Search results: ventilatio

Sort order

918 models

P

3D Printed Circuit Splitter and Flow Restriction Devices for Multiple Patient Lung Ventilation

THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…

Print approx. €5.17–€6.32 excl. taxPreliminary estimate for one variant

Downloads
2,000
Likes
50
Rating
0
P
Printablessternli27

Car vent phone holder mount adapter ball joint ventilation clip

The clips supplied with the general car mounts don't hold well and that bothered me. Inspired by various similar holders, I came up with this version, which can be printed horizontally. The horizontal printing position improves the…

Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant

Downloads
1,206
Likes
150
Rating
4.9
P
PrintablesTomasz

Air conditioner exhaust into the ventilation window for 100mm duct

I recommend checking out remixes made by @ Hanak1nSolo and @ fneb Both are great, and could be a better fit for your specific case! You can find them in Remixes tab window outlet size is 40mm x 200mm is has the same area as the input…

Print approx. €6.24–€7.62 excl. taxPreliminary estimate for one variant

Downloads
994
Likes
146
Rating
5
P
PrintablesLucky

Grille aération pour tuyau P.V.C 100 mm V3- Ventilation grid for 100 mm P.V.C pipe

Grille aération pour tuyau P.V.C1 00 mm. Diamètre de la grille 93 mm Ext pour vide sanitaire ou autres.

Print approx. €3.08–€3.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
780
Likes
63
Rating
4.67
P
Printablesvoltshep

Combined Magnetic Top Cover Handle with Core ONE+ Ventilation Slide

For use with the original CORE One+ printhead cover right lever. Requires 6.4.0+ firmware. Make sure to flip the vent grille for this to work properly per the CORE One+ update instructions! A drop in replacement for the slide from the…

Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
351
Likes
61
Rating
4.85
P
PrintablesLU_technic

EXTERIOR VENTILATION GRILLE

Ventilation grille 200x200mm for exterior use. Must be print in PETG UV resistent or equivalent. I used this grille to hide a Ø150mm ventilation pipe. I instal an anti-insect mesh between the grille and the wall.

Print approx. €10.38–€12.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
249
Likes
17
Rating
5
P
PrintablesKaktus22

Ventilation grid

Ventilation grid for tube KGEM DN110. Easy aplication. The grid has an additional internal insect screen. I used 3 perimeters.

Print approx. €5.74–€7.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
171
Likes
63
Rating
0
P
PrintablesMorris

Mansions of Madness Ventilation Tile

Model of floor ventilation door. Printed with 0.4 mm nozzle and in 0.15 layer height.

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant

Downloads
146
Likes
36
Rating
5
P
PrintablesJib

Quick Disconnect - Flanged - Duct Adapter for Ventilation

Project Summary: Using this to adapt to a hopper window insert for venting my resin printer in a grow tent. My Print Settings: 20% gyroid infill .2mm height Support from build plate for flange half (connection studs) Printed with PLA

Print approx. €7.11–€8.68 excl. taxPreliminary estimate for one variant

Downloads
131
Likes
32
Rating
0
P
PrintablesFokieH

Prusa MK4 & MK4S Zwangsbelueftung / Forced ventilation

Hier noch eine Zwangsbelüftung für die Elektronik des MK4 / MK4S als Zubehör für mein Druckergehäuse. Die Idee ist die nicht außerhalb platzierbare Elektronik, beim Drucken mit Zusatzheizung im Gehäuse, vor Überhitzung ui schützen. Ihr…

Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
66
Likes
37
Rating
5
P
PrintablesWimHo

Dust filter for the Prusa Core One top ventilation

The filter is 0.4mm thick. You can customize the hole size by changing the infill % of “core_one_filter_C1” in core_one_dust_filter_C1.3mf. Install dust filter between the top panel and the vent cover. used settings; 50% infill % in the…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
61
Likes
14
Rating
4.5
P
PrintablesMonkeyMK

Ventilation Throttle

For this project you need 2 Screw M4x12, 2 pins Ø3x10-20, 1 pin Ø6x90 and 1 hex nut M4

