Search results: wdr

Sort order

Counting matching models…

P
PrintablesPeopleware

Präziser Filament Aufwickler (opt. Akkuschrauber und Motormodul) - Filament winder with opt. cordless screwdriver

Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…

Downloads
2,224
Likes
321
Rating
4.8
P
PrintablesAK3D

Multi-purpose keychain with screwdriver and integrated rule

This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…

Downloads
1,436
Likes
536
Rating
4.67
P
Printablesrahix

Honey Comb Screwdriver Holder Screw Mount Improved

A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…

Downloads
1,244
Likes
318
Rating
5
P
PrintablesMrHanjak

Doctor Who - Sonic Screwdriver 9-10th Doctor (The Ninth/The Tenth Doctor's) 2005 (NO SUPPORTS)

🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…

Downloads
1,005
Likes
280
Rating
4.8
P
Printableskaje

Pegboard Screwdriver Holder - Modular Screw and Rail

This is a new approach (for me at least) to pegboard holders : pegboard screws. They are intended to be used with a “rail” for use on pegboard with hole spacing of either 25mm or 1 inch. These particular holders replace the screwdriver…

Downloads
790
Likes
131
Rating
5

Screwdriver bit holder

A holder for 2, 10, 90 screwdriver bits for easy organization and retrieval at a glance; screwdriver bits stay in place without the need for magnets

Downloads
771
Likes
70
Rating
4.33
P
PrintablesJH3D

LTT "Quick Bits" Case & Stand for Linus Tech Tips Screwdriver Bits

I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…

Downloads
706
Likes
193
Rating
4.69
P
PrintablesUASman1

Screwdriver Bit and Impact Driver Bit Holder Organizer

Use this to store and organize your hexagonal bits, driver bits, impact bits, screwdriver bits , socket set bits, driver adapters, as well as hex mounted drill bits. -Simply place the hex driver bits in vertically and spaced as desired.…

Downloads
588
Likes
76
Rating
5
P
PrintablesNicos3DPrinter

Stubby coin screwdriver

A stubby screwdriver which holds a coin. Perfect for all consumer electronics were a normal screwdriver isn't suitable. Print both parts, laying on the flat side with snug support only on buildplate. After removing the support insert the…

Downloads
416
Likes
205
Rating
4.88
P
PrintablesTimmaey

Wera VDE Screwdriver Holder

To prevent warping, I used a skirt and limited cooling to a maximum of 20%. Nozzle: 0.4 mm Layer Height: 0.25 mm Infill: 15 % Skirt: Yes Supports: None Material: PETG Just in case you wonder: I mirrored the model before printing, that is…

Downloads
359
Likes
78
Rating
5

ScrewDriver & Plier Holder

Everything is easy to print, without supports, There are 2 type of screwdriver holder with out guide with guide (this increase print time, in the 3mf file is with guide) Assembly : You will need 4x M3x6 slotted head screws for assembly…

Downloads
354
Likes
75
Rating
5
P
PrintablesAdam Kimmerly

Elecraft KH1 Mini Screwdriver Loading Coil

BACKGROUND: The Elecraft KH1 blew up the portable HF radio operating scene when it was released. It covers 5 bands from 40 - 15 m and has an internal ATU and battery. It's actually designed for hand-held use. But with the standard whip…

Downloads
295
Likes
47
Rating
5
P
PrintablesGFS

EDC Micro Screwdriver - Keychain for Hex Shank

EDC Micro Series. Compatible with each other. See also: EDC Micro Knife - Keychain (Scalpel) EDC Micro Pill Capsule - Keychain EDC Micro Tools I EDC Micro Tools II EDC Series Box Continuation of the series. EDC Micro. The same capsule or…

Downloads
265
Likes
80
Rating
5
P
Printablescbrick

Better 3dprinted LTT Stubby ratcheting Screwdriver

This is a stronger, more functional and more accurate 3d-printable version of the LTT stubby screwdriver. You need these parts for the multi color version: 1x M3x40 screw 3x M3x12 screw 2x M3x8 screw 1x M3x6 screw 1x shaft print 2x…

