Search results: wade

Sort order

Counting matching models…

P
PrintablesVanessaE

Greg's B'Wadestruder / geared B'struder (bowden-feed extruder), v3

This project is an elegant geared-drive, bowden feed extruder, based on tempo502's B'struder. It combines the idler arm from there for PC4-M6 pneumatic/bowden fittings, with your basic Wade gears. With a suitably-modified idler arm, it…

Downloads
542
Likes
29
Rating
0
P
PrintablesModel Magic

Saving Private Ryan - T4 Medic Irwin Wade - 1998

Saving Private Ryan - T4 Medic Irwin Wade - 1998

Downloads
138
Likes
18
Rating
0
P
PrintablesPiercet

Lulzbot Extruder Beefy Idler Block for Greg/Wade style extruders - Heatset Insert Edition

Here This is based off the latest 0.4 Beefy lulzbot Idler variant (which compared to 1.4c is basically 2.0 anyways), licensing is Creative Commons Open Source Attribution as usual. Please feel free to use this part in any manner you see…

Downloads
105
Likes
1
Rating
0
P
Printablesxanatorium

Wader push clip replacement

I needed a replacement for push clip on a Wader garbage Truck so I made one. Print Settings Printer: Geeetech A10T Rafts: No Supports: No Resolution: 0.12 Infill: 80% Filament: Geetech PLA Red The clip after fit inside before Category:…

Downloads
97
Likes
8
Rating
0
P
PrintablesFatmann Makes

M8 spacers for Greg Wade extruder

used for shimming extruder. there are some friction forces here so I print in a higher temp filament (abs).

Downloads
85
Likes
3
Rating
5
P
PrintablesBooster
Downloads
82
Likes
10
Rating
0
P
PrintablesPali

Low poly Dart Wader remix

This is a simple quick remix of Low poly Dart Wader from CalebTimoteo see: https://www.printables.com/model/553476-darth You have two options: 1: print the original model and print separately the insert cup then glue or just leave as is…

Downloads
70
Likes
15
Rating
5
P
PrintablesModel Magic

Road House - Wade Garret - 1989

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
59
Likes
11
Rating
0
P
Printables3DCustomPrint

coffee Stencil - Autobot Logo or upside down Darthwader

coffee Stencil - Autobot Logo or upside down Darthwader Category: Kitchen & Dining

Downloads
52
Likes
8
Rating
0
P
PrintablesAndy Forsberg

Greg's Wade Accessible Belt Drive Extruder

**I just uploaded a newer version of this design please check it out first: http://www.thingiverse.com/thing:456025 This is a mash-up of the Greg's Wade extruder and Terawatt Industry's belt drive extruder. It brings the zero backlash…

Downloads
45
Likes
7
Rating
0
P
PrintablesSimo Apell

Greg's Wade's Accessible Extruder with 5mm output gear axle

This is a remix of Tick007's GWAE to eliminate the need for the 'M8_nut_adapter' This thing includes only the body and the large gear, get the other parts from the original thing. The body needs two 625 bearings and the gear has a pocket…

Downloads
42
Likes
8
Rating
0
P
PrintablesPiercet

Lulzbot Extruder Idler Block for Greg/Wade style extruders - Heatset Insert Edition

I really like the greg/wade style extruders overall, and the lulzbot variant is the best one out there of that type. That being said, I hate, loath and otherwise utterly dispise the stupid idler arm itself for one reason. Every time I…

Downloads
37
Likes
1
Rating
0
P
PrintablesGrafguenter

Wappen des 7. Schnellboot-Geschwader

Wappen des 7. Schnellboot-Geschwader

Downloads
36
Likes
0
Rating
0
P
PrintablesOrigamigreg

Wade & Elvis

Deadpool and the King of Rock and Roll. Multi Layer Print Printed at 0.2mm Layers. Use Arachne or enable “Print Thin Walls” 0.0-1.8mm - Grey 2.0-2.4mm - Red 2.6-3.0mm - White 3.2-3.6mm - Khaki 3.8-4.2mm - Black 4.4-4.8mm - Gold/Yellow…