Print approx. €2.41–€2.94 excl. taxPreliminary estimate for one variant

Downloads
61
Likes
20
Rating
0
P
PrintablesFanda

Ventilation Grid 67mm Větrací mřížka

Ventilation grid for SDK hole 68mm with support for print Větrací mřížka pro sádrokarton díra 68mm s podporou pro tisk

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
59
Likes
1
Rating
0
P
Printables3DOM

Dell XPS 9700 (2020) Riser / Ventilation Feet (v3.0)

Introduction Dell XPS 9700 tends to get hot when gaming, wanted some easy to carry feet to improve air circulation when needed. This part elevates the back of the laptop by ~20° I am proud of this simple piece and would appreciate your…

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
11
Rating
4
P
PrintablesDario Mariani

Ventilation grille for doors

Easy to print, any print settings will work fine. Dimensions of the hole to be made on the door: width 180 cm, height 40 cm with an arc radius of 40 cm. Ventilation grille model for 1.8 cm thickness One tip: if you want to apply glue…

Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant

Downloads
55
Likes
6
Rating
5
P
Printablesdjedje_zr7

Peugeot 307 SW ventilation flap repair

Glue the two parts together and replace the old one with the new one.

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
5
Rating
0

Magnetic Quick-Disconnect Ventilation system for Resin 3D Printers V1

UPDATE: There is now an even BETTER version that uses a twist-lock mechanism so you don't have to bother with the magnets: https://makerworld.com/en/models/487870 UPDATE: These files have been superseded by V2!! See update notes below.…

Downloads
3,409
Likes
585
Rating
5
P
PrintablesMukkeNiels

Window ventilation adapter 100mm

Can be used horizontically or vertically. works with 100mm tubes.

Downloads
2,762
Likes
1,274
Rating
5
P
PrintablesStranula

K2 Plus - CFS Riser, Ventilation, and Storage

Update 2025.02.06 Some people have reported that when they printed, the tolerances were too tight for their printer to handle. The original, now called “Tight”, version has tolerances of 0.14 mm. There is now also a “looser” version that…

Downloads
2,755
Likes
371
Rating
5
P
Printablessuperfu5

Toothbrush Case with Ventilation

Toothbrush Case with Ventilation

Downloads
2,454
Likes
366
Rating
4.88
P
PrintablesEdwin Eefting

Fully customizable ventilation grill (with edge)

This Thing is a fully customizable ventilation grill that allows you to construct a wide range of ventilation outlets just by changing some parameters. Use openscad to configure it.

Downloads
2,078
Likes
977
Rating
5
P
PrintablesLuboš Novák

Air conditioner exhaust into the ventilation window

Air conditioner exhaust into the ventilation window. Výdech klimatizace do okna ventilace. Category: Household

Downloads
2,047
Likes
314
Rating
4.83
P
PrintablesBiomech

Beacon Ventilation Knob for Core One

Did you forget to open the ventilation for PLA? Or to close it for ASA? With this handy beacon knob, you can check its status from far away! Printing instructions: 0.2mm STRUCTURAL print settings 3 perimeters base is printed with supports…

Downloads
1,857
Likes
1,348
Rating
4.72
P
PrintablesMarwyn

BambuLab X1/C Ventilation with / without LED - MRW

EDIT ------------------------------------------------------- 2023.08.10. On request from Chris Ondrovic added frame parts without side ventilation (holes only on front side) 2023.03.26. Added STL for Alu profiles caps. Printed from…

Downloads
1,734
Likes
583
Rating
4.9
P
PrintablesBasementLAB

Ventilation Grille / Grid - Collection (rectangular - round) - Griglia di ventilazione misure varie (rettangolare - tonda)

Air Ventilation Grille / Grid - Collection (rectangular - round) - Griglia di ventilazione misure varie (rettangolare - tonda) Dimensional measures: Hex 100mm Ø100mm 100x100mm 100x200mm 100x200mm Vertical (NEW) 125x150mm 150x150mm…

