 is a great car, but the absence of any holder for proper water bottle drives me mad. Fortunately there is nothing that cannot be fixed by 3D printing. Therefore I have designed a simple holder to fit a 1l or 1.5l bottle. The…

Downloads
47
Likes
10
Rating
0
P
PrintablesMichael Jones

Hario v60 Filter Paper Holder (size 02)

v60 Filter Paper Holder Fits about 100 size 02 papers neatly. Looks kinda cool and uses a relatively small amount of filament (less than 58g including supports for me). Printed in PLA on a Bambu P1S with tree supports.

Downloads
45
Likes
5
Rating
5
P
PrintablesJoost

Filter holder for V60 and Aeropress

Simpel filter holder for size 02 V60 filters and for the standard Aeropress filters. Made in PLA with 2 walls and minimal infill. I put some anti slip feet on the bottom.

Downloads
45
Likes
4
Rating
0
P
Printablesnanderson97

Hario V60 Size 02 filter holder

A simple holder I made for holding v60 filters. Is sized to hold ~40 size 02 filters. Assembly: Print all pieces, remove supports if used, use super glue to attach sides to holes in base. May need to slightly file down pieces depending on…

Downloads
45
Likes
5
Rating
5
P
PrintablesFernando Pena

V60 Coffee Dripper Lid (Size 2) - Weird Coffee Person

If you're a Weird Coffee Person like me and you have your v60 sitting on a countertop or shelf waiting for you to use it the next time, I bet you already thought about having a lid for it. I designed this lid to keep dust out of my v60…

Downloads
45
Likes
7
Rating
0
P
Printablestaneyats

HARIO V60 Dripper and Filter Tray

HARIO V60 02 filter drawer and dripper base. It can hold 100 filters and dripper on the top of the box. Please print the outer model with a 90-degree rotation as shown in the picture. Organic patterns are recommended for the support…

Downloads
45
Likes
8
Rating
0
P
Printableswhoitwouldbe

Hario v60 02 Ceramic Dripper Drip Tray

This is a drip tray and holder for the Hario V60 02 Ceramic coffee dripper. The idea was to collect drips off the dripper after rinsing and serve as home spot fort the V60 in my coffee corner. It prints and assembles in 2 parts for easy…

Downloads
44
Likes
1
Rating
0

Volvo V60 Battery Cover Latch

Just the latch your car battery cover closes with.

Downloads
44
Likes
2
Rating
0

v60_3D_prt

v60 pour over device not to be printed with PLA

Downloads
44
Likes
8
Rating
0
P
PrintablesMatthew Schultz

Hario V60 Large Mug Adapter - v3

Large mug adapter for a Hario V60 Ceramic Drip Coffee maker. This v3 version is a single piece. It's chonkier than my first version , but there's also nothing to break/lose. A marker indicates the top so you don't have to think during…

Downloads
44
Likes
7
Rating
5
P
PrintablesJoelAbq

LG V60 mount for Octo4a arm and turntable

Use the Arm and Turntable from https://www.printables.com/model/136795-octo4a-phone-holder-to-run-octoprint-on-your-smart This is a designed from scratch model since I could not figure out the original's STEP file to change dimensions.

Downloads
43
Likes
4
Rating
0
P
PrintablesThibaud

Third row seat anchor cover latch arm for Mitsubishi Pajero V60 long wheelbase

This part is a replacement for the third row seats hinge cover rotating latch arm designed to fit my long wheelbase V60 Mitsubishi Pajero. It should also fit the more recent V80 models, but I have not tried that. While the left and right…

Downloads
43
Likes
5
Rating
0
P
PrintablesSample Coffee

Hario V60 filter holder (wall-mounted, no supports needed)

This is a modified version of a previous design ( https://cults3d.com/en/3d-model/home/hario-v60-abaca-paper-filter-holder ), so it can be printed with no supports (no material waste!). There are 3 files designed to suit Hario V60 01, 02…

Downloads
42
Likes
6
Rating
0
P
Printablesgamberoillecito

V60 filter holder (adjustable)

I wanted a way to hold together different filters that allows easy access to them while keeping them upright. This model accomplishes all the requirements using an adjustable “clamping” mechanism that can be adjusted for any amount of…

Downloads
42
Likes
11
Rating
5
P
PrintablesSatler3D

V60 filter box

Printer: Ender 3 - Sprite PRO extruder Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: Inner part: 100%; Outer part: 20% Filament brand: Azurefilm Notes: Used 0.1 thermal expansion but must be at least 0.2

Downloads
42
Likes
11
Rating
0
P
PrintablesHEROAAA

Hario Zebrang V60 dripper holder

The original holder is unnecessary big for camping. This is a smaller version fits cup diameter smaller than 90mm,I also remove part of the cutout for stability. Fusion 360 file is also included. PLA is not recommended for the use case.

Downloads
40
Likes
5
Rating
0
P
Printablesdangroshev

Hario V60 size 02 + 03 coffee filter holder

Sometimes you just want more coffee. This is why I got myself a second, larger V60. Life became perfect, until I got annoyed by having two stacks of filters in the cupboard. This holder solved this unbearable problem for me; it might help…

Downloads
40
Likes
13
Rating
0
P
Printableshjzl16

Volvo V60 2018 coin holder

Coin / shopping cart token or RFID token holder for Volvo V60 and X60 model years 2011-2018. The holder is installed using double side scotch tape into the cup holder.

Downloads
40
Likes
6
Rating
0