354 models
Extra strong wall hook collection - 6 variations + STEP file
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Inspiration: https://makerworld.com/en/models/815908-over-door-hook-wall-shower-hook-many-thickness#profileId-767349
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
If the bearings are stuck, try using a small flathead screwdriver to free the balls. Occasionally, the tight tolerances can cause the small components to stick together. Happy Printing :)
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Electric Cable mounts, mounted using screws D=3mm or double sided tape. Parametric using the STEP file :)
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
4 Variations. Customize to your liking using the STEP file. suggestions are also possible :)
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
I found wall mounted steps on amazon and thought this could totally been done with 3D printing. Please use care when printing and mounting, use drywall anchors or mount into studs. High infill is a must for strength. If needed scale it to…
Print approx. €11.29–€13.80 excl. taxPreliminary estimate for one variant
Electric Cable Diameter 5mm -> 10mm, mounted using screws D=3mm. Parametric using the STEP file :)
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
A set of several old stone gravestones featuring runes/engravings, damage, and various carved patterns. I love these as scatter because they're a great mix of detail, built-in weathering, and print-and-forget. You can print a whole bunch…
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
A set of several messy bedrolls featuring messy blankets, pillows, and textures. These are great scatter because they are print-and-forget, and feature enough texture that you can get a lot of life out of them with practically no painting…
Print approx. €1.34–€1.63 excl. taxPreliminary estimate for one variant
Background I don't know if this happens to you, but maybe? You work in a profession or an industry, and everyone in your family and your circle of friends believes that you now know every detail that could be nearly related to it. "Hey!…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
IKEA don't sell replacement glass lampshades for their common TÄRNABY table lamp, so this was my solution… Original single walled vase mode print worked well but was a little flimsy so I decided to use a lattice vase mode technique I've…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
While designing scatter for my farming village I realized that I was missing some sort of community post board - a common element of fantasy stories. I've designed two variations, one with support for a paneled wooden roof, and one…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
Simple and sturdy tablet stand with a few variations Tablet Stand - Normal Lip For most iPads and other tablets. (Purple print shown in photos) No supports needed Tablet Stand - Deep Lip For thicker tablets and bulky cases No supports…
Print approx. €8.21–€10.03 excl. taxPreliminary estimate for one variant
So I wanted to try designing a hook on type buckle that can be used with some straps for easy release. Could be used with Virtual Reality trackers like SlimeVR if your strap fabric fits fine. Quick release waist band? If you find a use…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
This is a bracket for a square perforated board (bott perfo branded, sold by bigdug.co.uk) to hold screwdrivers. I have designed variations for: small files (6x against 4 pegs) medium sized screwdrivers (5x against 5 pegs) large…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Hello everyone I would like to suggest some modifications to the excellent work of Rocco's Stuff Mini Vault. I enlarged the trunk to make it deeper. I added a shelf and a tunnel to use it as a piggy bank. I also prepared all the 3MF and…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
The bookRING Pure design bookend in 3 variations. Printed quickly, no supports needed, only 2-3 mm thick. All rings do have 150 mm diameter and are 200 mm long in total. Depth: 20 mm ------------ The bookRING Schlichte Design-Buchstütze…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
3 variants of Tetrahedron puzzles, each made of identical pieces.
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
Stackable Bottle Drying Rack This simple and practical bottle drying rack features a sturdy square design for stability and efficient drying. Its stackable design saves space and allows for easy expansion when needed. The hollow structure…
Electric Cable Diameter 4,5mm -> 8mm Mounted using screws or double sided tape
Print: On the side
Improved version - combination of 2 models Better locking mechanism to secure the wires larger adhesive area for double sided tape combination of following models:…
28/08/24 : Improved Tolerance with the V2 Nut
Improved version Better locking mechanism to secure the wires Want to have a commercial licence on this model? → Join the CLUB :)
Electric Cable Diameter 2mm -> 6mm, mounted using double sided tape The STL files are scalable
28/08/24 : Improved Nut Tolerance
M8 Metric style bolts in 6 variations: 8, 16, 20, 25, 30, 35 mm thread length. 1 style nut. Use 40% infill.