Downloads
1,721
Likes
246
Rating
5
P
PrintablesJan

3D printer ventilation system for window fit to 100mm aluminium hose

Ventilation system for 3D printer. Easy to hook to the top of opened window and connect to 100mm aluminium hose. Works greatly with QIDI plus 4 printer. Suggestion is to remove inside filter in the chamber, connect 100mm aluminium hose to…

Downloads
1,674
Likes
753
Rating
5
P
PrintablesBasementLAB

Grid Rack Panel 1U ventilation panel cover for 10 inch rackmount cabinet

Grid Rack Panel 1U ventilation panel cover for 10" rackmount cabinet - Pannello di ventilazione 1U per armadio rack 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025…

Downloads
1,360
Likes
162
Rating
4.86
P
Printables3D PRINT

Sunlu S2 - pad for better ventilation

Sunlu S2 - pad for better ventilation. Enables faster air removal from your filament dryer.

Downloads
1,337
Likes
142
Rating
5
P
PrintablesMaker Mike

Inline fan for 3D Printer Ventilation - 100mm / 4 inch ducting

This is the next version of 3D printer ventilation I've built for my 3D printer enclosures. The video shows how the ducting, ducting connectors and gates were installed. It also shows how I researched and designed an inline fan using PC…

Downloads
940
Likes
130
Rating
5
P
PrintablesRobertoooo

Compact ventilation for Creality K2 Plus (parametric) (updated!)

This ventilation system was designed with the following priorities in mind: - space saving, you only need about 7cm of space behind the machine - don't interfere with poop chutes which respect airflow, I chose shay's variant also because…

Downloads
916
Likes
152
Rating
5
P
PrintablesMakerMeik

ESP32-Presense - ESP32-Devkit case with ventilation slots

This is a remix of the case from @regularfry . I just added some vents because the ESP32 gets quite warm when running as with the Espresense firmware. Here is the description of @regularfry , which is also true for me: I'm using these…

Downloads
852
Likes
74
Rating
4.88
P
PrintablesFalloue

Elegoo Mars 5 Ultra ventilation system

Ich habe hier einen Abluftadapter konstruiert, der mit einem 60 mm PC Lüfter betrieben wird. Lochabstand vom Lüfter 50x50 mm und Lochabstand zum Gehäuse 65 mm x 65 mm. Abluftanschluss hat einen Durchmesser von 60 mm Bohrungen sind 7 mm…

Downloads
816
Likes
67
Rating
0
P
PrintablesITG Gear

Ventilation size panel for Lenovo M910s/M920s, M720s, M710s

Fixing overheating issues when installing a GPU with a ventilation side panel on the Lenovo M910s, M920s, M720s, and M71 This project introduces a meticulously designed ventilation side panel built specifically for Lenovo M910s, M920s,…

Downloads
800
Likes
40
Rating
0
P
PrintablesIacopani_Motors

Honeycomb Ventilation Grille (150x100, 200x60)

Honeycomb Grilles These are a couple of honeycomb ventilation grilles I designed to create some airflow in the electronics cupboard of my van. They are designed to fit a square hole of size 150 x 100 mm or 200 x 60 mm and are fixed in…

Downloads
795
Likes
83
Rating
4.86
P
PrintablesWiderporst

Cover plate for ventilation slot for "Internorm" window (Lüftungsschlitz-Abdeckplättchen Fenster Internorm)

After 15 years the cover plates of the ventilation slots of our Internorm windows slowly begin to crumble. With this object you can replace the original plates, the outer dimensions are identical. (Nach 15 Jahren beginnen langsam die…

Downloads
761
Likes
122
Rating
5
P
PrintablesPL

Sliding Ventilation Grille

Here is a 3D printable sliding ventilation grille, which is also available in stainless steel. There is also a matching router template to create the perfect cut-out for the grille. Simply screw the template to the desired mounting point,…

Downloads
699
Likes
91
Rating
5
P
Printablesnolibert

Air System / Ventilation - Check Valve / Flap for 100mm / 4inch

Another thing that came out of my ventilation system for my 3d printer setup. I needed a check valve that prevents air from the outside to come in while letting air be pushed through from the inside. I tested some off the shelf stuff but…

