Search results: walled

Sort order

39 models

P
PrintablesKYZ Design

Gridfinity Thick Walled Divider Bins - 20 Sizes

Modeled from scratch to optimise for strength, rigidity and a quality feel, not for “fast print”. Slightly deeper than standard bins. No magnet holes. Walls are 2.6mm thick.

Downloads
698
Likes
113
Rating
5
P
PrintablesGuyH

Wavy walled plant pot

I designed this plant pot because I wanted something unique. I hope you like it. I've added two STL. One you can use vase mode to print.

Downloads
545
Likes
99
Rating
4.8
P
Printablesmbastas

Transtibial (below-knee) prosthetic (single-walled) sockets

Hello! Today, I am uploading some of the generically rendered transtibial prosthetic socket models I had made back in the day. These are produced and provided for EDUCATIONAL purposes only. They are NOT/NOT/NOT meant to be printed for…

Downloads
359
Likes
19
Rating
5
P
Printablespaul020559

Filament Clip (Universal, Remixed) for Thicker Walled Spools

Same as original remix but for spools with thicker walls (thanks to WhatWouldAnEngineerDo for pointing out that cardboard spools are a bit thicker). The first remix is at:…

Downloads
321
Likes
56
Rating
5
P
Printablesvg1

Filament Spool Clip v6 - for thin-walled spools

Keep Your Filament Tidy – For Thin-Walled Spools (V6) An improved, compact, and user-friendly clip designed to secure filament ends on spools—preventing unwinding and tangling. Now in Version 6 , for thin-walled spools. Ideal for storage,…

Downloads
270
Likes
17
Rating
5
P
Printablesroman_hegglin

Polygon Mask - Voronoi Style (single walled, thicker and flat bottom)

I just made some adjustments over Thing 191652. This one is thicker and has a flat bottom. So it should be easier to print. Category: Sculptures

Downloads
192
Likes
50
Rating
5
P
Printablesmbastas

Transfemoral (above-knee) prosthetic (single-walled) sockets

Hello! I am uploading some generically rendered transfemoral prosthetic socket models I had made back in the day. These are (-yes,- a little low res and -I know- they could use a little clean up) produced and provided for EDUCATIONAL…

Downloads
179
Likes
10
Rating
0
P
PrintablesKen226

162x82x52mm Thick Walled Rugged Mini Case

This is a thick walled rugged case for whatever you need to store. The interior dimensions are 162 x 82 x 52mm. The corner bumpers can be printed with rigid material like PLA, or with a flexible material such as TPU and are attached with…

Downloads
142
Likes
41
Rating
5
P
PrintablesDAmber

Gridfinity Kitchen Walled Blanks

For some of my longer utensils the blanks allow too much overlap, so I've added walls to the blanks to keep things separate. If you need another size I can add one pretty easily.

Downloads
132
Likes
19
Rating
4.75
P
Printablesedcdadstuff

Desk tidy organiser Organizer - sticky notes, business cards pen pot thin walled

Desk tidy designed to take up most room on an Ender 3 sized bed. Made it thin walled to use less filament for maximum space. Compartment for the larger Post It, sticky notes. Slopped section for coins or bits and bobs (screws/bolts etc)…

Downloads
123
Likes
12
Rating
0
P
Printablesroman_hegglin

Polygon Mask - Voronoi Style (Single walled)

Polygon Mask - Voronoi Style (Single walled) Should be easier to print than thing 179222. http://www.thingiverse.com/thing:179222 There is a normal and a thick version of the mask. Edit 2014-04-08: Check out this mask, it should be easier…

Downloads
102
Likes
33
Rating
5
P
PrintablesElairdionne

Honeycomb Storage Wall Screw-in Walled Shelf

A shelf for use with RostaP's HSW, it has a sloped wall in the front to hold items that might slip. Its dimensions are 100 x 70 mm There is also a variant with a hole for screwdrivers. It uses the m3 connector as well as two hollow…

Downloads
86
Likes
15
Rating
0
P
PrintablesZurrie

Stackable Two-walled Sorting-trays

I wanted a version with consistent wall thickness and easy to print, so I made three different sizes.

Downloads
68
Likes
27
Rating
0
P
PrintablesMark Harrison

thin-walled boxes

Simple SCAD-based thin-walled boxes. Customizable. Category: Parts

Downloads
67
Likes
4
Rating
0
P
PrintablesConr8r

9-sided-twist planter Thick walled for MMU

This variation uses subtractive volumes to convert the model into a thick walled print for multicolor prints.

Downloads
57
Likes
6
Rating
0
P
Printablesgringer

Open-walled Magnetic Rack

An open-walled magnetic rack, designed for 1.5 / 1.7 mL centrifuge tubes and powerful AMF 22023A magnets (20mm x 10mm x 5mm; 7.4kg pull force). In testing, this can clear 150 µl of Ampure XP beads in about 30-60s, and 150µl of his-tagged…

Downloads
55
Likes
5
Rating
0
P
PrintablesDon

Double walled screw top Modelo Koozie

To those who love to drink Modelo beer, I remixed a Screw Top Double Wall "Scientifically Tested" Koozie by @cream110_291842 . The reason I remixed this is because of the proprietary shape of Modelo beer bottles. It’s one of my favorite…

Downloads
53
Likes
1
Rating
0
P
Printablesgr8hifi

Thick Walled Colander

I needed a small colander for washing fruit in the morning. The ones I could find were all very thin walled making them feel flimsy. I made this one with 5mm thick walls when printed at 100%. no supports were necessary but I did lay down…