Downloads
31
Likes
4
Rating
0
P
PrintablesAndy Forsberg

Greg's Wade Accessible Belt Drive Extruder, Rev2

This is a mash-up of the Greg's Wade extruder and Terawatt Industry's belt drive extruder. It brings the zero backlash advantages of the Terawatt 00str00der design together with a heavy duty, rock solid design. Note: this is designed for…

Downloads
30
Likes
3
Rating
0
P
PrintablesPiercet

Quickfit Greg's Wade reloaded extruder body - jonaskuehling variant - For Buddaschnozzle

This is simply the Lulzbot Taz 3 Extruder body with Quck fit tabs attached. I've also uploaded the extruder latch for convenience. You will need to find an idler somewhere. Print instructions Category: 3D Printer Parts Summary This is…

Downloads
30
Likes
2
Rating
0
P
PrintablesPiercet

E3D6 Variant 3.00mm filliament wade's reloaded extended height extruder

This version has a slightly modified socket to accomodate an E3D V6 instead of a hexagon hotend. Print instructions Category: 3D Printer Parts Summary This version has a slightly modified socket to accomodate an E3D V6 instead of a…

Downloads
28
Likes
3
Rating
0
P
PrintablesPiercet

3.00MM filliament Wade's Reloaded Extended height Hexagon Mount Extruder

This is a slightly modified 3.00mm filliament variant of DiscoJohn's Taller Extruder Mount. This version removes some material from the "wing" section and uses a slightly shorter bolt. This is designed to bolt to the upper mounting bolt…

Downloads
26
Likes
2
Rating
0
P
PrintablesPiercet

1.75MM filliament Wade's Reloaded Extended height Hexagon Mount Extruder

This is a slightly modified 1.75mm filliament variant of DiscoJohn's Taller Extruder Mount. This is designed to bolt to the upper mounting bolt of a Taz 3d printer, and requires a hexagon hotend. The Idler latch and Extruder Spacer are…

Downloads
25
Likes
0
Rating
0
P
PrintablesPiercet

Experemental Belted Quickfit Wade's Extruder with tensioner

This is a belted variant of the jonas kuehling's greg wade extruder. for Buddaschnozzle. It uses the Lulzbot Taz 3 Extruder as a base. It is designed to fit the extruder latch and idler tube filliament guide, however neither of those…

Downloads
23
Likes
2
Rating
0
P
PrintablesJoergen Richter

Wade's extruder melting

Got myself an Aurora A5 enhanced in 2018. Inspired me to do this in Blender. Print, heat the blobs, bend over edge

Downloads
22
Likes
10
Rating
0
P
PrintablesFervi3d

Ventilador de capa para BODY EXTRUDEUR WADE 1.75mm

Usa este ventilador como ventilador de capa, especialmente útil si estás usando PLA y quieres hacer piezas con voladizos. Piezas para acoplar y montar un ventilador de capa en un BODY EXTRUDEUR WADE 1.75mm El ventilador es un ventilador…

Downloads
22
Likes
3
Rating
0
P
Printables3D-PT

Lulzbot Modified Beefy Arm & Latch for Greg Wade Extruder

This is another modified Idler arm and latch for Lulzbot Mini, 2, Taz 5 printers. This is designed so you could open and close the idler with one hand. This incorporates the new beefy idler Arm & Latch. I use this so I can quickly hot…

Downloads
19
Likes
2
Rating
0
P
Printablesmastercartman

Creality K1 Bearing Spool Holder - Wrench - Greg's Wade's - Edition

I modded the roller to use with a old and beloved Greg's Wade's Extruder bolt, that isn't of any use with todays modern printers anymore 😅 If you got here, I guess you got one too in your archive 😉 Except a M8x70 hex screw it uses the…