Downloads
697
Likes
161
Rating
4.8

Opel COMBO campervan window air ventilation grid

Vent is separated to three parts and they are joined together with M3 screws. As insect protection you can buy cheap insect protection screen, cut it and glue from inner side. For assembly you will need 8pcs of countersunk M3x10 and 8pcs…

Downloads
691
Likes
110
Rating
5
P
PrintablesNathan Nguyen

Elegoo Centauri Carbon Ventilation Exhaust Kit

This is an exhaust kit I designed for the Elegoo Centauri Carbon to exhaust any fumes out when printing parts like ASA, ABS, etc. Included is the following Printer to 4" Duct Adapter Printer Auxillary Exhaust Cover 4" Duct to Fan Adapter…

Downloads
679
Likes
117
Rating
5
P
PrintablesJim

Ventilation grille garage diameter 100mm / Lüftungsgitter Garage Durchmesser 100mm

Ein Ersatzteil, falls das alte brökelig wird und keine Gitter mehr besitzt. Ich habe meines mit einem schwarzen ABS Filament gedruckt, da es besser für outdoor geeignet ist. Veränderungen dürfen gerne vorgenommen werden.

Downloads
637
Likes
51
Rating
4.4
P
PrintablesMarwyn

BambuLab X1/C Ventilation Covers - MRW

EDIT ------------------------------------------------------- 2023.02.08. Added step files for both covers (side, front), without text, logo, motiv… Feel free and make some nice design for your self.…

Downloads
628
Likes
177
Rating
5
P
PrintablesGri

Trichter mit Entlüftung - Funnel with ventilation

Funnel with vent tube so that air can escape from the vessel to be filled when the funnel is fully seated.

Downloads
627
Likes
38
Rating
5
P
PrintablesArkona

Dacia - ventilation

Náhradní klapky, ventilace pro Dacia Dokker. Tisk z PETG. Tisknuto na výšku.

Downloads
620
Likes
51
Rating
4.5
P
PrintablesRYKO

Heizungs- /Lüftungsgitter // Heating/ventilation grille

Heizungs- /Lüftungsgitter – Ventilation Grille Deutsch: Design als Lüftungsgitter für Schreibtische oder Küchenarbeitsplatten wenn der Heizkörper überbaut wurde. Gedruckt in PETG-CF English: Design as a ventilation grille for desks or…

Downloads
604
Likes
34
Rating
5
P
Printablesmakeruniverse

Window adaptor for 100mm ventilation pipe (growtent ventilation)

We needed to get rid of resin smell. Solution: growtent with ventilation setup. Prints without support on prusa xl

Downloads
603
Likes
154
Rating
0
P
PrintablesSnowmix

Ventilation Ø 100mm bend 90/135 degree and 1-to-2 and 1-to-3 V2

Parts for connecting 100m ventilation tubes. 90 and 135 degree bend adn 1 to 2 and 1 to 3 links. Orientation for print will depend on printer and you may have to experiment with support. These can be hard to print without support. See…

Downloads
598
Likes
67
Rating
0
P
PrintablesMushbrandon

Bambu Labs X1 Magnetically Detachable 4 inch Ventilation Ducting Adapter

This adapter features an exhaust interface part that is secured by VHB tape around the exhaust vent on the back of the X1. Fastened on top of it is a TPU gasket part containing magnets. The magnets allow this part to connect with a part…

Downloads
542
Likes
163
Rating
5
P
PrintablesSKT

Window Exhaust Vent | Fume Extractor | Air Intake | AC air conditioner Ventilation | Roto WDC i8

I designed this, in order to extract fumes from soldering and 3D printing directly out of the closest window. For this I use the AC Infinity Cloudline A4 duct fan. The model consists of three parts that can simply be stuck together. The…

Downloads
505
Likes
132
Rating
0
P
PrintablesAgus Brambilla

Magnetic Window Ventilation Duct 150mm 6 inch Hose Connector Prusa Core One || Conducto de ventilación magnético para ventana 150 mm, 6" Conector de manguera Prusa Core One, Creality K1

I needed a system that allows me to quickly connect and disconnect the ventilation duct of my air conditioning to take advantage of the same ventilation duct and occasionally connect my Prusa Core One or my Creality K1C (coming soon) to…

Downloads
502
Likes
40
Rating
0
P
PrintablesSurfalex2000

Prusa Core One Ventilation Knob

Inspired by the Prusa Knob that was showcased on the Formnext 2024, i made a Knob for the Ventilation slots.

