1 / 3
Honeycomb Ventilation Grille (150x100, 200x60) — image 1
1 / 3

Honeycomb Ventilation Grille (150x100, 200x60)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These are honeycomb ventilation grilles I designed to create airflow in the electrics cupboard of my van.

Rating
4.857 / 5
Likes
83
Downloads
795
Makes
8
Views
2,535
Reviews
7

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

Honeycomb Grilles

These are a couple of honeycomb ventilation grilles I designed to create some airflow in the electronics cupboard of my van.

They are designed to fit a square hole of size 

150 x 100 mm or 200 x 60 mm and are fixed in place with 4 3.5 mm wood screws.

Print settings

Flip the model so that the larger part touches the bed. You won't need supports and the parts are a straight fit after print.

Depending on the use (e.g. for outdoor use or inside a car) you should consider using PETG. I printed them in PLA+ and they are holding up well after a few months.

Not the right dimension?

Got your back, brah!

You will find the Solidworks designs in the Files. Feel free to modify as needed.

Don't have Solidworks? Shoot me a message andI can modify it as needed and provide you with the STL.

Find the design useful?

Consider offering me a beer. Beer fuels creativity and creativity creates good STLs :-)

 

https://www.paypal.com/donate/?hosted_button_id=ARK54C7FNUYC8

Tags