Downloads
19
Likes
1
Rating
0
P
Printables3D-PT

Lulzbot Taz 5 Speed Idler arm & Latch for Greg Wade extruders

I have thick fingers, so switching filament quickly can be difficult with the standard idler arm and latch. I also found that the idler arm wore a lot at the point where the filament first came through, so I made it into a funnel shape to…

Downloads
18
Likes
0
Rating
0
P
PrintablesR con R 3D

Mini Eggpool (Wade Wilson)

Mini version of Eggpool (Wade Wilson) Not much is known about Eggpool beyond a cover appearance with Spider-Ham.

Downloads
15
Likes
2
Rating
0
P
PrintablesGrafguenter

Wappen des 1. Korvettengeschwaders

Wappen des 1. Korvettengeschwaders

Downloads
15
Likes
2
Rating
0
P
PrintablesSlushpuppy154

Inverted Belt Driven Wades Extruder

This is designed to work with a Prusa Steel frame and carriers. Mine is heavily modded, so the alignment with the X axis endstop switch could be an issue for users. Mounting it on the moving part of the X axis like I did isn't really the…

Downloads
15
Likes
0
Rating
0
P
PrintablesSE

Wader wheel

I don't have the original wheel so I created similar. If you have original one, please, send me outer diameter. Easy to print, any material works. It's hard to push it on but it won't fall.

Downloads
15
Likes
1
Rating
0
P
Printablespansono

Eventorbot wade bowden adapter M6

Modified it for M6 pushfits. Category: 3D Printer Parts

Downloads
14
Likes
0
Rating
0
P
PrintablesLucas

Vinyl plotter drag knife holder for wades extruder (mendel90)

Holder to mount a silhouette cutting plotter blade (drag knife) on a Mendel90 3d printer, to use the 3d printer as a cutting plotter / vinyl plotter. Might fit other printers as well. Meant for SILH-BLADE-3-3T, fits on extruder mounts…

Downloads
14
Likes
1
Rating
0
P
Printablesrealtoft

40mm Fan Mount for Wade's Extruder

40mm fan mount with duct for Wade's Extruder when mounting to a RepRap Wallace or similar printer with Y-carriage rods mounted next to each other instead of one above another. Category: 3D Printer Parts

Downloads
13
Likes
1
Rating
0
P
PrintablesB&B TECH

Wades to Bowden Adapter

wades to bowden adapter. Fits into the bottom of a wades extruder to convert it into a bowden tube setup instead of a e3d hotend. I used the wades extruder for awhile and really liked it on my older custom printers.

Downloads
13
Likes
0
Rating
0
P
Printablesfrogger1805

support capteur Z autobed level pour WADE

alors voila ma première pièce pour mon imprimante. une prusa i3 rework. mon plateau maison étant voilé, je me suis mis a l'autobed leveling. et voici donc mon support pour mon capteur inductif (branche directement sur le endstop Z de la…

Downloads
11
Likes
1
Rating
0
P
Printablesavrhacks

Aperture Science Logo Greg/Wades Herringbone Gear Set

For my first RepRap build (customized Rostock w/traxxas) when looking for an extruder I decided on the Greg/Wade based Rostock (Thing 60531 by RichRap) extruder would be the best option given that it was designed for Rostock style…

Downloads
11
Likes
1
Rating
0
P
PrintablesThePhilSProject

Greg's wade v5 - PTFE mod

An idler for the Greg's wade extruder v5 which has been modified to allow a PTFE tube to be used to guide the filament. Use 4mm OD / 2mm ID PTFE tube. Category: 3D Printer Extruders

Downloads
10
Likes
1
Rating
0
P
PrintablesHugo

Parametric proximity sensor mount for Wade L3K Extruder

I created this piece to mount my capacitive sensor on the Wade L3K Extruder. I first created one for my first sensor (pretty big one) on sketchup, then when I received my replacement sensor (much smaller/lighter), I decided to recreate…