Downloads
249
Likes
79
Rating
5
P
PrintablesJens Willmer

Screwdriver bit storage

Inspired by https://www.printables.com/model/394330-hex-bit-holder-removable

Downloads
185
Likes
24
Rating
4.5
P
Printablespjvenda

Screwdriver holder for Bott Perfo pegboard (with variations)

This is a bracket for a square perforated board (bott perfo branded, sold by bigdug.co.uk) to hold screwdrivers. I have designed variations for: small files (6x against 4 pegs) medium sized screwdrivers (5x against 5 pegs) large…

Downloads
172
Likes
16
Rating
0
P
PrintablesAleksSadowski

Alsado Keychain Screwdriver for Makers and Engineers "Colibri"

Alsado keychain screwdriver for 1/4 inch bits "Colibri" A keychain screwdriver for 1/4 inch bits, including a bit friction fit and a bit compartment. Key Features bit friction fit prevents 1/4 inch bits falling out big keychain hole that…

Downloads
169
Likes
43
Rating
0
P
PrintablesSleepyhead

Cordless drill and screwdriver mount, my new Ryobi fits to

On reading the comments from the original it appeared the screw holes were being reported as to small. https://www.prusaprinters.org/prints/55082-universal-cordless-drill-hanger So before printing I added an extra screw hole and increased…

Downloads
142
Likes
31
Rating
5
P
PrintablesBuggi

Bit holder for Metabo Powermaxx Cordless screwdriver

This is a bit holder for hex screwdriver bits for the battery of the Metabo Powermaxx cordless screwdriver. It may also fit for other Metabo tools using the same batteries. There are two versions, one is for the 4 Ah battery, the other…

Downloads
128
Likes
24
Rating
5
P
PrintablesNuisance

Stanley STHT070885 Multibit Screwdriver hex bit holder for SKÅDIS

Adding to the skadis-system by Petri Damstén - this is a hexbit holder for the Stanley STHT070885 Multibit Screwdriver and nut setter. The hooks were created by Petri - which are required to attach the Stanley hexbit set to the skadis…

Downloads
107
Likes
19
Rating
5
P
PrintablesPIZZA_CAT

MAGNETIZER (DEMAGNETIZER) FOR SCREWDRIVERS FROM HDD MAGNETS

A very simple and convenient magnetizer (demagnetizer) for screwdrivers from magnets from 2.5 inch hard drives. All you need to do is print the two halves of the box, insert 2 hard drive magnets into them and close the box. The magnetizer…

Downloads
86
Likes
33
Rating
5
P
PrintablesSpacekoaster

Wiha small screwdriver holder

Hello, Here's a remix from the Wiha small screwdriver holder from Colorfabb on Thingiverse (https://www.thingiverse.com/thing:1487220). The holder is made to hold 6 PicoFinish HEX screwdrivers from Wiha. The original design had two holes…

Downloads
80
Likes
13
Rating
0
P
Printablesschmi

Screwdriver holder for 38mm x 38mm perforated wall

The holder fits perforated plates with a size of the holes (squares) of 10x10mm and a distance of 38mm. However, it can easily be adjusted for other hole spacing by adjusting the holder.

Downloads
72
Likes
8
Rating
0
P
PrintablesJadozub

M6 Nylon Bolt Screwdriver for RC Aircraft and Gliders

A simple tool for field assembly of all RC models that take nylon M6 screws to hold its parts together. Designed for my Multiplex Lentus for attaching horizontal stabilizer. Small size makes it ideal to leave in transmitter case to have…

Downloads
45
Likes
4
Rating
0
P
PrintablesSlastin

Skadis Halter für Modelco.fr Schraubendreherset / Skadis holder for Modelco.fr screwdriver set

Skadis Halter für Modelco.fr Schraubendreherset, anpassbar für andere Durchmesser. Als Haken wurden Standarthaken für das Skadispegboard verwendet. Skadis holder for Modelco.fr screwdriver set, adaptable for other diameters. Standard…

