80 models
This is a handy 2-part print that recreates the housing of a typical watchmakers loupe. It consists of a threaded base and top that will retain a single biconvex lens. It's based off of designs used in the watchmaking industry, with a few…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
hi, I have just made this cleaning basket holder, it has already been through a few tests so far it is doing well. Long-term tests will follow. They should also fit Greiner machines, but I haven't tried them yet, which is why it's not…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
This tray is designed for easy deployment across a multitude of watchmaking and jewelry-making bench styles. Can fit inside most side-drawers or be laid across in series within deeper/wider drawers to quickly organize items. And of…
Simple tweezers stand for watchmakers or hobbyists. Keeps tweezers in easy reach without cluttering up the workbench. V2.0: Added separators as done by a someone who remixed my V1.0 file. Thanks for the idea :) In Bambu studio I changed…
This pagoda pulley matches the diameters and profile of a Boley Watchmaker's lathe pulley. It mounts on the 15mm keyed shaft of a popular, low-cost, six-pole, variable speed sewing machine motor. I printed it like a Voron or Milo 1.5 Mill…
Gridfinity Watchmaker Bergeon Oiler Tray
When restoring a watch I wanted to make sure I could keep everything together. Case, bracelet, crystal and all the small parts. I created this system to do that. A normal tray with a protective dome can be placed on top and will create a…
Gridfinity Watchmaker Bergeon Presto Tool Storage
A simple holder for watch dials Print notes No supports needed 0.2 or 0.4 nozzle This model requires a careful consideration about XY hole compensation setting. For me a value of 0.2 worked for 0.4 nozzle on Bambu Lab A1 mini Updates log…
Gridifinity nesting 3x3 watch part holders with a lid. These models are part of my Watchmaker Gridfinity Collection I recommend printing at fine resolution (.08) and using ironing as well on all top surfaces.
This is a handy package for using a sewing-machine motor (with foot speed control) with a watchmakers lathe. I chose to step the speed right down with a massive 120mm pulley - you can certainly get all the torque you need with this! The…
Watchmaker's inspection block, useful to check out state of pivots and wheels teeth. The height is matched for Bergeon 4040 movement holder, so there's no need to refocus microscope. Print notes: No supports needed Top layer ironing is…
Prints without supports, lid is compensated a bit for rough tolerances, should fit good on many different printers!
This is a couple variations on a stand for a set of six small screwdrivers. It will work for most any screwdriver that will be held in a 6mm diameter, 30mm deep hole but I made it for my set of Kwong Yuen watchmaker screwdrivers. There…
The model is without the text. I made the text using a slicer and didn't succeed at that, so the model I'm sharing is without it. The holes diameters on top layer: 15 mm, 10 mm, 10 mm, 10 mm, 7 mm, 7 mm, 7 mm, 7 mm, 7 mm, 7 mm, 5 mm.…
Gridfinity Watchmaker bergeon Screwdriver Holder. This fits on top of the watch part storage containers 3x3 plates since it is part of my Watchmaker Gridfinity Collection :
For the watch maker in you, sometimes resizing braclets can be a pain to measure. Have no fear, I've made a tool for you! Now you can just slip the band over the device and it will tell you the band size. Measures from 5.5 to 8 inch…
Plastic Watch Band Bracelet Holder Block Links Repair Tool for Repair and Watch Band Replacement
Hi everyone! Today is your happy day! You will never have problems holding a glass loupe to your eye again. I created a glasses frame for a watchmaker’s loupe/eyeglass. There are three versions for 22, 27, and 29 mm loupes. It’s easy to…
Gridfinity Watchmaker Buergeon Hand Setting Tools
This is a prototype of 3d printed watchmaking jewel press. It is functional, but depending on your resources you will need to source anvils/pushers for the press (buy/turn on a lathe). You can also print them, but they might be not sturdy…
Printed in PLA to perfectly fit my Mitutoyo digital micrometer model 293-340. Allows safe measurement of delicate watch parts like pivots, etc., that would be risky with a handheld micrometer. Added an angled version (white) which makes…
Watchmaker's anvil for general watchmaking chores. A plastic version is great for many things when the hardened steel version might scratch parts. Print with a .2mm nozzle for best resolution and sharpest detail.
