779 models
This holder is clamped onto the sun visor of the car, or onto your shower cabin door. It reliably holds a pair of glasses without interfering. So the sunglasses are easily at hand when you need them. Easy to print with standard…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Quick and easy Visor Sharpie/Pen universal clip. Great for field workers who need to scribble quick notes occasionally, and can't get caught without a pen! Printed in Prusament PETG.
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
This sunshade is compatible with the original BMW Motorrad smartphone holder "Connected Ride Cradle". Unfortunately, there is no sunshade for the cradle from BMW, so I made one myself. Mounting Instructions: unscrew the screw at the…
Print approx. €7.46–€9.12 excl. taxPreliminary estimate for PETGSource material: PET
Designed up this hook beacuse the original one snapped off. The model you see printed in the picture has been printed at draft resolution of 0.25 You can slice it and print it at at higher quality. Supports are needed and you should print…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
This is a replacement visor clip for a 2022 Audi A5 Quattro. It's possible that it might also work for other models or other model years. However, the only vehicle this has been tested on is the 2022 Audi A5 Quattro. Materials required In…
Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant
This two-piece phone holder securely attaches to your car’s sun visor, providing a convenient hands-free solution for navigation, calls, or media control. Designed for easy assembly, it offers a snug fit while keeping your phone…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
A clip for your visor that fits the Chamberlain (liftmaster) garage door remote. 2 sizes here for thick and thin visors Print in PET-G as PLA will likely soften in the heat inside car. Support is required. Sliced versions for both the…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Clona (kšilt) na svítilnu Fenix BC26R pomáha snížit oslnění účastníků provozu v protisměru. Doplnil jsem i logo firmy Fenix, které lze v projektu odstranit. Model je prototyp, který bude teprve testován v terénu. Doplňující clonu…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
It fits over the original rubber holder and prevents a dropping of the sun visor in case of a worn out rubber mount. It can easily be mounted and so there is no risk of braking the glass during remove of the rivets. Just put it over the…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Hello :) Made this one today, as training :) Works okay, printed in cheap white PETg. From my experience it should last, otherwise ill print with something better for heat. Printed laying on one side with supports for sticking parts, 5…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Visor for the IMOU 2C camera. This visor is designed to leave the entire field of view of the 2.8mm IMOU 2C camera unobstructed, therefore it does not obstruct any other model. It may also be compatible with the 2E and 3C series cameras…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
Protective face shield / visor for brush cutter, garden, mechanics
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for PETGSource material: PET
Modified the v2.2 visor so it can stack 10 high, will fit on the prusa bed twice so can do 20 in 24hrs at .2 layer height. Included the Gcode and .3mf file. the 3mf file can be imported directly to PrusaSlicer and has all the print…
Print approx. €24.50–€29.94 excl. taxPreliminary estimate for one variant
Use 4 walls + PETG. A simple clip designed for holding sunglasses or prescription glasses on a car sun visor. The clip attaches to the visor and keeps glasses easily accessible while driving, helping reduce clutter and prevent glasses…
Simple sunglasses holder for sunvisor in car, printed with The Filament HT-PLA to prevent deformation in the sun.
clip for attachment of the Ooono Co-Driver to your car's sun visor
A motorcycle or racing helmet with optional visor. The visor can be opened or closed. You should be able to print the helmet without support if your bridges are good. It might need a little post processing if you get sagging filament on…
I wanted to make a TNG VISOR prop with an easy-to-print one-piece grill instead of installing a lot of rods. This has a flexible grill that prints flat and fits nicely in grooves to secure it. This makes painting easy but also lets you…
This is an updated version of my older visor. Sleeker, and more akin to the 90s television show
Print settings: No brim Print solid Print in preset orientation
Updated so the visor section is separate from the helmet. Haven't cut up into smaller pieces but it isn't too hard to do so within a program of your choice such as Microsoft 3dbuilder Maybe if you enjoy my work to make this remix you…
Check out the full tutorial on my Youtube page! This is a remixed version of Killonious' model (which was based on the helmet by Jace1969). The changes I made: Added the lamp holes Added the 3mm LED fixtures (to be printed out of…
Zyn Holster for your sun visor. I printed in PCTG but PETG or other filaments that withstand higher temps should work for higher summer time temperatures.