Downloads
39
Likes
10
Rating
0
P
Printableswbworks.aus

Multibit Screwdriver Keychain

Octagon that holds up to seven bits that attaches to a keychain. The bits can be easily used from around the outside but can also be placed into the centre for a different grip. There's a tight fit so the bits don't fall out and get lost,…

Downloads
36
Likes
13
Rating
5
P
PrintablesLC

Screwdriver and pliers hanger for modular Snap Tool Rack

To be used with Snap Tool Rack wallmount blocks (STR-001 and STR-001B). Step file also available for easier modification

Downloads
34
Likes
5
Rating
0
P
PrintablesTFL123

Cordless Screwdriver Set Wall Holder (WORX WX240/KS-Tools 515.3699/Kiprim ES2)

Wall Holder for Cordless Screwdriver Set In 4 different Variants. With logo for WORX, KS-Tools and Kiprim as Well, without LOGO. Happy Printing… Set on Picture: KS-Tools 515.3699 Printed on: Original MK3S+ Filament: NOYES PLA Grey

Downloads
26
Likes
4
Rating
0
P
PrintablesMichal_Vallo

Screwdriver hex bit case PiP (magnetic)

IMPORTANT!! requires supports on the hinges, requires inserting 6x 20*10*2mm magnets or 3x 40*10*2mm magnets as seen in the photo of the sliced file STEP FILE INCLUDED case can hold up to 18 hex screwdriver bits plus small compartment in…

Downloads
24
Likes
7
Rating
0
P
Printablesstianberg2

Bitsholder and screwdriver

Bitsholder with a strong clamp that is designed to easily slide onto a belt or pocket edge. The bits holder has room for 10 bits and a slot in the end that can be used as a screw driver. The holder has 3 slots for 9.5x9.5x3 square magnets…

Downloads
24
Likes
4
Rating
0
P
PrintablesGabeS

Pumpkin Palm Screwdriver

Printed in Prusament PETG Prusa Orange 15% infill .15mm layer height and 6 perimeters with support turned on. Screwdriver bits fit snug, may want to scale up slightly for easier bit swapping. Included bgcode file for Prusa Mini+

Downloads
22
Likes
3
Rating
0
P
PrintablesHarsesis

Wera 7400 Torque Screwdriver Holder (7440 + 7441)

I created this holder for the Wera 7400 torque wrench screwdriver. There are two separate models: Model 7440 with a torque range of 0.3-1.2 Nm Model 7441 with a torque range of 1.2-3.0 Nm You can find all the other holders and rails here .

Downloads
22
Likes
2
Rating
0
P
PrintablesAlvomane

Ergonomic Twirler for the Hazet 810R or Inbus Flow 73424 Bit Ratchet Screwdriver like WERA 838 | Ergonomischer Zwirbler für den Hazet 810R oder Inbus Flow 73424 Bit Ratschen-Schraubendreher

EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…

Downloads
20
Likes
4
Rating
5
P
PrintablesNuisance

Engineer dr-55 Ratchet Screwdriver holder for SKÅDIS

This is a dr-55 Ratchet Screwdriver for the Ikea skadis pegboard.

Downloads
19
Likes
2
Rating
5
P
PrintablesMath

Bosch Ratcheting Screwdriver mount for Skadis

Remix for a Bosch Ratcheting Screwdriver (Bit-Ratschenschraubendreher) with 12 bits that attaches to the IKEA Skadis. The through-hole is 10mm in diameter and the body of the mount was stretched in order to accommodate the 40mm diameter…

Downloads
13
Likes
3
Rating
0

Wowstick screwdriver stand insert into (not only Wiha) magnetizer/demagnetizer tool

This is on demand simple model to replace that horrible alu Wowstick stand. I have used my Wiha, but it seems other brands magnetizers are simple clones so probably compatible with others too. its removable so you could use magnetizer to…

Downloads
12
Likes
0
Rating
0
P
Printablessrirachachacha

Wera Gridfinity Screwdriver Rack 1x2 - Larger Diameter 14.55mm

Remix of Wera Gridfinity Screwdriver Rack 1x2 that includes larger holes (14.55mm max diameter) for other screwdriver models (specifically, in my case, a set of Teckman T3 - T5 torx drivers).

