194 models
This is my Travel Soap Box. This has been tried and tested on many of my travels by both myself and my son. The pictures are of my actual well travelled Soap Box, over 2 years old now. The box holds a full normal size bar of soap, the…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
“Never miss a beat (or a bathroom break)!” “Mix & Relief – Spin tracks, not your bladder!” “The Bathroom Line is longer than your setlist!” 🎧 The Problem: Every DJ has been there. You’re in the middle of an electrifying set, the crowd is…
Print approx. €3.44–€4.20 excl. taxPreliminary estimate for one variant
Simple print-in-place and no supports needed. Combine with graphics or stickers if desired! See my other models for more miniatures!
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
⭐ Foldable 3D Star – transforms into a Christmas Tree when opened A decorative model that combines two holiday themes in one: when closed, it forms a geometric star; when the top element is lifted, it unfolds into an eye-catching, layered…
Print approx. €5.12–€6.25 excl. taxPreliminary estimate for one variant
Thanks to the idea of Surfalex2000, https://www.printables.com/model/462473-prusa-xl-series-nozzle-scrubber-brush-update-inclu/comments Here is my version without screws
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
looks good with a color change best black and white in my opinion.
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
General: Make your point in style Why I designed this: I designed this at my wife's request after she saw a hilarious video on Instagram of someone walking around the house and tapping at annoyances like laundry on the floor, hair in the…
Two kind of hammers for kicking the marbles up to speed in your marble run! The 13mm version uses normal Gravitrax steel balls. The 15mm version uses the larger 15mm steel balls which are also used for the Gravitrax scoop. I ordered both…
The source marked this model as adult content.
This is a lane switcher which causes half of the balls running through the marble track to go left and the other half will travel right. It consists of to parts which can be clicked together to prevent them to be separated when storing…
After getting a request to transform a design into a printable object I've created this trampoline. It's based on the design of Christopher Jeschke which had the smart idea to use a balloon as base part for the trampoline. I've optimized…
IF YOU SPRINKLE WHEN YOU TINKLE BE A SWEETIE AND WIPE THE SEATIE made by MATT GERMAN 100MM X 75.4MM X 3.5MM 0.3 MM LAYER HIGHT 0.8 WALLS
My first attempt with photogrammetry! My mom has this piece of yard art that my wife thought was cute, and I thought might make for a fun project. Scanned with Polycam. It came out great! Please ignore the horrible layer shift halfway up…
The top of the key on my Ford broke off, and the key fell off the keychain. I tried one I downloaded a while ago and it was too tight on the key ring (hole was too small) and it didn't last long. So I modeled the broken key and fit a key…
How to feed only one ball to a cannon or a hammer? Use the 1 pass switch! It allows you to control the ball flow and only feed one ball to either the left or right and let all other balls pass through the other exit. You’ll need this part…
A magnetic starter to release 6 balls (or 12) at once to kickstart an amazing marble run! Two versions included, one for 8x3 magnet discs and another for 5x3 magnet cylinders. I've not tested the 5x3 design yet because I only had the 8x3…
When using the QIDI BOX with the QIDI Q2, a riser is included and the filament inlet on the riser is used instead. The original filament inlet on the Q2 becomes unused. This plug is designed to cover that opening to reduce heat loss from…
Available in three sizes: 40, 30 and 22,5 mm. I recommend printing with a large fill for a better dice feel, but it's not essential. Have a look at my other decision dice:…
Simple bins for use when using a gridfinity base in Ikea Micke computer desk drawers to fill the spare space and keep everything tight. 4cm high
I made this keycap as a replacement for the Windows key for Corsair mechanical keyboards as entry into Prusa's keycap contest. Have fun with printing it! I learned a lot of new stuff making it :)…
If you print in PLA probably you want to take off a sprinter upper cover. I have designed simple rails to put that cover into. In my opinion it looks well and is quite usefull. Goog luck :-)