Downloads
500
Likes
161
Rating
4.87
P
PrintablesFleeeinIan3D

Prusa Core One Rear Ventilation Mount 3in & 4in Hose 90deg

Why? Using the Core One's rear M3 142x66 bolt pattern, I lofted that profile to a simple cylinder for 3” & 4” hose. I wanted to keep it as tight as possible to the back of the Core One, and point it vertically (90deg). For those of you…

Downloads
493
Likes
137
Rating
4.92
P
Printablesbaszwi00

Ventilation grille (Lüftungsgitter) VW T4

I have replaced the original ventilation grilles with these, as this variant is more space-saving in conjunction with our interior. Since I own a Mini+, I have divided the model into two parts. PLA works fine for me. No support.

Downloads
475
Likes
35
Rating
5
P
PrintablesMarc

VW T5 ventilation

2026 09 25 I have created a new version, this time as a paid model. I appreciate your support! IMPORTANT: Before printing, check with the laminator preview that the grid is correct. 2026-05-20 For the BAMBU ecosystem, click on the link:…

Downloads
472
Likes
26
Rating
5
P

Ventilation Grill 100mm x 100mm

This thing was designed for use in the forepeak of my power boat. It can have many other uses regarding ventilation, ex. cover up of vent/fan holes. My use for this item is to cover 2x vent holes in the forepeak on my boat wich was made…

Downloads
472
Likes
35
Rating
5
P
PrintablesBasementLAB

Ventilation Grille - Duct Cover 105x105mm / 105x210mm / 210x210mm / 210x105mm / Ø105mm - Griglia ventilazione a bocca di lupo

Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…

Downloads
472
Likes
92
Rating
5
P
PrintablesAdam L

Basic Raspberry Pi 5 Ventilation and Blank Cases

Change log: 10/18/2023 : Corrected a mistake I made in a vent extrusion cutting too far. Updated to v11. Please re-download the fixed versions if you had the previous one. Sorry about the mistake! A set of straightforward everyday cases…

Downloads
467
Likes
24
Rating
4.5
P
Printableskinos1

Creality K1 y K1C Elevación de tapa con bisagras y ventilación adicional con corredera. Hinged cover lift and additional ventilation

Elevación con ventilaciones para la K1 con bisagras 9/5/24 Se añadió la parte trasera de la K1, va justo para que no se levante por el movimiento del teflón Para hacer la elevación completa como en la imagen se necesita imprimir : 1…

Downloads
461
Likes
56
Rating
5
P
PrintablesJamie Claye

V2 - 22mm One Way Flow Restriction Valve for Multiple Patient Lung Ventilation

With these designs, I'm assuming the ventilation flow with the valves in place is sufficient and not too restricted. Rev 2 goes way from the single object print and the valve floats a little better in the chamber resulting in a better…

Downloads
459
Likes
41
Rating
5
P
PrintablesPassforce

Ventilation grid

Ventilation grid Size of 190*80mm

Downloads
459
Likes
51
Rating
0
P
Printablesmatej

Air Ventilation Check Valve / Zpětná klapka do ventilace 125mm

Printed from PET-G due to higher strength and UV protection. Use string of filament as the rotation axis of the flap. fasten ends in prepared holes with a soldering iron. Jako osa otáčení je použit kus filamentu. Konce jsou roztaveny…

Downloads
447
Likes
79
Rating
5
P
Printables3DPrintBurgas

Bambu Lab X1, P1P, and P1S LED lighting with hidden Ventilation Top Glass Riser

I've tried one or two models, but there were some overhangs and design issues, so I decided to come out with my design. Ventilation openings have cover walls in front of them and light does not leak out. Print without supports, 0.24mm, PETG