This is a simple storage box I made, becuase I wanted to be able to easily store all the parts of a watch including the screws, dial, movement parts and the case. I like to keep everything seperated so it doesn't get mixed up or lost, and…
Der Uhrmacher - Magnet - Ring Durchmesser 21,5 mm ist zur aufname eines Magneten D12 x 2,4mm erstellt. Der fertig montierte Ring ist dazu gedacht beim zerlegen und montieren kleiner Geräte z.B. Uhren, Laptops, Elektrischer Eisenbahn,…
This case holds the Harbor Freight Watchmaker's Hammer and all of the hammer heads. The Hammer and heads are pressed into the case and “clip” into place. The lid is held in by twisting four pegs as seen in the images. Print in two parts:…
Gridfinity 1x1 holder for Bergeon 1458-A-12 watchmakers Lupe (12x) 6HU (42mm) +4.4mm Lip Fully stackable, fully Gridfinity compliant
Watch oil comes in a tin with foam. Carry around enough of it and it takes up a lot of room. I needed something that would hold all my oiling equipment and supplies in one place that ideally also fit in a Harbor Freight Gerstner-ripoff…
Watchmaker Oiler tray/case with base for oil holders can be used on Bergeon, Horotec and generics Print Settings Supports: No Resolution: 0,20mm - 0.30mm Infill: 10% Filament material: PETG Nozzle: 0.4mm
This is a screwdriver stand designed for the Esslinger watchmaker screwdriver set. Basically, I wanted a spinning stand similar to what you get with the Bergeon or Horotec sets, but those sets are expensive. I painted mine so that each…
This screwdriver stand holds 6 watchmaking screwdrivers, with various hole widths to ensure a snug fit. In addition, there are nine other holes that can hold oilers, tweezers, or other small tools. The stand uses a skateboard bearing…
This might be a unique item and I don't know how useful it will be to others but I thought I would post it anyway. This box is a 2 x 3 gridfinity compatible box which will hold 5 precision screwdrivers with 3mm bodies. Important: I don't…
Base holds a Starrett micrometer for safe measuring of delicate watch parts that would be risky by handholding a micrometer. Printed in PLA for an older Starrett mic 496-1in. I can't promise it will fit other/all Starrett models. Includes…
Low profile friction fit Moebius Oil holder
Easy to print. Upperpart needs support on the bed. I used PETG en works well. Layerheight of 0.15mm is advised.
A non-standard gridfinity watchmaker's tray that I made for my dad. It's technically out of gridfinity spec in the sense that it's only 1U tall, so the cups themselves cut rather deep into the base (there's only 1mm of plastic on the…
I use 1 inch by 1 inch baggies for watch parts - this is an organizer for putting these baggies in.
Ever wondered what to do with Google Cardboard VR Glasses you may have lying around? Look no further. With this print, you can turn the fresnel lenses that you find in Cardboards into an eye loupe. The model is designed for one 25 mm…
This is a tool to press out the pins of a watchband. You need an M6 nut and a M6 screw with center hole in the dimension of your band pin. (Centerhole and pushpin not mounted in the picture) Print instructions Category: DIY Summary This…
A emergency balance tack (in case you have to few or non at all) for watchmakers. It consists of the printed base and a toothpick cut in two pieces (approx. 2/3). Insert the cut end of the toothpick into the holde and press it in as long…
Here is a housing to manage all your watchmaking oilers.
Watchmaker screwdriver blade container Bergeon style, Horotec for blades of maximum length 28mm. Print Settings Supports: No Resolution: 0,10mm Infill: 0% Filament material: PETG Nozzle: 0.4mm
I had to cut small layers out from the top and bottom layers to get smooth surfaces. Print's fine with PLA and 0,16mm layer height without supports. You might want do ironing to get smooth top surface.
Small useful print to organise your precision watchmaker screwdrivers. My prusa mini was not precise enough to print the numbers right but it's maybe doable with a resin printer. I also had to drill out the hole for the smallest…
Often, when working on 3d prints or PCB work, I need something to get up close and get a better look. Rather than pull out my microscope, I often reach for a watchmaker's loupes. While the ones I have are quite inexpensive, they are super…
The widely used Weishi 1000 and 1900 timegrapher is an excellent timing machine for hobbyists. However, the stand includes a small aluminum piece that directly supports the watch during testing. It works, but it always bothered me knowing…
Container for small parts with a transparent lid, dustproof, especially for watch parts. Designed for GOLDPLAST Fingerfood Mini Bowl #6012-21 (2€ for pack of 12)
A tweezer stand I made for the array of tweezers I use in watchmaking. Printed with no supports and 18% infill using PETG. The aperture that the tweezer fits into is 11x2.5mm and is 20mm deep. 12 slots for your tweezers. Print it in the…
This is a simple but useful print to add a “soft head” to a small hammer (often sold as a “Watchmaker's Hammer with Six heads” - see photos). The hammer head is printed in TPU and simply screws on - no threading required. Note : I often…
Storage can for watchmaker's magnifying glass. Bayonet fitting.