Take off the useless sunvisor, use this to fill the hole! Uses the factory screws. 1990 - 2005 Miata / MX-5 Print it in PETG, ABS, or ASA. Do not use PLA for this, especially in warm climates. Enjoy! Check out my webstore:…
Recommended to print this model with PETG, ABS, or ASA. Any rigid temperature-resistant filament will work best.
Holds zyn pack out of the cupholder I suggest support for main part but a support blocker for the void where the visor clip presses in. Used these visor clips: https://www.amazon.com/dp/B0CPLVRQ34?ref=ppx_yo2ov_dt_b_fed_asin_title
I don't really like the glare from the backlight on the camera of my Q1 pro. Therefore, such a light-proof visor was made. It doesn't stick out much, it's hard to touch, it doesn't obscure the image much -it works.
Stick your glasses to the sun visor of your Mini
commercial use This model is not released for commercial use. If you want to sell products related to this model, commercial licenses are available via direct message. description a printed case with a integrated belt clip for a motorola…
This is a visor inspired by Cyclops's visor in the X-Men comics. It wraps around the face and there are supports to help it rest on your ears. This was made to match my face so you may need to make adjustments to fit your own face as…
Remix of a remix. Original model by Kolinc. Visorless model by PJJGaming. I split the visorless model into pieces for printing. I am printing this as we speak so I may have to update the files. Update 2: Smaller split, added more split…
🎁 Get $100(s) in Rivian Rewards points and 3 months free RAN charging by using my referral code TODD11893313 when 🛒 ordering a Rivian . Sunglasses Hooks After remixing an air vent hook for water bottles , I thought that we should have a…
holder to keep your can on the sun visor.
Reposted this 'cause it looks super freaking awesome, and because I realized there are no K6-3 helmets for dummy 13 on Printables. I mean, how? It's such an iconic piece of armor and no one made one for the dummy 13. The helmet that makes…
Visor Prop StarTrek Geordi Laforge Use 2 pieces 2 by 10 mm cylindrical magnets
Never got a clip for the garage door remote when I moved in so I made my own. Three sizes available for different visor thicknesses. Small = 5 mm gap Medium = 8 mm gap Large = 14.5 mm gap Update (11/5/21) : Revised to version 2, which…
I designed this to replace the clip in my car that started to fall apart. This design is split into 3 components: Locking Sunglasses Holder Sun Visor Clip (3 optional sizes). I recommend not using PLA as it will likely warp in on a warm…
Printing in PETG at 100% infill and heating up the clip to bend it fully closed wasn't enough to make the clip hold onto the visor as the heat expanded it the width of the visor. I added teeth to help the clip grip the visor after it…
Print Settings: 0.2mm layer height 3 walls/perimeters 100% infill (thin model so not really relevant) No supports needed - reorientation if slicer shows supports PLA, PETG, CF/Nylon, CF/PLA, PETG or CF/PETG etc.. STL's: Sun visor clip -…
This model is compatible with the lego system.
This model is compatible with the lego system.
10% infill Print with support Please upload your makes and comments and thank you for your support
This is a Miata Visor Delete Plate with angled GoPro mount (to allow the GoPro to sit flat). This will fit NA and NB Miatas (1990-2005). I recommend printing in PETG or ABS. PLA will not last in a hot car and may melt or become tacky This…
A cover that I designed for the clip that can hold a GoPro for the DJI RC2. Doesn't require supports. I posted a picture on how it should be printed. It can work as a sun visor but will also protect the screen when not used. This is the…
A sun visor clip for the OOONO CO-DRIVER NO2, based on my design for the CO-DRIVER NO1. This clip secures the CO-DRIVER NO2 with a friction-locking case. Additionally, it is designed to enable charging of the CO-DRIVER while it remains in…
A sunvisor clip for the OOONO CO-DRIVER NO1. Inspired by @nyknyc 's design . It secures the CO-DRIVER NO1 with a friction locking case. Printing Instructions: I printed both parts out of PLA (Maybe use something more heat resistant…
I created a tube that fits more snugly than others I've seen on here. I increased the diameter of the outer tube to snap into the visor clip tight and won't slip out when it gets warm like the rubber tubes you find on Amazon. I printed…
This model is compatible with the lego system.