Downloads
436
Likes
55
Rating
4.83
P
PrintablesPetr Fojt

Skoda Octavia 2 - ventilation repair - oprava ventilace

Oprava poškozených lamel u zadní ventilace Škoda Octavia 2 Po drobných úpravách pravděpodobně i pro další vozy. V případě zájmu upravím potřebné modely. EN: After minor adjustments, probably also for other cars. If interested, I will…

Downloads
428
Likes
105
Rating
5
P
Printablesslunicko_ondra

Tailgate Ventilation Lock

A simple bracket in three different sizes allows you to let the tailgate slightly open for fresh air while you sleep in the car. Moreover, the vehicle can be locked when the bracket is installed. Features Lock your car while keeping the…

Downloads
415
Likes
154
Rating
5
P
PrintablesNikoFly

Adjustable ventilation grid - grille de soufflerie réglable

Here is an adjustable blower or ventilation grille, I designed it for a chicken coop, but you can use it for other applications, hole diameter Ø65mm and M6 screw preferably with a lock nut. Enjoy ;-)

Downloads
411
Likes
50
Rating
5

Ventilation grille 120mm built-in (Griglia di Ventilazione)

Ventilation grille 120mm built-in I created a ventilation grille to replace some old damaged grids. Conical joint. Print Info Without supports. layer: 0.2mm infill: 15-20% material: PETG or ABS for better outdoor strength maybe ASA would…

Downloads
408
Likes
55
Rating
5
P
PrintablesSpeedy

QIDI Q1 Pro Simply ventilation

- Simple ventilation when printing, e.g. PLA, etc. - Filament overheating protection. - The lid rises by 100mm. - Use a piece of filament to connect part. - Attached with Double-sided adhesive tape. - When folded, the holder is clicked…

Downloads
402
Likes
77
Rating
5
P
PrintablesMarkuspwn

Core One Ventilation Exhaust 4" Duct

I want to ideally have an exhaust vent setup for the core one so here is a quick model I made to achieve this.

Downloads
399
Likes
111
Rating
4.83
P
PrintablesCeleste

Sturdy blank 1U ventilation panel for 10 inch rack

------------------------------------------------------------------------------------------------- UPGRADED PARTS INCOMING! I've done my own fair share of testing with this part, and I figured a major redesign might improve it a lot:…

Downloads
395
Likes
43
Rating
5
P
Printablessabin

Adjustable ventilation grill air difuser

This is ventilation air-intake adjustable grill, with uniform air difuser at ceiling level. It is built for pipes with exterior dimension of (usually) 125mm and interior of 117mm. Screw is 5cm height. Part 2 needs to be 3D-printed with…

Downloads
393
Likes
58
Rating
0
P
PrintablesAkeno

Air grille / Ventilation grille Voronoi effect

Air grille / Ventilation grille Voronoi effect x y z 120,00 80,00 7,00 mm Additional notes If you like this design, please give me a like and post makes.

Downloads
385
Likes
38
Rating
0
P
PrintablesRayn

modular window ventilation

modular window ventilation (to vent room or extract air from printer enclosure) Upd : new version of "classic" window vent with wind / flow regulation (limiter or plastic sheet)

Downloads
382
Likes
53
Rating
0
P
PrintablesDsema

Original Prusa Enclosure - Magnetic Ventilation System

I have the honor to introduce you… Original Prusa Enclosure - Magnetic Ventilation System Tired of toxic gases? Who says that the Original Prusa Enclosure is only for fdm printing? With this mod you will be able to print with resin…

Downloads
373
Likes
281
Rating
5
P
Printablesblaxcan

Ventilation Cover / Grille 280 × 220 mm

This is a ventilation cover/grille designed for air inlets, outlets, ventilation openings or similar technical applications. The outer size is 280 × 220 mm . The model includes two frame-height variants: 8 mm and 12 mm . The lower mesh…