Downloads
11
Likes
6
Rating
0
P
PrintablesDizi

Cordless screwdriver box closure

Closure lock for my drill / electric screwdriver box. The original ones were broken.

Downloads
10
Likes
0
Rating
0

Gridfinity Generic Electric Screwdriver Holder

This is a slight modification to Jonas Grimstad's electric screwdriver holder. I noticed the original tool holder was a lot longer than it needed to be so I used the extra space to add a magnetizer/demagnetizer. Can be printed with PLA…

Downloads
5
Likes
1
Rating
0
P
Printablesschutz

Pocket Screwdriver Kit

Note: Update available here: Pocket Screwdriver Kit v2 I picked up a pocket screwdriver kit similar to this at a tradeshow many years ago, and I wanted another one so here it is. The bits fit in snugly and the cover snaps closed. No…

Downloads
12,210
Likes
5,036
Rating
4.78
P
PrintablesLoboCNC

Screw Holder for Screwdriver

I really like maxwxyz 's Screw Claw , but I'm not fond of printing the thin screw holder fingers in the vertical orientation. I also wanted to accommodate a larger variety of screwdriver sizes. This redesign has all the flexing elements…

Downloads
10,546
Likes
3,557
Rating
4.82

Universal ergonomic screwdriver

Universal Ergonomic Screwdriver (Remix) This is an updated version of the popular universal screwdriver, focusing on improved ergonomics and an expanded set of collets. The main changes concern the shape of the handle — it now fits much…

Downloads
9,056
Likes
4,599
Rating
4.9
P
PrintablesFreddyZ

ratcheting mini screwdriver

I was told that it'd be impossible to fit a ratchet mechanism inside a tiny screwdriver, let alone hold more than a single bit. This is to prove that person wrong ;) also check out the Print-In-Place version A reversible ratchet mechanism…

Downloads
7,430
Likes
4,011
Rating
4.69
P
PrintablesPavel

IKEA Skadis screwdriver holder / držák na šroubováky

Updated modified design - big “groove” added on top side, so scredrivers sit in it and cant fall off when accidentaly hit. Universal comb type holder for various tools. Comes in two sizes for bigger and smaller tools. Big - 5 cut outs for…

Downloads
7,252
Likes
1,131
Rating
4.94
P
PrintablesWürth

Würth keychain screwdriver

Würth keychain screwdriver Introducing the Würth keychain screwdriver - Your Go-To Tool on the Go! Are you tired of fumbling around for a screwdriver when you need it most? Say goodbye to the hassle of searching for the right tool with…

Downloads
7,023
Likes
1,936
Rating
4.8
P

Revolver | 2-Speed Screwdriver

The Revolver Born from a particularly frustrating weekend of printer maintenance, tinkering and DIY I bring you “The Revolver”. A fully 3d printed screwdriver for ¼" Hex Bits What started out as a fun weekend, slowly spiralled into…

Downloads
6,116
Likes
2,506
Rating
4.78
P

PocketDriver - EDC Hex Bit Screwdriver w/ Storage

The PocketDriver is a sleek and practical EDC bit driver designed to hold up to 4 bits within its body. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter. It makes a world…

Downloads
5,693
Likes
2,210
Rating
4.93
P
Printablespeaklin

Allen Screwdriver

New Version out now (metric and imperial) Keep your allen keys organized and turn them into a handy screwdriver! Head of screwdriver (black part) can rotate free for even more comfort. Note: You will need to warm up allen key with a…

Downloads
5,579
Likes
1,048
Rating
4.81
P
Printablescourroux

Screwdriver Holder Skadis

The 5 holders "tight" version is the most space effective. If you want more space in between, then the other versions are c.t.c. 40 mm like the holes in the Skadis board.

