Weed removal tool
A tool to remove weeds
Print approx. €4.69–€5.74 excl. taxPreliminary estimate for one variant
- Downloads
- 43
- Likes
- 7
- Rating
- 0
332 models
A tool to remove weeds
Print approx. €4.69–€5.74 excl. taxPreliminary estimate for one variant
print with 100% infill out of something as strong as PETG or stronger… these are made to break but we have gotten more time from the printed replacements than the original part. Brim is a must, its a small part with a small footprint.…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
inspired by some models on thingiverse, but upgraded, some changes were made. It works great! Honestly haven't find better grinder yet. Infill 10-15% is more than enough but you can go with more, depends on how you want your grinder to be…
Toothless grinder with storage Now updated with inside corner chamfer PLEASE USE A FOOD SAFE MATERIAL FOR PRINTING
I used the original for a while but it was always a bit hard to maneuver for me, especially if I'm trying to be careful or scraping the bottom of a jar. I hardly ever used the pick side so I just turned it into a T-handle for better…
1kg spool holder 1Kg spool holder large version https://www.buymeacoffee.com/teto121119u
Simple and easy to print! Tool to help with weeding circuit designs.
HAPPY WEED LEAF - WALL ART
Do you own a Cricut or any other similar machine? Well then you're familiar with weeding and know how annoying it is to always have to clean those small sticky pieces of vinyl off of your weeding tool! With this ring type tool, you can…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
Nothing special needed with this, print, it's quick.
2 colour grinder with palm tree print. Print with min 40% infill or higher. No need to print with support. You ned to have 10mmx10mm magnet and 10mm washer for the screw (thin).
A simple shovel for all your scooping and packing needs! The front is a shovel to scoop your “herbs” and the rear is a flat packing tool to pack it down.
The source marked this model as adult content.
I enjoy Pokemon and wanted to try a "flexi" model. Weedle is a classic and allows for me to try making a flexi-model. As of 7/13/23 the “Weedle v4” has the best results, though it doesn't wiggle as much as I wanted (but it can be printed…
Small Tool with a poking stick on one side and a mini-shovel on the other side. ---- Available in two versions: Short - 75mm Long - 100mm Print Settings Printer brand: Creality Printer: K1 Max Rafts: No Supports: No Resolution: Any…
Tweedledee and Tweedledum are fictional characters in an English nursery rhyme and in Lewis Carroll's 1871 book Through the Looking-Glass, and What Alice Found There. Tweedledee and Tweedledum appear in the 1951 version of Alice in…
Printed in TPU 95a Printed on Bambu Labs X1C Settings Layer Height 0.2mm Nozzle Size 0.4mm Material Type TPU / PLA / PETG Infil Density 15 Infil Pattern Gyroid Wall Count 3
I created this to keep my DCST922 string trimmer up on the wall. It can be hung with the trimmer folded, facing either direction. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with…
Spike is removable as with time the spike will wear down with time. I recommend using 100% infill for the spike as otherwise it can break while screwing it into the bowl. Other than that I used .2 layer height and had no issues with the…
Box for smoker and smoke tools :-)
Do you love weed? Category: Keychains
Small Weed tray Hold essentials for me and added a bottom to allow picking up without everything coming out. The G-code is from prusa slicer for creality ender 3 and has some weird top and bottom layer patterns that definitely add a lot…
There is no plastic-on-plastic contact in the mauling chamber, as a gap provided for the herb to pass through eliminates the possibility of printed parts wearing plastic into your collected herb. Uses (5x each) M3x20 SHCS and nuts…
Always got dirty hands when you just want to do some weeding in your garden? Not anymore! Ok, for most people this job isn't always a fun thing to do, but with this tool it is easier than ever + it won't get your hands dirty if you want…
Překombinováno vertexama takže trošku větší soubor . Pokemonum zdar !
Decided that there should be more uses for a weed leaf, other than smoking 🚬 So i removed the keychain hole and made an icon! For people who want to print a tiny logo and stick it everywhere around your work - or home, I dont judge.
SMOKE WEED FACE - WALL ART
The source marked this model as adult content.
I built this model to use Parkside battery with a Kärcher string trimmer (weedwacker). It slides into the Kärcher tool, then the Parkside battery slides into it. The battery contacts are made from Faston terminals: 2x Faston tab for the…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Small box to wipe off the offcuts from the weeding tool. The…
100% Infill 0,10 Layer Make it in Geetech Glow in the Dark Green
Made for my wife for VDay and her love of MJ. Printed on Ender 3 with PLA. No Supports.