Inspired by Twitter/X user @Haltor, this clip simplifies using a hat brim to support the weight of an apple vision pro. Fit is intentionally tight on the hat brim. May loosen in future version.
Printed with 0.2 mm nozzle, 0.08 mm resolution. Support everywhere. Two holes for steel pins added for better rigidity of clip, pins additionally glued with epoxy. Enjoy. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts:…
Pretty straight forward, fits a Jeep JL ‘18-’24 Visor for mounting your sunglasses. I printed with PETG and with 5 perimeter's, 90% infill to achieve a solid part. You could go less but i did not feel like testing limitations at this…
The clip on my Skoda Fabia has broken for the second time. I drive on a route where the sun often hits from the side/front. The cover, metal clip, and screws are reused from the original. The model requires a support structure and should…
Clip-on tissue dispenser for easy one-handed use. Haven't we all needed a paper handkerchief, while driving? Then you try to fumble the box of tissues out of your pocket, and then pull a single tissue out of the taped foil package. You…
Visor For Lowrange Elite FS 9inch Fish Finder. Daylight cover. For better viewing. Also in the rain. I Printed this with PETG Black. On the back, No support needed. Width 60mm, 3.2mmThick, 2x100gr, 3 bolts M3x15, 3 nuts M3 Width 80mm,…
Sun Visor for Lowrance Eagle 9 Fish Finder Sonar
Sun visor clip for a 2010 Hyundai i20. Will probably fit other models but I have no idea. I believe this to be to part number: GETZ 8523505100OM 85235-05100OM Best to print in PETG, ABS or ASA for heat resistance. A car's interior can get…
This model is compatible with the lego system.
Sun Visor Extender Tame the sunrise and sunset sun rays that escape your normal sun visor. Features Easy to use and adjust Goes together in seconds. Fits most visors Can be easily switched to the visor of the passenger side. Or print 2!…
Removed those useless sun visors? This model is an easy-to-print block-off plate that fits Mk1 and Mk2 MX5/ NA and NB Miata. It uses the stock hardware to install and only takes 2 minutes. The models in the pictures are printed with a…
This model can be printed on its side for minimal support usage. This print can save you from having to buy the overpriced version of this from a convenience store when all you need is a place to put your sunglasses where they are easily…
Keep your sunglasses tidy with this nice looking visor clip!
I got tired hearing my wife's (and son's) chapstick/lip balm rolling around in my center console. Of course, I had to 3d print a solution. Should fit most visors (tested and fits on two different Ram model years, two different Jeep…
This design supports 3-hole punch system for use with sheets. Visor features covered top and tight tension across 8.5x11in sheet. Tested shield clearance with safety goggles and face mask. Full 8.5x11in sheet is used with exception of…
Hi Yamoko, I did what I could so hopefully it will work for your project. I down loaded Killonious's Phase 1 helmet and made it to fit that https://www.thingiverse.com/thing:3486066 I also included an adaption to fit My Captain Rex Suit :…
I didn't want to stick the OOONO in the car with double-sided tape. That's why I drew a clip for the sunvisor with and without car brands. The advantage of this postion is when the OOONO is directly at head height you don't miss the alarm…
The sun visor clip is a small but essential accessory designed for cars. It serves the purpose of securely attaching the sun visor to the vehicle's ceiling. This simple yet effective device ensures that the sun visor remains in place,…
This model is compatible with the lego system.
Print a cheap replacement for OEM E46 sun visor clips. I recommend printing at 100% infill to prevent splitting at layers when installed. I had good success with a 98A TPU filament at 100% infill with supports on. Just give extra support…
🚗 MOLLE Sun Visor Panel (Multi-Size Variants | No Supports) A compact and practical MOLLE-compatible panel designed to mount on a car sun visor, allowing you to organize and attach essential tools, cables, or documents within easy reach.…
In my Ford Focus MK1, the sun visor retainer has aged and fallen out. I can't find anything similar here, so I designed one. It fits tight, doesn't sag. I've printed from PLA, but maybe something softer, more flexible material would be…
This model is compatible with the lego system.
This model is compatible with the lego system.