Downloads
5,548
Likes
814
Rating
4.9
P
PrintablesWhopperPrinting

Single Piston Engine - Fully Printed Buildable Kit (With Printed Screwdriver!)

Get the other engines here ! Get the screwdriver here ! Build Video/Instruction Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights). This entire print is around 180g of…

Downloads
5,310
Likes
1,143
Rating
4.93
P
PrintablesJake

Gridfinity 2x2 screwdriver hex bit holder stackable version

I wanted a gridfinity hex bit holder, there are a few available on Printables but none that quite had all of the features I wanted. I found the closest I could and remixed it to make it stackable. In gridfinty language this is 2x2 and 6…

Downloads
4,669
Likes
580
Rating
4.94
P
Printablesherbert

Pegboard Screwdriver Holder

I liked the idea of a honeycomb pattern to freely organize screwdrivers and other things from toya ( https://www.thingiverse.com/thing:3018389 ) But the solution had some flaws which forced me to redesign it. I do use Pegboards from…

Downloads
4,658
Likes
587
Rating
4.84
P
PrintablesFinn

Ergonomic Screwdriver - Bit Holder

Use your standard bits in this simple screwdriver. Update I added a folder with STLs that support different sizes of magnets. The original version is still without a magnet, which works well in my case as the tolerances are low enough to…

Downloads
4,370
Likes
1,511
Rating
4.98
P
Printablesmaxwxyz

Screw Claw for Screwdriver and Bits

Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…

Downloads
4,365
Likes
1,816
Rating
4.86
P
PrintablesStranula

Screwdriver Holder Multiboard - Multiple Mounts

I'm building out my multiboard and I like the weight bearing snaps as they feel the most secure for my setup, so I put this one together and am pleased with how it turned out Details: Elegoo Neptune 4 Pro 0.6 mm nozzle 15% infill 1.2 mm…

Downloads
3,620
Likes
478
Rating
4.78
P
Printablesfigterk

LTT Screwdriver Bit Holder (Multiple Sizes)

This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…

Downloads
3,496
Likes
436
Rating
4.86

Honey Comb Screwdriver Holder Screw Mount Remix

I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…

Downloads
3,461
Likes
552
Rating
4.73
P
PrintablesAkinayr

Honeycomb Screwdriver Holder / Shelf Remix for HSW - Multiple Version

There are several different versions. 3 or 5 Pegs With or without front lip With or without print supports needed You can even install these upside down so the on the underside.

Downloads
3,257
Likes
566
Rating
4.97
P
Printablesblack3dworks

Dewdrop Jewelry Tray

The Dewdrop Jewelry Tray brings elegance and functionality together in a beautifully minimal design. Inspired by the organic shape of a dewdrop, this tray features two smooth, curved sections, making it perfect for organizing rings,…

Downloads
3,201
Likes
911
Rating
4.89
P
PrintablesSTORM DESIGN

Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver for Winder Spool Frame 2 - Modular Design and Winder Spool Holder with Bearings - Modular Design

This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…

Downloads
3,149
Likes
236
Rating
4.83
P
PrintablesJirka

Large screwdriver holder with honeycomb pattern

Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…

Downloads
3,063
Likes
881
Rating
4.83
P
PrintablesFilip Kavan

Multiboard screwdriver holder/shelf

Multiboard screwdriver holder/shelf, robust design scaled for maximum volume of ender 3. Shelf is prepared for multiboar system: www.multiboard.io I also added support for more rigidity. V2: 7mm storter for better fit on Ender build…

Downloads
2,940
Likes
446
Rating
4.69
P
PrintablesMKS

LTT Screwdriver, With Ratchet

Introducing the unofficial 3D-printed LTT screwdriver clone, equipped with a removable ratchet mechanism and storage for six bits. Assembly is simple, with potential for minor adjustments using glue if needed. Ongoing enhancements ensure…

Downloads
2,759
Likes
1,251
Rating
4.61
P
Printablespltaylor3

Gridfinity Screwdriver Organizers

Screwdriver organizers that are compatible with Gridfinity. You will probably want to print 2 ends, and then how ever many middle pieces to organize your screwdrivers. Inspired by…

