64 models
The model consists of car body, larger wheels, smaller wheels, new off-road wheels, robust screws as semi-axles, car key serving as a socket wrench and smaller wrench with handle. It is fun for kids to change the wheels. Try it against…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
This is a real monster from Hell. Based on the good old Jeep with an aggressive off-road chassis. He's a big boy so you'll need a lot of material to build him. NOTE: No supports required. Keep the default orientation of the parts on…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
postup pro sestavení : Montáž jde vcelku snadno přesto pár rad: 1 ) Přidělat znaky hvězd. Pro nasazení znaků je potřeba použít poklep lehkým kladívkem. Na bocích jeepu znak nemusí úplně dosednout. Při tisku se otvor více deformuje než v…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Simple model (1:43) kit card of Bigger model (Bad boy Willys) The recommended material for printing this model is PET-G, because have good plate adhesion. Good adhesion to the bed is a must for correct printing. Individual files included.…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
"Original style" Willys Jeep (1944) Size printed at 100% approximately 165mm long. The body (grill), chassis, wheels and windshield is different from my "Custom" Willys Jeep but the size is the same so you can combine the parts from the…
This is a trailer for my Willys Jeep =) Original style Willys Jeep: HERE Custom Style Willys Jeep: HERE You can also use the big wheels from Custom WILLYS JEEP for this trailer. If you have any questions, let me know in the comments or on…
I made this Custom WILLYS JEEP in Fusion 360 and printed on my Biqu B1. The body, chassi and steering wheel was printed with bed support. Everything else was printed without support. Resolution: 0,2 Supports: Yes Infill: 15% Filament…
Lego Army Jeep Willys 1945
Jeep Willys au format 1/23. Difficile de faire plus petit en gardant les détails. Une mitrailleuse peut être montée : https://www.printables.com/fr/model/687020-m2-browning-50-bmg-123 Jeep Willys in 1/23 format. Difficult to make smaller…
My rendition of a Willys Jeep 1/20 scale. Finally finished printing and assembly. If you downloaded them early a few parts were updated for printability and to add a little strength to hinge points to survive cleanup and assembly. Also…
Please like the model if you download it. It helps. Thanks! 3D print and assemble your own Willys MB Radio Controlled Model, the American Army and allied star jeep of WW2. There are over 130 files to print. They are all included in the…
Please like the model if you download it. It helps. Thanks! Included are the complete assembly of the Tessier.Work Willys MB Radio Controlled in Step and Fusion 360 format. If you want to print it, download the stl files here:…
Willys Jeep chassis and drive train. The chassis provides the frame and pretend suspension for a rolling model of a Willys Jeep. Broke it in two projects, the body and accessories to follow. All parts are PLA except tires and leaf…
Please like the model if you download it. It helps. Thanks! 3D print and assemble your own Willys MB Display Model, the American Army and allied star jeep of WW2. There are over 100 files to print they are all included in the zip files.…
In this Thing I have separated the rim and tyres for my Willys Jeep, so they can be printed in different colors and materials. Original Thing: https://www.thingiverse.com/thing:4834434 Category: Vehicles
WW2 Willys Jeep designed in Fusion 360. I wanted to try my hand at making somewhat detailed tyres.
I am a big fan of Jeep's, and especially the old-school Willys. And Jason from Ossum Designs did an amazing job on his 3D printable Willys. I have printed the Jeep out at 133% for my Axial SCX10 and wanted to try out a small version for…
Here is my Willys MB or Ford GPW 1:18 scale model. The Jeep was produced in 1941 by Willys-Overland for the War Department however by the end of 1941 it was apparent that Willys could not meet demand and Ford began making the GPW. I think…
Please like the model if you download it. It helps. Thanks! 3D print and assemble your own Willys MBT Trailer. The perfect companion for the Willys MB Radio Controlled Model or Display Model in 1/6 scale There are over 30 files to print.…
LEGO JEEP WILLYS 1944 - Invasion
Jeep Willys - PRINT and PLAY This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
LEGO JEEP WILLYS TRAILER
LEGO Jeep Willys Trailer Field Kitchen
This is a remix of Lara Croft. I modified her so she can sit in my Willys Jeep =) Link to original thing: https://www.thingiverse.com/thing:4762153 Link to my Willys Jeep: https://www.thingiverse.com/thing:4834434 Print Settings Printer:…
LEGO JEEP WILLYS LWB LONG
--- UPDATE 2025/07/20: A filament runout sensor holder accessory for the Willyz top spool holder is added. It connects the spool holder from the back accessory section. It allows you to connect the filament directly to the extruder header…
I would suggest printing this with a resin printer. Using a castable resin and casting in metal would also be a great alternative.