Shallow bin for watchmaker's gel cushions I made to fit in a small unit of drawers. Both are 2x2 unit wide trays. 2 units high. These are made to fit a generic, non-bergeon cushion. Made with the help of the gridfinity generator fusion360…
Designed and built in Sketchup, printed with my Elegoo Centauri Carbon. I printed this with 4 wall loops, 85% infill and supports on. Needs both M3 and M4 heat-insert nuts and bolts and M4 Threaded Rod. See photos for details on how to…
This little $6 mini hammer from Horror Fraught has been very useful for working on everything from vintage cameras to rifles, so I designed this Gridfinity module to hold it and the interchangeable heads it comes with. Printed on my Bambu…
As there are different versions of the Presto tool, I added three different models. One without any number on it, then number 1 and number 6. Have fun and Regards. Werner
This is a simple to print and assemble fixture for sharpening a watchmaker's (or any other very small) screwdriver with a body smaller than 5.5mm in diameter. Required Hardware: M3x12 bolt qty 2 M2x4 bolt 608 bearing qty 2 7mm x 10mm…
Reamer press for watchmakers, similar to the Seitz-Bergeon press. This tool only uses the Seitz reamer holder shaft and the necessary reamers, drastically reducing investment costs. For manufacturing, refer to the image in the slicer to…
dimensions and design derived from a vintage g boley watchmakers lathe faceplate which was missing one clamp. this is only suitable for light duty work given the originals were metal, but should perform reasonably well in light work.…
Einfach über die Lupe stülpen und es gibt keinen Staub auf der Linse. Kann mit Deckel auch zum sicheren Transport verwendet werden. Filament: Case PLA Deckel: TPU
This is a holder for the cross slide for the watchmakers lathe CZ50 by Michael Chung. It holds the cross slide safely when not in use.
Easy print to get yourself a simple tool to easily pick stakes from a watchmaker's staking set. Fits my K&D Reverso stakes, sized at 3/16" or 4.69mm. Printed with PETG for strength.
Quick change tool holder for CZ50 watchmaker lathe. One part is a flat holder for the quick change tool holders, the other is a 45 degree angle block which can either rest on the desktop or hook over small French Cleat. Can be remixed to…
Chip tray for watchmakers lathe CZ50, there is a left hand model which fits closely to the headstock, then repeat models which nest together, can print as many of these as you need.
Tailstock holder for CZ50 watchmakers lathe, holds it safely when not in use.
Shallow bin for a watchmaker's oiler I made to fit in a small unit of drawers. 2x2 unit wide tray. 2 units high. Triangular tray section for extra bits and bobs. Made to fit a generic, Chinese-made oiler. Made with the help of the…
Import the stl into your slicer, you just need to clone it to make the set of two. Printed in Sunlu's Easy PA (Nylon) @ 100% infill. Lovely strong results. Mount with 8x M4X20mm cap head bolts
Rework of the original to add a material table for measuring small parts
Milling attachment holder for CZ50 watchmakers lathe, holds it as well as a ER collet wrench and a small number of collets.
tailstock camera holder for the CZ50 watchmakers lathe by Michael Chung. This holds the tailstock microscope / camera when not in use. It is designed to be used with a small French cleat system, but can be easily remixed to have fixing…
Milling chip guard for the CZ50 watchmakers lathe by Michael Chung. Goes on the headstock when milling to stop chips going towards the stepper motor.
Watchmaker screwdriver rondell with ball bearing - 16 slots 5mm and 8 slots 3mm Screwdriverholder for nice cheap chinese watchmaker screwdriver. The rondell is mounted on 608 ball bearing.
Wall mount for the Harbor Freight Watchmakers Hammer. Includes 4 recessed holes for the interchangeable heads. Slot and recessed groove for the hammer to slide in and seat securely. Rear mount has 3 MultiConnect slots compatible with the…
Quick change holder for the CZ50 lathe, remixed to fit in a 1x4 gridfinity bin.
This is a compact and practical magnetic holder designed specifically for watchmaking tools such as screwdrivers, tweezers, and other small precision instruments. The system uses 20×10×2.8 mm neodymium magnets to securely hold your tools…
Here are a few 3D-printed watchmaker loupe designs 🔍 The idea: an open, aerated body that lets air flow through to reduce fogging, while reusing the original lens and gasket (held in place by a printed screw-on ring). 5 designs to choose…
Easy to print. Upperpart needs support on the bed. I used PETG en works well. Layerheight of 0.15mm is advised.
Wall mount for the Harbor Freight Watchmakers Hammer. Includes 4 recessed holes for the interchangeable heads. Slot and recessed groove for the hammer to slide in and seat securely. Rear mount has 3 MultiConnect slots compatible with the…
This is a simple storage box I made, becuase I wanted to be able to easily store all the parts of a watch including the screws, dial, movement parts and the case. I like to keep everything seperated so it doesn't get mixed up or lost, and…
Plastic Watch Band Bracelet Holder Block Links Repair Tool for Repair and Watch Band Replacement
For the watch maker in you, sometimes resizing braclets can be a pain to measure. Have no fear, I've made a tool for you! Now you can just slip the band over the device and it will tell you the band size. Measures from 5.5 to 8 inch…