So you bought a $20 tube of caulking and you're not even going to use 25% of the tube. You've tried a bunch of methods before--using a screw or nail to plug the hole, a smaller cap, cutting the finger off a latex glove and taping it…
Funny Sign - "When a woman says "Correct me if I'm wrong", do not under any circumstances actually do it.", multi colour print, printed in ZIRO PLA Diamond Blue and Sunlu Matte white PLA. For more funny signs see my (growing) collection…
A general note: Generally, I try to avoid using glue sticks and glue products on 3D prints.. but sometimes you really do want that extra assurance that comes with using an adhesive. In particular this is a welcome helper for many ABS/ASA,…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Added a slot w/matching tab to bce.gatien's vertical wind spinner, holds the blades @ 10 degr. rotation one to the next
Mount for the Pluto-IIx HDMI board so it can replace the original Digital AV Port of the GameCube. You can find the board here http://www.knjn.com/ShopBoards_RS232_Parallel.html This is a remix of…
When in doubt, eat bread. I designed this jewelry set as a surprise for Twirlygrl. (Shhhhhhhhh!) Size up or down but watch the size of the post hole. You can also make a necklace or pendant for other forms of jewelry. For the findings to…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Nádoba je vytvořena pro pračku AEG ProSense L6SNE26SC skládá se ze dvou dílů. Průměr 62 mmm. Inspiraci jsem převzal od: https://www.printables.com/model/1536585-lg-washing-machine-pump-filter-drain-bucket The container is made for the AEG…
A minecraft chicken keycap that flaps its wings when pressed. The base of the keycap holds the wings in place, only allowing them to rotate when the button is pressed as the button drags the wing down with it. PLEASE PRINT THIS AT A LOW…
Simple model for your wall. When you love what you have, you have everything you need
Birthday cake fire extinguisher, plus a birthday sign. I've included a couple of print sets which let you print the Tank red and the Hose & Handle in a different colour such as black.
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
The bracket installs below the gutter - use the included drill template and qty 3-6 (3 should be adequate) M5 screws with washers and nuts (and preferably lock washers as well). The modular coupling can be used by itself or joined to…
Jon Bon Jovi - Slippery When Wet - 1986 3D printable model.
I have a System 76 laptop that opens 180 degrees. I needed a laptop stand that would get the keyboard out of the way and raise the monitor to eye level. I have a ASUS ROG Strix 17.3" and Kinesis keyboard and Logitech mouse as my diginal…
makes the back of the g920 racing pedals flat so that if you have it up against a flat surface it doesn't rotate
HDD enclosure, modular case for storing 3.5" drives.HDD enclosure, modular case for storing 3.5" drives. Not a milestone in 3D print design, but definitely a useful companion — and ready to print if needed. It’s not really something you’d…
Reuploaded, to share in printables. This is a remix uploaded on thingiverse.com by mji1983 with the original its based on by Tattoed1980 , download it there to show the support. As of today I got aproval from Tattoed1980 to share it…
I extracted the 3D model for the mug which your character uses in FFXIV and spent a few days adding a lot of detail. This is about as detailed as you would find if you truly went to Eorzea!
Printing at 15% coverage with all support
I had to shorten the Door Latch because it was misplaced for the K1 MAX.
D model description Ever wanted an extra brain… maybe for your desk? This detailed 3D model is perfect as a desktop ornament, geeky decoration, or simply a weird and wonderful object to show off. No need for an excuse – owning a…
The Bob campaign aims to raise awareness of the dangers of drink driving; drivers with high blood alcohol content are at increased risk of car accidents, highway injuries and vehicular deaths. Be safe and think twice!
When to turn on the washing machine and the dryer? I built an electronic advisor with #esphome , connected to #homeassistant , which tells my wife and me in a traffic light style when it is the optimal time to turn on the #washingmachine…
remixed the original model by Compvictor, to latch the glass door, rather than its handle.
Dick Tracy - Kid - "When do we eat?" - 1990 3D printable model.