This is a wheel guide you can attach to your weed eater (whacker, trimmer) to make it easy for you to trim the edges of your lawn where it meets the sidewalk. This should work on most trimmers that have about a 1 (or 3/4) inch diameter…
Spring has sprung, and a lot of weeds have sprung up with it. Without the use of weed killer, removing weeds from a garden before planting can be a time consuming task. This tool helps with hard to remove weeds by loosening their roots!…
When printing the body, I recommend adding a brim for better adhesion
I was looking for a container to store my milkweed for my wind checkers (Milkweed) when I go deer hunting. I know that a plastic bag is one option but I wanted to try something else to fit my pack. I used this print and remixed the…
A simple but effective pre-press to increase rosin yields and press more material at once. Optimized for the 51mmx89mm bags from Graveda. I did not make this model, it's just a reupload from Thingiverse:…
One of the coolest things you could ever put in an aquarium Floating plants. They are great for your little ecosystem and creating shade for shy fish, but they have a drawback they grow insanely fast with some species able to duble its…
I dunno, I just decided I need a reef wreath. Here are seaweed reed studs for @MagnumDanger's giant LEGO wreath. Printed with supports. Thank you @saracha42 for the original models. Wreath can be found here:…
Wenns jemand gedruckt hat gerne Foto hochladen ich selber habs noch nicht gedruckt aber ist in arbeit
tray for holding smoking accessories clipper lighter hole needs to be enlarged by .75 mm.
Weed wizard for Bongcloud420. It moves (without capture) one step diagonally, but can capture like rook, knight and bishop. It can also en passant any piece that crosses its capture paths. Source:…
Dieses Teil verhindert, dass die Spindel der Z-Achse wobbelt
Because my second little printer Bresser raptor 3D ( or TINA2 ) has only holder for 0.5 kg filament so I decided to make a better coil holder which is 1kg and of course bigger. I recommend printing from PETG material to a line thickness…
Print 2x of Inner and Outer pieces. T11_sup_Inner.stl and T11_sup_Outer.stl have custom supports already included. use T11_Inner.stl and T11_Outer.stl if you want to generate your own supports. Thin walls or Arachne is required for the…
A simple wall mount for the Greenworks 80V Leaf Blower or Weed Whacker. It will support the tool+battery. Only tested with PLA. But has held up to 4+ sweltering summers (easily above 110F in the garage for weeks). Print Settings Printer…
Simple threaded round storage for weed. Print marijuana leaf down on bed. PRINTING SETTINGS Rafts: No Supports: No Resolution: 0.20 mm Infill: 30% Filament brand: doesn't matter Filament material: PLA/PETG PRINTING TIME CAP: 1h 11min…
This design is an upgrade for the spool holder in the TINA2. The holder will have some problems with the bigger spools since the height of the printer is small to start. Instead of giving it more height for clearance I chose to use the…
💨 Get Ready to Leaf Your Worries Behind! 💨 Hey there, fellow plant enthusiasts! Just in time for 4/20, I've cooked up something special: the "Highly Functional" Weed Leaf Keychain! This isn't just any keychain; it's a tiny tribute to the…
I created this storage case for the Manscaped Lawn Mower 5.0 and Weed Whacker 2.0 that I purchased as part of their Platinum Package 5.0 Ultra. All the tools that came with this kit fits inside a 3x5 Gridfinity storage bin. Included are…
Ein Spachtel um eure 3D drucke von eurer Platte zu lösen , natürlich mit dem Weed the Beat Logo
Hello, weed limit sign. Thanks for your download, enjoy the print!
If you already have the container from Uko printed, you just have to print the new Top version. Do you own a Cricut or any other similar machine? Well then you're familiar with weeding and know how annoying it is to always have to clean…
PRINCESS WEED - WALL ART
The Weedo Tina2 have a 100x105 bed and this remix of the original Mini Spool holder use the full volume to provide the maximum distance between the bearings (no change vs. original).
Mal ein neues Funny Weed von Weed the Beat. Wenn ihr mehr davon möchtet oder Vorschläge habt dann Klickt aufs Herzchen und lasst ein Kommentar da.
Text can be customized in the Slicer. (only with .3mf) For multicolor just change filament after 3 mm.