Downloads
362
Likes
218
Rating
0
P
PrintablesBas

Anti Ventilation / Cavitation Plate for ePropulsion Spirit

My Spirit XS shaft outboard works great but sometime sucks in air from the surface leading to ventilation/cavitation and power loss, especially in reverse. This plate fixes that. Should fit both the Spirit 1.0 and 1.0 plus as they have…

Downloads
360
Likes
14
Rating
5
P
PrintablesFiewo

VW Golf 5 ventilation instrument mount

Instrument holder for a boost pressure display. printed with tree supports in 0.2mm and 100 infill. Mount for a boost pressure gauge with 52mm diameter. The design is not mine and was only adapted for the diameter of the boost pressure…

Downloads
352
Likes
42
Rating
5
P
PrintablesSnowmix

Ventilation 110x55mm to 100mm Ø 90 Degree Bend V2.

NEW Version. Cosmetic cleanup and slightly better modelled. Conic fit for Ø 100mm duct. This is parts for ventilation fitting 110x55mm rectangle ventilation duct to 100mm Ø duct. Orientation for print will depend on printer and you may…

Downloads
350
Likes
50
Rating
5
P
Printablesfred-o-matic

Ventilation Grille

Ventilation grille, e.g. for a tool shed, to prevent high humidity. Use 2 per room. One at ceiling height, one at foot level. I glued it into a rectangular cut-out and used netting to keep the insects out.

Downloads
346
Likes
23
Rating
5
P
PrintablesDruckbar

Lenovo ThinkCentre M920q/M720q + AsRock RX 6400 Mounting Bracket and Ventilation

Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…

Downloads
339
Likes
23
Rating
0
P
PrintablesMikoCZ

Ventilation grid KG 125

Ventilation grid for KG pipe 125mm. Printed with PETG infill 20% 3 perimets The grid diameter for the KG125 pipe is 117.5 mm

Downloads
324
Likes
56
Rating
5
P
Printablesmuddymaker

Prusa MK4/MK3.9 Love Board Cover With Ventilation Grill/LED Visualiser

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Prusa MK4/MK3.9 love board cover with ventilation grill/LED…

Downloads
321
Likes
90
Rating
4.94
P
PrintablesJulek

Aircon exhaust ventilation grille

Ventilation grille for a wall mounted hot air exhaust with 120 mm diameter. You can print the cutout template to get the correct hole size with a Dremel.

Downloads
319
Likes
46
Rating
5
P
PrintablesElectric Fjord

Carvera Air Ventilation Vacuum Adapter

This is a mounting plate for the back of the Carvera Air. It converts it to a 32mm out. There is also a few adapter for my Vacuum. https://buymeacoffee.com/ElectricFjord I show it in my video:

Downloads
317
Likes
32
Rating
5
P
PrintablesRaQic

Funnel - with ventilation

Filling the bottles has never been easier ;)

Downloads
314
Likes
26
Rating
5
P
PrintablesRadek Podolský

Octavia 1 Ventilation

Ventilation Octavia 1

Downloads
314
Likes
46
Rating
0
P
PrintablesInfectedByMax

Xtool F2 Ultra 90 degree Ventilation adapter

Xtool F2 Ultra 90 degree Ventilation adapter, used on the back side fan outlet

Downloads
298
Likes
23
Rating
0
P
PrintablesTeaBavaria

Ecoflow Wave 2 Hose Connectors and Ventilation Grill

Hose connectors for 120mm and 150mm hose to be screwed on, as well as a ventilation grille for both hose connector sizes. Any part can be printed without support. Hint for ventilation grille: Make sure to pause the print to insert nuts…

Downloads
293
Likes
15
Rating
4
P
Printables3D Sourcerer

4-inch HEPA Air Filter Attachment & Ventilation Duct Adapter for Universal 3D Printer Enclosure by 3D Sourcerer

The file is designed to be used with our 120mm Fan Mount and will replace a Top Corner piece in the desired location. The preferred printing orientation is with the circular duct on the build plate (see images). Compatible HEPA Air Filter…