LEGO Willys Americar 1941
Huge thanks to @exania for the original Willys Top Spool Holder — this remix wouldn’t exist without your great design! We are reusing the original Creality spool holder that came with your printer. If you’ve misplaced it, you’ll need to…
These adapters simple snap onto the grill and fit the pre-runner lights and rubber grommets from Quadratec. I am unsure which style my Willys grill is, so there is a chance that yours is different. Please check! Pre-runner lights -…
Voici un nouveau crochet de remorque pour la JEEP MB. Ce crochet est sécurisé avec un verrouillage de la remorque; l'ouverture et la fermeture est très simple d'utilisation Here is a new trailer hook for the JEEP MB. This hook is secured…
This is my first attempt at i very high quality model. Print with the body flat and the wheels vertically. When importing into the slicer import the wheels 5 times. After printing superglue the wheels on.
for printing, flip upside down and add supports in the top. not jeep tested and may need a few prototypes before getting correct size
This parts are intended to be used as replacement for the dummy parts on the ActionBikes brand, Willis Jeep. The retroreflector parts have to be covered with retro reflective material. The Backlight can be fitted with LED lights. You are…
A better center cap for the spare wheel. Category: R/C Vehicles
This parts are intended to be used as replacement for the dash board insert on the ActionBikes brand, Willis Jeep. Can be fitted with LED lights and/or switches. The Cockpit light bars are intended to be used with pieces of 8mm LED…
Stock mount is a bit fragile. It's also hard to dismount M2 Browning BMG. I decided to slightly reshape mount base to embed two strong 6x3mm magnets. Lower part is screwing to Willys Jeep by reusing bottom screw from stock mount. Upper…
Mr. Tessier created the amazing open source Willys Jeep on Printables. I used the STL files to create DXF outlines of the windshield and headlight lenses. I located a PNG file of the original General Electric sealed beam lamp used in 1942…
Hole in dash was too large for new ignition switch. Black PCTG
Hood blocks for Willys flatfender Jeeps, models CJ-2A, CJ-3A and CJ-3B. Modeled from measurements taken from original parts, and found in Jeep forums. File names are the original part number and name from the 1949 and 1959 editions of the…
This parts are intended to be used as replacement for the head light inserts on the ActionBikes brand, Willis Jeep. Can be fitted with LED lights. You are going to find the .step for download too if you want to modify this part. Please…
A holder for the lifters from a Willys Jeep L134 Go Devil or F134 Hurricane Engine.
I used a soldiering iron to heat each terminal up to 250C then pressed them in. Also used a little bit of super glue to make sure they wouldn't loosen up.
This part is intended to be used as replacement on the ActionBikes brand, Willis Jeep. This handle is much more ergonomic than the original one. You are going to find the .step for download too if you want to modify this part Printing:…
Old Willys diesel jeep badge in the form of shotshell brass. Fits antenna hole. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Yes Supports: Yes Resolution: 0.2 mm Infill: 25% Filament: 3d Solutech PLA Black Category:…
A friend is re-building a 1933 Willys Jeep and asked me to design and print a headlight adapter. I used white PCTG
Project: MAv2.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual…
Project: CJ2Aviod.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x125.07mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
A simple Jeep Willys WW2 model I made using Tinkercad for a 3D designing competence. I haven't printed it yet, but once I do I'll make sure to include it on the images.
Stock mount is a bit fragile. It's also hard to dismount M2 Browning BMG. I decided to slightly reshape mount base to embed two strong 6x3mm magnets. Lower part is screwing to Willys Jeep by reusing bottom screw from stock mount. Upper…
This parts are intended to be used as replacement for the head light inserts on the ActionBikes brand, Willis Jeep. Can be fitted with LED lights. You are going to find the .step for download too if you want to modify this part. Please…
This parts are intended to be used as replacement for the dummy parts on the ActionBikes brand, Willis Jeep. The retroreflector parts have to be covered with retro reflective material. The Backlight can be fitted with LED lights. You are…
This part is intended to be used as replacement on the ActionBikes brand, Willis Jeep. This handle is much more ergonomic than the original one. You are going to find the .step for download too if you want to modify this part Printing:…
This parts are intended to be used as replacement for the dash board insert on the ActionBikes brand, Willis Jeep. Can be fitted with LED lights and/or switches. The Cockpit light bars are intended to be used with pieces of 8mm LED…
This is my first attempt at i very high quality model. Print with the body flat and the wheels vertically. When importing into the slicer import the wheels 5 times. After printing superglue the wheels on.
for printing, flip upside down and add supports in the top. not jeep tested and may need a few prototypes before getting correct size
Get commercial license and download newest models- https://www.patreon.com/goodesign Download Jeep trailer - https://cults3d.com/en/3d-model/game/foldable-willys-jeep-trailer With the request and high vote from FAB365.net 's request page,…
Vintage Vehicles - 1941 Willys MB Jeep 3D printable model.
