3.00MM filliament Wade's Reloaded Extended height Hexagon Mount Extruder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a slightly modified 3.00mm filliament variant of DiscoJohn's Taller Extruder Mount.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a slightly modified 3.00mm filliament variant of DiscoJohn's Taller Extruder Mount. This version removes some material from the "wing" section and uses a slightly shorter bolt. This is designed to bolt to the upper mounting bolt of a Taz 3d printer, and requires a hexagon hotend. The Idler arm, latch and Extruder Spacer are not my work, and are included here for conveniance only.
Why a taller extruder mount you ask? Why add the extra plastic weight? The reason is simple. by extending the extruder body up to the upper bolt hole, you allow the extruder to tie directly into the carriage mount structure, which eliminates front to back nozzle flex. Without this taller mount, a stock taz toolhead can flex +/- 0.15mm forward or backwards, particularily on corners when the extruded plastic drags on the part during a vector change. This eliminates that issue entirely. This fits the Taz 6 style carriage or my own reinforced carriage here http://www.thingiverse.com/thing:1113697
If you wish to use the stock Taz 4 or 5 carriage, try this one instead. http://www.thingiverse.com/thing:755184
Print instructions
Category: 3D Printer Extruders Summary
This is a slightly modified 3.00mm filliament variant of DiscoJohn's Taller Extruder Mount. This version removes some material from the "wing" section and uses a slightly shorter bolt. This is designed to bolt to the upper mounting bolt of a Taz 3d printer, and requires a hexagon hotend. The Idler arm, latch and Extruder Spacer are not my work, and are included here for conveniance only.
Why a taller extruder mount you ask? Why add the extra plastic weight? The reason is simple. by extending the extruder body up to the upper bolt hole, you allow the extruder to tie directly into the carriage mount structure, which eliminates front to back nozzle flex. Without this taller mount, a stock taz toolhead can flex +/- 0.15mm forward or backwards, particularily on corners when the extruded plastic drags on the part during a vector change. This eliminates that issue entirely. This fits the Taz 6 style carriage or my own reinforced carriage here http://www.thingiverse.com/thing:1113697
If you wish to use the stock Taz 4 or 5 carriage, try this one instead. http://www.thingiverse.com/thing:755184
Print Settings
Printer Brand: LulzBot
Printer: TAZ 5
Rafts: No
Supports: No
Resolution: 0.5mm nozzle
Infill: 85% or better
Notes:
It's an extruder body, so ABS or higher temperature material is reccommended. Pre generated built in support.
Post-Printing
Instructions
Print as normal, remove the built in support from the bearing pocket and the idler arm, install Extruder hardware as usual. You will need a longer bolt to replace the stock M3 extruder mount bolt (50mm long M3, they are generally difficult to find locally) . I also usually glue the extruder spacer to the extruder body for conveniance in mounting.