M3 Metric bolt - Handle collection. Perfect for DIY projects
6 different sizes M3 corner mount brackets: 25x25, 30x30, 35x35, 40x40, 45x45, 50x50 mm ( Parametric STL )
Fasten your electric cables with these M3 P Clips retaining cable fasteners. Cable outside diameter: 2mm - 8.5mm
M10 Metric style bolts in 6 variations: 8, 16, 20, 25, 30, 35 mm thread length. 1 style nut. Use 40% infill.
M3 Metric style washers in 9 variations of outside diameter: 7, 8, 9, 10, 11, 12, 13, 14, 15 mm.
explanation and inspiration https://youtu.be/wpriGP45Unw?si=TnForY9BNJB9B3wO
Description: These snug-fit mounts are designed for WAGO 221 connectors, offering 11 different variations to accommodate 3 and 5 connection WAGOs. The mounts are functional when the WAGOs are in place. To release them from the mount, use…
Customizable Bottle Drying Rack This simple and practical bottle drying rack features a sturdy square design for stability and efficient drying. Its customizable design saves space and allows for easy customization and expansion when…
M12 Metric style bolts in 6 variations: 8, 16, 20, 25, 30, 35 mm thread length. 1 style nut. Use 40% infill.
M5 Metric bolt - Handle collection. Perfect for DIY projects
BOM: M3 nut M3 x 16 screw Print in PETG for the best results :)
M14 Metric style bolts in 6 variations: 8, 16, 20, 25, 30, 35 mm thread length. 1 style nut. Use 40% infill.
M4 Metric style washers in 9 variations of outside diameter: 9, 10, 11, 12, 13, 14, 15, 16, 17 mm.
Phone wall mount variations. There are 5 models (Simple and “Complex”) and a dummy phone if you want to doublecheck dimensions by using a simple phone model. Small/Original I used it for a 158.3 x 73.3 x 8.2mm phone in a soft case so the…
I notice that all the Debris that falls of the nozzle lands behind the XL and also on the Power supply and Buddy Box. Ive tried to find a good way to catch all the Debris of the nozzle, that come off when the nozzle parks. Ive tried to…
M5 Metric style washers in 9 variations of outside diameter: 10, 11, 12, 13, 14, 15, 16, 17, 18 mm.
M6 Metric style washers in 9 variations of outside diameter: 12, 13, 14, 15, 16, 17, 18, 19, 20 mm.
M8 Metric style washers in 9 variations of outside diameter: 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
Update March 15, 2022 : Added simplified STL files. Blinky is the next step in evolution. Originally showing up in The Simpsons , we know his species lasts at least 1,000 years into the future as he also shows up in Futurama . Assembly…
There is a blank if you want to label your own or a few different word cards that you could use. As well there are 2 digit numbers 00-05. work well as real world access card holders or as costume props. There is a raised ridge on the tops…
There are seven models in this collection. Each is 150mm / 6" tall. Scaling them to 50% creates a decent bud vase. For receptions and gatherings, these can be set out on each table as a centerpiece or personal bud vase, with the intent of…
The boxes come with different sized areas to apply labels: 6 mm, 8 mm, 12 mm, no label. Each set has boxes in the following sizes: 1x1, 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 2x4, 1,5x2. All boxes with width 1 also come in a version with a center…
I built the Lack enclosure designed by Prusa ( https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ ), and wanted to move my Power Supply outside the enclosure since I would be printing ABS. But, the replacement frame brace…
To optimise my Allit EuroPlus Pro part storage case I created some custom inserts to be able to store more different parts in the same space. The smallest one is a 1x1, which is a quarter the size of their smallest insert. Available…
As I am a goldsmith, I was looking for some design jewelry display for my own made jewelry, which I could have in my workshop. I did not find any cool, so I had to make one for myself. So here it is for you… These stands are suitable for…
Should be printed in the original orientation. Use tree/organic supports: Support overhang angle: 60 Support density: 20 Support pattern: zigzag (If your are experiencing problems with tree support on cura, check the "minimum support…
This is a collection of 10 different layer fidgets. These include 4 basic shapes: star sponge spiderweb tornado and 6 transition shapes (from center to outside) star to sponge star to tornado tornado to star tornado to spiderweb spiderweb…