I stumbled upon the Design by Psyclist and thought it was neat. Printed it aaand noticed it's hard to read because of the angle. So I decided to tilt it back a little. It works better now for my application. I just printed both from PLA…
This 3D model serves as a housing for a device that plays sounds when a person is present in room - see the following YouTube video for details:
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. PLEASE STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
This is a stackable screw mat. I designed it because I kept losing tiny screws while working on electronics projects. The compartments are filleted at the bottom so tiny screws don't get stuck in the corners. I recommend that you print in…
Beer O' Clock! When it's always time for a beer this clock has you covered. Shaped like a bottle cap adds some fun flair to this beer clock that would look great in any game room or home bar. NO AMS REQURED! Just filament swap at the…
I have tested some but not all filament clips and was not really satisfied with any of them, each could do one but not the other. I wanted a clip that would stay firmly on the filament spool and not be an obstacle when unwinding the…
Attention: I keep seeing people selling these models on Esty and eBay: Digital files and actual prints. STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
new sleeves trap and suck in air! squash the new out of your sleeves to have a nice flat deck that won't float away! wow or curved foil foils
When You're Dead, You Don't Know You're Dead. It's Only Difficult For Others. It's The Same Way When You're Stupid Category: Signs & Logos
Hello all, my girlfriend wanted some lights in her closet, so I came up with this simple switch that mounts to the door frame. Can be wired so that lights turn on when the door is opened or vice versa (not sure why you’d do that but you…
Remix of MK3S- Frame Tray from akamaka if you have also mounted the squash balls for vibration and sound reduction from Liouma https://www.printables.com/de/model/227986-squash-ball-feet-the-most-efficient-system-for-pru . Cause of the…
Another Funny Sign - "I miss the 90's when bread was still good for you & nobody knew what kale was", printed in ZIRO Black and Overture Matte White PLA. For more funny signs see my (growing) collection of them here -…
šroub 5x10, matice M5
First of all: THIS THING IS A GUN-HOLDER AND HAS NOTHING TO DO WITH NOT COMPLYING ANY WEAPON LAWS. It is just a storage help for guns! Would you please bear this in mind. I had not enough space in my gun cabinet. Long rifles ok, but…
Slots added to floor of the tray allows better airflow through the tray. When printed with a high-temperature-tolerant filament, this allows the trays to be placed directly into a bead dryer, such as a cheap food dehydrator, without…
I wanted the quickest, simplest, lightest version of a hose plug without any complications. I've printed this at 5% infill and it takes 17 minutes and 3.25 grams of filament. I personally printed 20 in one batch with 0 issues (I have a…
I made these little tags to put on my tires so when I change my winter tires to my summer tires, I know where to rotate the tires.
This is a model that I made in sixth grade of the Parthenon as it was at the time of construction. It is a 1:1000 scale model. A year later I used this model as the foundation for a Beta Club project of the Parthenon as it is now.
This is a remix of the model available here. https://www.printables.com/mode I changed the way it attaches to the table.
https://twitter.com/trevwall/status/1143695664259325954 Then this: https://vinepair.com/booze-news/trevor-wallace-white-claw-truly/ It's like a Pierre that does squats. Print instructions one stl file. use Prusa slicer to modify layers…
A nice pocket fidget coin, that makes an easy gag-gift for those procrastinators in our lives. 'I will get it done when I get around to it" “Well here ya go!” Included Fusion360 file for anyone to remix!
Background and development: My wife is a teacher, she works at a special educations school, teaching children with a lot of special educational needs, mostly combined with a low IQ. She frequently adapts materials and resources that are…
Original Idea - Original Model designed 17 FEB 2023 by Richard T. Anderson ---DO NOT STEAL MY DESIGN / IDEA and compete it in this Competition -- there are no other flying pigs in stl's like this anywhere I have checked. This pig is to be…
Crankshafts can warp while being stored horizontally, print one of these for each main journal & store them safely.
https://www.patreon.com/cw/AndyPaperThings If the first mushroom in the collection is the classic cozy studio, this one clearly had a word with the real estate agent. A tall, solid stone chimney instead of the usual little round pipe, an…
Busy / free indicator when working
A remix with Fusion 360 modifications and add the extended top container to hold more batteries (use glue to glue them together. To increase capacity, simply use your slicer to scale the top piece higher. Adding finger access in case when…
Who hasn't experienced the surprise visits of children abruptly entering the office space during a call, presenting urgent questions or issues that inevitably seem more pressing than your current tasks? Here is the beginning of this…
I CANNOT BE HELD RESPOSIBLE FOR WHAT MY FACE DOES WHEN YOU TALK, sign Category: Signs & Logos
statue when you find a coin on the ground
for my Mini+ I started to use some very nice aluminium extrusion covers: https://www.prusaprinters.org/prints/61545-prusa-mini-aluminum-extrusion-covers But since I added this z-axis support:…
Add a pin or whatever you need and just wear it.