Print settings used: Elegoo Neptune 2s printed at .12mm printed vertically with supports to minimize layer lines. Assembly: I fit the visor where I liked and drilled the two center holes through the visor and into the body. I then used…
This is a remix of Celta's sunglasses clip. Original didn't fit my Maui Jim's causing them to fall down - so I made some changes. It is more flexible and widened to 35mm instead of original 25mm. It is not a tight as the original…
The purpose of this mount is to allow the Ezpass to mount to any sun visor and easily switch it to any car. No need to have additional velcro or buy suctions cup mounts. Simply install the adhesive velcro that comes with the ezpass or any…
Summary Opel (Vauxhall) Corsa B - Sun visor hook. Because all corsa have broken visor hook :D Instructions just printed in lulzbot AO-100 (mendelMax) without support with 0.4 layer height. Worked without any adjustments
My Chevy (Volt plug-in hybrid) has done me proud over the 9+ years of service, but it is starting to show signs of age. One of the little things that broke was my sun visor clip, so the visor swings back and forth depending on whether I'm…
Simple clamp to mount your OOONO 2 to the sunvisor in the car
The clip (1Z0857561) for my sun visor in Skoda Octavia 1Z broke and I wasn't able to find a matching replacement part online. Luckily there is already a fitting model on on Thingiverse but it is slightly higher than my original part. The…
If you wear glasses (or sunglasses) and shoot photos outdoor with a DSLR, you must have been annoyed by how sunlight from atop blinds you when you are looking through the viewfinder. No viewfinder-mounted visor can solve the problem…
Motorcycle Helmet Keychain – Solid & Moving Visor Versions 🏍🔑 Add some biker flair to your everyday carry with this detailed 3D model of a motorcycle helmet keychain! Download The HelmetHook Here This design includes two versions: Solid…
This is a mount for a car sun visor I made to replace the factory one which broke. It fits a 2008 Subaru Impreza but I suspect that many other Subaru's probably use the same piece, so if your mount broke, like mine did, then I would…
My wife drives a Subaru Impreza and her passenger sun visor broke one day. Turns out a plastic connector piece broke roughly in half. Unfortunately you can't buy just the one piece that broke, you have to spend $90 to buy a whole new…
Subaru Cross trek, Impreza, Forrester Sun Visor part that holds the actual visor in place. Just a replacement for the OEM one. It uses the same exact screws that are in already in the car. Printed in ASA and ABS with the flat bottom side…
Parental Advisory Explicit Content logo in 3D. 5mm high.
This model is compatible with the lego system.
I printed it 98% so it pressfits into position. Vary depending on the tolerances of your printer which is surely better than mine. Stampato in scala 98% cosi che si incastri perfettamente a pressione, vedete voi in base alle tolleranze…
Sun visor clip for when you evidently break yours. Will fit 2008 model, and possibly more. Print with ABS or other strong and heat resistant polymer. UV degradation shouldn't be a concern. Print with dense infill since it needs to flex…
Printed with 0,2 mm Layers Just 70 Gramms
This is a replacement clip for a Ford F-150 sun visor. My dad's broke so I modeled up a replacement. It broke in the winter, so I printed the version one in PLA as it was cold enough outside that it wouldn't melt. When summer came, I…
This is a low profile under the visor GoPro mount for the TLD Stage helmet. It is best used with a small camera or light. Attach with high strength double sided tape. Parts List M5x.08 Cap Nut ( https://amzn.to/3P8OOzW )
EN: Prusa Protective Face Shield punching and rounding template for visor. It is based on the dimensions given here:…
If you are looking for a visor clip for your sunglasses for visors that are thicker than most, does not let your sunglasses wobble, prints quickly without complicated gripper teeth (that can cause pilling), and with 30% infill has good…
Replacement part for Hyundai Getz sun visor clip. Re-designed the small clip that broke with a sturdier design.
Simple visor for freestyle helmet from "Just Why Design". It is sticked by double sided sticky tape. It can be easily resized for ladies/kids helmets. I tested it for a kids M sized helmet and it works on 88% of original size. Print…
Intro: This part is for the older opel astra models and it's the holder of the sun visor. After a few years they tend to break. I replaced this part for a friend. I reduced only one detail, because it was not necessary and not easy to…
Available for free is the latest 50/50 astronaut & skull twist fidgets with the full skull & full helmet available to all subscribers or on any online store The skull is made using separate subtools making it super easy to paint and…
Print it with supports on the builtplate. Use more heat resistant filaments like PETG of ASA.