Downloads
2,713
Likes
341
Rating
4.79
P
PrintablesMeister Edel

Screwdriver Ventilator & compressed air alternative Toroidal Design

You don't have a compressor but want to remove dust, wood shavings or other light dirt from your workplace? No problem! With this attachment for your cordless screwdriver, it's done in no time at all! Is it hot and you need to cool down?…

Downloads
2,670
Likes
840
Rating
4.71
P
PrintablesKieran E

Gridfinity LTT Screwdriver and bit holder

I wanted a holder where I could grab just the driver and bit set I wanted, so I came up with this! The main 1x6 driver holder can optionally hold two rows of bits around the shank of the driver, or you can use the 1x1 bit trays if that's…

Downloads
2,411
Likes
252
Rating
4.89
P
PrintablesLeokaldzik

Annoying box, perfect gift box 56 srew, screwdriver

Perfect gift packaging for your friend (56 screw). Screwdriver included. !!!!!!!!!!!!!! If there is any problem with screwing in the screw, first screw in the M8 metal screw which will correct all errors in our printers!!!!!!!!!!!!! I…

Downloads
2,209
Likes
281
Rating
4.22
P
Printablesschutz

Pocket Screwdriver Kit v2

Update 3-Apr-24: Added files for different size magnets from various requests. Introducing v2 of the popular Pocket Screwdriver Kit ! Holds straight ¼" / 6mm bits, up to ~ 1" / 25mm in length. This version was re-built from scratch to…

Downloads
2,144
Likes
960
Rating
4.86
P
PrintablesDave Borghuis

Screwdriver holder

Holder for screwdriver (set bought at Gamma)

Downloads
2,087
Likes
207
Rating
4.87
P
PrintablesJirka

Large massive screwdriver holder / Masivní držák pro šroubováky

Large semi-circular screwdriver holder, honeycomb pattern. Large, sturdy and universal holder for small and medium size screwdrivers. Relatively long but easy to print.

Downloads
2,058
Likes
823
Rating
5
P
PrintablesICT Avatar

Tools modular desktop stand (Tweezer;Plier;Screwdriver) V 2.0

Modular stand V 2.0 The possibility of adding modules as desired. V 1.0 https://www.thingiverse.com/thing:2495885 Print instructions Category: Organization Print Settings Printer: Vertex K8400 Rafts: No Supports: No Resolution: 0,1…

Downloads
2,019
Likes
412
Rating
4.88
P
Printablesksuszka

Wera Screwdriver Holder

This is my take on designing a perfect screwdriver holder ;). I went through a lot of designs already present on thingiverse and borrowed some ideas from a few, mainly 2918462 and 3671735 . They both are excellent designs however they…

Downloads
1,918
Likes
438
Rating
4.87
P
PrintablesMelSK

LTT Screwdriver Case

FYI If printing for the Transparent or Nuclear Screwdriver print at 102% as they seem to be slightly larger. Always liked the remixes of this box for other tools so thought I would have a go at creating my own for the LTT Screwdriver.…

Downloads
1,878
Likes
399
Rating
4.95
P
Printablesdaclasen

Skadis Holder for Wera Kraftform Micro Screwdriver

This is a Skadis Holder for the Wera Kraftform Micro Screwdriver with 6 Slots. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg (you need to print 2 Hooks). As shown in the Pictures the Holders can be…

Downloads
1,779
Likes
410
Rating
4.9
P
PrintablesDSwanlund

LTT Screwdriver Bit Holder - Gridfinity

This is a Gridfinity -compatible screwdriver bit holder for the bit-sets sold by Linus Tech Tips. One of these (1x1x25) blocks will hold exactly one set of 12 bits. They are stackable when empty. LTT's bits are slightly shorter than…

