226 models
Credit to original creator: https://www.thingiverse.com/thing:5148846 Printed at scale 150%, and added custom support for the chin.
Print approx. €8.13–€9.94 excl. taxPreliminary estimate for one variant
Now we finally know what Master Chief looks like under that helmet. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.1mm Infill: 10% Filament: Polymaker PLA Matte Grey
Print approx. €3.28–€4.00 excl. taxPreliminary estimate for one variant
No reason at all. None. I picked the egg because it had a nice chin & nostrils for vase mode.
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant
This is a reconstruction/remix from the original one that you can find on thingiverse here . Please, for any issues contact me or leave a comment, I will replay as soon as possible!
Size: 10cm x 10cm x 7,7cm To legally sell PRINTED models, you may obtain my permission through this link: https://www.patreon.com/SpikeMix3D
The Rocktopus is one of the funniest 3d models I've ever printed. NO SUPPORTS NEEDED Might want to use a brim or raft for better bed adhesion. I just used slower first layer speeds and it printed fine. This is an original design by the…
This is a lego model of Dwayne Johnson, I have not yet had the chance to print it as my printer may not be able to print the detail in proper minifig scale (the model should be to scale at 100%) so pls comment if it works!
This is a reconstruction/remix from the original one that you can find on thingiverse here .
This OctoOctoRocktopus has 57 heads or should I say Pentacontaheptagon . This is a masterpiece. DOWNLOAD NOW! Print large since heads become very small.
This is the head of a man who goes by many names, and with this model you can create a Dwayne Johnson of your own and add to his list of nicknames This model isn't a great print by itself to be honest, but it is very easily modifiable
Statue of Dr. Smolder Bravestone / Dwayne (The Rock) Johnson from Jumanji: Welcome to the Jungle. I tried to capture every detail and that's why it's probably my shortest project in one piece. Specially designed for the Prusaprinters…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
print and then screw into base leaving a gap between the head of screw and Dwaynos head, make sure the screw head is just slightly larger than the hole in the crocs, push the screw through the hole and TADA Dwayne the Croc Johnson
Bust of Dr. Bravestone - Dunson Johnson I made two bases No. 1 is ordinary and No. 2 is a bit decorated ;) Print instructions The bases are printable without supports For the bust, I recommend earbuds, but they are probably not necessary
Dr Smolder - Glasses Holder (or just his head as sculpture) If you like it --> press like it :-) I remixed the model Dr. Smolder Bravestone - Dwayne Johnson which was designed by 14JS-studio . There are two variants, one which is only the…
Layer height: 0.2 Infil: 20% No supports
Dwayne The Duck Johnson print with supports
Meet Drock, a crossover between the Rock's head and the famous print in place dragon. I remixed the files in Meshmixer and the result is seen as here. I have printed it succesfully on my ender 3 and printed it with a brim since i wasnt…
there are still a lot of changes required. If someone can remix this figure - and the single pieces to make it really printable, that would be great :)
See 3D Printy's Printer Bobbleheads for additional parts and more information. The head is used from JS-studio's incredible sculpt .
Here is a statuette of John Wayne univers. Sculpted in zbrush by myself. The statuette is in two parts. Bust and plinth. The two will fit together at the boots. You can print it and see the little details that make up this character.…
Damian will need to some supports under his arms and hands. Put him on the slicer table it will become evident where they need to go, but otherwise he's good to go!
Edited the Rocks head on to a croc jibbitz base.
A beautiful snake with the rocks head on it.
printed with 0.2mm height and 20% infil
An extruder knob for the Ender 3 style printers out there. Use supports under the chin.
Print Dwayne at any scale you need (mine was 75%) and enjoy his plant-growing abilities. Print Settings: Resolution: .15mm Infill: 15% Supports: No Rafts: No Material: PLA Printed on: Creality CR-10 Note: I was unaware of this, but…
With PLA you can only expect about 60°c before it starts softening. I would now personally recommend ASA, because it can handle 100° before softening. Update With the success of the model I decided to spend a little time and make the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Remix of Dr. Smolder Bravestone Support Free Remix by robin3dverse. Removed the Jumanji logo at the front. Dr. Smolder is now The Rock! Please LIKE if you found this useful Category: Sculptures
An emergency whistle with the rock's head on it WARNING - VERY LOUD! whistle is from https://www.thingiverse.com/thing:3130078 if you made one then please post a make. 4/25/22 fixed open edges 5/8/22 added Big version that has slightly…
Batman, just like every super hero, needs a base of operations to work from. And he needs a place to sleep. So it only made sense to design a Wayne Manor / Batcave for him. This miniature set has a secret opening in the front of Wayne…
YaHoOoOoOoOoOoOoOoOoOoOoOoOoOo
Dwayne "The Aglet" Johnson, put him on over your Aglet
Not my model all credit to original designer Just split parts as requested
These directons are straight from Eastman's original model for this figure: The body Now, the body part leans quite heavily, so put nice wide brim on it to keep it in place, and if it makes you feel safer put some supports down as well.…
A The Rock toothpaste cap
The Rock? A Christmas Ornament? So I wanted to try out Meshmixer for the first time and thought this would be a good start. This is 'Little Mitch' from Baywatch 2017, whilst the actual film was, erm. Yes. This little character addition…
This is one of the funniest 3d prints I have ever done. 3d Print should be easy. Might have to use supports
Another year, another Easter bunny with The Rock's head! This time, with a woven baket to hold whatever you see fit. I have also included the model without the basket, this one might need supports for the paws. And in case you prefer…
This is a small 100mm statue of dwayne the rook
Dwayne “The Rock” Johnson Necklace / Ornament. This is a remix of the original here . Please leave a like and post your makes!
