Honeycomb Ventilation Grille (150x100, 200x60)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are honeycomb ventilation grilles I designed to create airflow in the electrics cupboard of my van.
- Ocena
- 4,857 / 5
- Polubienia
- 83
- Pobrania
- 795
- Wydruki
- 8
- Wyświetlenia
- 2535
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Honeycomb Grilles
These are a couple of honeycomb ventilation grilles I designed to create some airflow in the electronics cupboard of my van.
They are designed to fit a square hole of size
150 x 100 mm or 200 x 60 mm and are fixed in place with 4 3.5 mm wood screws.
Print settings
Flip the model so that the larger part touches the bed. You won't need supports and the parts are a straight fit after print.
Depending on the use (e.g. for outdoor use or inside a car) you should consider using PETG. I printed them in PLA+ and they are holding up well after a few months.
Not the right dimension?
Got your back, brah!
You will find the Solidworks designs in the Files. Feel free to modify as needed.
Don't have Solidworks? Shoot me a message andI can modify it as needed and provide you with the STL.
Find the design useful?
Consider offering me a beer. Beer fuels creativity and creativity creates good STLs :-)
https://www.paypal.com/donate/?hosted_button_id=ARK54C7FNUYC8