Downloads
1,747
Likes
300
Rating
4.83
P
PrintablesFreddyZ

Print-In-Place ratcheting screwdriver

So after I took on Martin Rigatoni's challenge with this screwdriver and LoboCNC promptly took me up on my unintended challenge with a much improved design and we saw many more _ designs by members of the screwdriver gang I wanted to…

Downloads
1,709
Likes
415
Rating
4.62
P
PrintablesMKS

LTT Stubby Screwdriver

This is an unofficial version of the Stubby LTT Screwdriver with 5 bit storage. During testing the screwdriver could not be broken no matter how hard I tried. The metal thing is called a bit extender and is usually used for drills, costs…

Downloads
1,694
Likes
728
Rating
4.68
P
Printablesdavidmakes

iFixit Mako Screwdriver Mount for Ikea Skadis

About A simple yet secure holder for the iFixit Mako Precision Bit Set for the Ikea Skadis pegboard using the Skadis Ultimount connector. The original design was based on the iFixit Wall Mount (Thingiverse) by TinkerLifeProjects . Neither…

Downloads
1,688
Likes
293
Rating
4.95
P
Printablesmathiasl

Screwdriver Holder

This Screwdriver Holder is more space effective since you can just push or pull the screwdriver right in or out. Fits most screwdrivers and they sit tight and doesn't wiggle. To attach it to the HSW you need the empty inserts*. There are…

Downloads
1,672
Likes
253
Rating
4.97
P
PrintablesBoolean263

Gridfinity 2x2 holder for hex screwdriver bits

My first try at creating a model for sharing. Holder for 64 hex screwdriver bits and a magnetic extension bit. Inspired by LTT Screwdriver Bit Holder , but made “from scratch” in TinkerCAD using this template .

Downloads
1,571
Likes
177
Rating
4.94
P
PrintablesLocalOutlier

Low profile right angle screwdriver handle

I needed a right angle screwdriver handle that could fit in a very tight place and none of the things shared online was small enough so I quickly created one using Blender. I shared the .blend file if you want to remix it so it better…

Downloads
1,556
Likes
489
Rating
4.94
P
PrintablesMartin Rigatoni

Reversible Ratcheting Screwdriver

It's my turn again. I wanted to design a reversible ratchet that worked without moving an axle. I wanted it to be as small as possible and I wanted to keep the aesthetic of my first screwdriver keychain . This is what I've got. It's 50 mm…

Downloads
1,545
Likes
623
Rating
4.75
P
Printablesshiura

Print-in-place Palm Ratchet Screwdriver Knob

3D printed palm ratchet knob (stubby screw driver handle) Print-in-place : Just print, and you are all set. Assembly work is not necessary. Durable ratchet mechanism : Tapered ratchet gear makes it not only easy to print but also sturdy…

Downloads
1,527
Likes
270
Rating
4.71
P
PrintablesReelClones

Multiboard Ultimate Screwdriver Holder!

The ultimate screwdriver holder for #Multiboard! Holds 12 screwdrivers in the main holders, plus has slotted holes for inserting extra smaller screwdrivers, and a front rail for tweezers, pliers etc. I don't have much horizontal space so…

Downloads
1,522
Likes
139
Rating
5
P
PrintablesGlennovitS 3D

Compact Bit Driver (pocket size screwdriver)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Downloads
1,502
Likes
575
Rating
5
P
PrintablesPointNemo

Magnetic Precision Bit Screwdriver 4 mm / 6.3 mm

Printing Parameters: Material: PLA or PETG Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no One color or add color changes at 12.6 mm, 57.4 mm and 88.0 mm Tips and Tricks: Deburr the wheel Protect the wheel with some tape Use…

Downloads
1,472
Likes
577
Rating
5
P

Bosch GSR 12V-15 Battery Screwdriver Holder

Hi Here you can find holders for a Bosch GSR 12V-15 and its charger for wall mounting. I've made a single bracket up to a triple bracket depending on how many you have. The chargers are simply inserted into the holder from the top, the…

Downloads
1,447
Likes
213
Rating
5
P
Printablesdodasch

Screwdriver Holder Wall Mount

Some holders for screwdriver

Downloads
1,440
Likes
147
Rating
4.92
P
PrintablesAMTprojects

Tiny Travel Screwdriver

What it is A tiny screwdriver, storing seven 4mm Micro Bits (28mm in length) and attachable to a keyring or string on your gear. → Be prepared for that single or few screws that casually pop up, trying to ruin your day. The forces induced…

Downloads
1,434
Likes
984
Rating
4.82
P
PrintablesMarcElbichon

French Cleat Honey Comb Screwdriver Holder Screw Mount Remix

Made this remix for ¾" french cleat Added a single and a dual color version (MMU) Print upside down!