Another fidget to add to the collection, the gyro fidgets. I wanted to start exploring different ways to fidget with the simple gyro concept, which resulted in a few different simple variations. The plan is for these base models to turn…
LUCKY 13 has always reminded me of Gunpla and Mobile Suit Gundam, so I thought that I would make a version that looks like one. I've split the parts included with the original LUCKY 13 models, kh4j0's “Katana for Lucky 13,” BaGooN's…
This is a convenient clipboard, designed to be simple, intuitive and easy to use for practical use. The clip section only takes up 7mm of paper so you can save paper. It uses four 8*3mm neodymium magnets (two for mini versions). All parts…
Here are a number of remixes of the nice side Mount Lack table sheet holder by Slider. A two-slot version A three-slot version A three-slot version which has also been 'shortened' Print instructions I printed with 0.20mm layers PLA,…
A set of several archery targets featuring detailed a detailed rope circle target, various wooden frames, and a stencil to help paint target rings on the rope targets if desired! I love these as scatter because they're a great mix of…
I have only printed these in resin, although they would probably print in FDM just fine with either a small enough nozzle or if scaled up a little bit. For resin printing, I just print them standing straight up with some supports going…
My custom Violet Fungus monster designs for D&D! I designed these in Blender, using procedural texturing (for the ridges) as well as fully rigging the models to pose them. I'm sharing my 6 favorite variations, so if you're running an…
So, I attempted to make this for my partners makeup kit, but I snapped the shelf trying to press the lever arm in. It would probably be fantastic with PETG, however, she wanted a specific colour I could only get in PLA . It uses 24x of…
Print with the backside on the printbed :)
Ideal for presenting gifts (money, letters or vouchers)! A CODE CRYPTEX with six number rings. The six-digit code can be set as desired. There is a wide range of options for designing the CODE CRYPTEX. In addition, a core can be added as…
Visit my other design and give it LIKE! https://www.printables.com/model/1125748-educational-number-and-shape-puzzle-for-kids Meet the Spiral-Enhanced Santa Claus, a captivating 3D model designed to bring festive joy to your home. This…
Just some cute little prints to add to your Valentine's Day gifts! 🌹💖😍 The background is 2.4mm thick and the text is 1mm thick for color changing. Are you interested in selling your prints of my designs? Join my Printables Club , and…
Stackable work desk organiser boxes container, perfect for pens, pencils, small remotes or other small objects. 3 sizes
So I loved the original model created by Jan_P. It's very well organized and printed perfectly. it was actually one of the first things I printed on my CC. After a couple of days I had accumulated a few other tools in the area and wanted…
Here I Present you 10 various Shopping Coin Keychains I'm shure here's a motive you, your friends and family will enjoy Perfect as a tiny gift Motives: Heart Heart 2 Dog Paw Dog Paw 2 Cat Shamrock Music Euro Star Star 2 Have fun with this…
A set of several farm rakes with long handles and metal-like end caps. These are a part of my current work on farmstead scatter props, and can be used along with my other designs in this series to quickly print and populate a tabletop…
I printed a wall of 6 x wall-honeycomb-224x190size(mk3s).stl sections. When I came to put a border around the edge, I could not find a side piece that fit the final spot. I probably goofed something up, but remixing this piece seemed the…
I like the idea of having docks to display all of my electronics. Since the Sudomod community got me in to having a PS Vita, I needed a dock for it. Since all that was on here was a Raspberry Pi 3B(+) version of this dock, I took it upon…
Print flat, I don't know why the STL output with the models standing up from Fusion 360. The top side edge of the rounded pieces have a slight fillet. L-Brackets = 60mm x 100mm T-Brackets = 100mm x 100mm Short T Brackets = 100mm x 60mm…
UPDATE 2023-12-06: There was a slight measurement error in the base notch spacing of many of the originally uploaded models. I replaced them all with corrected files. If you downloaded and printed the old designs, they will still work,…
Außenmaße ca. 123,5 x 198,2mm im Originalmaßstab. Standardhöhe zylndrisch 40mm, gesamt ca. 52mm. 1 1/2 -fache Höhe (x1.5) zylindrisch 60mm, gesamt ca. 72mm. Doppelte Höhe (x2) zylindrisch 80mm gesamt ca. 92mm.