Holds finely ground bud for refilling vaporizers on the go. 1.8g with room. Inner may want to be lightly sanded to make a smoother slide. A bent paperclip is used to make a handle for the cap. It is heated and pressed into place.…
SCROUGE - Mc WEED - WALL ART
weed token for shopping trolley
I downloaded and printed for a friend and personalized it for him. If you use the top file that has the Name on it all you need to do is change the name. You will also want 2x - 5mm X 2mm Magnets. See LoXiRe for a box with an extra…
Could not get my girlfriend into 3D printing but plotting with a Cricut worked out. Now I can design and print tools for her and I get labels, printed clothing etc in return. This is a little bin to put on your fingers. No need to reach…
Print Settings Printer brand: Zortrax Printer: M300Plus Rafts: Yes Supports: No Resolution: 0.2 mm Infill: 100% Filament brand: Zortrax Filament color: White Filament material: ABS-2
02-26-2025 - Updated Plate to improve fitment 2 Piece Aquarium Algae Feeder. Great to keep your Triggers, Tangs, Angels, and many other marine fish happy in your tank. Simply open and place dried seaweed on screen and secure backing plate…
I designed this tray to help with the removal of duckweed from a fish tank. I had an issue with some plants that brought in a plantlet of duckweed with them which as you may be aware can run away quickly. The plants I have (as seen in the…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Elevate your space with CBD elegance! Introducing our CBD Molecule Decoration – a sleek 3D sculpture that combines science and style. Perfect for desks, shelves, or as a unique gift. Transform your surroundings with the calming vibes of…
Solid mount to store your weed wackers..
I modified my earlier version to more closely resemble my other DeWalt wall mounts. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with PLA @ 20% infill, and using Prusa Slicers…
Please read this before any use of the font. ----------------------- This font is for PERSONAL USE ONLY: Do not under any circumstances use the font in public media unless permission is given from designer 3D-Druckwelt or legal reseller.…
The original model was too big for my needs so I scaled it down to 75%. The bottom and top were always separating in my pocket and making a mess. So I designed a new version with embedded 3x6mm magnets in the bottom and top. Make a pause…
This model has two doob tubes, a wind resistant rolling perch enclosure, storage for 2 packs of king sized papers or 1 pack of raw and roach, a slide into place locking mechanism that doubles as a clipper holder and is perfect for when…
Mini Drippy Weed Drum - Scaled down 1/8ths 3 Parts
As I was trying to pull some weeds from my lawn without pulling up the grass, this idea came to me. This tool lets you pull leaves and stems of broadleaf weeds while leaving the grass alone. This does not pull the roots out (maybe it will…
This is a printable Jar with cutouts in the Lid to insert a cheap hygrometer. It also has a place to insert a Hydro-Pack like Boveda to keep the humidity under control. This is modeled to fit a 8g Boveda Pack. It is a little fiddly to get…
i upgraded it so i could insert the magnets from the smoking papers, so it works like an actual grinder.
I wanted a box to help capture the small vinyl pieces while weeding Cricut projects. I found several out there but decided to build my own with an easy-to-use threaded lid. I've included the Fusion 360 file if anyone wants to modify it.…
Hook for Cricut Weeder You need : 1x insert-empty inserts are here : https://makerworld.com/en/models/22521#profileId-27457 Optional: For a better result, you can apply an adaptive layer to the top of the hook. If you want to know more…
we all know that one mf always stealing lighters, with this one its not happening. tips of the leaf are sharp so it hurts to have it in tight pocket. good for inside smoking, not really for carring outside. clipper fits really tight , so…
Eine neue Sammelfigur gibt es ab 50 likes. A new Funny Weed from Weed the Beat. A new collectible figure is available for 50 likes.
General Info This shoulder strap is designed to accomodate a DeWalt cordless wheed whacker, but would likely work with any standard size weed wheed whacker or edge trimmer. The two halves of the clamp attach with M5 hardware (be careful…
Do you hate duck weed? Well look no further! Here's a scopp that'll help take those floating plants out with ease! This one specifically has some colorful language on one side so take it with a grain of salt.
I printed on Creality K1 Material:HyperPLA Time:12min 1pc
Keep your garage or workshop organized with this 3D printable wall mount designed specifically for the Milwaukee M18 Fuel Model 2825-20 Weed Trimmer. The mount is built for easy installation—holes are pre-aligned so you can secure it…
Weedwhacker Garden Gnome – The Lawn’s Last Line of Defense Meet your yard’s new MVP: the Weedwhacker Garden Gnome . Armed with steely focus, stylish shades, and a serious trimmer, this gnome doesn’t just decorate your garden—he defends it…
Dont wanted to buy the Plastic blades anymore, so i designed the Head Trimmer to use Cable from other weed Eaters.
Pretty good air flow but i didnt test in a simulation ! Its kinda hard to clip the duct in the X-bracket but once in it its very solid. Print it at 0.2mm layer height and in about 5 to 10 minutes you will get it ! No support required Good…
Show off your love for the ganja with these 420 themed ear gauges! Printed on Ender 3 v2 in Sunlu Matte Black PLA 200C Nozzle, 70C Build Plate 0.12mm resolution 10% Infill, Gyroid Infill