Downloads
1,389
Likes
250
Rating
4.91
P
PrintablesSublevel4

Honeycomb Storage Wall screwdriver holder

I love the Honeycomb Storage wall. I was transitioning from my peg board and I couldn't find a holder for my screwdrivers that worked like I wanted, so I made one. Nothing fancy but it works like I wanted it to.

Downloads
1,371
Likes
214
Rating
4.83
P
PrintablesEltord

LTT Screwdriver Skadis Hanger

I needed a way to hang my new LTT Screwdriver on the Skadis pegboard that I have in my office. This just holds it vertically and it fits inside an angled hole that helps hold it vertical and keeps it from falling over. I've created a…

Downloads
1,361
Likes
145
Rating
4.88
P
PrintablesG4ZO

Ratchet screwdriver (Print in place)

In version 3 The bit can be inserted up to halfway. In version 4 you can insert the bit all the way inside, so that greater torque can be applied before it fails. Version 5 has an upgraded hole for the bit, and also a place to add A small…

Downloads
1,319
Likes
210
Rating
4.67
P
PrintablesBrian.Kuo

SKADIS Screwdriver Holder

Designed to fit a Stanley changeable head screwdriver, your mileage may vary. Make sure to check the dimensions of your screwdriver against this model before printing! You can use TinkerCAD or some other quick modeling software. There's…

Downloads
1,300
Likes
158
Rating
4.91
P
PrintablesErer2001

NOT - LTT Screwdriver - Fancy

GENERAL INFO I separated into 2 version: SIMPLE → https://www.printables.com/model/580064 In this alternative version the screwdriver body is a single color (You can still do color swap. Nobody can stop that…) and the cap is fixed so it's…

Downloads
1,293
Likes
625
Rating
4.83
P
PrintablesMeister Edel

Universal self locking fastener (Screwdriver, Cables, etc.)

Heyho I really haven't found a 100% satisfactory solution yet to keep my cordless screwdriver in continuous operation. (Mine doesn't have a factory fitted locking function for this and Velcro wears out quickly) Today I designed this…

Downloads
1,243
Likes
618
Rating
4.93
P
PrintablesJeremy White

Gridfinity Wera Screwdriver Tray

This was to hold a set of 12 Wera stainless screwdrivers. The tools were a gift but they look like this set available on Amazon or at Sears.

Downloads
1,212
Likes
203
Rating
5
P
PrintablesWarlock Til

Multiboard screwdriver mount

Slicer settings and other info: 0.4mm nozzle 0.2 layer height PLA Supports enabled (tree supports) 15% gyroid infill Holes centers are placed 30mm apart for the big mount, and 25mm apart for the medium sized one. All files are available…

Downloads
1,212
Likes
149
Rating
5
P
PrintablesAntoine

HSW honeycomb Screwdriver holder remix

This screwdriver holder works really well. Fits all kinds of size and shapes. Just click your tool in and grab it when you need it. For me it is also important that my screwdrivers are hanging straight and not dangling around. I printed…

Downloads
1,200
Likes
170
Rating
4.89
P
PrintablesJouni Lindqvist

Honeycomb wall screwdriver holders

Screwdriver holders which fit Wera size #0, #1, #2, #3 for honeycomb storage wall but will probably fit a lot of other models also. I used layer height 0.2 mm, 3 walls and infill 30% with regular PLA It is a tight fit into the socket, you…

Downloads
1,166
Likes
247
Rating
5