Downloads
10
Likes
2
Rating
0
P
PrintablesLokijester

Wade (Spaghetti Master)

a mix of a few different parts (thank you) with a few added touches :) Category: 3D Printer Extruders

Downloads
10
Likes
0
Rating
0
P
Printablesarminth

Guidler with filament-sensor-mount for Greg's Wade's Geared Extruder

Update as of September 29, 2018: New version uploaded. Now with rounded corners and Hexnut-holes for wrenchless mounting. This is a remix of the guidler from the geared Extruder. It enables you to mount the cheap filament runout sensors…

Downloads
9
Likes
0
Rating
0
P
PrintablesSpectreGadget

Robo3D R1 Gregs Wade Adapter Plate

Adapter plate for Mike Kelley's modular carriage v2 that allows the stock extruder to be mounted. I have not fully tested the mounting. Category: 3D Printer Parts

Downloads
8
Likes
1
Rating
0
P
Printables2Mars

Wade Extruder Teil

Wade Extruder Teil Category: 3D Printer Extruders

Downloads
8
Likes
1
Rating
0
P
PrintablesC_Cheetos

Wades L3K - Adjustable Radial Fan Mount (for Anet A8 Fan shrouds)

EDIT: made a stronger version, PLA worked fine before (v3), if printed in PETG or ABS use the final version. Word of warning though, printing the final (stronger) version will partially block access to the hobbed bolt. Also see this…

Downloads
8
Likes
4
Rating
0
P
PrintablesHugo

Hotend Fan Mount - 25mm - J-Head for Wade L3K Estruder

Love this small 25mm fan I bought on ebay so I created a mount for it. Fan was called Super Mini DC 12V 2Pin 25MM 2510 Cooller Brushless Cooling Fan 2 wrie * on ebay at the time.* Category: 3D Printer Parts

Downloads
7
Likes
0
Rating
0
P
PrintablesSimo Apell

Horizontal mount for Greg's Wade's accessible extruder

This is a bracket to mount the Greg's Wade's accessible extruder horizontally. This was designed primarily for mounting to inside of a delta printer top triangle with 2020 profile. It has screw holes to fix it from two sides (top and…

Downloads
7
Likes
2
Rating
0
P
Printablescperiod

NSTT GregsWades Extruder Adapter Plate

I've got too much on the go to try rebuilding my entire carriage, so I threw together a simple adapter so I can just swap out my original extruder for an NSTT. It mounts into the extruder with M3x25mm bolts, and I'm using M5 nuts and…

Downloads
5
Likes
0
Rating
0
P
Printablesdepth_craft3d

Biggleswade Castle

Biggleswade Castle is an architectural model STL/3d print of a real castle-style building, ideal for anyone searching for a historic castle building model, uk castle architecture, or british historic building diorama pieces. Use it for…

Downloads
5
Likes
0
Rating
0
P
PrintablesMonsieur-Pierre

Wade Ripple - Elemental 3D Model

💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Bring the lovable water element to your collection with…

Downloads
5
Likes
1
Rating
0
P
PrintablesPenny Koole

Wade Garrett Head

A man puts a gun in yer face, you got two choices- stand there ‘n die or kill the *********er!

Downloads
4
Likes
1
Rating
0
P
Printablesmatt1345

Wader Garage Barrier

my recreation for the barriers of the "Wader Toys Park Tower"

Downloads
1
Likes
0
Rating
0
P
PrintablesAlex Markin

Mini-Valve for easy tightening guidler on a Greg's Wade extruder (Allen-hex-bolts cap)

When i tired to use Allen wrench every time i need to change filament or fix filament-jam, i decided to do this little helper, so i could easy screw\unscrew bolts with my bare hands. Fits to any M3 bolt. Useful for those who have Greg's…

Downloads
0
Likes
0
Rating
0