Downloads
293
Likes
52
Rating
5
P
PrintablesHD_Creator

Ball joint (18mm) to Audi ventilation adapter

Application Connect this adapter to your car vent outlet. It is sized for and extensively tested on an Audi Q5. It might fit out-of-the-box for other car models as well. I am totally willing to adapt it for other cars, if you let me know…

Downloads
292
Likes
49
Rating
5
P
Printablesdesertfox292

Xbox One Wall mount with ventilation 2 screw

This is a remix of the mount done by MarMed but I made a honey comb/hex mesh pattern in TinkerCad that I have added to the top mount in order to minimize vent blockage. The top mount is basically just keeping the Xbox from tipping and not…

Downloads
292
Likes
25
Rating
5
P
PrintablesRoland Goller

Case Fan 120mm for Prusa Enclosure with Automatic Ventilation Flaps for Top Assembly and Exhaust Filter

Case Fan 120mm for Prusa Enclosure with Automatic Ventilation Flaps for Top Assembly and Exhaust Filter 08.16.2023 22:00 Update for the Screw Holes 4 x Screws M3x8mm for the Flaps 8 x Fanscrew A FAN WITH A HIGH AIR FLOW RATE IS REQUIRED,…

Downloads
291
Likes
101
Rating
0
P
Printablesbarebone

k2 plus ventilation

I wanted to create a ventilation system that goes straight up and doesn’t require any modifications to the printer. Everything attaches to the printer using magnets. If I move the printer, I want to be able to disconnect the ventilation…

Downloads
288
Likes
61
Rating
5
P
PrintablesDeeds VP

Bambu P1S/P1P/X1C Low profile Riser with ventilation and lighting

This is a remix of the riser design by @dkarjadi_251732. Mostly cosmetic changes to suit my use case.

Downloads
288
Likes
63
Rating
4.8
P
Printablesalekbielin

Centauri Carbon ventilation outlet

I've made a version with a port for ventilation system for Elegoo Centauri Carbon printers which are placed next to the wall and therefore need an outlet at a 90* angle. Vent hose is 82 mm in diamiter which you can easily find at…

Downloads
287
Likes
58
Rating
2
P
PrintablesEsen Baytekin

Elegoo Saturn 4/4Ultra Ventilation Flange and fan Bracket

Elegoo Saturn 4/4 Ultra Ventilation Flange and Fan Bracket In poorly ventilated areas, resin can become unpleasant and unhealthy. This model allows you to attach a 60x60 fan to the accessory port and quickly vent fumes using a 50mm…

Downloads
282
Likes
32
Rating
0
P
PrintablesBRIM

Air Ventilation Grill with mosquito stop

Air Ventilation Grill for vent tube 120mm diameter. Grill diamter 118mm, mounting ring for installing e seperate mosquito net. Works without mosquito net. Non printed, textile Mosquite net with diameter 150mm to be installed if required.…

Downloads
274
Likes
63
Rating
4.67
P
Printables3D Print Fun

AMS Spool Weight with ventilation holes for Silica Dessicant Filling

Added a bunch of 2mm ventilation holes for the tube to be filled with Silica Dessicant. Kind of adding an extra function to the thing printed in PETG (if you want to dry the hole spool centre in a filament dryer, if not PLA is enough.…

Downloads
273
Likes
31
Rating
5
P
PrintablesAlex
Downloads
273
Likes
122
Rating
5
P
PrintablesHeuschnupfer123

VW T7 Multivan Ventilation-Grille-Window-Adapter

As we would like to go to camping and sleep in our T7 Multivan (2023), we just needed something for the ventilation… Some kind of window adapter… So this is the result of our idea and my first own design This ventilation grille is…

Downloads
266
Likes
34
Rating
4
P
PrintablesCeleste

Celeste's sturdy 10 inch rack blank panel V.2 (ventilation, no fan)

Description This is one of my extra sturdy 10" rack panels, which I originally developed to fit my needs while designing (mobile) racks for my homelab, RF applications, wardriving and education. This is a simple blank panel with hexagonal…

Downloads
264
Likes
20
Rating
5