Here I present you the Pumpkin Halloween Keychains / Pendants The perfect Decoration for Halloween or a tiny Gift to share You can choose between 5 different Models, giving you a nice selection Have fun with this print. Don't forget to…
Das gezeigte Modell im Bild ist mit einer 200mm breiten HPI-Karosserie und mit Offset -3 bestückt. The model shown in the picture is equipped with a 200mm wide HPI body and offset -3. Die Felgen sind in "meinem" Standard-Offset…
There are two versions: A base with a wedge that can be mounted to a work surface while the arm can easily slide in and out of the base plate. The arm can only move perpendicular to the base as opposed to … A swivel base that can rotate…
These fit the 1/4" drive socket sets I have and I have created versions for other common variations based on available dimensions. These will hopefully work for you if you have a set that matches one of the combinations below. 9pc: 5, 6,…
Two styles here: Tilt with forward angle (normal desk use) Tilt up with lower anchor to hold in place (for my poor basement ergo setup) I like to keep two variations on desk and swap every few days to avoid repetitive injury, I think that…
These fits 3/8" drive impact socket sets I have and I have created versions for other common variations based on available dimensions. These will hopefully work for you if you have a set that matches one of the combinations below. 10pc:…
Dvě varianty dekorativní krabičky. První má reliéfy na spodku i na víku. Druhá má hladký spodek, zdobení je jen na horní části víčka. Lze tisknout barevně i s jedním extruderem. Rozměry: Vnější: Varianta s reliéfem: 82x82x62 Varianta bez…
This is a collection of 4 different layered fidget spinners. These include 4 basic shapes (each with a empty & solid center) star spiderweb sponge tornado All of these are 18mm tall and roughly 75mm wide. I highly recommend using the…
This is a box that can be used for multiple things including holding a candle, napkin, and pens. This tree silhouette box comes in 2 different variations, one with 4 different sides with trees on all of them and one with trees on just 2…
Einfach zu druckendes Schlüsselbrett. Entweder mit 2 Tesa Powerstrips ankleben oder anschrauben. Either stick it on with 2 Tesa Powerstrips or screw it on.
This is a really quick and easy tool to help you remove/install the frame locks. It has imprints in 2 directions so it works both at 0 and 90 degrees. The spacing has been scaled up 3% from the original frame locks so regardless of your…
If you are looking for spool rollers for my Ikea 365+ drydox design they are all found in the same 3D model page . But if you are looking for my versions of spool rollers for Armin3dp's drybox you have just found them. For normal width…
This model was inspired in part by the show “Hello Tomorrow” - and also by my interest in science fiction. There are two variations of this model : Simple - single print, tail-standing version Not so simple - this version has a stand, and…
Custom Jett Keycaps for Cherry Mx Profile (mechanical keyboards). Make your keyboard more colourful! Bundle includes 24 keycaps with different designs. Round type: -4 ability keycaps (outwards) 3D profile (flat surface) -4 ability keycaps…
Custom Gekko Keycaps for Cherry Mx Profile (mechanical keyboards). Make your keyboard more colourful! Bundle includes 24 keycaps with different designs. Round type: -4 ability keycaps (outwards) 3D profile (flat surface) -4 ability…
Holds antennas firmly in place + easy printing + polygonal design.
This bushing will allow for the attachment of the Starlink v2 (rectangular) dish to a standard 2" flagpole. It is secure with a simple worm clamp. There is an indent in the bushing that will allow the dish to log into place with its…
These fits 3/8" drive socket sets I have and I have created versions for other common variations based on available dimensions. These will hopefully work for you if you have a set that matches one of the combinations below. 10pc set 1:…
Custom Raze Keycaps for Cherry Mx Profile (mechanical keyboards). Make your keyboard more colourful! Bundle includes 24 keycaps with different designs. Round type: -4 ability keycaps (outwards) 3D profile (flat surface) -4 ability keycaps…
Just some fun variations of the almost iconic toothpaste squeezer design by Spidersky1489. Including: Squeezer with hexagonal hole (obviously) Light and Superlight Squeezer Frog Squeezer Happy printing!
These fit the 1/4" drive socket sets I have and I have created versions for other common variations based on available dimensions. These will hopefully work for you if you have a set that matches one of the combinations below. 7pc: 3/16,…
Remix der sehr praktischen Wago Aufbewahrungsbox von @vasekvol_284192 Ich präsentiere euch meinen Remix der praktischen Wago Aufbewahrungsbox, ursprünglich erstellt von @vasekvol_284192 auf Printables . In diesem Remix findet ihr nur die…
Clean and simple hexagonal replacement knobs for Prusa Filament Printers. There are 3 variations, so pick and download the one that you like. Compatible with both the i3MK3 and the Mini knobs.