All credits for the original (amazing) venus model from Venus de Milo by CosmoWenman Something fun and elegant(?) to print for your personal art gallery. Printed with Filament : Marble PLA Infill : 7% Gyroid (Check the original venus…
A Ring that is approximately 0.85 Inch opening made in the Dwayne style
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Print slightly bigger if you are aiming to get the print quality very good.
Who else would be a better star then Dwayne Johnson? Let him smolder Santa. Rock Bottom the Elf on the Shelf. I created two versions; One version is one whole print. The second version is split along the Z-Axis, with a plus-shaped key, so…
Regirock STL came from https://www.thingiverse.com/thing:3019610/files
Yet another fabulous rendition of The Rock for you to enjoy
just do anything it doesn't matter and it takes roughly 7 hours but you can scale it down
Another magnificent rendition of The Rock for you to enjoy
“Welcome aboard the aero-Dwayne.” “We have direct flights to Johnsonville.” "Do you smell what the rock is cooking?''
The Source Model is no longer available and was removed from the Author (The new Update of Thingiverse brought back the file, even if it is no longer listed in the Authors profile… therefore, I'll share the link to the original file here:…
nothing much to explain.. oh god…
Polygon owl with dwayne the rock johnson head
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I got bored one day so I made this :)
Studies have shown that owning a Rinker increases brain function and overall productivity by up to 5000%* *participants may or may not have ingested lethal amounts of RedBull beforehand
Ever wanted your thumb to be the ultimate wrestler? Well now you can with Dwayne “The Thumb” Johnson! Be the envy of all your friends with this amazing thumb puppet!
Dwayne “The Rock” Johnson as a cat
The Rock, in this wild adventure, is now a cat… with a disturbingly human-looking head. I got bored and thought, hey, why not combine two designs?
Perfect Gag gift for Christmas
The source marked this model as adult content.
Printed with supports and 0.1mm layer height for leg strenght
The Rock, as a block. Hurl it at your enemies, bring it to brunch, give it to your children as a present.
Tête de The Rock/Dwayne Johnson sur un socle.
I'd love to see your prints. Please post a pic of your makes. Category: Sculptures
My buddy wayne, scanned in his cowboy outfit. Print Settings Printer Brand: RepRap Printer: Prusa i3 Mk2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Notes: Slice the bottom off before printing so its flat. Category: People
My son recently started learning the classic song “Stairway to Heaven” by Led Zeppelin and I couldn't resist printing a “no stairway” sign similar to the one featured in Waynes World staring Mike Meyers. No Stairway - Denied! I changed…
Wayne Enterprises, Gotham City, License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
i don't even know, he's the grockfinity
A heart with Dwayne the rock Johnson's head on it
Latest files are available on MakerWorld. Get the full Plate Print Profiles ( Color Separated ): https://makerworld.com/en/models/437743 === Set of 6 Batman themed coasters – 99mm diameter & 2mm thick. Designed to print face-down on a…
The Source file is in its original parameters too small to fit the Martian Fighting Machine (printed in 100% scale). It also comes with two files - the main Base - and the part with the Logo - which needs to be aligned perfectly……
Inspired by my coworker when he saw my Rocktopus I have on my desk when he said, “It'd be cooler if it was Dwayne ”The Croc" Johnson."
They are fragile, especially the Scanning Machine, dont drop them. Sparse infill - Gyroid - 10-20% Brims - 1-7 mm. Support - ON. If you’re in something like Bambu Studio then turn Auto Bed Leveling On instead of Auto/off many of them will…
A cool chain that can go around your wrist if big enough
Make sure to follow me on Thinagaverse and Printables if you enjoyed the models. Designs - Thingiverse
Dwayne "The Duck" Johnson
This beautiful build ran perfectly with 0.2mm layer height and 50% infill. Also it will likely need supports (on build plate only). It took about 2h 15m on my Neptune 3 Pro. The model itself is near identical to the original Prusa one in…
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to recreate the Batman: Bruce Wayne…
the cat ears are from https://www.thingiverse.com/thing:5184082 i did not take the models from any other person on thingiverse but i was inspired by them
What is Geocaching? Geocaching is an outdoor recreational activity, in which participants use a Global Positioning System receiver or mobile device and other navigational techniques to hide and seek containers, called "geocaches" or…
This model prints with ease, printed at 0.2mm layer hight, no supports and 20% infill should be adequate.