Downloads
49
Likes
9
Rating
0

Magnet Plastic Prison (Double Walled Container)

Air gapped capsule loosely inspired by Magneto's Plastic Prison. No supports needed, model based on .4mm line width and .2mm layers. There are .step and .f3d files included to account for different air gaps and different magnet sizes.…

Downloads
42
Likes
18
Rating
4
P
PrintablesAndrey Orlov

Wall plaque. Kowloon Walled City

Kowloon Walled City Kowloon Walled City (Chinese: 九龍寨城) (simplified chinese 九龙城寨), pinyin Jiǔlóng Chéng Zhài , was an extremely densely populated and largely lawless enclave China within the boundaries of Kowloon City, British Hong Kong.…

Downloads
33
Likes
11
Rating
0
P
Printablesusinguser

Walled Diamond Pen Holder - triply periodic minimal surface

A walled diamond TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Filament: / PLA Category: Office

Downloads
32
Likes
4
Rating
0
P
PrintablesRypydus

Double walled flower pots on the wall

Flower pots on the wall. Double walled.

Downloads
31
Likes
14
Rating
0
P
Printablesusinguser

Walled Lidinoid Pen Holder - triply periodic minimal surface

A walled Lidinoid TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Filament: / PLA Category: Office

Downloads
28
Likes
3
Rating
0
P
PrintablesDerk

Walled extention for Secrid Cardholder

Extention with drawer and moneyclip for the Secrid cardholder

Downloads
21
Likes
3
Rating
0
P
PrintablesRypydus

Double walled flower pot on the wall - bigger

Bigger flower pot on the wall. Double walled. Some smaller is here .

Downloads
20
Likes
2
Rating
0
P
PrintablesLrplana

Minimalist rough walled pot

Minimalist, rough-walled pot that includes a square base or plate to collect excess water. Designed for easy and fast 3D printing, without the need for supports. I recommend using water-resistant materials, such as PLA+ or PETG, to…

Downloads
17
Likes
3
Rating
0
P
Printablesusinguser

Walled Schwarz Pen Holder - triply periodic minimal surface

A walled Schwarz TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Filament: / PLA Category: Office

Downloads
17
Likes
1
Rating
0
P
Printablesusinguser

Walled Neovius Pen Holder - triply periodic minimal surface

A walled Neovius TPMS pen holder. 80mm tall, 60mm wide. Print without raft, support, brim etc. 0.2mm layer height is fine for this. Print Settings Rafts: No Supports: No Filament: / PLA Category: Office

Downloads
17
Likes
1
Rating
0
P
Printablesfcastellano

Honeycomb Wall - Front Walled Shelf

a small tray with a wall in front.

Downloads
14
Likes
2
Rating
0
P
PrintablesZacokalo

ZAC personalized walled plate

Created to cover an unused cable outlet behind my 3D printer. It looks a lot nicer in timelapses. I created in two parts to originally put an LED to backlight the logo. The Zac backplate can be reversed to have either the logo protruding…

Downloads
14
Likes
2
Rating
0

(Egg) Multi-Walled Vase Mode

Here are two egg-shaped models designed primarily as example prints to demonstrate the technique of using two walls and ribbed structures in vase mode printing. The first model features a smooth, two-wall construction, while the second…

Downloads
13
Likes
1
Rating
0
P
Printablesjorych

Practical handle for IKEA Glass PASSERAD Double walled glass, 30 cl

Practical handle for IKEA Glass PASSERAD Double walled glass, 30 cl https://cad.onshape.com/documents/e6d1e09a8c2089af7a35327d/w/ba60cc413362914585e5660a/e/6d08409efd08b9edcfabdc10?renderMode=0&uiState=65e888d36069206d47a142f2

Downloads
13
Likes
2
Rating
0
P
PrintablesManvith Malali

Walled castle

Supports needed.

Downloads
10
Likes
4
Rating
0
P
Printablessmoothmunkey

Creality K2 Plus Thin Walled Internal Waste Bin

This is a remix of The Overengineered (tm) Internal Waste Bin with thinner walls for faster printing. This pairs with the excellent internal waste chute .

Downloads
7
Likes
0
Rating
0
P
Printablesedcdadstuff

Gridfinity Bin 6x3x10 thicker walled

I created this bin for a Fluke multimeter, as I didn't want a moulded shape. This is because I have the magnetic strap on the meter and also wrap the leads around. Due to running an Ender 3 still, this was too large to print on the bed.…

Downloads
6
Likes
0
Rating
0
P
PrintablesW5AUG

Walled Garden

I changed color by layer height. Brown soil and trails around the green hedgerows. Brick wall and concrete topper. Enjoy an ignorance is bliss stroll around your very own walled garden.

Downloads
2
Likes
2
Rating
0
P
Printables

Transtibial (below-knee) prosthetic (single-walled) sockets

Hello! Today, I am uploading some of the generically rendered transtibial prosthetic socket models I had made back in the day. These are produced and provided for EDUCATIONAL purposes only. They are NOT/NOT/NOT meant to be printed for…

P
Printables

Transfemoral (above-knee) prosthetic (single-walled) sockets

Hello! I am uploading some generically rendered transfemoral prosthetic socket models I had made back in the day. These are (-yes,- a little low res and -I know- they could use a little clean up) produced and provided for EDUCATIONAL…

P
PrintablesDevise3D

Walled Shelf (Modular Dovetail Square Shelving System)

This is a modular square wall shelf. It allows you to print and connect as many shelves as you need to store what you have. Each shelf has a dovetail on the top and bottom for connection with another shelf. This shelf is compatible with…

Likes
0
Rating
0