WHEN LIFE GIVES YOU LEMONS... BE GLAD IT WASN'T HERPES, sign Category: Signs & Logos
My wife really liked the travel soap dish, but it was too large for her soap. So I reconstructed it using FreeCAD and made it parametric. I included the file, so you can configure your dish on your own. If you have questions don't…
I had made som larger signs, but concluded that smaller will do fine, especially handy when seed starting inndor. And it prints fast! Very easy to make new version in inventor simply edit the drawing for the ebossed text in the part. The…
When You're Dead, You Don't Know You're Dead. It's Only Difficult For Others. It's The Same Way When You're Stupid Category: Signs & Logos
Assemble all but 5 sides, glue through opening, I used P2-10 and activator. Assemble remaining 5 parts and glue. See photo of assembly. Will snap together once fairy lights inserted into die. If you want to make permanent (non-openable),…
This is part of a larger project to build an enclosure for Prusa MK4. I made this brace to put in place of moved PSU. The Brace includes a block which optionally could be used to connect electrical fork connectors and a cover which would…
IfDisclaimer: I have designed a few rockets. Some work. Some… don't. This one is a more risky/non traditional design, so launch entirely at your own risk. Everyone has been told “yeah, when pigs fly” at one point. I figured it was time to…
So I cut a set pf legs down to 150mm & needed to join them
After 24 iterations I finally have the 95A TPU case I wanted for my iPhone, drivers license, 5 credit cards and one or two folded up bills. It is lighter and smaller than commercial wallet cases, comfortable in the hand, MagSafe charging…
Edit: I re-created the Pillow (Card Cover) for this game per a request. It fits in the insert and is dimensionally VERY close to the original. Please let me know if you have any questions! When I Dream - Boardgame Organizer Notes: No…
Are you tired of the pain of the drudgery of the boring grip? Are you waiting for your lucky day? Well hello lucky nerfers! It's me, your average human and creator specializing and excelling mightily in designing and printing of many…
Here is a list of supplies I used to wire mine. Feel free to comment if you have any questions! https://www.amazon.com/hz/wishlist/ls/18ZSA0U8IPARZ?ref_=wl_share
I am Ubik. Before the universe was, I am. I made the suns. I made the worlds. I created the lives and the places they inhabit; I move them here, I put them there. They go as I say, then do as I tell them. I am the word and my name is…
Office Decoration
Táto kocka má na všetkých stranách okrem jednej šestku a na poslednej päťku.
This is a simple temporary cap used to cover the end of the tube when you are replacing/refilling a water softener tank with new gravel and resin. The cap prevents gravel and resin from getting down inside the tube and the cap is removed…
I have severe CPS (Carpal Tunnel Syndrome) that resulted in severe tendonitis in my wrist and arm. One of the exercises that the physical therapist recommended was twisting my arm while holding onto a handle attached to a rotating disk. I…
6-1-2020 Updated to version 3.0. Previous design was generated from the original mesh and had a few issues that made it not workable for updates. This version is a complete redraw as a solid model but retaining all the same features. Per…
3D Topo map of the Mahu Whenua Traverse from Coronet Peak to Treble Cone showing the positions of the Mountain Turks along the route, as well as the Crown turk off to the East. Print Settings Printer Brand: Anycubic Printer: All-metal…
![Foldable Wall Hook (Print in Place) with Snap When Retracted [Remix] by mji1983 on thingyverse](https://media.printables.com/media/prints/488549/images/3987065_8dead286-f540-4a79-bcb5-fdca98ef1f85/asdasdasda.png)
![TPU folding wallet case for iPhone16 and iPhone16 Pro, holds 6 credit cards, MagSafe, doesn't block camera when opened [OpenSCAD] [Updated]](https://media.printables.com/media/prints/c6a88370-0ca1-4f0b-b413-4f842be6df92/images/12236821_542ca664-7966-4399-8f41-20189a5e3655_edc073fd-6f7f-4b04-b434-88048938acaa/crop_merge1.png)
